Pitch Control Made Easy: A Comprehensive Guide to Altering Voices with Audacity

What does free open source audio software mean? Audacity voice changer is the answer. Along with being free, it is a cross-platform software, which means that it can be used with different software packages. Audacity is easy to use multi-track audio editing and recording software.

It has a simple and clean-looking interface for better user understandability. Audacity has plug-in support for multiple audio formats like LV2, AU, and VST. We will further discuss Audacity as an audio voice changer, and how to use the software under various conditions will also be discussed in the article.

In this article

01 How Can You Use Voice Changer in Audacity?

02 How to Change Pitch in Audacity?

03 How to Change Male Voice to Female Voice with Audacity?

04 How to Create Robot Voice in Audacity?

Part 1. How Can You Use Voice Changer in Audacity?

Voice changers are also commonly referred to as voice enhancers, which can completely change and transform your voice. You can pull pranks on friends with voice changers if you are bored. If you want to hide your identity, you can modify your voice and do that. With voice changers, you can change the tone and the pitch of your voice and add various voice effects.

Voice changer comes with a wide range of sound effects ranging from baby sound, kid, male, female, monster, demon, animal sounds, and a lot more than this. Some great voice changers include AV Voice Changer , MorphVOX Voice Changer , Voicemod , Clownfish Voice Changer , and others. Do you know that these voice changers can be used with Audacity? Let’s tell you how.

Step 1: If you are interested in using a voice changer in Audacity, start by downloading your favorite voice changer to your PC. Once done, install it and after successful installation, launch it.

Step 2: As we have mentioned earlier that you are offered various voice effects in voice changers, so after launching it, select your preferred voice effect, whether it be a baby voice, animal voice, or celebrity voice.

Step 3: On the other side, launch Audacity on your PC. Once it opens, you will see the top menu; just below that, a microphone icon will be seen. Tap on that icon so that the drop-down menu appears, there select the name of your voice changer.

Part 2. How to Change Pitch in Audacity?

Audacity, the audio voice changer, offers a ‘Change Pitch’ feature with which you can change the pitch of the audio without damaging its tempo. You can separately change the speed. With this feature, you can also adjust and play with the frequency and semitones.

The audio editor also features to estimate the starting pitch; for instance, if A3 is a quiet note, followed by a large and loud note like C4, Audacity will detect C4. In case both notes have the same volume, Audacity will detect A3. With Audacity, you also get the ‘To’ and ‘From’ controls if you plan to change the pitch manually. To learn more about changing pitch, follow the steps below:

Step 1: For changing pitch in Audacity, start by launching the software. After launching, you can either record the audio or else, from the ‘File’ section, you can also ‘Open’ any file from your device.

Step 2: Audacity lets you change the pitch of a whole file or else for a small portion as well. Now, to change the pitch of a small portion, click and drag the mouse along the recording. Or else, click on the name of the track to select it completely.

Step 3: After this, head over to the top menu and click on the ‘Effect’ section. A drop-down menu list will appear, locate and select the ‘Change Pitch’ option. You can either use the sliders to adjust the pitch or else write the percentage to change.

Step 4: You can preview the file and check how it sounds once done. When you are satisfied, hit the ‘OK’ button to save the changes. You can also adjust the Speed and Tempo of the track.

Part 3. How to Change Male Voice to Female Voice with Audacity?

The most fun voice transformation is from low pitch to higher pitch. In general, modifying the male voice to a female voice, as the male pitch has a negative value and changing it to a positive pitch, modifies your voice to a female voice. What else could be better to use than the amazing Audacity voice changer? Let’s share the steps that will help you change your male voice to female.

Step 1: First, start by opening the Audacity audio editor. Once it has launched successfully, you should import the audio file. You can record audio with Audacity. Along with this, you can also import files from your device from the ‘File’ section, followed by the ‘Open’ option.

Step 2: After your audio track is visible on the timeline, you have to select the part of the file that you want to edit. You can easily select it by clicking and dragging the mouse. If not this, you can also work with the whole track; for this, simply click on the track name to select it.

Step 3: After you are satisfied with the selection, head to the top menu and select the ‘Effects’ options. A drop-down list appears after this, and you have to look for the ‘Change Pitch’ option and select it.

Step 4: Normally, you can adjust the pitch by taking help from the sliders, but you can also change the pitch manually by adding a percentage. The male pitch originally will have a negative value; change it and set a positive value. You can keep changing until you are satisfied.

Step 5: Lastly, don’t forget to save the changes by hitting the ‘OK’ button at the button and saving the file to your respective device.

Part 4. How to Create Robot Voice in Audacity?

As we have mentioned, Audacity is an audio voice changer, so you must know that Audacity also can change your voice into a robotic voice. Among the different voices, the robot voice sounds interesting, and it’s fun to create. If you are excited to learn to create robot voice in Audacity, follow the guiding steps shared below:

Step 1: For creating an extraordinary robotic voice, start by launching Audacity on your device. After it opens, it’s time to record your voice to create a robot voice. Or else, head to the ‘File’ tab and import your audio file from your device to Audacity from the ‘Open’ option.

Step 2: After this, to start the editing, you need a stereo track on the timeline. For doing this, navigate ‘Tracks’ from the top menu and click on it. Next, hover on the ‘Add New’ option to open its sub-menu. You will see the ‘Stereo Track’ option, select it, and copy-paste the audio file in the new section.

Step 3: Let’s start with the fun part, the editing and adjusting different features. Start by opening the ‘Effects’ tab, and from the long list of options, select ‘Echo.’ There, you can enter the ‘Delay Time’ and change other fields as well.

Step 4: Preview the audio and move on to the next setting. Open the ‘Effects’ section and look for the ‘Change Pitch’ option. You can change and adjust the pitch according to your desire and preview the file again.

Step 5: For creating a robot voice, you can also set the tempo. For that, head to the ‘Change Tempo’ option under the ‘Effects’ section and set the value to minus. Keep adjusting the different effects until you get your perfect robot voice.

Bottom Line

Audacity is not only a great audio editor; it is also a stunning audio voice changer. The software comes with a lot of effects that can completely transform your voice to an unrecognizable level. You can sound like a robot, male, female, and whatever you want with Audacity voice changer. Do you know any video editor that offers sound effects?

If you don’t know, let us introduce Wondershare Filmora Video Editor . This wonderous software is loaded with many editing features to create the best videos. Not only trim, cut, crop, but the software also offers you features like split-screen, chroma key background, keyframing, color match, motion tracking, and whatnot.

Apart from this, this video editor is a hub for cool sound effects and editing elements from its media library, Filmstock. You get a wide range of sound effects, titles, transitions, and many more elements.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Change Pitch in Audacity?

03 How to Change Male Voice to Female Voice with Audacity?

04 How to Create Robot Voice in Audacity?

Part 1. How Can You Use Voice Changer in Audacity?

Voice changers are also commonly referred to as voice enhancers, which can completely change and transform your voice. You can pull pranks on friends with voice changers if you are bored. If you want to hide your identity, you can modify your voice and do that. With voice changers, you can change the tone and the pitch of your voice and add various voice effects.

Voice changer comes with a wide range of sound effects ranging from baby sound, kid, male, female, monster, demon, animal sounds, and a lot more than this. Some great voice changers include AV Voice Changer , MorphVOX Voice Changer , Voicemod , Clownfish Voice Changer , and others. Do you know that these voice changers can be used with Audacity? Let’s tell you how.

Step 1: If you are interested in using a voice changer in Audacity, start by downloading your favorite voice changer to your PC. Once done, install it and after successful installation, launch it.

Step 2: As we have mentioned earlier that you are offered various voice effects in voice changers, so after launching it, select your preferred voice effect, whether it be a baby voice, animal voice, or celebrity voice.

Step 3: On the other side, launch Audacity on your PC. Once it opens, you will see the top menu; just below that, a microphone icon will be seen. Tap on that icon so that the drop-down menu appears, there select the name of your voice changer.

Part 2. How to Change Pitch in Audacity?

Audacity, the audio voice changer, offers a ‘Change Pitch’ feature with which you can change the pitch of the audio without damaging its tempo. You can separately change the speed. With this feature, you can also adjust and play with the frequency and semitones.

The audio editor also features to estimate the starting pitch; for instance, if A3 is a quiet note, followed by a large and loud note like C4, Audacity will detect C4. In case both notes have the same volume, Audacity will detect A3. With Audacity, you also get the ‘To’ and ‘From’ controls if you plan to change the pitch manually. To learn more about changing pitch, follow the steps below:

Step 1: For changing pitch in Audacity, start by launching the software. After launching, you can either record the audio or else, from the ‘File’ section, you can also ‘Open’ any file from your device.

Step 2: Audacity lets you change the pitch of a whole file or else for a small portion as well. Now, to change the pitch of a small portion, click and drag the mouse along the recording. Or else, click on the name of the track to select it completely.

Step 3: After this, head over to the top menu and click on the ‘Effect’ section. A drop-down menu list will appear, locate and select the ‘Change Pitch’ option. You can either use the sliders to adjust the pitch or else write the percentage to change.

Step 4: You can preview the file and check how it sounds once done. When you are satisfied, hit the ‘OK’ button to save the changes. You can also adjust the Speed and Tempo of the track.

Part 3. How to Change Male Voice to Female Voice with Audacity?

The most fun voice transformation is from low pitch to higher pitch. In general, modifying the male voice to a female voice, as the male pitch has a negative value and changing it to a positive pitch, modifies your voice to a female voice. What else could be better to use than the amazing Audacity voice changer? Let’s share the steps that will help you change your male voice to female.

Step 1: First, start by opening the Audacity audio editor. Once it has launched successfully, you should import the audio file. You can record audio with Audacity. Along with this, you can also import files from your device from the ‘File’ section, followed by the ‘Open’ option.

Step 2: After your audio track is visible on the timeline, you have to select the part of the file that you want to edit. You can easily select it by clicking and dragging the mouse. If not this, you can also work with the whole track; for this, simply click on the track name to select it.

Step 3: After you are satisfied with the selection, head to the top menu and select the ‘Effects’ options. A drop-down list appears after this, and you have to look for the ‘Change Pitch’ option and select it.

Step 4: Normally, you can adjust the pitch by taking help from the sliders, but you can also change the pitch manually by adding a percentage. The male pitch originally will have a negative value; change it and set a positive value. You can keep changing until you are satisfied.

Step 5: Lastly, don’t forget to save the changes by hitting the ‘OK’ button at the button and saving the file to your respective device.

Part 4. How to Create Robot Voice in Audacity?

As we have mentioned, Audacity is an audio voice changer, so you must know that Audacity also can change your voice into a robotic voice. Among the different voices, the robot voice sounds interesting, and it’s fun to create. If you are excited to learn to create robot voice in Audacity, follow the guiding steps shared below:

Step 1: For creating an extraordinary robotic voice, start by launching Audacity on your device. After it opens, it’s time to record your voice to create a robot voice. Or else, head to the ‘File’ tab and import your audio file from your device to Audacity from the ‘Open’ option.

Step 2: After this, to start the editing, you need a stereo track on the timeline. For doing this, navigate ‘Tracks’ from the top menu and click on it. Next, hover on the ‘Add New’ option to open its sub-menu. You will see the ‘Stereo Track’ option, select it, and copy-paste the audio file in the new section.

Step 3: Let’s start with the fun part, the editing and adjusting different features. Start by opening the ‘Effects’ tab, and from the long list of options, select ‘Echo.’ There, you can enter the ‘Delay Time’ and change other fields as well.

Step 4: Preview the audio and move on to the next setting. Open the ‘Effects’ section and look for the ‘Change Pitch’ option. You can change and adjust the pitch according to your desire and preview the file again.

Step 5: For creating a robot voice, you can also set the tempo. For that, head to the ‘Change Tempo’ option under the ‘Effects’ section and set the value to minus. Keep adjusting the different effects until you get your perfect robot voice.

Bottom Line

Audacity is not only a great audio editor; it is also a stunning audio voice changer. The software comes with a lot of effects that can completely transform your voice to an unrecognizable level. You can sound like a robot, male, female, and whatever you want with Audacity voice changer. Do you know any video editor that offers sound effects?

If you don’t know, let us introduce Wondershare Filmora Video Editor . This wonderous software is loaded with many editing features to create the best videos. Not only trim, cut, crop, but the software also offers you features like split-screen, chroma key background, keyframing, color match, motion tracking, and whatnot.

Apart from this, this video editor is a hub for cool sound effects and editing elements from its media library, Filmstock. You get a wide range of sound effects, titles, transitions, and many more elements.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Change Pitch in Audacity?

03 How to Change Male Voice to Female Voice with Audacity?

04 How to Create Robot Voice in Audacity?

Part 1. How Can You Use Voice Changer in Audacity?

Voice changers are also commonly referred to as voice enhancers, which can completely change and transform your voice. You can pull pranks on friends with voice changers if you are bored. If you want to hide your identity, you can modify your voice and do that. With voice changers, you can change the tone and the pitch of your voice and add various voice effects.

Voice changer comes with a wide range of sound effects ranging from baby sound, kid, male, female, monster, demon, animal sounds, and a lot more than this. Some great voice changers include AV Voice Changer , MorphVOX Voice Changer , Voicemod , Clownfish Voice Changer , and others. Do you know that these voice changers can be used with Audacity? Let’s tell you how.

Step 1: If you are interested in using a voice changer in Audacity, start by downloading your favorite voice changer to your PC. Once done, install it and after successful installation, launch it.

Step 2: As we have mentioned earlier that you are offered various voice effects in voice changers, so after launching it, select your preferred voice effect, whether it be a baby voice, animal voice, or celebrity voice.

Step 3: On the other side, launch Audacity on your PC. Once it opens, you will see the top menu; just below that, a microphone icon will be seen. Tap on that icon so that the drop-down menu appears, there select the name of your voice changer.

Part 2. How to Change Pitch in Audacity?

Audacity, the audio voice changer, offers a ‘Change Pitch’ feature with which you can change the pitch of the audio without damaging its tempo. You can separately change the speed. With this feature, you can also adjust and play with the frequency and semitones.

The audio editor also features to estimate the starting pitch; for instance, if A3 is a quiet note, followed by a large and loud note like C4, Audacity will detect C4. In case both notes have the same volume, Audacity will detect A3. With Audacity, you also get the ‘To’ and ‘From’ controls if you plan to change the pitch manually. To learn more about changing pitch, follow the steps below:

Step 1: For changing pitch in Audacity, start by launching the software. After launching, you can either record the audio or else, from the ‘File’ section, you can also ‘Open’ any file from your device.

Step 2: Audacity lets you change the pitch of a whole file or else for a small portion as well. Now, to change the pitch of a small portion, click and drag the mouse along the recording. Or else, click on the name of the track to select it completely.

Step 3: After this, head over to the top menu and click on the ‘Effect’ section. A drop-down menu list will appear, locate and select the ‘Change Pitch’ option. You can either use the sliders to adjust the pitch or else write the percentage to change.

Step 4: You can preview the file and check how it sounds once done. When you are satisfied, hit the ‘OK’ button to save the changes. You can also adjust the Speed and Tempo of the track.

Part 3. How to Change Male Voice to Female Voice with Audacity?

The most fun voice transformation is from low pitch to higher pitch. In general, modifying the male voice to a female voice, as the male pitch has a negative value and changing it to a positive pitch, modifies your voice to a female voice. What else could be better to use than the amazing Audacity voice changer? Let’s share the steps that will help you change your male voice to female.

Step 1: First, start by opening the Audacity audio editor. Once it has launched successfully, you should import the audio file. You can record audio with Audacity. Along with this, you can also import files from your device from the ‘File’ section, followed by the ‘Open’ option.

Step 2: After your audio track is visible on the timeline, you have to select the part of the file that you want to edit. You can easily select it by clicking and dragging the mouse. If not this, you can also work with the whole track; for this, simply click on the track name to select it.

Step 3: After you are satisfied with the selection, head to the top menu and select the ‘Effects’ options. A drop-down list appears after this, and you have to look for the ‘Change Pitch’ option and select it.

Step 4: Normally, you can adjust the pitch by taking help from the sliders, but you can also change the pitch manually by adding a percentage. The male pitch originally will have a negative value; change it and set a positive value. You can keep changing until you are satisfied.

Step 5: Lastly, don’t forget to save the changes by hitting the ‘OK’ button at the button and saving the file to your respective device.

Part 4. How to Create Robot Voice in Audacity?

As we have mentioned, Audacity is an audio voice changer, so you must know that Audacity also can change your voice into a robotic voice. Among the different voices, the robot voice sounds interesting, and it’s fun to create. If you are excited to learn to create robot voice in Audacity, follow the guiding steps shared below:

Step 1: For creating an extraordinary robotic voice, start by launching Audacity on your device. After it opens, it’s time to record your voice to create a robot voice. Or else, head to the ‘File’ tab and import your audio file from your device to Audacity from the ‘Open’ option.

Step 2: After this, to start the editing, you need a stereo track on the timeline. For doing this, navigate ‘Tracks’ from the top menu and click on it. Next, hover on the ‘Add New’ option to open its sub-menu. You will see the ‘Stereo Track’ option, select it, and copy-paste the audio file in the new section.

Step 3: Let’s start with the fun part, the editing and adjusting different features. Start by opening the ‘Effects’ tab, and from the long list of options, select ‘Echo.’ There, you can enter the ‘Delay Time’ and change other fields as well.

Step 4: Preview the audio and move on to the next setting. Open the ‘Effects’ section and look for the ‘Change Pitch’ option. You can change and adjust the pitch according to your desire and preview the file again.

Step 5: For creating a robot voice, you can also set the tempo. For that, head to the ‘Change Tempo’ option under the ‘Effects’ section and set the value to minus. Keep adjusting the different effects until you get your perfect robot voice.

Bottom Line

Audacity is not only a great audio editor; it is also a stunning audio voice changer. The software comes with a lot of effects that can completely transform your voice to an unrecognizable level. You can sound like a robot, male, female, and whatever you want with Audacity voice changer. Do you know any video editor that offers sound effects?

If you don’t know, let us introduce Wondershare Filmora Video Editor . This wonderous software is loaded with many editing features to create the best videos. Not only trim, cut, crop, but the software also offers you features like split-screen, chroma key background, keyframing, color match, motion tracking, and whatnot.

Apart from this, this video editor is a hub for cool sound effects and editing elements from its media library, Filmstock. You get a wide range of sound effects, titles, transitions, and many more elements.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Change Pitch in Audacity?

03 How to Change Male Voice to Female Voice with Audacity?

04 How to Create Robot Voice in Audacity?

Part 1. How Can You Use Voice Changer in Audacity?

Voice changers are also commonly referred to as voice enhancers, which can completely change and transform your voice. You can pull pranks on friends with voice changers if you are bored. If you want to hide your identity, you can modify your voice and do that. With voice changers, you can change the tone and the pitch of your voice and add various voice effects.

Voice changer comes with a wide range of sound effects ranging from baby sound, kid, male, female, monster, demon, animal sounds, and a lot more than this. Some great voice changers include AV Voice Changer , MorphVOX Voice Changer , Voicemod , Clownfish Voice Changer , and others. Do you know that these voice changers can be used with Audacity? Let’s tell you how.

Step 1: If you are interested in using a voice changer in Audacity, start by downloading your favorite voice changer to your PC. Once done, install it and after successful installation, launch it.

Step 2: As we have mentioned earlier that you are offered various voice effects in voice changers, so after launching it, select your preferred voice effect, whether it be a baby voice, animal voice, or celebrity voice.

Step 3: On the other side, launch Audacity on your PC. Once it opens, you will see the top menu; just below that, a microphone icon will be seen. Tap on that icon so that the drop-down menu appears, there select the name of your voice changer.

Part 2. How to Change Pitch in Audacity?

Audacity, the audio voice changer, offers a ‘Change Pitch’ feature with which you can change the pitch of the audio without damaging its tempo. You can separately change the speed. With this feature, you can also adjust and play with the frequency and semitones.

The audio editor also features to estimate the starting pitch; for instance, if A3 is a quiet note, followed by a large and loud note like C4, Audacity will detect C4. In case both notes have the same volume, Audacity will detect A3. With Audacity, you also get the ‘To’ and ‘From’ controls if you plan to change the pitch manually. To learn more about changing pitch, follow the steps below:

Step 1: For changing pitch in Audacity, start by launching the software. After launching, you can either record the audio or else, from the ‘File’ section, you can also ‘Open’ any file from your device.

Step 2: Audacity lets you change the pitch of a whole file or else for a small portion as well. Now, to change the pitch of a small portion, click and drag the mouse along the recording. Or else, click on the name of the track to select it completely.

Step 3: After this, head over to the top menu and click on the ‘Effect’ section. A drop-down menu list will appear, locate and select the ‘Change Pitch’ option. You can either use the sliders to adjust the pitch or else write the percentage to change.

Step 4: You can preview the file and check how it sounds once done. When you are satisfied, hit the ‘OK’ button to save the changes. You can also adjust the Speed and Tempo of the track.

Part 3. How to Change Male Voice to Female Voice with Audacity?

The most fun voice transformation is from low pitch to higher pitch. In general, modifying the male voice to a female voice, as the male pitch has a negative value and changing it to a positive pitch, modifies your voice to a female voice. What else could be better to use than the amazing Audacity voice changer? Let’s share the steps that will help you change your male voice to female.

Step 1: First, start by opening the Audacity audio editor. Once it has launched successfully, you should import the audio file. You can record audio with Audacity. Along with this, you can also import files from your device from the ‘File’ section, followed by the ‘Open’ option.

Step 2: After your audio track is visible on the timeline, you have to select the part of the file that you want to edit. You can easily select it by clicking and dragging the mouse. If not this, you can also work with the whole track; for this, simply click on the track name to select it.

Step 3: After you are satisfied with the selection, head to the top menu and select the ‘Effects’ options. A drop-down list appears after this, and you have to look for the ‘Change Pitch’ option and select it.

Step 4: Normally, you can adjust the pitch by taking help from the sliders, but you can also change the pitch manually by adding a percentage. The male pitch originally will have a negative value; change it and set a positive value. You can keep changing until you are satisfied.

Step 5: Lastly, don’t forget to save the changes by hitting the ‘OK’ button at the button and saving the file to your respective device.

Part 4. How to Create Robot Voice in Audacity?

As we have mentioned, Audacity is an audio voice changer, so you must know that Audacity also can change your voice into a robotic voice. Among the different voices, the robot voice sounds interesting, and it’s fun to create. If you are excited to learn to create robot voice in Audacity, follow the guiding steps shared below:

Step 1: For creating an extraordinary robotic voice, start by launching Audacity on your device. After it opens, it’s time to record your voice to create a robot voice. Or else, head to the ‘File’ tab and import your audio file from your device to Audacity from the ‘Open’ option.

Step 2: After this, to start the editing, you need a stereo track on the timeline. For doing this, navigate ‘Tracks’ from the top menu and click on it. Next, hover on the ‘Add New’ option to open its sub-menu. You will see the ‘Stereo Track’ option, select it, and copy-paste the audio file in the new section.

Step 3: Let’s start with the fun part, the editing and adjusting different features. Start by opening the ‘Effects’ tab, and from the long list of options, select ‘Echo.’ There, you can enter the ‘Delay Time’ and change other fields as well.

Step 4: Preview the audio and move on to the next setting. Open the ‘Effects’ section and look for the ‘Change Pitch’ option. You can change and adjust the pitch according to your desire and preview the file again.

Step 5: For creating a robot voice, you can also set the tempo. For that, head to the ‘Change Tempo’ option under the ‘Effects’ section and set the value to minus. Keep adjusting the different effects until you get your perfect robot voice.

Bottom Line

Audacity is not only a great audio editor; it is also a stunning audio voice changer. The software comes with a lot of effects that can completely transform your voice to an unrecognizable level. You can sound like a robot, male, female, and whatever you want with Audacity voice changer. Do you know any video editor that offers sound effects?

If you don’t know, let us introduce Wondershare Filmora Video Editor . This wonderous software is loaded with many editing features to create the best videos. Not only trim, cut, crop, but the software also offers you features like split-screen, chroma key background, keyframing, color match, motion tracking, and whatnot.

Apart from this, this video editor is a hub for cool sound effects and editing elements from its media library, Filmstock. You get a wide range of sound effects, titles, transitions, and many more elements.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Top 5 Guitar Recording Software

Digital Audio Workstations (DAW) is the basic need for music artists to record and share it with their fans and listeners. The guitar recording software plays a pivotal role in producing and editing audio to make it ready for the outside world. The article takes complete responsibility for featuring five guitar recording software with their features. So, let us begin. Shall we?

Part 1: 5 Best Guitar Recording Software in 2024

Are you ready to jump into this subsection? You should be! The following section shall make your life easy and bearable. You can take our word for it.

The choice of the best guitar recording software is essential. It is because the software is pretty much the basis for a successful music career. Don’t you agree? The sub-section reflects upon two things. Introducing the five exceptional Digital Audio Workstations and their features with it. So, why wait? Let us dive right in!

FL Studio

FL Studio guitar recording software used to be known as the Fruity Loops. FL Studio is the ideal key for you to produce amazing beats most effortlessly. One of the workable features of FL Studio revolves around its songwriting. The software plays a phenomenal role acting as a powerful loop-based songwriting and creation tool.

Before knowing how to record guitar on PC, it is important to understand the workable functions of FL Studio. The user is free to build a drum beat, lay down a chord progression, and create a melody. The channel effects help with the final output by offering compression, saturation, equalization, and reverb.

The floating mixer window creates dynamic arrangements through the panning, rises, falls, and focal points. Want to know more features of FL Studio? Follow our lead!

• 11 synths and nine drum machines help you control your music.
• The VST and AU support accommodates the virtual instrument and effects libraries as you expand.
• The visible automation clips can be manipulated easily.

Let us move to the next guitar recording mic tool! Are you ready?

Ableton Live

Ableton Live is a guitar recording software that is compatible with both Mac and Windows. The software is ideal for a creative professional to access latency-free backing tracks with virtual instrumentation. Ableton Live can be counted upon to offer a streamlined interface with a reasonable price and is perfect for a beginner.

Before stepping into how to record guitars, it is mandatory to know what this Digital Audio Workstation brings to the table. Ableton Live constitutes a diverse range of audio and MIDI effects, more than 1500 sounds, and whatnot. The session and arrangement view of Ableton Live compels the artists to start building music and sounds.

Are you looking for more? Continue exploring the tool!

• The Help view provides the user with tutorials and tips starting from track setup, settings to quantization.
• There are around 15 software instruments that help you create magic in the music world.
• The mode overlay is facilitated with the highly interactive help view.

Did you come here to learn about Cubase? Worry no more! We are moving on to the next guitar recording software!

Cubase

Cubase has to be your best bet if you are serious with your career. Allow us to introduce the readers to a powerful mixer and comprehensive editing software! At the moment, Cubase guitar recording software is the leading recording and editing application. You are free to start creating your music and bring your production and editing skills to the next level.

Before focusing on how to record electric guitar, let us keep you warm by offering what you are looking for. Cubase comes up with an interface that has traditional hardware models. You can go hands-free as well. Additionally, get ready to make virtual guitar amps.

It has all the features that a composer seeks in their Digital Audio Workstation. Cubase has more to offer. Follow the pointers below to know!

• The multiple audio effects make the process easy and productive.
• The popular guitar plugins have made Cubase a renowned name in the music era.
• Cubase supports ARA, AFA, MediaBay, and Chord Assistant.

Are you a fan of Logic Pro X? Let us embark on a journey to know their traits! Shall we?

Logic Pro X

Logic Pro X is another guitar recording software that got famous in a short time. Accepted and used by guitar lovers and music creators, Apple Logic Pro X is a strong software, especially for multi-touch mixing. The application provides the music addicts with the Drummer feature to collaborate with a skilled beat programmer.

The guitar recording mic has a professional touch to it. The users are expected to find the right blend of samples and loops as it will help make the song sections . The song sections then aid in producing the magic song. The large array of bundled instruments and effects greatly gives the user value for money.

With effective spatial audio tools and Dolby Atmos, Logic Pro X compels you to get creative and comfortable at the same time. Are you craving to know the characteristics of Logic Pro X? Resume scrolling the tool!

• Use the software for professional songwriting, editing, mixing, and creating a beat.
• The Logic Remote function helps control the music-making sessions from iPad and iPhone.
• The creativity is fueled by accessing a massive collection of plugins and sounds.

Let us move on to the next magical software! Are you excited about this journey?

Apple GarageBand

Available for every Mac and iOS user, Apple GarageBand guitar recording software is one of its kind. If you are into music production and looking for a straightforward tool, you know the answer now! With an integrated and streamlined interface, novice musicians can find this tool as their best bet. The single multipaned window lets the user set up the workplace effortlessly.

Apple GarageBand comes up with a built-in virtual drummer, various sounds to play, and Apple Loops. There are also some great lessons for guitar and piano. It aids you to progress with the instrument of your liking. More importantly, you can create human-sounding drum tracks or access an impeccable array of realistic amps with sounds.

Following are some additional attributes of Apple GarageBand. Let us have a peek!

• There is a sound library, presets for guitar and voice, and session drummers.
• The Live Loops makes it fun to develop electronic music.
• The multi-touch gestures, DJ-style transitions, and Remix FX allows you to be creative in the process.

Conclusion

Creative professionals like music artists need software that allows them to record their music and edit it. Without such software, it would be hard to achieve a career. The article informed the readers of five guitar recording software, inclusive of their features. Guitarists are expected to make the right decision by setting out their priorities and offerings of the software. Don’t you agree?

Let us move to the next guitar recording mic tool! Are you ready?

Ableton Live

Ableton Live is a guitar recording software that is compatible with both Mac and Windows. The software is ideal for a creative professional to access latency-free backing tracks with virtual instrumentation. Ableton Live can be counted upon to offer a streamlined interface with a reasonable price and is perfect for a beginner.

Before stepping into how to record guitars, it is mandatory to know what this Digital Audio Workstation brings to the table. Ableton Live constitutes a diverse range of audio and MIDI effects, more than 1500 sounds, and whatnot. The session and arrangement view of Ableton Live compels the artists to start building music and sounds.

Are you looking for more? Continue exploring the tool!

• The Help view provides the user with tutorials and tips starting from track setup, settings to quantization.
• There are around 15 software instruments that help you create magic in the music world.
• The mode overlay is facilitated with the highly interactive help view.

Did you come here to learn about Cubase? Worry no more! We are moving on to the next guitar recording software!

Cubase

Cubase has to be your best bet if you are serious with your career. Allow us to introduce the readers to a powerful mixer and comprehensive editing software! At the moment, Cubase guitar recording software is the leading recording and editing application. You are free to start creating your music and bring your production and editing skills to the next level.

Before focusing on how to record electric guitar, let us keep you warm by offering what you are looking for. Cubase comes up with an interface that has traditional hardware models. You can go hands-free as well. Additionally, get ready to make virtual guitar amps.

It has all the features that a composer seeks in their Digital Audio Workstation. Cubase has more to offer. Follow the pointers below to know!

• The multiple audio effects make the process easy and productive.
• The popular guitar plugins have made Cubase a renowned name in the music era.
• Cubase supports ARA, AFA, MediaBay, and Chord Assistant.

Are you a fan of Logic Pro X? Let us embark on a journey to know their traits! Shall we?

Logic Pro X

Logic Pro X is another guitar recording software that got famous in a short time. Accepted and used by guitar lovers and music creators, Apple Logic Pro X is a strong software, especially for multi-touch mixing. The application provides the music addicts with the Drummer feature to collaborate with a skilled beat programmer.

The guitar recording mic has a professional touch to it. The users are expected to find the right blend of samples and loops as it will help make the song sections . The song sections then aid in producing the magic song. The large array of bundled instruments and effects greatly gives the user value for money.

With effective spatial audio tools and Dolby Atmos, Logic Pro X compels you to get creative and comfortable at the same time. Are you craving to know the characteristics of Logic Pro X? Resume scrolling the tool!

• Use the software for professional songwriting, editing, mixing, and creating a beat.
• The Logic Remote function helps control the music-making sessions from iPad and iPhone.
• The creativity is fueled by accessing a massive collection of plugins and sounds.

Let us move on to the next magical software! Are you excited about this journey?

Apple GarageBand

Available for every Mac and iOS user, Apple GarageBand guitar recording software is one of its kind. If you are into music production and looking for a straightforward tool, you know the answer now! With an integrated and streamlined interface, novice musicians can find this tool as their best bet. The single multipaned window lets the user set up the workplace effortlessly.

Apple GarageBand comes up with a built-in virtual drummer, various sounds to play, and Apple Loops. There are also some great lessons for guitar and piano. It aids you to progress with the instrument of your liking. More importantly, you can create human-sounding drum tracks or access an impeccable array of realistic amps with sounds.

Following are some additional attributes of Apple GarageBand. Let us have a peek!

• There is a sound library, presets for guitar and voice, and session drummers.
• The Live Loops makes it fun to develop electronic music.
• The multi-touch gestures, DJ-style transitions, and Remix FX allows you to be creative in the process.

Conclusion

Creative professionals like music artists need software that allows them to record their music and edit it. Without such software, it would be hard to achieve a career. The article informed the readers of five guitar recording software, inclusive of their features. Guitarists are expected to make the right decision by setting out their priorities and offerings of the software. Don’t you agree?

Let us move to the next guitar recording mic tool! Are you ready?

Ableton Live

Ableton Live is a guitar recording software that is compatible with both Mac and Windows. The software is ideal for a creative professional to access latency-free backing tracks with virtual instrumentation. Ableton Live can be counted upon to offer a streamlined interface with a reasonable price and is perfect for a beginner.

Before stepping into how to record guitars, it is mandatory to know what this Digital Audio Workstation brings to the table. Ableton Live constitutes a diverse range of audio and MIDI effects, more than 1500 sounds, and whatnot. The session and arrangement view of Ableton Live compels the artists to start building music and sounds.

Are you looking for more? Continue exploring the tool!

• The Help view provides the user with tutorials and tips starting from track setup, settings to quantization.
• There are around 15 software instruments that help you create magic in the music world.
• The mode overlay is facilitated with the highly interactive help view.

Did you come here to learn about Cubase? Worry no more! We are moving on to the next guitar recording software!

Cubase

Cubase has to be your best bet if you are serious with your career. Allow us to introduce the readers to a powerful mixer and comprehensive editing software! At the moment, Cubase guitar recording software is the leading recording and editing application. You are free to start creating your music and bring your production and editing skills to the next level.

Before focusing on how to record electric guitar, let us keep you warm by offering what you are looking for. Cubase comes up with an interface that has traditional hardware models. You can go hands-free as well. Additionally, get ready to make virtual guitar amps.

It has all the features that a composer seeks in their Digital Audio Workstation. Cubase has more to offer. Follow the pointers below to know!

• The multiple audio effects make the process easy and productive.
• The popular guitar plugins have made Cubase a renowned name in the music era.
• Cubase supports ARA, AFA, MediaBay, and Chord Assistant.

Are you a fan of Logic Pro X? Let us embark on a journey to know their traits! Shall we?

Logic Pro X

Logic Pro X is another guitar recording software that got famous in a short time. Accepted and used by guitar lovers and music creators, Apple Logic Pro X is a strong software, especially for multi-touch mixing. The application provides the music addicts with the Drummer feature to collaborate with a skilled beat programmer.

The guitar recording mic has a professional touch to it. The users are expected to find the right blend of samples and loops as it will help make the song sections . The song sections then aid in producing the magic song. The large array of bundled instruments and effects greatly gives the user value for money.

With effective spatial audio tools and Dolby Atmos, Logic Pro X compels you to get creative and comfortable at the same time. Are you craving to know the characteristics of Logic Pro X? Resume scrolling the tool!

• Use the software for professional songwriting, editing, mixing, and creating a beat.
• The Logic Remote function helps control the music-making sessions from iPad and iPhone.
• The creativity is fueled by accessing a massive collection of plugins and sounds.

Let us move on to the next magical software! Are you excited about this journey?

Apple GarageBand

Available for every Mac and iOS user, Apple GarageBand guitar recording software is one of its kind. If you are into music production and looking for a straightforward tool, you know the answer now! With an integrated and streamlined interface, novice musicians can find this tool as their best bet. The single multipaned window lets the user set up the workplace effortlessly.

Apple GarageBand comes up with a built-in virtual drummer, various sounds to play, and Apple Loops. There are also some great lessons for guitar and piano. It aids you to progress with the instrument of your liking. More importantly, you can create human-sounding drum tracks or access an impeccable array of realistic amps with sounds.

Following are some additional attributes of Apple GarageBand. Let us have a peek!

• There is a sound library, presets for guitar and voice, and session drummers.
• The Live Loops makes it fun to develop electronic music.
• The multi-touch gestures, DJ-style transitions, and Remix FX allows you to be creative in the process.

Conclusion

Creative professionals like music artists need software that allows them to record their music and edit it. Without such software, it would be hard to achieve a career. The article informed the readers of five guitar recording software, inclusive of their features. Guitarists are expected to make the right decision by setting out their priorities and offerings of the software. Don’t you agree?

Let us move to the next guitar recording mic tool! Are you ready?

Ableton Live

Ableton Live is a guitar recording software that is compatible with both Mac and Windows. The software is ideal for a creative professional to access latency-free backing tracks with virtual instrumentation. Ableton Live can be counted upon to offer a streamlined interface with a reasonable price and is perfect for a beginner.

Before stepping into how to record guitars, it is mandatory to know what this Digital Audio Workstation brings to the table. Ableton Live constitutes a diverse range of audio and MIDI effects, more than 1500 sounds, and whatnot. The session and arrangement view of Ableton Live compels the artists to start building music and sounds.

Are you looking for more? Continue exploring the tool!

• The Help view provides the user with tutorials and tips starting from track setup, settings to quantization.
• There are around 15 software instruments that help you create magic in the music world.
• The mode overlay is facilitated with the highly interactive help view.

Did you come here to learn about Cubase? Worry no more! We are moving on to the next guitar recording software!

Cubase

Cubase has to be your best bet if you are serious with your career. Allow us to introduce the readers to a powerful mixer and comprehensive editing software! At the moment, Cubase guitar recording software is the leading recording and editing application. You are free to start creating your music and bring your production and editing skills to the next level.

Before focusing on how to record electric guitar, let us keep you warm by offering what you are looking for. Cubase comes up with an interface that has traditional hardware models. You can go hands-free as well. Additionally, get ready to make virtual guitar amps.

It has all the features that a composer seeks in their Digital Audio Workstation. Cubase has more to offer. Follow the pointers below to know!

• The multiple audio effects make the process easy and productive.
• The popular guitar plugins have made Cubase a renowned name in the music era.
• Cubase supports ARA, AFA, MediaBay, and Chord Assistant.

Are you a fan of Logic Pro X? Let us embark on a journey to know their traits! Shall we?

Logic Pro X

Logic Pro X is another guitar recording software that got famous in a short time. Accepted and used by guitar lovers and music creators, Apple Logic Pro X is a strong software, especially for multi-touch mixing. The application provides the music addicts with the Drummer feature to collaborate with a skilled beat programmer.

The guitar recording mic has a professional touch to it. The users are expected to find the right blend of samples and loops as it will help make the song sections . The song sections then aid in producing the magic song. The large array of bundled instruments and effects greatly gives the user value for money.

With effective spatial audio tools and Dolby Atmos, Logic Pro X compels you to get creative and comfortable at the same time. Are you craving to know the characteristics of Logic Pro X? Resume scrolling the tool!

• Use the software for professional songwriting, editing, mixing, and creating a beat.
• The Logic Remote function helps control the music-making sessions from iPad and iPhone.
• The creativity is fueled by accessing a massive collection of plugins and sounds.

Let us move on to the next magical software! Are you excited about this journey?

Apple GarageBand

Available for every Mac and iOS user, Apple GarageBand guitar recording software is one of its kind. If you are into music production and looking for a straightforward tool, you know the answer now! With an integrated and streamlined interface, novice musicians can find this tool as their best bet. The single multipaned window lets the user set up the workplace effortlessly.

Apple GarageBand comes up with a built-in virtual drummer, various sounds to play, and Apple Loops. There are also some great lessons for guitar and piano. It aids you to progress with the instrument of your liking. More importantly, you can create human-sounding drum tracks or access an impeccable array of realistic amps with sounds.

Following are some additional attributes of Apple GarageBand. Let us have a peek!

• There is a sound library, presets for guitar and voice, and session drummers.
• The Live Loops makes it fun to develop electronic music.
• The multi-touch gestures, DJ-style transitions, and Remix FX allows you to be creative in the process.

Conclusion

Creative professionals like music artists need software that allows them to record their music and edit it. Without such software, it would be hard to achieve a career. The article informed the readers of five guitar recording software, inclusive of their features. Guitarists are expected to make the right decision by setting out their priorities and offerings of the software. Don’t you agree?

Mastering Sound: Essential iMovie Audio Enhancement Techniques

All You Need to Know About iMovie Audio Editing

Marion Dubois

Oct 26, 2023• Proven solutions

iMovie offers a fantastic platform for video editing where you can merge multiple video clips to create something very phenomenal. Plus, it’s simply here to navigate between different scenes, edit video clips and save results directly to the digital format without making any videotape transformations.

It provides lots of things to beginners and professionals with its easy-to-use interface without any quality loss for your results even after adding lots of transitions, changes, and effects.

However, it is not accessible to master software, precisely when you’re not familiar with it, or you’re not its professional user. So today, we’d like to explore or pay attention to iMovie’s audio editing steps, tips, and tricks to help you become an iMovie master quickly.

What’s more, a practical yet professional iMovie alternative software is also advisable in this guide. So when the iMovie cannot fulfil your editing requirements, why don’t you hop on an iMovie alternative software?

Now, let’s get started!

Part 1: How to Edit Audio Clips in iMovie?

To learn how to edit audio clips in iMovie, you can use actions in the menu along with the quick shortcuts to make adjustments to your audio clips in iMovie on Mac. It’s a tip for your convenience!

Trim Audio Clips

There are a couple of options to trim an audio clip in iMovie.

#1. Trim to Playhead

You can place the playhead in your timeline. Now, trim an audio clip to that exact spot. Next, start moving the playhead and do one from the following.

• Select Modify > Trim to Playhead option in the menu bar.
• Right-click the audio clip and select the option of Trim to Playhead in the shortcut menu.

#2. Use the Clip Trimmer

You can use the Clip Trimmer to trim an exact section of the clip.

Step 1. Right-click the audio clip and select Show Clip Trimmer in the shortcut menu.

Step 2. After the Clip Trimmer shows, select a section you wish to trim by dragging the arrows right and left while holding the white lines. The area within those lines is what will get entirely deleted.

Move the entire clip but keep the trim area in place if arrows turn to a film strip icon.

Step 3. Click Close Clip Trimmer after you finish this section.

Shorten or Lengthen Audio Clips

You can easily shorten or lengthen an audio clip in iMovie. Just choose the pin in the timeline and drag one of its edges. The duration of the clip change will change as you carry. And a new course will be displayed after you finish in the upper left menu.

You can also set the clip’s duration to an exact time. Select the clip in the timeline and hit the Clip Information (small letter “i”) tab located above the Viewer. Put the value of the time you want in seconds in the Duration box on the right.

Change the Speed of an Audio Clip

You may want to speed up or slow down an audio clip while editing music in iMovie. So, here’s what you need to do!

Method 1. Click the Speed button above the Viewer. Next, select Custom in the Speed drop-down box and enter a percentage next to it. You can also set a different speed in that box if you prefer.

Method 2. Right-click the clip and select Show Speed Editor from the shortcut menu. A slider will then display at the top of the clip that you can move to change the speed.

Adjust the Volume of an Audio Clip

You can set the audio clip’s volume at higher or lower, or even mute it. Just select the clip and then do one of the following.

• Select the Volume tab above the Viewer option and move the slider to the percentage of volume. Hit the Mute button to mute the audio clip.
• Tap inside the clip, and when the two-sided arrow appears, drag up or down to adjust the volume.

Fade an Audio Clip

While editing audio in iMovie, you can also fade in or out the clip. Choose a clip in the timeline and then drag the fade handle (small circle) at either the ending or the beginning of the clip to make a fade-out or a fade-in effect.

As you drag, you will see the arcs displaying the shadow for the clips fade in or fade out.

How to Edit Audio Clips in iMovie on iOS?

The iMovie timeline is where you sort or organize all your audio clips, such as the special effects and background music. Audio clips are always present below the video clips in the timeline. To edit audio clips in iMovie on your iPhones or iPads, you can follow the guide belo

Move an Audio Clip

You can transfer the whole audio clip, except the background music, to another location.

• Touch and hold the purple or blue audio clip with your project open in the timeline until it comes over the timeline bar.
• Drag the clip to another place and release.

Adjust the Audio Clip’s Duration

Step 1. While the project is launched in the timeline, tap the audio clip (in blue or purple) or the background music clip you wish to adjust.

Step 2. Now, you can see the display of yellow trim handles. Drag them either at the end of the clip to the points where you wish the audio to start and end. If a trim handle won’t move left or right, it simply indicates there is no additional audio to work with on that clip’s end.

Step 3. Tap outside the audio clip and let the trim handles disappear.

Split an Audio Clip

There are around two options to split audio clips in iMovie. You can remove unwanted parts or adjust each section’s duration, volume, or speed while you split a clip.

Step 1. With your launched project in the timeline, scroll the timeline to the playhead’s position where you want to split the audio.

Step 2. Click the audio clip to display the inspector at the screen’s bottom.

Step 3. Now, click the Actions button, and select the Split tab.

Or, you can tap the clip (it becomes outlined in yellow), then swipe above the playhead as if you were placing your finger to slide over it.

Detach the Audio Part from a Video

You can detach the video clip’s audio to remove or edit it as a separate video clip.

Step 1. When the project is open in the timeline, select a video clip and display the inspector at the screen’s bottom.

Step 2. Tap the Actions button, then tap Detach.

Step 3. A new blue-colored audio clip will then appear below the video project. You can now move, edit, or delete the audio clip separately from its parent video clip.

Move Audio to the Foreground or Background

To ensure the sound in your video clips can listen above the background music, iMovie implies audio “ducking”. Ducking lowers the background music clips’ volume whenever there’s a video clip whose sound is playing simultaneously.

You can select which audio clips are in the foreground or the background.

Step 1. Select the timeline’s audio clip to display the inspector at the screen’s bottom.

Step 2. Hit the Actions tab and proceed with selecting the Foreground or Background.

The clip color changes to indicate whether it’s the background music (green) or foreground audio (blue or purple).

Part 2: An Easier Way to Edit Audio Clips

Windows users might be wandering for an alternative to iMovie as this software tool is only compatible with Mac and iOS devices. You will be thrilled to know that Wondershare Filmora can serve you with all synonymous and extra features more than the iMovie, and it works significantly in the Windows environment.

This latest software tool also assists users with easy video editing tricks and the intuitive interface that best serves quality editing to beginners and professionals.

Despite the basic video editing features, such as trimming, splitting, merging, cutting, and cropping, Filmora also offers various advanced editing elements that are far better than iMovie. And, with its video editing features, you can make a green screen effect, stabilize your video footage, reverse your video clip, and more.

Moreover, you can enjoy royalty-free music tracks for different themes, such as Young and Bright, Tender and Sentimental, Rock, Folk, Electronic Rock, and Hipster Folk, for selection.

All this will be available with a single program called Wondershare Filmora to take advantage of them for free. You do not have to search the background music files like a needle in a haystack. The program has nicely organized the music themes into six different folders. You can apply it for your video and make advanced editing, such as split/trim the clip, adjust the playback speed, pitch, volume, etc.

How to Edit Audio with Wondershare Filmora?

In Wondershare Filmora, you can insert background music and other files from the audio library or your computer. You can even record your voiceover using it.

Add Background Music

Filmora provides a royalty-free music library you can access or import your music within the program. You can select a song from the royalty-free audio library and use it for free.

The audio library has categorized into: YOUNG & BRIGHT, TENDER & SENTIMENTAL, ROCK, FOLK, and ELECTRONIC. The different kinds of sound effects are also available under the Sound Effects tab.

Once you find a sound effect or a song, either right-click on it and go with the Apply or drag and drop it into an audio track in the timeline.

Or, you can click the Import button above the Media Library panel to browse for audio files in your PC system. Then, select and import it into the Media Library when you find the song or other audio files you wish to add.

Once you place the song in the timeline, double-click to edit it in the Audio editing panel. You can apply fade-in or fade-out effects or adjust the pitch and volume. Filmora lets you add up to 100 audio tracks.

Split Audio Clips

Choose your audio clip and place the playhead where you want to split it, then right-click on the clip and choose the Split tab or click the Split icon right above on the toolbar.

Adjust Audio Settings

Double click on the audio clip to make adjustments to your audio. Open a panel with adjustment sliders in the timeline for pitch and volume.

Another element that you’ll find in this panel is Denoise, which is a feature that can remove background noise from your audio clips.

For a more professional audio editing experience, you can also access the Audio Equalizer from this panel. Select from presets or make manual adjustments by hitting the Customize tab.

Play it when you are done and, if you’re not happy with the results, tap the Reset button to start over.

Audio Equalizer (EQ)

All videos have plenty of sounds like speech, music, or sound effects. Changing the strength of sound waves will help you to mix these sounds within a coherent soundtrack.

Locate your audio clip in an audio track and double-click on it to open the Audio settings menu window. A drop-down menu next to the Equalizer feature will display presets such as Classic, Default, Rock’n’Roll, Techno, Sparkle, Bass, Hard Rock, Pop, Ska, Blues, Folk, Acoustic, Custom, or Country. Choose the preset that best fits your current needs and hit the OK tab to apply it.

Now, hit the Customize tab next to the drop-down bar to adjust the Audio Equalizer manually. Drag the sliders up or down and make the adjustments until you find their ideal value. Finally, hit OK and save your settings.

Besides the included music tracks and sound effects in Filmora initially, you can also find more audio files from Filmora’s effects store – Filmstock, and even get some free music and sound.

Part 3: iMovie Audio Editing Tips & Tricks

iMovie is a great video editor for Mac computers. After understanding the best alternative of iMovie sound editin g, let’s check out some tips on editing audio in iMovie best.

The explanations and screenshots below are for iMovie 10 only. However, the steps are a bit similar to older versions.

So, here we go!

1. Use Waveforms to See What You Hear

To properly edit the audio track in iMovie, you need a good pair of headphones and speakers to hear the sound, but you also need to check the sound.

You can check the sound in iMovie by considering the waveforms on each clip. If the waveforms can’t be seen, go to the View drop-down menu and choose the Show Waveforms option. The clip size for your project can also adjust to get an even better appearance for each video clip.

The waveforms will display the volume level of a clip and give you a good idea of what sections will require to turn up or down. You can also check how the levels of different clips compare to one another.

2. Audio Adjustments

With the help of Adjust tab in the top right, you can access some basic audio editing tools for changing your selected clip’s volume or changing the volume of other relative clips in the project.

The adjustment window of audio also provides basic audio equalization and noise reduction tools, along with a range of effects - from echo to robot - that will change the way people in your video sound.

3. Edit Audio with the Timeline

iMovie assists you in adjusting the audio within the clips themselves. Each pin has a volume bar, moving up and down to decrease or increase the audio level. The clips also contain Fade In and Fade Out tabs at the beginning and end, dragging to adjust the fade’s length.

By adding a short fade effect, whether in or out, the sound becomes relatively smoother and less conflicting to the ear when a new clip begins.

4. Detach the Audio

By default, iMovie keeps the video and audio sections of clips together for convenience. Yet, you want to use the video and audio sections of a clip separately sometimes.

For this purpose, choose your clip in the timeline, visit the Modify drop-down menu, and hit the Detach Audio button. You’ll now have two clips - one with the images and another with the sound.

A lot you can do with the detached audio. For instance, you could extend the audio clip to begin before the video plays, or so that it plays for a few seconds even after the video fades out. You could also cut out pieces from the audio’s middle portion while leaving the video intact.

Conclusion

Coming towards the end of the discussion, after understanding iMovie audio editingand going through an elaborated alternative of iMovie application, we decided that Wondershare Filmora sounds the best out of it. It allows you to flawlessly edit video and audio files on your desktop, with various inbuilt royalty-free music tracks to select from that can further improve your project’s presence.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Oct 26, 2023• Proven solutions

iMovie offers a fantastic platform for video editing where you can merge multiple video clips to create something very phenomenal. Plus, it’s simply here to navigate between different scenes, edit video clips and save results directly to the digital format without making any videotape transformations.

It provides lots of things to beginners and professionals with its easy-to-use interface without any quality loss for your results even after adding lots of transitions, changes, and effects.

However, it is not accessible to master software, precisely when you’re not familiar with it, or you’re not its professional user. So today, we’d like to explore or pay attention to iMovie’s audio editing steps, tips, and tricks to help you become an iMovie master quickly.

What’s more, a practical yet professional iMovie alternative software is also advisable in this guide. So when the iMovie cannot fulfil your editing requirements, why don’t you hop on an iMovie alternative software?

Now, let’s get started!

Part 1: How to Edit Audio Clips in iMovie?

To learn how to edit audio clips in iMovie, you can use actions in the menu along with the quick shortcuts to make adjustments to your audio clips in iMovie on Mac. It’s a tip for your convenience!

Trim Audio Clips

There are a couple of options to trim an audio clip in iMovie.

#1. Trim to Playhead

You can place the playhead in your timeline. Now, trim an audio clip to that exact spot. Next, start moving the playhead and do one from the following.

• Select Modify > Trim to Playhead option in the menu bar.
• Right-click the audio clip and select the option of Trim to Playhead in the shortcut menu.

#2. Use the Clip Trimmer

You can use the Clip Trimmer to trim an exact section of the clip.

Step 1. Right-click the audio clip and select Show Clip Trimmer in the shortcut menu.

Step 2. After the Clip Trimmer shows, select a section you wish to trim by dragging the arrows right and left while holding the white lines. The area within those lines is what will get entirely deleted.

Move the entire clip but keep the trim area in place if arrows turn to a film strip icon.

Step 3. Click Close Clip Trimmer after you finish this section.

Shorten or Lengthen Audio Clips

You can easily shorten or lengthen an audio clip in iMovie. Just choose the pin in the timeline and drag one of its edges. The duration of the clip change will change as you carry. And a new course will be displayed after you finish in the upper left menu.

You can also set the clip’s duration to an exact time. Select the clip in the timeline and hit the Clip Information (small letter “i”) tab located above the Viewer. Put the value of the time you want in seconds in the Duration box on the right.

Change the Speed of an Audio Clip

You may want to speed up or slow down an audio clip while editing music in iMovie. So, here’s what you need to do!

Method 1. Click the Speed button above the Viewer. Next, select Custom in the Speed drop-down box and enter a percentage next to it. You can also set a different speed in that box if you prefer.

Method 2. Right-click the clip and select Show Speed Editor from the shortcut menu. A slider will then display at the top of the clip that you can move to change the speed.

Adjust the Volume of an Audio Clip

You can set the audio clip’s volume at higher or lower, or even mute it. Just select the clip and then do one of the following.

• Select the Volume tab above the Viewer option and move the slider to the percentage of volume. Hit the Mute button to mute the audio clip.
• Tap inside the clip, and when the two-sided arrow appears, drag up or down to adjust the volume.

Fade an Audio Clip

While editing audio in iMovie, you can also fade in or out the clip. Choose a clip in the timeline and then drag the fade handle (small circle) at either the ending or the beginning of the clip to make a fade-out or a fade-in effect.

As you drag, you will see the arcs displaying the shadow for the clips fade in or fade out.

How to Edit Audio Clips in iMovie on iOS?

The iMovie timeline is where you sort or organize all your audio clips, such as the special effects and background music. Audio clips are always present below the video clips in the timeline. To edit audio clips in iMovie on your iPhones or iPads, you can follow the guide belo

Move an Audio Clip

You can transfer the whole audio clip, except the background music, to another location.

• Touch and hold the purple or blue audio clip with your project open in the timeline until it comes over the timeline bar.
• Drag the clip to another place and release.

Adjust the Audio Clip’s Duration

Step 1. While the project is launched in the timeline, tap the audio clip (in blue or purple) or the background music clip you wish to adjust.

Step 2. Now, you can see the display of yellow trim handles. Drag them either at the end of the clip to the points where you wish the audio to start and end. If a trim handle won’t move left or right, it simply indicates there is no additional audio to work with on that clip’s end.

Step 3. Tap outside the audio clip and let the trim handles disappear.

Split an Audio Clip

There are around two options to split audio clips in iMovie. You can remove unwanted parts or adjust each section’s duration, volume, or speed while you split a clip.

Step 1. With your launched project in the timeline, scroll the timeline to the playhead’s position where you want to split the audio.

Step 2. Click the audio clip to display the inspector at the screen’s bottom.

Step 3. Now, click the Actions button, and select the Split tab.

Or, you can tap the clip (it becomes outlined in yellow), then swipe above the playhead as if you were placing your finger to slide over it.

Detach the Audio Part from a Video

You can detach the video clip’s audio to remove or edit it as a separate video clip.

Step 1. When the project is open in the timeline, select a video clip and display the inspector at the screen’s bottom.

Step 2. Tap the Actions button, then tap Detach.

Step 3. A new blue-colored audio clip will then appear below the video project. You can now move, edit, or delete the audio clip separately from its parent video clip.

Move Audio to the Foreground or Background

To ensure the sound in your video clips can listen above the background music, iMovie implies audio “ducking”. Ducking lowers the background music clips’ volume whenever there’s a video clip whose sound is playing simultaneously.

You can select which audio clips are in the foreground or the background.

Step 1. Select the timeline’s audio clip to display the inspector at the screen’s bottom.

Step 2. Hit the Actions tab and proceed with selecting the Foreground or Background.

The clip color changes to indicate whether it’s the background music (green) or foreground audio (blue or purple).

Part 2: An Easier Way to Edit Audio Clips

Windows users might be wandering for an alternative to iMovie as this software tool is only compatible with Mac and iOS devices. You will be thrilled to know that Wondershare Filmora can serve you with all synonymous and extra features more than the iMovie, and it works significantly in the Windows environment.

This latest software tool also assists users with easy video editing tricks and the intuitive interface that best serves quality editing to beginners and professionals.

Despite the basic video editing features, such as trimming, splitting, merging, cutting, and cropping, Filmora also offers various advanced editing elements that are far better than iMovie. And, with its video editing features, you can make a green screen effect, stabilize your video footage, reverse your video clip, and more.

Moreover, you can enjoy royalty-free music tracks for different themes, such as Young and Bright, Tender and Sentimental, Rock, Folk, Electronic Rock, and Hipster Folk, for selection.

All this will be available with a single program called Wondershare Filmora to take advantage of them for free. You do not have to search the background music files like a needle in a haystack. The program has nicely organized the music themes into six different folders. You can apply it for your video and make advanced editing, such as split/trim the clip, adjust the playback speed, pitch, volume, etc.

How to Edit Audio with Wondershare Filmora?

In Wondershare Filmora, you can insert background music and other files from the audio library or your computer. You can even record your voiceover using it.

Add Background Music

Filmora provides a royalty-free music library you can access or import your music within the program. You can select a song from the royalty-free audio library and use it for free.

The audio library has categorized into: YOUNG & BRIGHT, TENDER & SENTIMENTAL, ROCK, FOLK, and ELECTRONIC. The different kinds of sound effects are also available under the Sound Effects tab.

Once you find a sound effect or a song, either right-click on it and go with the Apply or drag and drop it into an audio track in the timeline.

Or, you can click the Import button above the Media Library panel to browse for audio files in your PC system. Then, select and import it into the Media Library when you find the song or other audio files you wish to add.

Once you place the song in the timeline, double-click to edit it in the Audio editing panel. You can apply fade-in or fade-out effects or adjust the pitch and volume. Filmora lets you add up to 100 audio tracks.

Split Audio Clips

Choose your audio clip and place the playhead where you want to split it, then right-click on the clip and choose the Split tab or click the Split icon right above on the toolbar.

Adjust Audio Settings

Double click on the audio clip to make adjustments to your audio. Open a panel with adjustment sliders in the timeline for pitch and volume.

Another element that you’ll find in this panel is Denoise, which is a feature that can remove background noise from your audio clips.

For a more professional audio editing experience, you can also access the Audio Equalizer from this panel. Select from presets or make manual adjustments by hitting the Customize tab.

Play it when you are done and, if you’re not happy with the results, tap the Reset button to start over.

Audio Equalizer (EQ)

All videos have plenty of sounds like speech, music, or sound effects. Changing the strength of sound waves will help you to mix these sounds within a coherent soundtrack.

Locate your audio clip in an audio track and double-click on it to open the Audio settings menu window. A drop-down menu next to the Equalizer feature will display presets such as Classic, Default, Rock’n’Roll, Techno, Sparkle, Bass, Hard Rock, Pop, Ska, Blues, Folk, Acoustic, Custom, or Country. Choose the preset that best fits your current needs and hit the OK tab to apply it.

Now, hit the Customize tab next to the drop-down bar to adjust the Audio Equalizer manually. Drag the sliders up or down and make the adjustments until you find their ideal value. Finally, hit OK and save your settings.

Besides the included music tracks and sound effects in Filmora initially, you can also find more audio files from Filmora’s effects store – Filmstock, and even get some free music and sound.

Part 3: iMovie Audio Editing Tips & Tricks

iMovie is a great video editor for Mac computers. After understanding the best alternative of iMovie sound editin g, let’s check out some tips on editing audio in iMovie best.

The explanations and screenshots below are for iMovie 10 only. However, the steps are a bit similar to older versions.

So, here we go!

1. Use Waveforms to See What You Hear

To properly edit the audio track in iMovie, you need a good pair of headphones and speakers to hear the sound, but you also need to check the sound.

You can check the sound in iMovie by considering the waveforms on each clip. If the waveforms can’t be seen, go to the View drop-down menu and choose the Show Waveforms option. The clip size for your project can also adjust to get an even better appearance for each video clip.

The waveforms will display the volume level of a clip and give you a good idea of what sections will require to turn up or down. You can also check how the levels of different clips compare to one another.

2. Audio Adjustments

With the help of Adjust tab in the top right, you can access some basic audio editing tools for changing your selected clip’s volume or changing the volume of other relative clips in the project.

The adjustment window of audio also provides basic audio equalization and noise reduction tools, along with a range of effects - from echo to robot - that will change the way people in your video sound.

3. Edit Audio with the Timeline

iMovie assists you in adjusting the audio within the clips themselves. Each pin has a volume bar, moving up and down to decrease or increase the audio level. The clips also contain Fade In and Fade Out tabs at the beginning and end, dragging to adjust the fade’s length.

By adding a short fade effect, whether in or out, the sound becomes relatively smoother and less conflicting to the ear when a new clip begins.

4. Detach the Audio

By default, iMovie keeps the video and audio sections of clips together for convenience. Yet, you want to use the video and audio sections of a clip separately sometimes.

For this purpose, choose your clip in the timeline, visit the Modify drop-down menu, and hit the Detach Audio button. You’ll now have two clips - one with the images and another with the sound.

A lot you can do with the detached audio. For instance, you could extend the audio clip to begin before the video plays, or so that it plays for a few seconds even after the video fades out. You could also cut out pieces from the audio’s middle portion while leaving the video intact.

Conclusion

Coming towards the end of the discussion, after understanding iMovie audio editingand going through an elaborated alternative of iMovie application, we decided that Wondershare Filmora sounds the best out of it. It allows you to flawlessly edit video and audio files on your desktop, with various inbuilt royalty-free music tracks to select from that can further improve your project’s presence.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Oct 26, 2023• Proven solutions

iMovie offers a fantastic platform for video editing where you can merge multiple video clips to create something very phenomenal. Plus, it’s simply here to navigate between different scenes, edit video clips and save results directly to the digital format without making any videotape transformations.

It provides lots of things to beginners and professionals with its easy-to-use interface without any quality loss for your results even after adding lots of transitions, changes, and effects.

However, it is not accessible to master software, precisely when you’re not familiar with it, or you’re not its professional user. So today, we’d like to explore or pay attention to iMovie’s audio editing steps, tips, and tricks to help you become an iMovie master quickly.

What’s more, a practical yet professional iMovie alternative software is also advisable in this guide. So when the iMovie cannot fulfil your editing requirements, why don’t you hop on an iMovie alternative software?

Now, let’s get started!

Part 1: How to Edit Audio Clips in iMovie?

To learn how to edit audio clips in iMovie, you can use actions in the menu along with the quick shortcuts to make adjustments to your audio clips in iMovie on Mac. It’s a tip for your convenience!

Trim Audio Clips

There are a couple of options to trim an audio clip in iMovie.

#1. Trim to Playhead

You can place the playhead in your timeline. Now, trim an audio clip to that exact spot. Next, start moving the playhead and do one from the following.

• Select Modify > Trim to Playhead option in the menu bar.
• Right-click the audio clip and select the option of Trim to Playhead in the shortcut menu.

#2. Use the Clip Trimmer

You can use the Clip Trimmer to trim an exact section of the clip.

Step 1. Right-click the audio clip and select Show Clip Trimmer in the shortcut menu.

Step 2. After the Clip Trimmer shows, select a section you wish to trim by dragging the arrows right and left while holding the white lines. The area within those lines is what will get entirely deleted.

Move the entire clip but keep the trim area in place if arrows turn to a film strip icon.

Step 3. Click Close Clip Trimmer after you finish this section.

Shorten or Lengthen Audio Clips

You can easily shorten or lengthen an audio clip in iMovie. Just choose the pin in the timeline and drag one of its edges. The duration of the clip change will change as you carry. And a new course will be displayed after you finish in the upper left menu.

You can also set the clip’s duration to an exact time. Select the clip in the timeline and hit the Clip Information (small letter “i”) tab located above the Viewer. Put the value of the time you want in seconds in the Duration box on the right.

Change the Speed of an Audio Clip

You may want to speed up or slow down an audio clip while editing music in iMovie. So, here’s what you need to do!

Method 1. Click the Speed button above the Viewer. Next, select Custom in the Speed drop-down box and enter a percentage next to it. You can also set a different speed in that box if you prefer.

Method 2. Right-click the clip and select Show Speed Editor from the shortcut menu. A slider will then display at the top of the clip that you can move to change the speed.

Adjust the Volume of an Audio Clip

You can set the audio clip’s volume at higher or lower, or even mute it. Just select the clip and then do one of the following.

• Select the Volume tab above the Viewer option and move the slider to the percentage of volume. Hit the Mute button to mute the audio clip.
• Tap inside the clip, and when the two-sided arrow appears, drag up or down to adjust the volume.

Fade an Audio Clip

While editing audio in iMovie, you can also fade in or out the clip. Choose a clip in the timeline and then drag the fade handle (small circle) at either the ending or the beginning of the clip to make a fade-out or a fade-in effect.

As you drag, you will see the arcs displaying the shadow for the clips fade in or fade out.

How to Edit Audio Clips in iMovie on iOS?

The iMovie timeline is where you sort or organize all your audio clips, such as the special effects and background music. Audio clips are always present below the video clips in the timeline. To edit audio clips in iMovie on your iPhones or iPads, you can follow the guide belo

Move an Audio Clip

You can transfer the whole audio clip, except the background music, to another location.

• Touch and hold the purple or blue audio clip with your project open in the timeline until it comes over the timeline bar.
• Drag the clip to another place and release.

Adjust the Audio Clip’s Duration

Step 1. While the project is launched in the timeline, tap the audio clip (in blue or purple) or the background music clip you wish to adjust.

Step 2. Now, you can see the display of yellow trim handles. Drag them either at the end of the clip to the points where you wish the audio to start and end. If a trim handle won’t move left or right, it simply indicates there is no additional audio to work with on that clip’s end.

Step 3. Tap outside the audio clip and let the trim handles disappear.

Split an Audio Clip

There are around two options to split audio clips in iMovie. You can remove unwanted parts or adjust each section’s duration, volume, or speed while you split a clip.

Step 1. With your launched project in the timeline, scroll the timeline to the playhead’s position where you want to split the audio.

Step 2. Click the audio clip to display the inspector at the screen’s bottom.

Step 3. Now, click the Actions button, and select the Split tab.

Or, you can tap the clip (it becomes outlined in yellow), then swipe above the playhead as if you were placing your finger to slide over it.

Detach the Audio Part from a Video

You can detach the video clip’s audio to remove or edit it as a separate video clip.

Step 1. When the project is open in the timeline, select a video clip and display the inspector at the screen’s bottom.

Step 2. Tap the Actions button, then tap Detach.

Step 3. A new blue-colored audio clip will then appear below the video project. You can now move, edit, or delete the audio clip separately from its parent video clip.

Move Audio to the Foreground or Background

To ensure the sound in your video clips can listen above the background music, iMovie implies audio “ducking”. Ducking lowers the background music clips’ volume whenever there’s a video clip whose sound is playing simultaneously.

You can select which audio clips are in the foreground or the background.

Step 1. Select the timeline’s audio clip to display the inspector at the screen’s bottom.

Step 2. Hit the Actions tab and proceed with selecting the Foreground or Background.

The clip color changes to indicate whether it’s the background music (green) or foreground audio (blue or purple).

Part 2: An Easier Way to Edit Audio Clips

Windows users might be wandering for an alternative to iMovie as this software tool is only compatible with Mac and iOS devices. You will be thrilled to know that Wondershare Filmora can serve you with all synonymous and extra features more than the iMovie, and it works significantly in the Windows environment.

This latest software tool also assists users with easy video editing tricks and the intuitive interface that best serves quality editing to beginners and professionals.

Despite the basic video editing features, such as trimming, splitting, merging, cutting, and cropping, Filmora also offers various advanced editing elements that are far better than iMovie. And, with its video editing features, you can make a green screen effect, stabilize your video footage, reverse your video clip, and more.

Moreover, you can enjoy royalty-free music tracks for different themes, such as Young and Bright, Tender and Sentimental, Rock, Folk, Electronic Rock, and Hipster Folk, for selection.

All this will be available with a single program called Wondershare Filmora to take advantage of them for free. You do not have to search the background music files like a needle in a haystack. The program has nicely organized the music themes into six different folders. You can apply it for your video and make advanced editing, such as split/trim the clip, adjust the playback speed, pitch, volume, etc.

How to Edit Audio with Wondershare Filmora?

In Wondershare Filmora, you can insert background music and other files from the audio library or your computer. You can even record your voiceover using it.

Add Background Music

Filmora provides a royalty-free music library you can access or import your music within the program. You can select a song from the royalty-free audio library and use it for free.

The audio library has categorized into: YOUNG & BRIGHT, TENDER & SENTIMENTAL, ROCK, FOLK, and ELECTRONIC. The different kinds of sound effects are also available under the Sound Effects tab.

Once you find a sound effect or a song, either right-click on it and go with the Apply or drag and drop it into an audio track in the timeline.

Or, you can click the Import button above the Media Library panel to browse for audio files in your PC system. Then, select and import it into the Media Library when you find the song or other audio files you wish to add.

Once you place the song in the timeline, double-click to edit it in the Audio editing panel. You can apply fade-in or fade-out effects or adjust the pitch and volume. Filmora lets you add up to 100 audio tracks.

Split Audio Clips

Choose your audio clip and place the playhead where you want to split it, then right-click on the clip and choose the Split tab or click the Split icon right above on the toolbar.

Adjust Audio Settings

Double click on the audio clip to make adjustments to your audio. Open a panel with adjustment sliders in the timeline for pitch and volume.

Another element that you’ll find in this panel is Denoise, which is a feature that can remove background noise from your audio clips.

For a more professional audio editing experience, you can also access the Audio Equalizer from this panel. Select from presets or make manual adjustments by hitting the Customize tab.

Play it when you are done and, if you’re not happy with the results, tap the Reset button to start over.

Audio Equalizer (EQ)

All videos have plenty of sounds like speech, music, or sound effects. Changing the strength of sound waves will help you to mix these sounds within a coherent soundtrack.

Locate your audio clip in an audio track and double-click on it to open the Audio settings menu window. A drop-down menu next to the Equalizer feature will display presets such as Classic, Default, Rock’n’Roll, Techno, Sparkle, Bass, Hard Rock, Pop, Ska, Blues, Folk, Acoustic, Custom, or Country. Choose the preset that best fits your current needs and hit the OK tab to apply it.

Now, hit the Customize tab next to the drop-down bar to adjust the Audio Equalizer manually. Drag the sliders up or down and make the adjustments until you find their ideal value. Finally, hit OK and save your settings.

Besides the included music tracks and sound effects in Filmora initially, you can also find more audio files from Filmora’s effects store – Filmstock, and even get some free music and sound.

Part 3: iMovie Audio Editing Tips & Tricks

iMovie is a great video editor for Mac computers. After understanding the best alternative of iMovie sound editin g, let’s check out some tips on editing audio in iMovie best.

The explanations and screenshots below are for iMovie 10 only. However, the steps are a bit similar to older versions.

So, here we go!

1. Use Waveforms to See What You Hear

To properly edit the audio track in iMovie, you need a good pair of headphones and speakers to hear the sound, but you also need to check the sound.

You can check the sound in iMovie by considering the waveforms on each clip. If the waveforms can’t be seen, go to the View drop-down menu and choose the Show Waveforms option. The clip size for your project can also adjust to get an even better appearance for each video clip.

The waveforms will display the volume level of a clip and give you a good idea of what sections will require to turn up or down. You can also check how the levels of different clips compare to one another.

2. Audio Adjustments

With the help of Adjust tab in the top right, you can access some basic audio editing tools for changing your selected clip’s volume or changing the volume of other relative clips in the project.

The adjustment window of audio also provides basic audio equalization and noise reduction tools, along with a range of effects - from echo to robot - that will change the way people in your video sound.

3. Edit Audio with the Timeline

iMovie assists you in adjusting the audio within the clips themselves. Each pin has a volume bar, moving up and down to decrease or increase the audio level. The clips also contain Fade In and Fade Out tabs at the beginning and end, dragging to adjust the fade’s length.

By adding a short fade effect, whether in or out, the sound becomes relatively smoother and less conflicting to the ear when a new clip begins.

4. Detach the Audio

By default, iMovie keeps the video and audio sections of clips together for convenience. Yet, you want to use the video and audio sections of a clip separately sometimes.

For this purpose, choose your clip in the timeline, visit the Modify drop-down menu, and hit the Detach Audio button. You’ll now have two clips - one with the images and another with the sound.

A lot you can do with the detached audio. For instance, you could extend the audio clip to begin before the video plays, or so that it plays for a few seconds even after the video fades out. You could also cut out pieces from the audio’s middle portion while leaving the video intact.

Conclusion

Coming towards the end of the discussion, after understanding iMovie audio editingand going through an elaborated alternative of iMovie application, we decided that Wondershare Filmora sounds the best out of it. It allows you to flawlessly edit video and audio files on your desktop, with various inbuilt royalty-free music tracks to select from that can further improve your project’s presence.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Oct 26, 2023• Proven solutions

iMovie offers a fantastic platform for video editing where you can merge multiple video clips to create something very phenomenal. Plus, it’s simply here to navigate between different scenes, edit video clips and save results directly to the digital format without making any videotape transformations.

It provides lots of things to beginners and professionals with its easy-to-use interface without any quality loss for your results even after adding lots of transitions, changes, and effects.

However, it is not accessible to master software, precisely when you’re not familiar with it, or you’re not its professional user. So today, we’d like to explore or pay attention to iMovie’s audio editing steps, tips, and tricks to help you become an iMovie master quickly.

What’s more, a practical yet professional iMovie alternative software is also advisable in this guide. So when the iMovie cannot fulfil your editing requirements, why don’t you hop on an iMovie alternative software?

Now, let’s get started!

Part 1: How to Edit Audio Clips in iMovie?

To learn how to edit audio clips in iMovie, you can use actions in the menu along with the quick shortcuts to make adjustments to your audio clips in iMovie on Mac. It’s a tip for your convenience!

Trim Audio Clips

There are a couple of options to trim an audio clip in iMovie.

#1. Trim to Playhead

You can place the playhead in your timeline. Now, trim an audio clip to that exact spot. Next, start moving the playhead and do one from the following.

• Select Modify > Trim to Playhead option in the menu bar.
• Right-click the audio clip and select the option of Trim to Playhead in the shortcut menu.

#2. Use the Clip Trimmer

You can use the Clip Trimmer to trim an exact section of the clip.

Step 1. Right-click the audio clip and select Show Clip Trimmer in the shortcut menu.

Step 2. After the Clip Trimmer shows, select a section you wish to trim by dragging the arrows right and left while holding the white lines. The area within those lines is what will get entirely deleted.

Move the entire clip but keep the trim area in place if arrows turn to a film strip icon.

Step 3. Click Close Clip Trimmer after you finish this section.

Shorten or Lengthen Audio Clips

You can easily shorten or lengthen an audio clip in iMovie. Just choose the pin in the timeline and drag one of its edges. The duration of the clip change will change as you carry. And a new course will be displayed after you finish in the upper left menu.

You can also set the clip’s duration to an exact time. Select the clip in the timeline and hit the Clip Information (small letter “i”) tab located above the Viewer. Put the value of the time you want in seconds in the Duration box on the right.

Change the Speed of an Audio Clip

You may want to speed up or slow down an audio clip while editing music in iMovie. So, here’s what you need to do!

Method 1. Click the Speed button above the Viewer. Next, select Custom in the Speed drop-down box and enter a percentage next to it. You can also set a different speed in that box if you prefer.

Method 2. Right-click the clip and select Show Speed Editor from the shortcut menu. A slider will then display at the top of the clip that you can move to change the speed.

Adjust the Volume of an Audio Clip

You can set the audio clip’s volume at higher or lower, or even mute it. Just select the clip and then do one of the following.

• Select the Volume tab above the Viewer option and move the slider to the percentage of volume. Hit the Mute button to mute the audio clip.
• Tap inside the clip, and when the two-sided arrow appears, drag up or down to adjust the volume.

Fade an Audio Clip

While editing audio in iMovie, you can also fade in or out the clip. Choose a clip in the timeline and then drag the fade handle (small circle) at either the ending or the beginning of the clip to make a fade-out or a fade-in effect.

As you drag, you will see the arcs displaying the shadow for the clips fade in or fade out.

How to Edit Audio Clips in iMovie on iOS?

The iMovie timeline is where you sort or organize all your audio clips, such as the special effects and background music. Audio clips are always present below the video clips in the timeline. To edit audio clips in iMovie on your iPhones or iPads, you can follow the guide belo

Move an Audio Clip

You can transfer the whole audio clip, except the background music, to another location.

• Touch and hold the purple or blue audio clip with your project open in the timeline until it comes over the timeline bar.
• Drag the clip to another place and release.

Adjust the Audio Clip’s Duration

Step 1. While the project is launched in the timeline, tap the audio clip (in blue or purple) or the background music clip you wish to adjust.

Step 2. Now, you can see the display of yellow trim handles. Drag them either at the end of the clip to the points where you wish the audio to start and end. If a trim handle won’t move left or right, it simply indicates there is no additional audio to work with on that clip’s end.

Step 3. Tap outside the audio clip and let the trim handles disappear.

Split an Audio Clip

There are around two options to split audio clips in iMovie. You can remove unwanted parts or adjust each section’s duration, volume, or speed while you split a clip.

Step 1. With your launched project in the timeline, scroll the timeline to the playhead’s position where you want to split the audio.

Step 2. Click the audio clip to display the inspector at the screen’s bottom.

Step 3. Now, click the Actions button, and select the Split tab.

Or, you can tap the clip (it becomes outlined in yellow), then swipe above the playhead as if you were placing your finger to slide over it.

Detach the Audio Part from a Video

You can detach the video clip’s audio to remove or edit it as a separate video clip.

Step 1. When the project is open in the timeline, select a video clip and display the inspector at the screen’s bottom.

Step 2. Tap the Actions button, then tap Detach.

Step 3. A new blue-colored audio clip will then appear below the video project. You can now move, edit, or delete the audio clip separately from its parent video clip.

Move Audio to the Foreground or Background

To ensure the sound in your video clips can listen above the background music, iMovie implies audio “ducking”. Ducking lowers the background music clips’ volume whenever there’s a video clip whose sound is playing simultaneously.

You can select which audio clips are in the foreground or the background.

Step 1. Select the timeline’s audio clip to display the inspector at the screen’s bottom.

Step 2. Hit the Actions tab and proceed with selecting the Foreground or Background.

The clip color changes to indicate whether it’s the background music (green) or foreground audio (blue or purple).

Part 2: An Easier Way to Edit Audio Clips

Windows users might be wandering for an alternative to iMovie as this software tool is only compatible with Mac and iOS devices. You will be thrilled to know that Wondershare Filmora can serve you with all synonymous and extra features more than the iMovie, and it works significantly in the Windows environment.

This latest software tool also assists users with easy video editing tricks and the intuitive interface that best serves quality editing to beginners and professionals.

Despite the basic video editing features, such as trimming, splitting, merging, cutting, and cropping, Filmora also offers various advanced editing elements that are far better than iMovie. And, with its video editing features, you can make a green screen effect, stabilize your video footage, reverse your video clip, and more.

Moreover, you can enjoy royalty-free music tracks for different themes, such as Young and Bright, Tender and Sentimental, Rock, Folk, Electronic Rock, and Hipster Folk, for selection.

All this will be available with a single program called Wondershare Filmora to take advantage of them for free. You do not have to search the background music files like a needle in a haystack. The program has nicely organized the music themes into six different folders. You can apply it for your video and make advanced editing, such as split/trim the clip, adjust the playback speed, pitch, volume, etc.

How to Edit Audio with Wondershare Filmora?

In Wondershare Filmora, you can insert background music and other files from the audio library or your computer. You can even record your voiceover using it.

Add Background Music

Filmora provides a royalty-free music library you can access or import your music within the program. You can select a song from the royalty-free audio library and use it for free.

The audio library has categorized into: YOUNG & BRIGHT, TENDER & SENTIMENTAL, ROCK, FOLK, and ELECTRONIC. The different kinds of sound effects are also available under the Sound Effects tab.

Once you find a sound effect or a song, either right-click on it and go with the Apply or drag and drop it into an audio track in the timeline.

Or, you can click the Import button above the Media Library panel to browse for audio files in your PC system. Then, select and import it into the Media Library when you find the song or other audio files you wish to add.

Once you place the song in the timeline, double-click to edit it in the Audio editing panel. You can apply fade-in or fade-out effects or adjust the pitch and volume. Filmora lets you add up to 100 audio tracks.

Split Audio Clips

Choose your audio clip and place the playhead where you want to split it, then right-click on the clip and choose the Split tab or click the Split icon right above on the toolbar.

Adjust Audio Settings

Double click on the audio clip to make adjustments to your audio. Open a panel with adjustment sliders in the timeline for pitch and volume.

Another element that you’ll find in this panel is Denoise, which is a feature that can remove background noise from your audio clips.

For a more professional audio editing experience, you can also access the Audio Equalizer from this panel. Select from presets or make manual adjustments by hitting the Customize tab.

Play it when you are done and, if you’re not happy with the results, tap the Reset button to start over.

Audio Equalizer (EQ)

All videos have plenty of sounds like speech, music, or sound effects. Changing the strength of sound waves will help you to mix these sounds within a coherent soundtrack.

Locate your audio clip in an audio track and double-click on it to open the Audio settings menu window. A drop-down menu next to the Equalizer feature will display presets such as Classic, Default, Rock’n’Roll, Techno, Sparkle, Bass, Hard Rock, Pop, Ska, Blues, Folk, Acoustic, Custom, or Country. Choose the preset that best fits your current needs and hit the OK tab to apply it.

Now, hit the Customize tab next to the drop-down bar to adjust the Audio Equalizer manually. Drag the sliders up or down and make the adjustments until you find their ideal value. Finally, hit OK and save your settings.

Besides the included music tracks and sound effects in Filmora initially, you can also find more audio files from Filmora’s effects store – Filmstock, and even get some free music and sound.

Part 3: iMovie Audio Editing Tips & Tricks

iMovie is a great video editor for Mac computers. After understanding the best alternative of iMovie sound editin g, let’s check out some tips on editing audio in iMovie best.

The explanations and screenshots below are for iMovie 10 only. However, the steps are a bit similar to older versions.

So, here we go!

1. Use Waveforms to See What You Hear

To properly edit the audio track in iMovie, you need a good pair of headphones and speakers to hear the sound, but you also need to check the sound.

You can check the sound in iMovie by considering the waveforms on each clip. If the waveforms can’t be seen, go to the View drop-down menu and choose the Show Waveforms option. The clip size for your project can also adjust to get an even better appearance for each video clip.

The waveforms will display the volume level of a clip and give you a good idea of what sections will require to turn up or down. You can also check how the levels of different clips compare to one another.

2. Audio Adjustments

With the help of Adjust tab in the top right, you can access some basic audio editing tools for changing your selected clip’s volume or changing the volume of other relative clips in the project.

The adjustment window of audio also provides basic audio equalization and noise reduction tools, along with a range of effects - from echo to robot - that will change the way people in your video sound.

3. Edit Audio with the Timeline

iMovie assists you in adjusting the audio within the clips themselves. Each pin has a volume bar, moving up and down to decrease or increase the audio level. The clips also contain Fade In and Fade Out tabs at the beginning and end, dragging to adjust the fade’s length.

By adding a short fade effect, whether in or out, the sound becomes relatively smoother and less conflicting to the ear when a new clip begins.

4. Detach the Audio

By default, iMovie keeps the video and audio sections of clips together for convenience. Yet, you want to use the video and audio sections of a clip separately sometimes.

For this purpose, choose your clip in the timeline, visit the Modify drop-down menu, and hit the Detach Audio button. You’ll now have two clips - one with the images and another with the sound.

A lot you can do with the detached audio. For instance, you could extend the audio clip to begin before the video plays, or so that it plays for a few seconds even after the video fades out. You could also cut out pieces from the audio’s middle portion while leaving the video intact.

Conclusion

Coming towards the end of the discussion, after understanding iMovie audio editingand going through an elaborated alternative of iMovie application, we decided that Wondershare Filmora sounds the best out of it. It allows you to flawlessly edit video and audio files on your desktop, with various inbuilt royalty-free music tracks to select from that can further improve your project’s presence.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Also read: