Updated The Ultimate Technique for Uniform Audio Amplitude in VLC A Detailed Walkthrough

The Ultimate Technique for Uniform Audio Amplitude in VLC: A Detailed Walkthrough

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Where Can I Find Angry Dog Bark Effect?

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Today, we will show you to add angry dog sound effects to your videos. For instance, you have a video where you go completely silent, and you don’t want your audience to realize that you went dry of words. At the same time, you cannot cut out the video clip section because maybe it was a DIY tutorial, and every action counts. Well, worry no more because today we will show you step by step addition of dog bark audio and the various ways of downloading dog barking mp3.

Part 1 Ways to Download All Kinds of Sound Effect

Sound design is one of the most underappreciated components of filmmaking by filmmakers. However, this should not prevent you from designing intriguing soundscapes for your project. As a result, we’ve compiled a list of the top ways to get free sound effects.

1. Download from Some YouTube Video

YouTube has a lot of significant sound effects which are with reach. At the same time, it is very tricky to download from the platform. However, the YTD video downloader has made the process easier, which is also free to use. Below is a guide on how you can do it –

Step 1 Download and install the YTD Video downloader

Now using your browser, navigate to the YouTube video with the sound effect you wish to save.

Step 2 If it isn’t already running, start YTD Video Downloader

Then, copy and paste the YouTube URL from your browser into the URL area on YTD.

Step 3 In YTD, click the Download option

When the video download is finished, go to the Convert tab in YTD Video Downloader.

Step 4 Choose the video file to be converted to MP3

From the “Convert video to” option, choose MPEG Audio Layer 3 (MP3).

Step 5 Finally click on the Convert Video button

2. Make Angry Dog Effect by Yourself

This is one quick way to make a sound effect, even though it will not give you the best quality sound. All you need is a smartphone and your dog. Here is the way to go about it –

Step 1 Take your dog to a room where no other sounds are made

Step 2 Then, chain the dog at one corner to minimize its movement

Step 3 Position your phone somewhere; it will pick the dog bark

Then hit record on the phone and move to a corner holding something that the dog will want or likes.

Step 4 Say something (anything you want), and eventually, your dog will bark in anticipation

The dog bark audio will be saved in mp3 format, and you can edit and cut it as you wish.

Step 5 Save the dog barking mp3 ready to be added to your video

3. Mix kit Glitch Sound Effects Package

As you strive to achieve a rough and edgy dog bark voice for your project. Glitch sound effects can help you achieve precisely that. This free sound effect set will help your videos compete with the world’s best filmmakers.

Step 1 Search mix kit glitch sound effects on Google

Step 2 Click DOWNLOAD FREE GLITCH SOUND EFFECTS from the search results

Step 3 Scroll to the bottom of the page and select animals sound effects

Step 4 Find dog barking sound effects by scrolling or searching and downloading

4. Story Blocks Sound Effects

This royalty-free sound bundle may add depth and tone to your setting with the evocative sounds of animal noises. The website includes a wide range of dog barks, from modest suburban dog barks to nightguard German shepherds angry dog barks to deter burglars. Here’s a step-by-step guide to getting exactly what you’re searching for.

Step 1 Go to the story blocks website

Step 2 Use keyword dog barks to search

Step 3 Browse the dog bark voice that suits your needs by playing a preview

Step 4 Download and save, ready to be added to your video

5. Zapsplat Free Sound Effects

Step 1 Visit the website zapsplat.com. This is the perfect spot if you want to get free sound effects. All of their sounds are available for download as mp3. Here’s how:

There, you’ll discover all sounds organized into functional categories, allowing you to search fast and conveniently. Step 2 Click free sound effects and then categories

Step 3 Select the dog category

Step 4 Download your preferred dog bark sound effect, and you are good to go

6. Use Tunepocket.com

Tunepocket is the website that provides a limitless count of sound effects to get downloaded. You can easily find the angry dog bark voice effect with many options from the website.

Step by Step Process to Get Sound Effects:

Step 1 Visit the website tunepocket.com from your home browser. Jump on the sound effects tab

Step 2 Go to search bar and type angry dog bark voice effect

A number of results will appear. Select the one which fits by playing random sounds.

Step 3 Download, edit, and it is ready to use

Part 2 Use Filmora to Add Sound Effects in Your Video

Wondershare Filmora is an amazing video-making and editing software. Filmora offers video editing for consumers ranging from beginner to intermediate users. Its standard functions include video editing, audio cut, and adding audio to video tools, which are explored and managed by a drag-and-drop interface. Filmmakers, game developers, podcasters, TV, radio, performing arts, and schools use their technologies extensively. Filmora is available in four different versions:

Filmora entry-level desktop video editor.
Filmora mobile version, which is Android and iOS compatible.
FilmoraScrn is a screen recording app for Windows with built-in video editing capabilities.

Each version is tailored to the needs of the individual users.

Features

Audio Equalizer: Enables you to lower or raise the loudness of an audio frequency.
Audio Controls: Control audio levels of the music track to adjust with the clip.
Audio Separation: Split the audio from the video to make them separate.
Noise Removal: Remove background noise from the audio.
Audio Mixer: Readjusting the volume, speed, and pitch of dBm. Also, panning of each track.

Step by Step Guide for Adding Sound Effects to Video with Filmora:

Filmora can assist you in adding sound effects to your video. And since we already showed you different ways of downloading sound effects audio, now we will show you a step-by-step guide on how to add them to your video using Filmora –

Step 1 Import Already Downloaded Dog Barking mp3 File

Launch and bring the audio file to the Filmora app by clicking MEDIA and the IMPORT button below the menu bar. Download the app from the official site if you have not). From the drop-down menu, select ‘Import Media Files’ to select the video clip, and then repeat the process to choose the dog bark audio file.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step 2 Edit the Audio File

You can modify the music by double-tapping the audio on the timeline. It will display the audio panel at the top of the screen. You may arrange the audio to fade in or out, adjust the pitch, speed, and volume, and select the suitable equalization.

Step 3 Merge the Audio File with Video

Drag and drop the audio over the video you are editing on the timeline to merge them.

Step 4 Exporting the Edited Video

After you’ve made the necessary adjustments to your movie and added the dog bark audio, click the ‘EXPORT’ option on the toolbar to export it. The produced file may be saved in.MP4 and.WMV formats, also rename and set your desired resolution.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

I hope, you have found a lot of options to find the angry dog bark audio effect. We explained all the sources and methods step by step, you don’t need to jump to any other website. Use any of the above options to find and download the angry dog bark effect for free. Choose the source and track it according to your requirement. The audio track of a video clip or movie may be edited with the Filmora video editor. Disable audio for a video, enhance audio quality, switch audio codecs, and whatever function you pick produces excellent results.

Its versatility with practically all devices, whether smartphone or computer, makes it even more appealing and one of the most powerful tools for video editing. And, unlike many video editors, Filmora includes a free entry-level Windows program that does everything you need.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free Try It Free