The Ultimate Guide to Equalizing Auditory Output in VLC Software

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

“AudioMastery: The Definitive Guide to Choosing the Best Voice Recorders”

Top 10 Audio Recording Software to Capture Your Voice Easily

Shanoon Cox

Mar 27, 2024• Proven solutions

Whether professional or for amateur purposes, the audio recording software programs are very important. These programs allow manipulating the audio so that it matches the need for a specific project.

The best audio recording software has a variety of tools embedded to polish the audio recorded, in which this article we are going to review the best of them for you.

What is Audio Recording Software?

As the name suggests, the audio recording software is used to record audio using a unique technology. This allows the users to capture their own or the voice they want and transfer it wherever they want. The software also adds effects to the voice and makes it professional to use wherever the user wants to.

What Does a Sound Recorder Use for?

There are several uses of audio recording software program. Some are listed as under:

In the music field, this software is of great use. It can be used for multitrack recording. The mixing of the sound is then done using the same or different tools.
The audio recorded can be edited with ease. This includes enhancing and adding effects to it with perfection.
With microphone use, the recording software can be integrated to make sure that the voice of the user is also recorded if required.
Some audio recording software programs also come with screen recording, and therefore, these foster multitasking.

List of Top 10 Audio Recording Software Programs

The audio recording software for PC that would make your life easy is mentioned as under.

1.Wondershare DemoCreator

This is by far the best and the most used software program when it comes to audio recording. It is highly reliable and comes with a GUI. The user interface is easy to understand, and so are the functionalities.

With the best and the most advanced controls recording audio has never been this easy. It also acts as Mac audio recording software, and therefore it is highly recommended for all platforms. The frequent updates make this program even easier to use.

Features

The interface of the program is very easy to use and stress-free.
The high definition audio can be recorded with ease.
The program supports 50+ formats to import audio, video, and other files to the system.
There are highly advanced options for professional audio recording.
The program can record endless video and audio as far as there is space on your disk.

Pros

It is one of the programs that support professional audio editing.
The program is very easy to use as it has a graphical interface.

Cons

The program is flash software-based, which can slow down the system.
It does not offer highly advanced audio editing at all.

Supported Platforms

The program can be used with both Windows and Mac.

Go ahead to download and have a try now!

Free Download Free Download

2.WavePad

It is one of the best and most used programs to make sure that the audio is recorded with perfection. This program is compatible with most of the audio formats, and therefore it is highly recommended. The overall rating of the program is high as it is used by professionals and, therefore, highly rated as well.

Features

It has several audio enhancing capabilities, which include amplification and effect addition.
The audio can be edited, trimmed, and cropped with this program.
The professional-quality sound recording is used by this program to enhance the capabilities.

Pros

The best part of this program is its quality of end product that is very high.
It is a wave editor that gives the users more control over the end product.

Cons

The mp3 editor of this program does not offer top quality work.
The program cannot work with multiple files efficiently.

Supported Platforms

It can be installed over Mac, Windows, Android, and iOS.

3.Ocenaudio

As a cross-platform program, this one has a lot to offer. The interface is a bit technical, but overall the use of the program is easy once the hands-on is done. The program is also highly intuitive and allows the users to overcome the day to day audio recording and editing tasks.

Features

The Ocen Framework is also integrated with this platform to enhance its capabilities.
The program also records screen if required by the users.
It is one of the programs that have been rated on other high-end platforms.

Pros

The program uses auto trim and voice recording controls.
The sound spectral analysis of the program is highly advanced.

Cons

The program cannot directly load the file from a CD.
The program cannot be opened in multiple screens, so the work rate is slow.

Supported Platforms

It is compatible with Mac, Windows, and Linux.

4.Adobe Audition

It can be rightfully regarded as one of the best and the most advanced programs. Backed by years of Adobe experience, it is a program that will get the user a step forward. It is highly recommended to all those users that are looking for a professional level of audio recording.

Features

It includes multitrack, wave editing, and audio restoration tools to give the best results.
The essential sound panel has been integrated with the program to get the best oomph effect to the audio.
The music clips can be integrated within the audio recording to make it sound professional.

Pros

The platform can be used to create awesome podcasts.
The audio break can be repaired with perfection.

Cons

It is expensive, so all the users cannot afford it at all.
The interface is high tech in nature and requires time to learn.

Supported Platforms

It is supported by Windows and Mac.

5.Audacity

It is free software that is used to record audio professionally. This high-performance program makes sure that the audio which is recorded is also shared with different platforms. The built-in panel is upgraded, and therefore it is highly advance.

Features

It is ad-free and therefore provides hassle-free work.
The audio editing and recording have never been as easy as it is with audacity.
Multitrack editing is also possible with this program.

Pros

The VST plugin support is provided by the program.
It is a portable program that can be used for pitch correction.

Cons

The noise reduction tool of this program needs an upgrade.
The record to tape feature is currently unavailable.

Supported Platforms

It is supported by Mac, Linux, Windows, and BSD.

6.Wavosaur

It is one of the free programs that can be regarded as better than many paid ones. It is all because the qualities of the program are matchless. The processing of files is done with WAV and Mp3 files filter, which makes the process very much easier.

Features

The program has multiple document interfaces for multiple file handling.
The editing features such as cut, copy, paste, and edit can be performed in a single window.
The waveform representation of the program is accurate and highly advanced.

Pros

The program offers bit depth convert, pitch shift, and DC offset removal.
The VST effects can be added to the entire batch of sound files.

Cons

The audio routing and the multichannel support of the program are not efficient.
The software sampler extraction is a bit slow when it comes to this program.

Supported Platforms

The program can only be installed on Windows.

7.MixPad

The audio processing and mixing have been made very easy with this platform. The program has an interface that is sleek in design and allows the processing of the audio info with care. The program also supports cloud storage, which means that the entire user’s hard work remains safe and secures all the time.

Features

The program can mix the unlimited number of tracks all at the same time.
Depending upon the requirement, the multiple or a single track can be processed at the same time.
The program supports almost every sound format, so any type of sound can be imported with perfection.

Pros

The audio effects such as EQ, compression, and reverb can be added with perfection.
The latency rate is very low, and the program also offers ASIO support for accurate processing.

Cons

The program only offers the export of the sound that is up to 32 bits.
The sample rates of up to 96 kHz are only supported, which is less than most of the other mixers.

Supported Platforms

The program can be installed on Mac, Windows, Android, iPad, and Kindle Fire.

8.Sound Forge

If a user wants to completely control the audio editing process, then this software is for them. It is highly advanced and makes sure that the work that is done is highly précised. From Red Book CD creation to sound design and mixing, this program provides the users with complete control and authority over the process.

Features

The multichannel WAV recording and processing is now possible with the new version of the program.
The VST plugin support is provided by this program with perfection.
The VST effects can be chained in a virtual rack.

Pros

The simple digitization and restoration of the audio have been made simple by this program.
The one-click solutions allow the users to process the audio tracks easily.

Cons

The program only offers 32 bits of power, which is very low.
The multiple VST GUI is not supported by this program.

Supported Platforms

The Sound Forge can be installed on Mac and Windows.

9.Spek

The best part of the software is that it is free and allows the users to overcome the problems which the other audio recorders present. The interface is easy to learn, and therefore the overall usage is easy. The lossless quality is something for which the software is known for. It also supports the FFMPEG library.

Features

The signal processing is ultra-fast as it uses several threads to process audio.
The drag and drop support of the program is highly efficient, and the program supports common audio formats.
The program can be accessed in 19 different languages.

Pros

The spectral density rulers allow the auto fitting of time.
The spectral density range of the program is also adjustable.

Cons

The codec names are, and the audio signal parameters cannot be seen.
The program is licensed under GPLv3, which is now obsolete.

Supported Platforms

The program is compatible with Windows, Linux, and Mac.

10.Audio Highjack

The program, as the name suggests, makes it possible for the users to completely delve deep into the process of audio editing. The interface, as well as the controls, is very easy to understand and use. For novice users, this program is highly recommended as it makes audio editing a fun-filled activity.

Features

It provides detailed statistics and min, the max value per channel.
The processed audio can be listened in real-time to get an idea about the end product.
The waveform generator and frequency impulse train are embedded within the program.

Pros

The lame encoder support has been embedded within the recorder to export mp3 files.
The editor’s look is skin able, which can be changed as per the user choice.

Cons

The processing options are less as compared to the other recorders.
The audio files cannot be exported as text, so the program cannot be used with PSpice.

Supported Platforms

The program is only available for Mac.

A Roundup of the Best Audio Recording Software Programs

No.	Tools	Rating	Supported Formats	Price	Processing Power
1	DemoCreator	4.5	.mp3, .m4a, .wav, .wma, .ogg, .flac, .aif, .aiff	$29.99	64-bit
2	WavePad	4.4	vox, gsm, WMA, real audio, au, aif, FLAC, and Ogg	$69.95	64-bit
3	Ocenaudio	4.0	vox, gsm, WMA, wav, .wma, .ogg, and .flac	Free	32-bit
4	Adobe Audition	4.5	AIF, AIFF, AIFC	$74.99	64-bit
5	Audacity	3.9	mp3, wav, AIFF, au, and ogg	Free	32-bit
6	Wavosaur	3.5	VST plugins, ASIO driver, multichannel wav files, real-time effect processing.	Free	32-bit
7	MixPad	3.2	wav, mp3, vox, and gsm	$129	32-bit
8	Sound Forge	4.0	SWF, RealMedia 9, WMA, AVI , AIFF, AIF, and SND	Free	32-bit
9	Spek	4.4	vox, gsm, WMA, Wav, WMA, real audio, au, aif, FLAC, and Ogg	Free	64-bit
10	Audio Highjack	4.2	.mp3, .m4a, .wav, .wma, aif, FLAC, and Ogg	Free	64-bit

Conclusion

With the overall specs and ratings by the users, the Wondershare DemoCreator is the best software that should be used for audio recording.

The program is highly compatible with major operating systems, and therefore it is highly recommended. The overall mechanism is easy, and the program also supports multiple formats.

It is highly technical and is constantly upgraded to make sure that it remains in line with modern technologies. It is a one-stop-shop for all the audio recording needs of the users and therefore highly viable.

With this program, the audio that has been worked on can be shared on most popular social media platforms like YouTube and Facebook.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox