Normalizing Volume in VLC: A Step-by-Step Guide

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

The Future of Linux Audio Editing Unveiled: Best Tools for the Year 2024

Are you a professional audio editor? Or do you just like to create incredible music for fun? In any case, there is something that you must have. Well, no surprise, it’s an Audio Editor. The market is packed with some brilliant audio editors supporting different systems like Windows, Linux, Mac, etc.

Can you name a great Linux audio editor if you are a Linux user? In case you don’t have the answer to this question, we can share something with you. The article understudy will shed light on 6 top audio editing software Linux, so let’s make a start. You won’t be disappointed with the results.

Part 1. 6 Best Linux Audio Editor [Free & Paid]

The market is full of good audio editors; the only difference is that some are free, whereas some are paid. If you are interested in learning about the best and most popular Linux MP3 editors, then let’s get started in no particular order.

1. Ardour

Are you ready to learn about a Linux music editor that has multichannel tracks? We are talking about Ardour editor, the software that supports importing and exporting different file formats. This music editor offers features like automation, flexible recording, etc. Do you know you can also extract sound from videos by using Ardour on Linux? Isn’t this great?

Key Features

• What is the coolest thing about Ardour? The software is extensible because of the plug-ins like LV2, LADSPA, LinuxVST, etc., and In-line plug-in controls.
• The editor not only supports audio but also supports MIDI editing as well as recording. It offers non-linear editing along with non-destructive recording.
• With Ardour, complex signal flows are made simple and elegant because of the interface. Moreover, you can easily connect output and input devices to hardware.

2. Audacity

What’s next? Its Audacity Linux MP3 editor! This editor is a free, cross-platform, and open-source that works perfectly with Linux. The song editor supports a large number of keyboard shortcuts, and in addition to that, the keyboard can fully manipulate tracks and selections. Basic Features like Cut, Delete, Copy and Paste are offered by Audacity audio editor. There is nothing better than Audacity.

Key Features

• Audacity offers Spectrogram View Mode and Spectrogram Window for visualizing and selecting frequencies and also for detailed frequency analysis.
• Do you know the best part about Audacity? It promises to deliver high-quality sounds like 16-bit, 24-bit, and also 32-bit.
• What else can Audacity offer? This Linux music editor supports a long list of plugins that include; LV2, LADSPA, Audio Unit Effects, VST, and Nyquist.

3. Rosegarden

Rosegarden is the next Linux sound editor in the line to be discussed. Have you ever heard about it before? If not, then let’s tell you. The editor comes with cool features like track mixing, notation editing, recording, and some basic digital audio features are also supported. The best part about Rosegarden is that everyone can easily learn to use this editor. Impressed by this, right?

Key Features

• This song editor is open source and free to use. Moreover, it has neither basic editing tools nor a fully-featured DAW; it stands somewhere in between.
• Rosegarden is an internationally used editor; hence, it extends support to many languages, including French, Swedish, German, Czech, Russian, and others.
• This editor provides various intuitive ways to edit and record. Along with this, features like mixing, using effects and samples, etc., are also offered.

4. Reaper

Can you name a Linux audio editor that supports modification and customization? Its Reaper editor. This audio editor allows MIDI recording, mixing, processing, editing, mastering, and whatnot. Above all, the editor is multitrack. Reaper has a simple and understandable interface that everyone can work with. This powerful audio editor is created by Cockos, and it is cross-platform. Want to know more about it? Go through the following features marked below:

Key Features

• Can you identify the level of ease offered by Reaper? Well, this editor is as easy as dragging and dropping. For importing, rendering, and also arranging, just drag and drop things.
• This audio editor is fully customizable. It lets you switch between the different layouts as per your task requirement.
• With Reaper, you get hundreds of studio-quality effects. Along with this, various plugin effects are also supported like VST, LV2, AU, DX, etc.

5. LMMS

Let’s tell you about an audio editor made by musicians and made for musicians. For creating incredible music, LMMS is a great Linux song editor. Do you know why? This is because the list of features offered by the editor is unmatched. This cross-platform, open-source editor is widely used because of its modern, captivating, and intuitive interface. It surely is the best.

Key Features

• Do you want to know something nice about LMMS? This editor offers a collection of instruments, effect plugins and also supports VST and SoundFont.
• LMMS has a simple interface, yet heavy features are provided. For instance, sequencing, mixing, composing, and also automating songs with LMMS.
• This editor easily imports MIDI files and also Hydrogen project files. Things like tune patterns, chords, melodies, notes, etc., can be edited with Piano Roll Editor.

6. Ocenaudio

The discussion will come to an end after talking about the Ocenaudio Linux MP3 editor. Do you know that this is the best MP3 editor for Linux? The reason for this is that Ocenaudio is the fastest editor as well as recorder for Linux. Aren’t you surprised?

This audio editor provides trouble-free editing of the tracks. Ocenaudio editor is based on the Ocen Framework. Do you know the best part about using this Linux music editor? You can use this editor without any limits and can edit as many files as you want. Sounds perfect!

Key Features

• The fascinating thing about this editor is that it leaves the screen for editing. Whereas other tasks like adding effects, exporting tracks, etc., are done in the background.
• Do you know anything interesting about this editor? Well, it’s cross-platform, and interestingly, it handles and efficiently edits large files.
• Ocenaudio is the best editor for both beginners and professionals. It supports advanced features like spectrogram, VST, multi-select mode, and much more.

Bottom Line

For all Linux users and music lovers, this article has everything you need to know. We talked about the 6 best and most widely used Linux music editors along with their fascinating features. If any video editor is reading the article, we do have something for you too. Have you ever heard about Wondershare Filmora ? It’s the best video editor you will ever come across for Windows and Mac.

The video editor offers Basic Features like Cut, Trim, Split, Merge, and others. What about Advanced Features? Well, Wondershare Filmora is packed with incredibly powerful tools and functions. For instance, try its AI Portrait feature, Auto Highlight, Auto Reframe, Normalization, Stabilize Video, and much more. Along with this, you can also get hands-on editing elements.

Do you know what elements we are talking about? With Filmora, you get cool video effects, amazing sound effects, different title templates, and transitions. Wondershare Filmora Video Editor is an all-in-one editing software.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

2. Audacity

What’s next? Its Audacity Linux MP3 editor! This editor is a free, cross-platform, and open-source that works perfectly with Linux. The song editor supports a large number of keyboard shortcuts, and in addition to that, the keyboard can fully manipulate tracks and selections. Basic Features like Cut, Delete, Copy and Paste are offered by Audacity audio editor. There is nothing better than Audacity.

Key Features

• Audacity offers Spectrogram View Mode and Spectrogram Window for visualizing and selecting frequencies and also for detailed frequency analysis.
• Do you know the best part about Audacity? It promises to deliver high-quality sounds like 16-bit, 24-bit, and also 32-bit.
• What else can Audacity offer? This Linux music editor supports a long list of plugins that include; LV2, LADSPA, Audio Unit Effects, VST, and Nyquist.

3. Rosegarden

Rosegarden is the next Linux sound editor in the line to be discussed. Have you ever heard about it before? If not, then let’s tell you. The editor comes with cool features like track mixing, notation editing, recording, and some basic digital audio features are also supported. The best part about Rosegarden is that everyone can easily learn to use this editor. Impressed by this, right?

Key Features

• This song editor is open source and free to use. Moreover, it has neither basic editing tools nor a fully-featured DAW; it stands somewhere in between.
• Rosegarden is an internationally used editor; hence, it extends support to many languages, including French, Swedish, German, Czech, Russian, and others.
• This editor provides various intuitive ways to edit and record. Along with this, features like mixing, using effects and samples, etc., are also offered.

4. Reaper

Can you name a Linux audio editor that supports modification and customization? Its Reaper editor. This audio editor allows MIDI recording, mixing, processing, editing, mastering, and whatnot. Above all, the editor is multitrack. Reaper has a simple and understandable interface that everyone can work with. This powerful audio editor is created by Cockos, and it is cross-platform. Want to know more about it? Go through the following features marked below:

Key Features

• Can you identify the level of ease offered by Reaper? Well, this editor is as easy as dragging and dropping. For importing, rendering, and also arranging, just drag and drop things.
• This audio editor is fully customizable. It lets you switch between the different layouts as per your task requirement.
• With Reaper, you get hundreds of studio-quality effects. Along with this, various plugin effects are also supported like VST, LV2, AU, DX, etc.

5. LMMS

Let’s tell you about an audio editor made by musicians and made for musicians. For creating incredible music, LMMS is a great Linux song editor. Do you know why? This is because the list of features offered by the editor is unmatched. This cross-platform, open-source editor is widely used because of its modern, captivating, and intuitive interface. It surely is the best.

Key Features

• Do you want to know something nice about LMMS? This editor offers a collection of instruments, effect plugins and also supports VST and SoundFont.
• LMMS has a simple interface, yet heavy features are provided. For instance, sequencing, mixing, composing, and also automating songs with LMMS.
• This editor easily imports MIDI files and also Hydrogen project files. Things like tune patterns, chords, melodies, notes, etc., can be edited with Piano Roll Editor.

6. Ocenaudio

The discussion will come to an end after talking about the Ocenaudio Linux MP3 editor. Do you know that this is the best MP3 editor for Linux? The reason for this is that Ocenaudio is the fastest editor as well as recorder for Linux. Aren’t you surprised?

This audio editor provides trouble-free editing of the tracks. Ocenaudio editor is based on the Ocen Framework. Do you know the best part about using this Linux music editor? You can use this editor without any limits and can edit as many files as you want. Sounds perfect!

Key Features

• The fascinating thing about this editor is that it leaves the screen for editing. Whereas other tasks like adding effects, exporting tracks, etc., are done in the background.
• Do you know anything interesting about this editor? Well, it’s cross-platform, and interestingly, it handles and efficiently edits large files.
• Ocenaudio is the best editor for both beginners and professionals. It supports advanced features like spectrogram, VST, multi-select mode, and much more.

Bottom Line

For all Linux users and music lovers, this article has everything you need to know. We talked about the 6 best and most widely used Linux music editors along with their fascinating features. If any video editor is reading the article, we do have something for you too. Have you ever heard about Wondershare Filmora ? It’s the best video editor you will ever come across for Windows and Mac.

The video editor offers Basic Features like Cut, Trim, Split, Merge, and others. What about Advanced Features? Well, Wondershare Filmora is packed with incredibly powerful tools and functions. For instance, try its AI Portrait feature, Auto Highlight, Auto Reframe, Normalization, Stabilize Video, and much more. Along with this, you can also get hands-on editing elements.

Do you know what elements we are talking about? With Filmora, you get cool video effects, amazing sound effects, different title templates, and transitions. Wondershare Filmora Video Editor is an all-in-one editing software.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

2. Audacity

What’s next? Its Audacity Linux MP3 editor! This editor is a free, cross-platform, and open-source that works perfectly with Linux. The song editor supports a large number of keyboard shortcuts, and in addition to that, the keyboard can fully manipulate tracks and selections. Basic Features like Cut, Delete, Copy and Paste are offered by Audacity audio editor. There is nothing better than Audacity.

Key Features

• Audacity offers Spectrogram View Mode and Spectrogram Window for visualizing and selecting frequencies and also for detailed frequency analysis.
• Do you know the best part about Audacity? It promises to deliver high-quality sounds like 16-bit, 24-bit, and also 32-bit.
• What else can Audacity offer? This Linux music editor supports a long list of plugins that include; LV2, LADSPA, Audio Unit Effects, VST, and Nyquist.

3. Rosegarden

Rosegarden is the next Linux sound editor in the line to be discussed. Have you ever heard about it before? If not, then let’s tell you. The editor comes with cool features like track mixing, notation editing, recording, and some basic digital audio features are also supported. The best part about Rosegarden is that everyone can easily learn to use this editor. Impressed by this, right?

Key Features

• This song editor is open source and free to use. Moreover, it has neither basic editing tools nor a fully-featured DAW; it stands somewhere in between.
• Rosegarden is an internationally used editor; hence, it extends support to many languages, including French, Swedish, German, Czech, Russian, and others.
• This editor provides various intuitive ways to edit and record. Along with this, features like mixing, using effects and samples, etc., are also offered.

4. Reaper

Can you name a Linux audio editor that supports modification and customization? Its Reaper editor. This audio editor allows MIDI recording, mixing, processing, editing, mastering, and whatnot. Above all, the editor is multitrack. Reaper has a simple and understandable interface that everyone can work with. This powerful audio editor is created by Cockos, and it is cross-platform. Want to know more about it? Go through the following features marked below:

Key Features

• Can you identify the level of ease offered by Reaper? Well, this editor is as easy as dragging and dropping. For importing, rendering, and also arranging, just drag and drop things.
• This audio editor is fully customizable. It lets you switch between the different layouts as per your task requirement.
• With Reaper, you get hundreds of studio-quality effects. Along with this, various plugin effects are also supported like VST, LV2, AU, DX, etc.

5. LMMS

Let’s tell you about an audio editor made by musicians and made for musicians. For creating incredible music, LMMS is a great Linux song editor. Do you know why? This is because the list of features offered by the editor is unmatched. This cross-platform, open-source editor is widely used because of its modern, captivating, and intuitive interface. It surely is the best.

Key Features

• Do you want to know something nice about LMMS? This editor offers a collection of instruments, effect plugins and also supports VST and SoundFont.
• LMMS has a simple interface, yet heavy features are provided. For instance, sequencing, mixing, composing, and also automating songs with LMMS.
• This editor easily imports MIDI files and also Hydrogen project files. Things like tune patterns, chords, melodies, notes, etc., can be edited with Piano Roll Editor.

6. Ocenaudio

The discussion will come to an end after talking about the Ocenaudio Linux MP3 editor. Do you know that this is the best MP3 editor for Linux? The reason for this is that Ocenaudio is the fastest editor as well as recorder for Linux. Aren’t you surprised?

This audio editor provides trouble-free editing of the tracks. Ocenaudio editor is based on the Ocen Framework. Do you know the best part about using this Linux music editor? You can use this editor without any limits and can edit as many files as you want. Sounds perfect!

Key Features

• The fascinating thing about this editor is that it leaves the screen for editing. Whereas other tasks like adding effects, exporting tracks, etc., are done in the background.
• Do you know anything interesting about this editor? Well, it’s cross-platform, and interestingly, it handles and efficiently edits large files.
• Ocenaudio is the best editor for both beginners and professionals. It supports advanced features like spectrogram, VST, multi-select mode, and much more.

Bottom Line

For all Linux users and music lovers, this article has everything you need to know. We talked about the 6 best and most widely used Linux music editors along with their fascinating features. If any video editor is reading the article, we do have something for you too. Have you ever heard about Wondershare Filmora ? It’s the best video editor you will ever come across for Windows and Mac.

The video editor offers Basic Features like Cut, Trim, Split, Merge, and others. What about Advanced Features? Well, Wondershare Filmora is packed with incredibly powerful tools and functions. For instance, try its AI Portrait feature, Auto Highlight, Auto Reframe, Normalization, Stabilize Video, and much more. Along with this, you can also get hands-on editing elements.

Do you know what elements we are talking about? With Filmora, you get cool video effects, amazing sound effects, different title templates, and transitions. Wondershare Filmora Video Editor is an all-in-one editing software.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

2. Audacity

What’s next? Its Audacity Linux MP3 editor! This editor is a free, cross-platform, and open-source that works perfectly with Linux. The song editor supports a large number of keyboard shortcuts, and in addition to that, the keyboard can fully manipulate tracks and selections. Basic Features like Cut, Delete, Copy and Paste are offered by Audacity audio editor. There is nothing better than Audacity.

Key Features

• Audacity offers Spectrogram View Mode and Spectrogram Window for visualizing and selecting frequencies and also for detailed frequency analysis.
• Do you know the best part about Audacity? It promises to deliver high-quality sounds like 16-bit, 24-bit, and also 32-bit.
• What else can Audacity offer? This Linux music editor supports a long list of plugins that include; LV2, LADSPA, Audio Unit Effects, VST, and Nyquist.

3. Rosegarden

Rosegarden is the next Linux sound editor in the line to be discussed. Have you ever heard about it before? If not, then let’s tell you. The editor comes with cool features like track mixing, notation editing, recording, and some basic digital audio features are also supported. The best part about Rosegarden is that everyone can easily learn to use this editor. Impressed by this, right?

Key Features

• This song editor is open source and free to use. Moreover, it has neither basic editing tools nor a fully-featured DAW; it stands somewhere in between.
• Rosegarden is an internationally used editor; hence, it extends support to many languages, including French, Swedish, German, Czech, Russian, and others.
• This editor provides various intuitive ways to edit and record. Along with this, features like mixing, using effects and samples, etc., are also offered.

4. Reaper

Can you name a Linux audio editor that supports modification and customization? Its Reaper editor. This audio editor allows MIDI recording, mixing, processing, editing, mastering, and whatnot. Above all, the editor is multitrack. Reaper has a simple and understandable interface that everyone can work with. This powerful audio editor is created by Cockos, and it is cross-platform. Want to know more about it? Go through the following features marked below:

Key Features

• Can you identify the level of ease offered by Reaper? Well, this editor is as easy as dragging and dropping. For importing, rendering, and also arranging, just drag and drop things.
• This audio editor is fully customizable. It lets you switch between the different layouts as per your task requirement.
• With Reaper, you get hundreds of studio-quality effects. Along with this, various plugin effects are also supported like VST, LV2, AU, DX, etc.

5. LMMS

Let’s tell you about an audio editor made by musicians and made for musicians. For creating incredible music, LMMS is a great Linux song editor. Do you know why? This is because the list of features offered by the editor is unmatched. This cross-platform, open-source editor is widely used because of its modern, captivating, and intuitive interface. It surely is the best.

Key Features

• Do you want to know something nice about LMMS? This editor offers a collection of instruments, effect plugins and also supports VST and SoundFont.
• LMMS has a simple interface, yet heavy features are provided. For instance, sequencing, mixing, composing, and also automating songs with LMMS.
• This editor easily imports MIDI files and also Hydrogen project files. Things like tune patterns, chords, melodies, notes, etc., can be edited with Piano Roll Editor.

6. Ocenaudio

The discussion will come to an end after talking about the Ocenaudio Linux MP3 editor. Do you know that this is the best MP3 editor for Linux? The reason for this is that Ocenaudio is the fastest editor as well as recorder for Linux. Aren’t you surprised?

This audio editor provides trouble-free editing of the tracks. Ocenaudio editor is based on the Ocen Framework. Do you know the best part about using this Linux music editor? You can use this editor without any limits and can edit as many files as you want. Sounds perfect!

Key Features

• The fascinating thing about this editor is that it leaves the screen for editing. Whereas other tasks like adding effects, exporting tracks, etc., are done in the background.
• Do you know anything interesting about this editor? Well, it’s cross-platform, and interestingly, it handles and efficiently edits large files.
• Ocenaudio is the best editor for both beginners and professionals. It supports advanced features like spectrogram, VST, multi-select mode, and much more.

Bottom Line

For all Linux users and music lovers, this article has everything you need to know. We talked about the 6 best and most widely used Linux music editors along with their fascinating features. If any video editor is reading the article, we do have something for you too. Have you ever heard about Wondershare Filmora ? It’s the best video editor you will ever come across for Windows and Mac.

The video editor offers Basic Features like Cut, Trim, Split, Merge, and others. What about Advanced Features? Well, Wondershare Filmora is packed with incredibly powerful tools and functions. For instance, try its AI Portrait feature, Auto Highlight, Auto Reframe, Normalization, Stabilize Video, and much more. Along with this, you can also get hands-on editing elements.

Do you know what elements we are talking about? With Filmora, you get cool video effects, amazing sound effects, different title templates, and transitions. Wondershare Filmora Video Editor is an all-in-one editing software.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Digital Audio Trimmer and Merger Tool

Online Audio & Mp3 Cutter, Audio Trimmer is a simple online tool which lets you trim your audio files on the fly. Choose your file and click Upload to get started! Uploaded files are stored in a temporary folder and automatically removed from the server within two hours.

It always makes me exciting that we can cut MP3 files and merge several parts into one file using those mp3 cutter and joiner software. For example, nowadays most people use MP3 cutter software to cut the best part of a song as their ringtones or cut the best part of many different songs and merge them into one song. And here’s a list of best free 8 mp3 cutter and joiner software recommend for you. These let you cut pieces of audio from audio files easily. These free software offer various features, like cutting MP3 audio files, fade in and fade out, choosing start point and end point, create ringtones for mobile phones from audio files, create various sound clips for presentations, making of audio books, making of jokes etc

Filmora Audio Recorder

Record computer system audio

Capture microphone audio

Customize recording volume

Record screen and webcam as well

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Also read: