Unlocking Audio Potential: Using Audacity Effectively for Your Podcasts

Free audio recording & editing software audacity for podcasts is available for Windows, Linux, & macOS. Even though it’s not expressly built for podcasts, it is a popular option for recording podcasts. If you don’t mind a steep learning curve, you can easily record, edit, & export a high-quality podcast with this software.

How to Record a Podcast using Audacity

Despite its complexity, audacity for podcasts doesn’t need a detailed understanding of the software’s internals to begin using it. As a beginner, we explain all of the initial settings and basic editing choices you’ll need to know and how to output in a format that can be used for podcasting.

Here’s how to get started recording your podcast using Audacity for Podcasts:

• By selecting the box to the left of your microphone, you may choose your audio host. Select MME for Windows and Core Audio for Mac OS X.

• Select the audio interface or microphone from the menu to the right of the microphone icon. In order to record your Audacity for Podcasts, Audacity utilizes the device that you pick from this menu.

• Select your headphones by checking the box to the right of a speaker symbol. To playback, the audio files, Audacity for Podcasts utilizes the device you specify from this option.

What you need to know about Audacity’s Input Tester

Test your input before you begin recording your podcast. This helps you to make totally clear that everything is set up properly and that your podcast is recorded.

• The monitor meter may be found on the menu bar at the very top, at the very center. “Click to begin monitoring” is what it says.

• Speak normally into the microphone you’ve placed on your computer.

• Ensure that the Microphone Volume meter doesn’t go over -12dB by adjusting the volume controls.

Audacity for Podcasts Recording Tutorial

Audacity recording is simple after you’ve set up all of the settings you need. Make sure to pick just one (Mono) Recording Channel while you’re recording with a single microphone.

Each microphone is assigned a separate audio channel if you have numerous microphones connected to an audio interface or mixer. There must be a separate microphone and channel for each participant on your podcast so that you can edit them separately and make sure they all sound well together.

Each of these mono channels will be blended into stereo when you export your podcast later.

There is nothing complicated about the actual recording procedure.

• To begin recording your podcast, press the red Record button.

• When you’ve finished recording your podcast, press the black Stop button.

• Once you’ve finished recording, use Ctrl+S to save the project. If Audacity crashes or you shut it by mistake, you won’t be able to recover your edited audio file.

Using Audacity to Edit Your Podcast

Audacity for Podcasts not only allows you to record your podcast, but it also allows you to edit it afterward. It is possible to send your raw podcast to the internet as soon as you complete the recording, but editing may add a degree of polish that makes it more pleasurable for the listener.

You may use Audacity to re-arrange your podcast’s flow by cutting and relocating portions, reducing clipping, and even deleting background noise if one of your mics was too near or someone was talking too loudly. Audacity can even alter the levels of individual recordings.

Some of these editing chores are more difficult than others, but if you just have high-quality equipment & have your settings ideal, the podcast may not need a lot of effort. Check over a few different portions of your podcast to get a sense of how much work has to be done on it before publishing.

In Audacity, you may add music, clips, & sound effects to your podcast intro and outro.

In Audacity, add music, clips, & sound effects for the podcast intro and outro

In Audacity, you may add & move sound clips, such as intro music.

• Click File > Import > Audio or press Ctrl+Shift+I to import your podcast audio into Audacity.

• Make your choice of music for the opening, outro, or anything else you’d want to include.

• It is possible to go back and forth between the past and future by clicking on the top toolbar’s time shift function.

• When your opening music stops, click and drag the main podcast audio track so that it begins when the music ends.

• Add an outro or other sound effects & music that play throughout your podcast by following these similar instructions. There should be a separate channel for each sound file so that they may be easily moved across devices.
• Using the time shift tool, you may relocate an outro to the conclusion of your podcast if necessary. If you wish to add sound effects or music to your podcast, use the time shift tool to move them around.
• To test whether your audio tracks are positioned appropriately, just click the green Play button at any moment. The cursor icon in the toolbar may be used to start listening to a podcast at a different place in the track.

In Audacity, here’s how to export your podcast

After you’ve finished editing your podcast, listen to it one more time to ensure you’re satisfied with the outcome, then save it to ensure you don’t lose your work if anything goes wrong during the export process. When you export your podcast, you’re creating an audio file that you can publish to your podcast host and share with others.

Here’s how to export the Audacity podcast:

• Select File > Export > Export as… from the File menu.
• After giving your podcast a name, click Save.
• If you wish to add metadata, you may do so now, or just hit OK to begin the exporting process.
• This procedure may take a long time if the podcast is lengthy or your machine is sluggish. During this procedure, keep your computer turned on & prevent it from sleeping and hibernating.
• You’re ready to publish your podcast to the podcast host once it’s finished exporting.

Conclusions

For recording, editing, & mixing your own podcast, an Audacity is a great option. And, like many podcasters, you could discover it meets your long-term requirements. With regard to voice effects, we talk about how people may use Filmora to modify and improve their voices. Filmora has the ability to re-speak video and audio, as well as previously recorded voiceovers. Video, audio, and voiceover files may all benefit from the Timeline’s Pitch feature. Change the tonality of a video or recording to give it a unique sound. It’s easy to replace the voices in the videos using Filmora. A video or narrative should accompany your viral in order for it to be effective. Changing Pitch allows you to alter the pitch of your voice. You may modify the pace of the video to alter the voice (Optional). Make a backup copy of the altered media.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• Select the audio interface or microphone from the menu to the right of the microphone icon. In order to record your Audacity for Podcasts, Audacity utilizes the device that you pick from this menu.

• Select your headphones by checking the box to the right of a speaker symbol. To playback, the audio files, Audacity for Podcasts utilizes the device you specify from this option.

What you need to know about Audacity’s Input Tester

Test your input before you begin recording your podcast. This helps you to make totally clear that everything is set up properly and that your podcast is recorded.

• The monitor meter may be found on the menu bar at the very top, at the very center. “Click to begin monitoring” is what it says.

• Speak normally into the microphone you’ve placed on your computer.

• Ensure that the Microphone Volume meter doesn’t go over -12dB by adjusting the volume controls.

Audacity for Podcasts Recording Tutorial

Audacity recording is simple after you’ve set up all of the settings you need. Make sure to pick just one (Mono) Recording Channel while you’re recording with a single microphone.

Each microphone is assigned a separate audio channel if you have numerous microphones connected to an audio interface or mixer. There must be a separate microphone and channel for each participant on your podcast so that you can edit them separately and make sure they all sound well together.

Each of these mono channels will be blended into stereo when you export your podcast later.

There is nothing complicated about the actual recording procedure.

• To begin recording your podcast, press the red Record button.

• When you’ve finished recording your podcast, press the black Stop button.

• Once you’ve finished recording, use Ctrl+S to save the project. If Audacity crashes or you shut it by mistake, you won’t be able to recover your edited audio file.

Using Audacity to Edit Your Podcast

Audacity for Podcasts not only allows you to record your podcast, but it also allows you to edit it afterward. It is possible to send your raw podcast to the internet as soon as you complete the recording, but editing may add a degree of polish that makes it more pleasurable for the listener.

You may use Audacity to re-arrange your podcast’s flow by cutting and relocating portions, reducing clipping, and even deleting background noise if one of your mics was too near or someone was talking too loudly. Audacity can even alter the levels of individual recordings.

Some of these editing chores are more difficult than others, but if you just have high-quality equipment & have your settings ideal, the podcast may not need a lot of effort. Check over a few different portions of your podcast to get a sense of how much work has to be done on it before publishing.

In Audacity, you may add music, clips, & sound effects to your podcast intro and outro.

In Audacity, add music, clips, & sound effects for the podcast intro and outro

In Audacity, you may add & move sound clips, such as intro music.

• Click File > Import > Audio or press Ctrl+Shift+I to import your podcast audio into Audacity.

• Make your choice of music for the opening, outro, or anything else you’d want to include.

• It is possible to go back and forth between the past and future by clicking on the top toolbar’s time shift function.

• When your opening music stops, click and drag the main podcast audio track so that it begins when the music ends.

• Add an outro or other sound effects & music that play throughout your podcast by following these similar instructions. There should be a separate channel for each sound file so that they may be easily moved across devices.
• Using the time shift tool, you may relocate an outro to the conclusion of your podcast if necessary. If you wish to add sound effects or music to your podcast, use the time shift tool to move them around.
• To test whether your audio tracks are positioned appropriately, just click the green Play button at any moment. The cursor icon in the toolbar may be used to start listening to a podcast at a different place in the track.

In Audacity, here’s how to export your podcast

After you’ve finished editing your podcast, listen to it one more time to ensure you’re satisfied with the outcome, then save it to ensure you don’t lose your work if anything goes wrong during the export process. When you export your podcast, you’re creating an audio file that you can publish to your podcast host and share with others.

Here’s how to export the Audacity podcast:

• Select File > Export > Export as… from the File menu.
• After giving your podcast a name, click Save.
• If you wish to add metadata, you may do so now, or just hit OK to begin the exporting process.
• This procedure may take a long time if the podcast is lengthy or your machine is sluggish. During this procedure, keep your computer turned on & prevent it from sleeping and hibernating.
• You’re ready to publish your podcast to the podcast host once it’s finished exporting.

Conclusions

For recording, editing, & mixing your own podcast, an Audacity is a great option. And, like many podcasters, you could discover it meets your long-term requirements. With regard to voice effects, we talk about how people may use Filmora to modify and improve their voices. Filmora has the ability to re-speak video and audio, as well as previously recorded voiceovers. Video, audio, and voiceover files may all benefit from the Timeline’s Pitch feature. Change the tonality of a video or recording to give it a unique sound. It’s easy to replace the voices in the videos using Filmora. A video or narrative should accompany your viral in order for it to be effective. Changing Pitch allows you to alter the pitch of your voice. You may modify the pace of the video to alter the voice (Optional). Make a backup copy of the altered media.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• Select the audio interface or microphone from the menu to the right of the microphone icon. In order to record your Audacity for Podcasts, Audacity utilizes the device that you pick from this menu.

• Select your headphones by checking the box to the right of a speaker symbol. To playback, the audio files, Audacity for Podcasts utilizes the device you specify from this option.

What you need to know about Audacity’s Input Tester

Test your input before you begin recording your podcast. This helps you to make totally clear that everything is set up properly and that your podcast is recorded.

• The monitor meter may be found on the menu bar at the very top, at the very center. “Click to begin monitoring” is what it says.

• Speak normally into the microphone you’ve placed on your computer.

• Ensure that the Microphone Volume meter doesn’t go over -12dB by adjusting the volume controls.

Audacity for Podcasts Recording Tutorial

Audacity recording is simple after you’ve set up all of the settings you need. Make sure to pick just one (Mono) Recording Channel while you’re recording with a single microphone.

Each microphone is assigned a separate audio channel if you have numerous microphones connected to an audio interface or mixer. There must be a separate microphone and channel for each participant on your podcast so that you can edit them separately and make sure they all sound well together.

Each of these mono channels will be blended into stereo when you export your podcast later.

There is nothing complicated about the actual recording procedure.

• To begin recording your podcast, press the red Record button.

• When you’ve finished recording your podcast, press the black Stop button.

• Once you’ve finished recording, use Ctrl+S to save the project. If Audacity crashes or you shut it by mistake, you won’t be able to recover your edited audio file.

Using Audacity to Edit Your Podcast

Audacity for Podcasts not only allows you to record your podcast, but it also allows you to edit it afterward. It is possible to send your raw podcast to the internet as soon as you complete the recording, but editing may add a degree of polish that makes it more pleasurable for the listener.

You may use Audacity to re-arrange your podcast’s flow by cutting and relocating portions, reducing clipping, and even deleting background noise if one of your mics was too near or someone was talking too loudly. Audacity can even alter the levels of individual recordings.

Some of these editing chores are more difficult than others, but if you just have high-quality equipment & have your settings ideal, the podcast may not need a lot of effort. Check over a few different portions of your podcast to get a sense of how much work has to be done on it before publishing.

In Audacity, you may add music, clips, & sound effects to your podcast intro and outro.

In Audacity, add music, clips, & sound effects for the podcast intro and outro

In Audacity, you may add & move sound clips, such as intro music.

• Click File > Import > Audio or press Ctrl+Shift+I to import your podcast audio into Audacity.

• Make your choice of music for the opening, outro, or anything else you’d want to include.

• It is possible to go back and forth between the past and future by clicking on the top toolbar’s time shift function.

• When your opening music stops, click and drag the main podcast audio track so that it begins when the music ends.

• Add an outro or other sound effects & music that play throughout your podcast by following these similar instructions. There should be a separate channel for each sound file so that they may be easily moved across devices.
• Using the time shift tool, you may relocate an outro to the conclusion of your podcast if necessary. If you wish to add sound effects or music to your podcast, use the time shift tool to move them around.
• To test whether your audio tracks are positioned appropriately, just click the green Play button at any moment. The cursor icon in the toolbar may be used to start listening to a podcast at a different place in the track.

In Audacity, here’s how to export your podcast

After you’ve finished editing your podcast, listen to it one more time to ensure you’re satisfied with the outcome, then save it to ensure you don’t lose your work if anything goes wrong during the export process. When you export your podcast, you’re creating an audio file that you can publish to your podcast host and share with others.

Here’s how to export the Audacity podcast:

• Select File > Export > Export as… from the File menu.
• After giving your podcast a name, click Save.
• If you wish to add metadata, you may do so now, or just hit OK to begin the exporting process.
• This procedure may take a long time if the podcast is lengthy or your machine is sluggish. During this procedure, keep your computer turned on & prevent it from sleeping and hibernating.
• You’re ready to publish your podcast to the podcast host once it’s finished exporting.

Conclusions

For recording, editing, & mixing your own podcast, an Audacity is a great option. And, like many podcasters, you could discover it meets your long-term requirements. With regard to voice effects, we talk about how people may use Filmora to modify and improve their voices. Filmora has the ability to re-speak video and audio, as well as previously recorded voiceovers. Video, audio, and voiceover files may all benefit from the Timeline’s Pitch feature. Change the tonality of a video or recording to give it a unique sound. It’s easy to replace the voices in the videos using Filmora. A video or narrative should accompany your viral in order for it to be effective. Changing Pitch allows you to alter the pitch of your voice. You may modify the pace of the video to alter the voice (Optional). Make a backup copy of the altered media.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• Select the audio interface or microphone from the menu to the right of the microphone icon. In order to record your Audacity for Podcasts, Audacity utilizes the device that you pick from this menu.

• Select your headphones by checking the box to the right of a speaker symbol. To playback, the audio files, Audacity for Podcasts utilizes the device you specify from this option.

What you need to know about Audacity’s Input Tester

Test your input before you begin recording your podcast. This helps you to make totally clear that everything is set up properly and that your podcast is recorded.

• The monitor meter may be found on the menu bar at the very top, at the very center. “Click to begin monitoring” is what it says.

• Speak normally into the microphone you’ve placed on your computer.

• Ensure that the Microphone Volume meter doesn’t go over -12dB by adjusting the volume controls.

Audacity for Podcasts Recording Tutorial

Audacity recording is simple after you’ve set up all of the settings you need. Make sure to pick just one (Mono) Recording Channel while you’re recording with a single microphone.

Each microphone is assigned a separate audio channel if you have numerous microphones connected to an audio interface or mixer. There must be a separate microphone and channel for each participant on your podcast so that you can edit them separately and make sure they all sound well together.

Each of these mono channels will be blended into stereo when you export your podcast later.

There is nothing complicated about the actual recording procedure.

• To begin recording your podcast, press the red Record button.

• When you’ve finished recording your podcast, press the black Stop button.

• Once you’ve finished recording, use Ctrl+S to save the project. If Audacity crashes or you shut it by mistake, you won’t be able to recover your edited audio file.

Using Audacity to Edit Your Podcast

Audacity for Podcasts not only allows you to record your podcast, but it also allows you to edit it afterward. It is possible to send your raw podcast to the internet as soon as you complete the recording, but editing may add a degree of polish that makes it more pleasurable for the listener.

You may use Audacity to re-arrange your podcast’s flow by cutting and relocating portions, reducing clipping, and even deleting background noise if one of your mics was too near or someone was talking too loudly. Audacity can even alter the levels of individual recordings.

Some of these editing chores are more difficult than others, but if you just have high-quality equipment & have your settings ideal, the podcast may not need a lot of effort. Check over a few different portions of your podcast to get a sense of how much work has to be done on it before publishing.

In Audacity, you may add music, clips, & sound effects to your podcast intro and outro.

In Audacity, add music, clips, & sound effects for the podcast intro and outro

In Audacity, you may add & move sound clips, such as intro music.

• Click File > Import > Audio or press Ctrl+Shift+I to import your podcast audio into Audacity.

• Make your choice of music for the opening, outro, or anything else you’d want to include.

• It is possible to go back and forth between the past and future by clicking on the top toolbar’s time shift function.

• When your opening music stops, click and drag the main podcast audio track so that it begins when the music ends.

• Add an outro or other sound effects & music that play throughout your podcast by following these similar instructions. There should be a separate channel for each sound file so that they may be easily moved across devices.
• Using the time shift tool, you may relocate an outro to the conclusion of your podcast if necessary. If you wish to add sound effects or music to your podcast, use the time shift tool to move them around.
• To test whether your audio tracks are positioned appropriately, just click the green Play button at any moment. The cursor icon in the toolbar may be used to start listening to a podcast at a different place in the track.

In Audacity, here’s how to export your podcast

After you’ve finished editing your podcast, listen to it one more time to ensure you’re satisfied with the outcome, then save it to ensure you don’t lose your work if anything goes wrong during the export process. When you export your podcast, you’re creating an audio file that you can publish to your podcast host and share with others.

Here’s how to export the Audacity podcast:

• Select File > Export > Export as… from the File menu.
• After giving your podcast a name, click Save.
• If you wish to add metadata, you may do so now, or just hit OK to begin the exporting process.
• This procedure may take a long time if the podcast is lengthy or your machine is sluggish. During this procedure, keep your computer turned on & prevent it from sleeping and hibernating.
• You’re ready to publish your podcast to the podcast host once it’s finished exporting.

Conclusions

For recording, editing, & mixing your own podcast, an Audacity is a great option. And, like many podcasters, you could discover it meets your long-term requirements. With regard to voice effects, we talk about how people may use Filmora to modify and improve their voices. Filmora has the ability to re-speak video and audio, as well as previously recorded voiceovers. Video, audio, and voiceover files may all benefit from the Timeline’s Pitch feature. Change the tonality of a video or recording to give it a unique sound. It’s easy to replace the voices in the videos using Filmora. A video or narrative should accompany your viral in order for it to be effective. Changing Pitch allows you to alter the pitch of your voice. You may modify the pace of the video to alter the voice (Optional). Make a backup copy of the altered media.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Quieting the Chaos: Techniques for Refining and Purifying Digital Audio Online

In most cases, the most typical request you’ll get from video makers is to eliminate the unpleasant noises like rumble or hum from the completed piece of video. When filming, it’s tough to get good audio since the dialogue is often muffled by ambient noise, such as the dreaded whir of an air conditioning unit or fans. When combining and filming sound effects or other design aspects for the video, background noise is often removed.

Fortunately, there are a few approaches that you can take to remove noise from audio Online. You can denoise your video or audio by adding some background music or using audio or video editing software to reduce noise. If you’re looking for a technique to get rid of background noise, this article will serve you well in your quest. Let’s get started!

In this article

01 What Is Audio Noise And Why Is It Harmful?

02 How to Remove Background Noise Online

03 Tips For Removing Background Noise From Audio BEFORE You Record

04 FAQs About Removing Audio Noise From Video Online

Part 1: What Is Audio Noise And Why Is It Harmful?

No definition exists for audio noise; however, it is often defined as background noises such as fans, people chatting, automobiles or trucks going by, buzzing from broken audio wiring, or other ambient sounds that should not be included in your film. Your viewers will be distracted from the crucial information provided by the individual speaking in your video if the audio is too noisy.

Compared to that, noisy audios tend to damage the experience you’re looking for. Consider this: if you’re listening to a voice recording of your manager at work and it’s noisy to a point, you’re unable to make sense of it, you would most probably end up missing out on crucial details.

When it comes to creating a decent video, clear audio goes a long way. But that’s not all there is to it. A clear audio track could be heard in almost all of the videos that received four or five stars for “how correctly did the film accomplish its purpose” and “how did you personally assess the video,” according to the submissions.

Part 2: How to Remove Background Noise Online

There are various ways to eliminate all the background noise from the audio. Below is a list of the best online background noise removers to help you do that.2. Veed.io

Website: https://www.veed.io/

VEED is one of the most super-simple online video editors that cleans up background interference with a single click of the mouse, making it an excellent choice for beginners. There is no need to re-record your audio. There is no need for pricey sound-blocking microphones.

You can quickly eliminate all undesirable background noise from your audio files by using VEED’s background noise remover. VEED can help you remove background noise from any audio file, including MP3, WMA, and more.

No matter what type of audio file you have - MP3, WMA, or more - and no matter what type of background noise you have - wind conditions, vehicular, static, white fan sound - VEED can assist you in wiping clean your audio in a couple of moments.

How to remove background noise from video audio with Veed online?

Step 1: Click on the Choose Audio option to upload your audio file.

Step 2: Click on the audio track to bring up the Settings menu, and then choose ‘Clean Audio.’ Background noise will be eliminated in a matter of seconds by itself.

Step 3: That’s all there is to it; you are finished. When you click on ‘Export,’ your new file will be rendered in seconds.

Pros

• Simple to use
• Offers multiple features (add background music, cut, trim, etc.)
• Three-step process

Cons

• Not too user-friendly

3. Audio Denoise

Website: https://audiodenoise.com/

The number second on our list is the Audiodenoise online noise removal tool. Similar to the first one, it’s time to use, supports multiple files, and most importantly, helps you get rid of the unwanted noise from your audio.

Other than that, the tool offers plenty of customization options, such as time soothing of noise reduction filter, model noise based on noise modulation tracking, analysis block size, etc. So, how can you get rid of the background noise? Follow the steps here!

How to remove background noise online with Audio Denoise?

Step 1: Click on the Choose File option to begin with. You can also select the video from the Demo files option.

Step 2: After uploading the file, press on the Process option to get rid of the unwanted noise from the audio.

Step 3: After the audio is done processing, click on the Download option to export your video to your PC.

Pros

• The straightforward noise reduction process
• Any file of your choice
• Plenty of options to customize audio

Cons

• Takes time to process the video
• Limited to 40MB

4. Audiotoolset

Website: https://audiotoolset.com/noise-reduction

The third one on our list is the Audio Toolset. With its help, this tool may make audio recordings with less background noise. You need to click a few times, and the audio file will be processed for you instantly.

Voice recordings may benefit from using this program, which is designed to remove undesirable noises while maintaining a high level of audio quality.

This program employs a generic noise-reduction method that should operate without any further adjustment for most recordings.

How to reduce background noise from video audio with Audio Tool Set?

Step 1: Click on the Browse Computer or Drag and Drop files to the website to begin the process.

Step 2: After your file has been uploaded, click on the Process option to reduce the noise.

Step 3: Listen to the audio carefully and click on the Download option to export the file to your PC.

Pros

• Excellent user-interface
• Straightforward process
• Great many audio editing features

Cons

• Takes time to process the video
• Limited to 50MB and MP3, WAV, FLAC and oGG format

5. Weet

Website: https://weet.co/remove-background-noise-from-video/

Weet is a video chat solution built for remote teams. It is available for free. Background noise or echoes may interfere with your live meetings, but with Weet asynchronous video, clean audio recording is achievable without sacrificing quality.

If you want to eliminate background noise from your recording, weet is now a tool that can help you accomplish precisely that.

How to remove background noise from video online with Weet?

Step 1: Click “Create Weet“ after you’ve logged in to get started.

Step 2: To access your recording preferences, click the Gear symbol in the lower-left corner of the screen.

Step 3: It’s as simple as clicking the “Activate Noise Cancellation“ switch! Once you begin recording your weet, their AI technology will automatically remove any background noise.

Pros

• Excellent features for professionals
• Straightforward process
• Al tool to eliminate noise from the audio

Cons

• Beginners may find it challenging to use

You may also like: How to reduce audio noise during recording

Part 3: Tips For Removing Background Noise From Audio BEFORE You Record

We all want to get rid of the noisy background from our audio. Follow these tips below to get clean and supreme audio quality:

Tip 1: Avoid Noisy Places

The easiest method to avoid having noisy audio in the first place is to avoid having noisy elements and surroundings in the first place. Recording in a peaceful area is essential for this to be accomplished.

A professional recording studio is not required to get excellent results, but you should choose the quietest room or place that you can locate.

After that, you should get acquainted with the normal ambient noises heard in that location. Is there any outside noise, such as heavy trucks or other traffic? What about the heating and air conditioning systems, for that matter? Is there a sound of the fan turning on and off?

Does it seem like you can hear your co-workers or people conversing in the adjacent rooms? Is there a buzzing sound coming from the fluorescent lighting? Those are just a few examples of the kind of sounds that might appear on your voice-over recording when you record it yourself.

Tip 2: Record A Test

After that, make a practice tape of your room. You do not need to talk. However, it would help if you used the same microphone you will be using for your voice-over recording.

Take 10-20 seconds of the ambient noise in the room and save it to your computer. This is referred to as recording the room tone.

Tip 3: Analyze the Test Recording

After that, put on your headphones and listen to your room tone recording. What sounds do you hear that you can quickly remove from your environment? Suppose you can hear the fan from your heating/cooling system running. You may turn it off while you are recording.

Alternatively, if you hear individuals conversing in the background, you might respectfully request that they transfer their discussion to a more appropriate location. If at all feasible, you should switch off any buzzing lights.

Your room tone recording will also assist you in reducing audio noise once you have completed your recording session. Your room tone recording may serve as a baseline for your audio program, which can then be used to eliminate noise.

Part 4: FAQs About Removing Audio Noise From Video Online

1.Can Background Noise Be Removed From Audio

Yes, the background can be removed from audio easily nowadays, whether it’s after you’ve done recording or before recording audio; there are plenty of online software and applications, both available for your PC and smartphones.

These can help you get rid of the unwanted noise from your audio—some of the best online websites that can help you achieve that have been reviewed above. Choose the one that meets your needs!

2. Is There Anything I Can Do To Prevent Noisy Audio Before I Record?

Prior to recording, it is essential to reduce any acoustic noise sources if at all feasible. During recording, airflow may cause havoc on microphone preamplifiers, resulting in artifacts that may be difficult to remove.

Be careful to utilize adequate windscreens on your microphones, mainly when recording outside. Sound sources such as wind noise, for example, may frequently be discovered and appropriately eliminated by giving them a cursory listen via headphones.

02 How to Remove Background Noise Online

03 Tips For Removing Background Noise From Audio BEFORE You Record

04 FAQs About Removing Audio Noise From Video Online

Part 1: What Is Audio Noise And Why Is It Harmful?

No definition exists for audio noise; however, it is often defined as background noises such as fans, people chatting, automobiles or trucks going by, buzzing from broken audio wiring, or other ambient sounds that should not be included in your film. Your viewers will be distracted from the crucial information provided by the individual speaking in your video if the audio is too noisy.

Compared to that, noisy audios tend to damage the experience you’re looking for. Consider this: if you’re listening to a voice recording of your manager at work and it’s noisy to a point, you’re unable to make sense of it, you would most probably end up missing out on crucial details.

When it comes to creating a decent video, clear audio goes a long way. But that’s not all there is to it. A clear audio track could be heard in almost all of the videos that received four or five stars for “how correctly did the film accomplish its purpose” and “how did you personally assess the video,” according to the submissions.

Part 2: How to Remove Background Noise Online

There are various ways to eliminate all the background noise from the audio. Below is a list of the best online background noise removers to help you do that.2. Veed.io

Website: https://www.veed.io/

VEED is one of the most super-simple online video editors that cleans up background interference with a single click of the mouse, making it an excellent choice for beginners. There is no need to re-record your audio. There is no need for pricey sound-blocking microphones.

You can quickly eliminate all undesirable background noise from your audio files by using VEED’s background noise remover. VEED can help you remove background noise from any audio file, including MP3, WMA, and more.

No matter what type of audio file you have - MP3, WMA, or more - and no matter what type of background noise you have - wind conditions, vehicular, static, white fan sound - VEED can assist you in wiping clean your audio in a couple of moments.

How to remove background noise from video audio with Veed online?

Step 1: Click on the Choose Audio option to upload your audio file.

Step 2: Click on the audio track to bring up the Settings menu, and then choose ‘Clean Audio.’ Background noise will be eliminated in a matter of seconds by itself.

Step 3: That’s all there is to it; you are finished. When you click on ‘Export,’ your new file will be rendered in seconds.

Pros

• Simple to use
• Offers multiple features (add background music, cut, trim, etc.)
• Three-step process

Cons

• Not too user-friendly

3. Audio Denoise

Website: https://audiodenoise.com/

The number second on our list is the Audiodenoise online noise removal tool. Similar to the first one, it’s time to use, supports multiple files, and most importantly, helps you get rid of the unwanted noise from your audio.

Other than that, the tool offers plenty of customization options, such as time soothing of noise reduction filter, model noise based on noise modulation tracking, analysis block size, etc. So, how can you get rid of the background noise? Follow the steps here!

How to remove background noise online with Audio Denoise?

Step 1: Click on the Choose File option to begin with. You can also select the video from the Demo files option.

Step 2: After uploading the file, press on the Process option to get rid of the unwanted noise from the audio.

Step 3: After the audio is done processing, click on the Download option to export your video to your PC.

Pros

• The straightforward noise reduction process
• Any file of your choice
• Plenty of options to customize audio

Cons

• Takes time to process the video
• Limited to 40MB

4. Audiotoolset

Website: https://audiotoolset.com/noise-reduction

The third one on our list is the Audio Toolset. With its help, this tool may make audio recordings with less background noise. You need to click a few times, and the audio file will be processed for you instantly.

Voice recordings may benefit from using this program, which is designed to remove undesirable noises while maintaining a high level of audio quality.

This program employs a generic noise-reduction method that should operate without any further adjustment for most recordings.

How to reduce background noise from video audio with Audio Tool Set?

Step 1: Click on the Browse Computer or Drag and Drop files to the website to begin the process.

Step 2: After your file has been uploaded, click on the Process option to reduce the noise.

Step 3: Listen to the audio carefully and click on the Download option to export the file to your PC.

Pros

• Excellent user-interface
• Straightforward process
• Great many audio editing features

Cons

• Takes time to process the video
• Limited to 50MB and MP3, WAV, FLAC and oGG format

5. Weet

Website: https://weet.co/remove-background-noise-from-video/

Weet is a video chat solution built for remote teams. It is available for free. Background noise or echoes may interfere with your live meetings, but with Weet asynchronous video, clean audio recording is achievable without sacrificing quality.

If you want to eliminate background noise from your recording, weet is now a tool that can help you accomplish precisely that.

How to remove background noise from video online with Weet?

Step 1: Click “Create Weet“ after you’ve logged in to get started.

Step 2: To access your recording preferences, click the Gear symbol in the lower-left corner of the screen.

Step 3: It’s as simple as clicking the “Activate Noise Cancellation“ switch! Once you begin recording your weet, their AI technology will automatically remove any background noise.

Pros

• Excellent features for professionals
• Straightforward process
• Al tool to eliminate noise from the audio

Cons

• Beginners may find it challenging to use

You may also like: How to reduce audio noise during recording

Part 3: Tips For Removing Background Noise From Audio BEFORE You Record

We all want to get rid of the noisy background from our audio. Follow these tips below to get clean and supreme audio quality:

Tip 1: Avoid Noisy Places

The easiest method to avoid having noisy audio in the first place is to avoid having noisy elements and surroundings in the first place. Recording in a peaceful area is essential for this to be accomplished.

A professional recording studio is not required to get excellent results, but you should choose the quietest room or place that you can locate.

After that, you should get acquainted with the normal ambient noises heard in that location. Is there any outside noise, such as heavy trucks or other traffic? What about the heating and air conditioning systems, for that matter? Is there a sound of the fan turning on and off?

Does it seem like you can hear your co-workers or people conversing in the adjacent rooms? Is there a buzzing sound coming from the fluorescent lighting? Those are just a few examples of the kind of sounds that might appear on your voice-over recording when you record it yourself.

Tip 2: Record A Test

After that, make a practice tape of your room. You do not need to talk. However, it would help if you used the same microphone you will be using for your voice-over recording.

Take 10-20 seconds of the ambient noise in the room and save it to your computer. This is referred to as recording the room tone.

Tip 3: Analyze the Test Recording

After that, put on your headphones and listen to your room tone recording. What sounds do you hear that you can quickly remove from your environment? Suppose you can hear the fan from your heating/cooling system running. You may turn it off while you are recording.

Alternatively, if you hear individuals conversing in the background, you might respectfully request that they transfer their discussion to a more appropriate location. If at all feasible, you should switch off any buzzing lights.

Your room tone recording will also assist you in reducing audio noise once you have completed your recording session. Your room tone recording may serve as a baseline for your audio program, which can then be used to eliminate noise.

Part 4: FAQs About Removing Audio Noise From Video Online

1.Can Background Noise Be Removed From Audio

Yes, the background can be removed from audio easily nowadays, whether it’s after you’ve done recording or before recording audio; there are plenty of online software and applications, both available for your PC and smartphones.

These can help you get rid of the unwanted noise from your audio—some of the best online websites that can help you achieve that have been reviewed above. Choose the one that meets your needs!

2. Is There Anything I Can Do To Prevent Noisy Audio Before I Record?

Prior to recording, it is essential to reduce any acoustic noise sources if at all feasible. During recording, airflow may cause havoc on microphone preamplifiers, resulting in artifacts that may be difficult to remove.

Be careful to utilize adequate windscreens on your microphones, mainly when recording outside. Sound sources such as wind noise, for example, may frequently be discovered and appropriately eliminated by giving them a cursory listen via headphones.

02 How to Remove Background Noise Online

03 Tips For Removing Background Noise From Audio BEFORE You Record

04 FAQs About Removing Audio Noise From Video Online

Part 1: What Is Audio Noise And Why Is It Harmful?

No definition exists for audio noise; however, it is often defined as background noises such as fans, people chatting, automobiles or trucks going by, buzzing from broken audio wiring, or other ambient sounds that should not be included in your film. Your viewers will be distracted from the crucial information provided by the individual speaking in your video if the audio is too noisy.

Compared to that, noisy audios tend to damage the experience you’re looking for. Consider this: if you’re listening to a voice recording of your manager at work and it’s noisy to a point, you’re unable to make sense of it, you would most probably end up missing out on crucial details.

When it comes to creating a decent video, clear audio goes a long way. But that’s not all there is to it. A clear audio track could be heard in almost all of the videos that received four or five stars for “how correctly did the film accomplish its purpose” and “how did you personally assess the video,” according to the submissions.

Part 2: How to Remove Background Noise Online

There are various ways to eliminate all the background noise from the audio. Below is a list of the best online background noise removers to help you do that.2. Veed.io

Website: https://www.veed.io/

VEED is one of the most super-simple online video editors that cleans up background interference with a single click of the mouse, making it an excellent choice for beginners. There is no need to re-record your audio. There is no need for pricey sound-blocking microphones.

You can quickly eliminate all undesirable background noise from your audio files by using VEED’s background noise remover. VEED can help you remove background noise from any audio file, including MP3, WMA, and more.

No matter what type of audio file you have - MP3, WMA, or more - and no matter what type of background noise you have - wind conditions, vehicular, static, white fan sound - VEED can assist you in wiping clean your audio in a couple of moments.

How to remove background noise from video audio with Veed online?

Step 1: Click on the Choose Audio option to upload your audio file.

Step 2: Click on the audio track to bring up the Settings menu, and then choose ‘Clean Audio.’ Background noise will be eliminated in a matter of seconds by itself.

Step 3: That’s all there is to it; you are finished. When you click on ‘Export,’ your new file will be rendered in seconds.

Pros

• Simple to use
• Offers multiple features (add background music, cut, trim, etc.)
• Three-step process

Cons

• Not too user-friendly

3. Audio Denoise

Website: https://audiodenoise.com/

The number second on our list is the Audiodenoise online noise removal tool. Similar to the first one, it’s time to use, supports multiple files, and most importantly, helps you get rid of the unwanted noise from your audio.

Other than that, the tool offers plenty of customization options, such as time soothing of noise reduction filter, model noise based on noise modulation tracking, analysis block size, etc. So, how can you get rid of the background noise? Follow the steps here!

How to remove background noise online with Audio Denoise?

Step 1: Click on the Choose File option to begin with. You can also select the video from the Demo files option.

Step 2: After uploading the file, press on the Process option to get rid of the unwanted noise from the audio.

Step 3: After the audio is done processing, click on the Download option to export your video to your PC.

Pros

• The straightforward noise reduction process
• Any file of your choice
• Plenty of options to customize audio

Cons

• Takes time to process the video
• Limited to 40MB

4. Audiotoolset

Website: https://audiotoolset.com/noise-reduction

The third one on our list is the Audio Toolset. With its help, this tool may make audio recordings with less background noise. You need to click a few times, and the audio file will be processed for you instantly.

Voice recordings may benefit from using this program, which is designed to remove undesirable noises while maintaining a high level of audio quality.

This program employs a generic noise-reduction method that should operate without any further adjustment for most recordings.

How to reduce background noise from video audio with Audio Tool Set?

Step 1: Click on the Browse Computer or Drag and Drop files to the website to begin the process.

Step 2: After your file has been uploaded, click on the Process option to reduce the noise.

Step 3: Listen to the audio carefully and click on the Download option to export the file to your PC.

Pros

• Excellent user-interface
• Straightforward process
• Great many audio editing features

Cons

• Takes time to process the video
• Limited to 50MB and MP3, WAV, FLAC and oGG format

5. Weet

Website: https://weet.co/remove-background-noise-from-video/

Weet is a video chat solution built for remote teams. It is available for free. Background noise or echoes may interfere with your live meetings, but with Weet asynchronous video, clean audio recording is achievable without sacrificing quality.

If you want to eliminate background noise from your recording, weet is now a tool that can help you accomplish precisely that.

How to remove background noise from video online with Weet?

Step 1: Click “Create Weet“ after you’ve logged in to get started.

Step 2: To access your recording preferences, click the Gear symbol in the lower-left corner of the screen.

Step 3: It’s as simple as clicking the “Activate Noise Cancellation“ switch! Once you begin recording your weet, their AI technology will automatically remove any background noise.

Pros

• Excellent features for professionals
• Straightforward process
• Al tool to eliminate noise from the audio

Cons

• Beginners may find it challenging to use

You may also like: How to reduce audio noise during recording

Part 3: Tips For Removing Background Noise From Audio BEFORE You Record

We all want to get rid of the noisy background from our audio. Follow these tips below to get clean and supreme audio quality:

Tip 1: Avoid Noisy Places

The easiest method to avoid having noisy audio in the first place is to avoid having noisy elements and surroundings in the first place. Recording in a peaceful area is essential for this to be accomplished.

A professional recording studio is not required to get excellent results, but you should choose the quietest room or place that you can locate.

After that, you should get acquainted with the normal ambient noises heard in that location. Is there any outside noise, such as heavy trucks or other traffic? What about the heating and air conditioning systems, for that matter? Is there a sound of the fan turning on and off?

Does it seem like you can hear your co-workers or people conversing in the adjacent rooms? Is there a buzzing sound coming from the fluorescent lighting? Those are just a few examples of the kind of sounds that might appear on your voice-over recording when you record it yourself.

Tip 2: Record A Test

After that, make a practice tape of your room. You do not need to talk. However, it would help if you used the same microphone you will be using for your voice-over recording.

Take 10-20 seconds of the ambient noise in the room and save it to your computer. This is referred to as recording the room tone.

Tip 3: Analyze the Test Recording

After that, put on your headphones and listen to your room tone recording. What sounds do you hear that you can quickly remove from your environment? Suppose you can hear the fan from your heating/cooling system running. You may turn it off while you are recording.

Alternatively, if you hear individuals conversing in the background, you might respectfully request that they transfer their discussion to a more appropriate location. If at all feasible, you should switch off any buzzing lights.

Your room tone recording will also assist you in reducing audio noise once you have completed your recording session. Your room tone recording may serve as a baseline for your audio program, which can then be used to eliminate noise.

Part 4: FAQs About Removing Audio Noise From Video Online

1.Can Background Noise Be Removed From Audio

Yes, the background can be removed from audio easily nowadays, whether it’s after you’ve done recording or before recording audio; there are plenty of online software and applications, both available for your PC and smartphones.

These can help you get rid of the unwanted noise from your audio—some of the best online websites that can help you achieve that have been reviewed above. Choose the one that meets your needs!

2. Is There Anything I Can Do To Prevent Noisy Audio Before I Record?

Prior to recording, it is essential to reduce any acoustic noise sources if at all feasible. During recording, airflow may cause havoc on microphone preamplifiers, resulting in artifacts that may be difficult to remove.

Be careful to utilize adequate windscreens on your microphones, mainly when recording outside. Sound sources such as wind noise, for example, may frequently be discovered and appropriately eliminated by giving them a cursory listen via headphones.

02 How to Remove Background Noise Online

03 Tips For Removing Background Noise From Audio BEFORE You Record

04 FAQs About Removing Audio Noise From Video Online

Part 1: What Is Audio Noise And Why Is It Harmful?

No definition exists for audio noise; however, it is often defined as background noises such as fans, people chatting, automobiles or trucks going by, buzzing from broken audio wiring, or other ambient sounds that should not be included in your film. Your viewers will be distracted from the crucial information provided by the individual speaking in your video if the audio is too noisy.

Compared to that, noisy audios tend to damage the experience you’re looking for. Consider this: if you’re listening to a voice recording of your manager at work and it’s noisy to a point, you’re unable to make sense of it, you would most probably end up missing out on crucial details.

When it comes to creating a decent video, clear audio goes a long way. But that’s not all there is to it. A clear audio track could be heard in almost all of the videos that received four or five stars for “how correctly did the film accomplish its purpose” and “how did you personally assess the video,” according to the submissions.

Part 2: How to Remove Background Noise Online

There are various ways to eliminate all the background noise from the audio. Below is a list of the best online background noise removers to help you do that.2. Veed.io

Website: https://www.veed.io/

VEED is one of the most super-simple online video editors that cleans up background interference with a single click of the mouse, making it an excellent choice for beginners. There is no need to re-record your audio. There is no need for pricey sound-blocking microphones.

You can quickly eliminate all undesirable background noise from your audio files by using VEED’s background noise remover. VEED can help you remove background noise from any audio file, including MP3, WMA, and more.

No matter what type of audio file you have - MP3, WMA, or more - and no matter what type of background noise you have - wind conditions, vehicular, static, white fan sound - VEED can assist you in wiping clean your audio in a couple of moments.

How to remove background noise from video audio with Veed online?

Step 1: Click on the Choose Audio option to upload your audio file.

Step 2: Click on the audio track to bring up the Settings menu, and then choose ‘Clean Audio.’ Background noise will be eliminated in a matter of seconds by itself.

Step 3: That’s all there is to it; you are finished. When you click on ‘Export,’ your new file will be rendered in seconds.

Pros

• Simple to use
• Offers multiple features (add background music, cut, trim, etc.)
• Three-step process

Cons

• Not too user-friendly

3. Audio Denoise

Website: https://audiodenoise.com/

The number second on our list is the Audiodenoise online noise removal tool. Similar to the first one, it’s time to use, supports multiple files, and most importantly, helps you get rid of the unwanted noise from your audio.

Other than that, the tool offers plenty of customization options, such as time soothing of noise reduction filter, model noise based on noise modulation tracking, analysis block size, etc. So, how can you get rid of the background noise? Follow the steps here!

How to remove background noise online with Audio Denoise?

Step 1: Click on the Choose File option to begin with. You can also select the video from the Demo files option.

Step 2: After uploading the file, press on the Process option to get rid of the unwanted noise from the audio.

Step 3: After the audio is done processing, click on the Download option to export your video to your PC.

Pros

• The straightforward noise reduction process
• Any file of your choice
• Plenty of options to customize audio

Cons

• Takes time to process the video
• Limited to 40MB

4. Audiotoolset

Website: https://audiotoolset.com/noise-reduction

The third one on our list is the Audio Toolset. With its help, this tool may make audio recordings with less background noise. You need to click a few times, and the audio file will be processed for you instantly.

Voice recordings may benefit from using this program, which is designed to remove undesirable noises while maintaining a high level of audio quality.

This program employs a generic noise-reduction method that should operate without any further adjustment for most recordings.

How to reduce background noise from video audio with Audio Tool Set?

Step 1: Click on the Browse Computer or Drag and Drop files to the website to begin the process.

Step 2: After your file has been uploaded, click on the Process option to reduce the noise.

Step 3: Listen to the audio carefully and click on the Download option to export the file to your PC.

Pros

• Excellent user-interface
• Straightforward process
• Great many audio editing features

Cons

• Takes time to process the video
• Limited to 50MB and MP3, WAV, FLAC and oGG format

5. Weet

Website: https://weet.co/remove-background-noise-from-video/

Weet is a video chat solution built for remote teams. It is available for free. Background noise or echoes may interfere with your live meetings, but with Weet asynchronous video, clean audio recording is achievable without sacrificing quality.

If you want to eliminate background noise from your recording, weet is now a tool that can help you accomplish precisely that.

How to remove background noise from video online with Weet?

Step 1: Click “Create Weet“ after you’ve logged in to get started.

Step 2: To access your recording preferences, click the Gear symbol in the lower-left corner of the screen.

Step 3: It’s as simple as clicking the “Activate Noise Cancellation“ switch! Once you begin recording your weet, their AI technology will automatically remove any background noise.

Pros

• Excellent features for professionals
• Straightforward process
• Al tool to eliminate noise from the audio

Cons

• Beginners may find it challenging to use

You may also like: How to reduce audio noise during recording

Part 3: Tips For Removing Background Noise From Audio BEFORE You Record

We all want to get rid of the noisy background from our audio. Follow these tips below to get clean and supreme audio quality:

Tip 1: Avoid Noisy Places

The easiest method to avoid having noisy audio in the first place is to avoid having noisy elements and surroundings in the first place. Recording in a peaceful area is essential for this to be accomplished.

A professional recording studio is not required to get excellent results, but you should choose the quietest room or place that you can locate.

After that, you should get acquainted with the normal ambient noises heard in that location. Is there any outside noise, such as heavy trucks or other traffic? What about the heating and air conditioning systems, for that matter? Is there a sound of the fan turning on and off?

Does it seem like you can hear your co-workers or people conversing in the adjacent rooms? Is there a buzzing sound coming from the fluorescent lighting? Those are just a few examples of the kind of sounds that might appear on your voice-over recording when you record it yourself.

Tip 2: Record A Test

After that, make a practice tape of your room. You do not need to talk. However, it would help if you used the same microphone you will be using for your voice-over recording.

Take 10-20 seconds of the ambient noise in the room and save it to your computer. This is referred to as recording the room tone.

Tip 3: Analyze the Test Recording

After that, put on your headphones and listen to your room tone recording. What sounds do you hear that you can quickly remove from your environment? Suppose you can hear the fan from your heating/cooling system running. You may turn it off while you are recording.

Alternatively, if you hear individuals conversing in the background, you might respectfully request that they transfer their discussion to a more appropriate location. If at all feasible, you should switch off any buzzing lights.

Your room tone recording will also assist you in reducing audio noise once you have completed your recording session. Your room tone recording may serve as a baseline for your audio program, which can then be used to eliminate noise.

Part 4: FAQs About Removing Audio Noise From Video Online

1.Can Background Noise Be Removed From Audio

Yes, the background can be removed from audio easily nowadays, whether it’s after you’ve done recording or before recording audio; there are plenty of online software and applications, both available for your PC and smartphones.

These can help you get rid of the unwanted noise from your audio—some of the best online websites that can help you achieve that have been reviewed above. Choose the one that meets your needs!

2. Is There Anything I Can Do To Prevent Noisy Audio Before I Record?

Prior to recording, it is essential to reduce any acoustic noise sources if at all feasible. During recording, airflow may cause havoc on microphone preamplifiers, resulting in artifacts that may be difficult to remove.

Be careful to utilize adequate windscreens on your microphones, mainly when recording outside. Sound sources such as wind noise, for example, may frequently be discovered and appropriately eliminated by giving them a cursory listen via headphones.

Navigating the Nuances of Noise-Cancelling Sound Effects Using Final Cut Pro X’s AutoDuck Feature

How to Do Automatic Audio Ducking in Final Cut Pro X

Benjamin Arango

Oct 26, 2023• Proven solutions

If you are working in post-production, then you might be familiar with the concept of audio ducking. In nutshell, it is a process in which the background sound of a clip is reduced and the voiceover is amplified. Therefore, with the help of sound ducking, we can focus on the dialogues without a noisy background track.

Lately, a lot of people have asked us about the process to do automatic audio ducking in Final Cut Pro X. Since it is a clip-based editing tool, it lacks a dedicated mixer to help us do FCPX audio ducking. Thankfully, there are third-party plugins and tools (like the FCPX AutoDuck) that can help us do the same. In this post, I will let you know how to do audio ducking in Final Cut Pro and its best alternative.

If you don’t want to use any plugins, see this article: How to sync in FCPX.

Part 1: How to Perform Audio Ducking in Final Cut Pro X?

If you have a video in which you have background music and a voiceover, then you can perform sound ducking in it. This will automatically enhance the quality of the voiceover and would mellow down the background music selectively. Sadly, the feature of audio ducking in Final Cut Pro has to be done manually as there are no instant automatic options in the tool presently.

Therefore, you can use any reliable third-party FCPX tool like Audified or AutoDuck to meet your requirements. For instance, let’s consider the example of FCPX AutoDuck, which is a paid macOS application. To perform FCPX audio ducking, you first have to export the music and voiceover as two dedicated files. Later, you can import them to FCPX AutoDuck to perform auto-ducking of the music.

Step 1: Export the Music Files

To perform audio ducking in Final Cut Pro, you can first launch the application on Mac and open your project. Since there is no FCPX audio ducking option, you first have to export the music files.

For this, you can just go to the main menu on Final Cut Pro and select File > Share > Master File. This will help you explore and save all the media files from Final Cut Pro.

Now, once the Master File window would be opened, you can go to the “Role” tab and select “Audio Only” as the output role. This will display a list of the background music and the voiceover file.

You can now select the files of your choice and click on the “Next” button to save them to any desired location on your Mac.

Step 2: Use FCPX AutoDuck to Do Automatic Sound Ducking

Great! Now, you can just open the FCPX AutoDuck application on your Mac via its Application or Spotlight. You can just give it a project name and drag-and-drop the speaker (voiceover) and the music files here. If you want, you can also import a filler file of your choice.

FCPX will also let you select the level of music ducking from its dedication option. There are also different options to set up things like setting up the window or pre-roll for the audio.

In the end, you can click on the “Duck” button and let FCPX AutoDuck perform automatic audio ducking on the files.

Step 3: Insert the Modified File to your Project

Once the FCPX audio ducking process is completed, it will generate an XML file. You can now just drag the XML file and drop it to your project in Final Cut Pro. Here, you can choose to select the XML file in the same project.

You can now copy the modified music clip, go to the timeline, and paste it at the starting of the video. Here, you can just mute the previous music clip and let the auto-duck audio play instead.

Part 2: The Best FCPX Alternative for Mac to Perform Automatic Audio Ducking

As you can see, it is pretty tough to do audio ducking in Final Cut Pro as there is no automatic feature in the tool. Therefore, you can consider using Wondershare Filmora for Mac to perform automatic sound ducking and save your time. It is an inbuilt feature in Filmora that would perform auto-ducking instantly, and you can also mark the level of ducking in the video.

Ideally, you can perform audio ducking on voiceover or another soundtrack in Wondershare Filmora. To perform music ducking via Wondershare Filmora on Mac, you can follow these steps:

Step 1: Import the Video Clip or Record Your Audio

To begin with, just launch Wondershare Filmora on your Mac and just drag-and-drop your media files to the application. You can also go to its menu and choose to import media files.

Once your video is imported, you can drag it to the timeline at the bottom to work on it. If you want, you can click on the voiceover icon (adjacent to the preview section) to record dialogues right away.

Apart from that, you can also import music files to your video or use the extensive range of royalty-free audio files that are available in Filmora.

Step 2: Perform Automatic Audio Ducking

Great! Now, on the timeline of Filmora, you can see your video and the music track. From here, you need to select the track that you want to amplify (like the voiceover).

Afterward, right-click the audio track and select the “Adjust Audio” option from the context menu.

This will open a dedicated Audio Mixer window on the screen. Just go to the Audio tab and enable the “Ducking” option to lower the volume of other audio tracks. You can also select the desired level for music ducking to implement.

Step 3: Export the Edited Video

That’s it! After performing audio ducking on Filmora, you can preview the results and further make the needed changes. In the end, you can click on the “Export” button and save the file in the format and resolution of your choice.

There you go! After following this guide, you can easily learn how to do audio ducking in Final Cut Pro X easily. Since there is no inbuilt FCPX audio ducking option, you can use a third-party tool like FCPX AutoDuck. Apart from that, if you are looking for a better alternative to do sound ducking, then simply use Wondershare Filmora. It is a user-friendly and resourceful application that would let you perform automatic music ducking like a pro.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

If you are working in post-production, then you might be familiar with the concept of audio ducking. In nutshell, it is a process in which the background sound of a clip is reduced and the voiceover is amplified. Therefore, with the help of sound ducking, we can focus on the dialogues without a noisy background track.

Lately, a lot of people have asked us about the process to do automatic audio ducking in Final Cut Pro X. Since it is a clip-based editing tool, it lacks a dedicated mixer to help us do FCPX audio ducking. Thankfully, there are third-party plugins and tools (like the FCPX AutoDuck) that can help us do the same. In this post, I will let you know how to do audio ducking in Final Cut Pro and its best alternative.

If you don’t want to use any plugins, see this article: How to sync in FCPX.

Part 1: How to Perform Audio Ducking in Final Cut Pro X?

If you have a video in which you have background music and a voiceover, then you can perform sound ducking in it. This will automatically enhance the quality of the voiceover and would mellow down the background music selectively. Sadly, the feature of audio ducking in Final Cut Pro has to be done manually as there are no instant automatic options in the tool presently.

Therefore, you can use any reliable third-party FCPX tool like Audified or AutoDuck to meet your requirements. For instance, let’s consider the example of FCPX AutoDuck, which is a paid macOS application. To perform FCPX audio ducking, you first have to export the music and voiceover as two dedicated files. Later, you can import them to FCPX AutoDuck to perform auto-ducking of the music.

Step 1: Export the Music Files

To perform audio ducking in Final Cut Pro, you can first launch the application on Mac and open your project. Since there is no FCPX audio ducking option, you first have to export the music files.

For this, you can just go to the main menu on Final Cut Pro and select File > Share > Master File. This will help you explore and save all the media files from Final Cut Pro.

Now, once the Master File window would be opened, you can go to the “Role” tab and select “Audio Only” as the output role. This will display a list of the background music and the voiceover file.

You can now select the files of your choice and click on the “Next” button to save them to any desired location on your Mac.

Step 2: Use FCPX AutoDuck to Do Automatic Sound Ducking

Great! Now, you can just open the FCPX AutoDuck application on your Mac via its Application or Spotlight. You can just give it a project name and drag-and-drop the speaker (voiceover) and the music files here. If you want, you can also import a filler file of your choice.

FCPX will also let you select the level of music ducking from its dedication option. There are also different options to set up things like setting up the window or pre-roll for the audio.

In the end, you can click on the “Duck” button and let FCPX AutoDuck perform automatic audio ducking on the files.

Step 3: Insert the Modified File to your Project

Once the FCPX audio ducking process is completed, it will generate an XML file. You can now just drag the XML file and drop it to your project in Final Cut Pro. Here, you can choose to select the XML file in the same project.

You can now copy the modified music clip, go to the timeline, and paste it at the starting of the video. Here, you can just mute the previous music clip and let the auto-duck audio play instead.

Part 2: The Best FCPX Alternative for Mac to Perform Automatic Audio Ducking

As you can see, it is pretty tough to do audio ducking in Final Cut Pro as there is no automatic feature in the tool. Therefore, you can consider using Wondershare Filmora for Mac to perform automatic sound ducking and save your time. It is an inbuilt feature in Filmora that would perform auto-ducking instantly, and you can also mark the level of ducking in the video.

Ideally, you can perform audio ducking on voiceover or another soundtrack in Wondershare Filmora. To perform music ducking via Wondershare Filmora on Mac, you can follow these steps:

Step 1: Import the Video Clip or Record Your Audio

To begin with, just launch Wondershare Filmora on your Mac and just drag-and-drop your media files to the application. You can also go to its menu and choose to import media files.

Once your video is imported, you can drag it to the timeline at the bottom to work on it. If you want, you can click on the voiceover icon (adjacent to the preview section) to record dialogues right away.

Apart from that, you can also import music files to your video or use the extensive range of royalty-free audio files that are available in Filmora.

Step 2: Perform Automatic Audio Ducking

Great! Now, on the timeline of Filmora, you can see your video and the music track. From here, you need to select the track that you want to amplify (like the voiceover).

Afterward, right-click the audio track and select the “Adjust Audio” option from the context menu.

This will open a dedicated Audio Mixer window on the screen. Just go to the Audio tab and enable the “Ducking” option to lower the volume of other audio tracks. You can also select the desired level for music ducking to implement.

Step 3: Export the Edited Video

That’s it! After performing audio ducking on Filmora, you can preview the results and further make the needed changes. In the end, you can click on the “Export” button and save the file in the format and resolution of your choice.

There you go! After following this guide, you can easily learn how to do audio ducking in Final Cut Pro X easily. Since there is no inbuilt FCPX audio ducking option, you can use a third-party tool like FCPX AutoDuck. Apart from that, if you are looking for a better alternative to do sound ducking, then simply use Wondershare Filmora. It is a user-friendly and resourceful application that would let you perform automatic music ducking like a pro.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

If you are working in post-production, then you might be familiar with the concept of audio ducking. In nutshell, it is a process in which the background sound of a clip is reduced and the voiceover is amplified. Therefore, with the help of sound ducking, we can focus on the dialogues without a noisy background track.

Lately, a lot of people have asked us about the process to do automatic audio ducking in Final Cut Pro X. Since it is a clip-based editing tool, it lacks a dedicated mixer to help us do FCPX audio ducking. Thankfully, there are third-party plugins and tools (like the FCPX AutoDuck) that can help us do the same. In this post, I will let you know how to do audio ducking in Final Cut Pro and its best alternative.

If you don’t want to use any plugins, see this article: How to sync in FCPX.

Part 1: How to Perform Audio Ducking in Final Cut Pro X?

If you have a video in which you have background music and a voiceover, then you can perform sound ducking in it. This will automatically enhance the quality of the voiceover and would mellow down the background music selectively. Sadly, the feature of audio ducking in Final Cut Pro has to be done manually as there are no instant automatic options in the tool presently.

Therefore, you can use any reliable third-party FCPX tool like Audified or AutoDuck to meet your requirements. For instance, let’s consider the example of FCPX AutoDuck, which is a paid macOS application. To perform FCPX audio ducking, you first have to export the music and voiceover as two dedicated files. Later, you can import them to FCPX AutoDuck to perform auto-ducking of the music.

Step 1: Export the Music Files

To perform audio ducking in Final Cut Pro, you can first launch the application on Mac and open your project. Since there is no FCPX audio ducking option, you first have to export the music files.

For this, you can just go to the main menu on Final Cut Pro and select File > Share > Master File. This will help you explore and save all the media files from Final Cut Pro.

Now, once the Master File window would be opened, you can go to the “Role” tab and select “Audio Only” as the output role. This will display a list of the background music and the voiceover file.

You can now select the files of your choice and click on the “Next” button to save them to any desired location on your Mac.

Step 2: Use FCPX AutoDuck to Do Automatic Sound Ducking

Great! Now, you can just open the FCPX AutoDuck application on your Mac via its Application or Spotlight. You can just give it a project name and drag-and-drop the speaker (voiceover) and the music files here. If you want, you can also import a filler file of your choice.

FCPX will also let you select the level of music ducking from its dedication option. There are also different options to set up things like setting up the window or pre-roll for the audio.

In the end, you can click on the “Duck” button and let FCPX AutoDuck perform automatic audio ducking on the files.

Step 3: Insert the Modified File to your Project

Once the FCPX audio ducking process is completed, it will generate an XML file. You can now just drag the XML file and drop it to your project in Final Cut Pro. Here, you can choose to select the XML file in the same project.

You can now copy the modified music clip, go to the timeline, and paste it at the starting of the video. Here, you can just mute the previous music clip and let the auto-duck audio play instead.

Part 2: The Best FCPX Alternative for Mac to Perform Automatic Audio Ducking

As you can see, it is pretty tough to do audio ducking in Final Cut Pro as there is no automatic feature in the tool. Therefore, you can consider using Wondershare Filmora for Mac to perform automatic sound ducking and save your time. It is an inbuilt feature in Filmora that would perform auto-ducking instantly, and you can also mark the level of ducking in the video.

Ideally, you can perform audio ducking on voiceover or another soundtrack in Wondershare Filmora. To perform music ducking via Wondershare Filmora on Mac, you can follow these steps:

Step 1: Import the Video Clip or Record Your Audio

To begin with, just launch Wondershare Filmora on your Mac and just drag-and-drop your media files to the application. You can also go to its menu and choose to import media files.

Once your video is imported, you can drag it to the timeline at the bottom to work on it. If you want, you can click on the voiceover icon (adjacent to the preview section) to record dialogues right away.

Apart from that, you can also import music files to your video or use the extensive range of royalty-free audio files that are available in Filmora.

Step 2: Perform Automatic Audio Ducking

Great! Now, on the timeline of Filmora, you can see your video and the music track. From here, you need to select the track that you want to amplify (like the voiceover).

Afterward, right-click the audio track and select the “Adjust Audio” option from the context menu.

This will open a dedicated Audio Mixer window on the screen. Just go to the Audio tab and enable the “Ducking” option to lower the volume of other audio tracks. You can also select the desired level for music ducking to implement.

Step 3: Export the Edited Video

That’s it! After performing audio ducking on Filmora, you can preview the results and further make the needed changes. In the end, you can click on the “Export” button and save the file in the format and resolution of your choice.

There you go! After following this guide, you can easily learn how to do audio ducking in Final Cut Pro X easily. Since there is no inbuilt FCPX audio ducking option, you can use a third-party tool like FCPX AutoDuck. Apart from that, if you are looking for a better alternative to do sound ducking, then simply use Wondershare Filmora. It is a user-friendly and resourceful application that would let you perform automatic music ducking like a pro.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

If you are working in post-production, then you might be familiar with the concept of audio ducking. In nutshell, it is a process in which the background sound of a clip is reduced and the voiceover is amplified. Therefore, with the help of sound ducking, we can focus on the dialogues without a noisy background track.

Lately, a lot of people have asked us about the process to do automatic audio ducking in Final Cut Pro X. Since it is a clip-based editing tool, it lacks a dedicated mixer to help us do FCPX audio ducking. Thankfully, there are third-party plugins and tools (like the FCPX AutoDuck) that can help us do the same. In this post, I will let you know how to do audio ducking in Final Cut Pro and its best alternative.

If you don’t want to use any plugins, see this article: How to sync in FCPX.

Part 1: How to Perform Audio Ducking in Final Cut Pro X?

If you have a video in which you have background music and a voiceover, then you can perform sound ducking in it. This will automatically enhance the quality of the voiceover and would mellow down the background music selectively. Sadly, the feature of audio ducking in Final Cut Pro has to be done manually as there are no instant automatic options in the tool presently.

Therefore, you can use any reliable third-party FCPX tool like Audified or AutoDuck to meet your requirements. For instance, let’s consider the example of FCPX AutoDuck, which is a paid macOS application. To perform FCPX audio ducking, you first have to export the music and voiceover as two dedicated files. Later, you can import them to FCPX AutoDuck to perform auto-ducking of the music.

Step 1: Export the Music Files

To perform audio ducking in Final Cut Pro, you can first launch the application on Mac and open your project. Since there is no FCPX audio ducking option, you first have to export the music files.

For this, you can just go to the main menu on Final Cut Pro and select File > Share > Master File. This will help you explore and save all the media files from Final Cut Pro.

Now, once the Master File window would be opened, you can go to the “Role” tab and select “Audio Only” as the output role. This will display a list of the background music and the voiceover file.

You can now select the files of your choice and click on the “Next” button to save them to any desired location on your Mac.

Step 2: Use FCPX AutoDuck to Do Automatic Sound Ducking

Great! Now, you can just open the FCPX AutoDuck application on your Mac via its Application or Spotlight. You can just give it a project name and drag-and-drop the speaker (voiceover) and the music files here. If you want, you can also import a filler file of your choice.

FCPX will also let you select the level of music ducking from its dedication option. There are also different options to set up things like setting up the window or pre-roll for the audio.

In the end, you can click on the “Duck” button and let FCPX AutoDuck perform automatic audio ducking on the files.

Step 3: Insert the Modified File to your Project

Once the FCPX audio ducking process is completed, it will generate an XML file. You can now just drag the XML file and drop it to your project in Final Cut Pro. Here, you can choose to select the XML file in the same project.

You can now copy the modified music clip, go to the timeline, and paste it at the starting of the video. Here, you can just mute the previous music clip and let the auto-duck audio play instead.

Part 2: The Best FCPX Alternative for Mac to Perform Automatic Audio Ducking

As you can see, it is pretty tough to do audio ducking in Final Cut Pro as there is no automatic feature in the tool. Therefore, you can consider using Wondershare Filmora for Mac to perform automatic sound ducking and save your time. It is an inbuilt feature in Filmora that would perform auto-ducking instantly, and you can also mark the level of ducking in the video.

Ideally, you can perform audio ducking on voiceover or another soundtrack in Wondershare Filmora. To perform music ducking via Wondershare Filmora on Mac, you can follow these steps:

Step 1: Import the Video Clip or Record Your Audio

To begin with, just launch Wondershare Filmora on your Mac and just drag-and-drop your media files to the application. You can also go to its menu and choose to import media files.

Once your video is imported, you can drag it to the timeline at the bottom to work on it. If you want, you can click on the voiceover icon (adjacent to the preview section) to record dialogues right away.

Apart from that, you can also import music files to your video or use the extensive range of royalty-free audio files that are available in Filmora.

Step 2: Perform Automatic Audio Ducking

Great! Now, on the timeline of Filmora, you can see your video and the music track. From here, you need to select the track that you want to amplify (like the voiceover).

Afterward, right-click the audio track and select the “Adjust Audio” option from the context menu.

This will open a dedicated Audio Mixer window on the screen. Just go to the Audio tab and enable the “Ducking” option to lower the volume of other audio tracks. You can also select the desired level for music ducking to implement.

Step 3: Export the Edited Video

That’s it! After performing audio ducking on Filmora, you can preview the results and further make the needed changes. In the end, you can click on the “Export” button and save the file in the format and resolution of your choice.

There you go! After following this guide, you can easily learn how to do audio ducking in Final Cut Pro X easily. Since there is no inbuilt FCPX audio ducking option, you can use a third-party tool like FCPX AutoDuck. Apart from that, if you are looking for a better alternative to do sound ducking, then simply use Wondershare Filmora. It is a user-friendly and resourceful application that would let you perform automatic music ducking like a pro.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: