Echoes of Error: A Guide to Reestablishing Auditory Integrity Using Diverse Methods

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

The Ultimate Guide to Top Audio Extraction Tools in Videos

Imagine you have a video that is very close to your heart, but there is one problem with it. You couldn’t share the video with anyone because it has weird audio attached to it. What are you going to do if you face such scenarios? Are you going to throw away the video? If it is important to you, you will not discard it.

What else could be done? Do you want a good solution to this problem? We have something amazing for you. Various software are available in the market today that offer you this cool functionality. Allow us to introduce the 10 best software to you. You can easily detach audio from video and have it shared anywhere by using these.

Part 1. 10 Most Popular Software to Detach Audio from Video in 2024

Audio editing software holds the feature that can be used to detach audio from any of your videos. It is not necessary to use this type of software. You only need audio editing software if you plan to detach sound from video. Or else for some other easy work. In any case, the question is, what are the best audio editing tools to use? Let us share the 10 best software with you.

1. Wondershare Filmora

Filmora is a top-class video editor. The tool is very famous for the services and features it offers. You can fully edit a stunning video with Filmora. Do you know about its Audio Editor? Yes, along with video editing, Filmora also offers audio editing with numerous brilliant features.

You can completely transform audio after editing with this editor. Filmora allows you to ‘Split and Adjust’ your desired audio. Another cool thing that could be done with Filmora is ‘Speed and Pitch Adjustments.’ With Filmora audio editor, audio detach from the video is also possible. It has various other features, out of which the few of them are:

• A remarkable feature about Filmora audio editor is that it can be used as an Audio-Mixer.
• Sometimes the audio volume can be disturbing. You can use the ‘Adjust Audio Volume’ feature of Filmora to get things right.
• You might want to replace the video’s original audio with something else. Filmora lets you do this.
• If in case the original audio is not satisfying you, it can be removed. Use Filmora and detachaudio from video.
• With Filmora, users can use the fade in and fade out feature across their audio.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

2. Audacity

The next audio-related platform is Audacity. If you want to extract and detach audio from video, then Audacity is an amazing software for this. The software can be used to create unexpected songs. With the File Glue function, you can mix various elements and create melodious songs.

It also has a huge collection of sound effects. There are many more features of this audio extractor. Let us shed light on a few.

• The most significant feature of Audacity is that it can extract, mix and also copy music.
• The software extends support to multiple formats like MP3, WAV, FLAC, AIFF, etc.
• Audacity offers built-in effects for audio files.

3. Windows Movie Maker

Are you ready to talk about another software? Windows Movie Maker is yet another audio extractor known for its features and performance. Its amazing speed helps to detach sound from video quickly. The software was released by Microsoft.

The fact that it offers audio extraction for free is very crazy. Moreover, it’s a very easy process to do. Windows Movie Maker has a lot of other features that should be explored.

• Audio editing like trim, split, adjusting music volume, etc., can be done with Windows Movie Maker.
• The software allows you to add effects transitions and also extract audio from video.
• Share your audio files to Facebook, YouTube, and other social media platforms from this editor.

4. VLC Media Player

Have you ever heard about VLC before? You must have. This is very famous software. The media player offers a wide range of features. The software is compatible with all platforms, and you can play everything on it, which is why VLC is among the top-known software in the current market.

The software supports various video formats and expands its circle to a lot of other media files. Let us share its features so that you get to know more about VLC.

• As mentioned earlier, it supports multimedia files like DVDs, Audio CDs, and VCDs.
• The coolest thing with VLC is that you can adjust the audio codec and bit rate.
• With VLC, you can perform audio detach from videos.

5. Apowersoft Video Converter

The following software in the list to be discussed is Apowersoft Video Converter. The software is primarily a video converter, but it is also an Audio Extractor. The software has many distinct features because it holds a place in the market. Apowersoft can be used online as well as could be downloaded. The software is also known for its stunning Audio Editing tool. Let’s look at its other features.

• The software supports numerous file formats, including WMA, FLAC, MP3, etc.
• With Apowersoft Video Converter, you can detach audiofrom your video for free.
• Convert the audio format from Apowersoft to device-compatible format.

6. Wondershare UniConverter

Should we move to the next software? Well, it’s UniConverter. The software is quite easy to use. You can detach audio from videos with this extractor software. It works on videos despite the video format and quality. The user can simply convert their video into an audio format while sustaining the quality. It works like an audio extractor that allows users to give a purposeful use case with it. Want to know more about Wondershare UniConverter? Let’s share its features.

• Wondershare UniConverter promises to deliver final results with good quality.
• It supports various formats like FLAC, MP3, OGG, and more.
• It utilizes full GPU acceleration for high-speed conversion.

7. MiniTool MovieMaker

Who likes to see ads when they are working? Probably no one. MiniTool MovieMaker falls perfectly for this requirement. The movie maker tool is free to use. You don’t need any registration to use it. We all are worried about virus attacks on our computers, but MiniTool MovieMaker has no virus. The software has a very intuitive interface that makes it easy to use. Some more features of this software are:

• The software has impressive audio editing tools which help in audio detach
• Its format support expands over a wide range, including MOV, AVI, MP4, MPG, MKV, etc.
• With MiniTool MovieMaker, split, trim, and even combine your audio clips.

8. Ocenaudio

Another perfect software to detach audio from videos is Ocenaudio. The software offers full spectrogram settings. You can analyze your audio’s spectral content and edit audio tracks. Allow us to highlight some more Ocenaudio features.

• The software has an extensive collection of sound effects.
• Ocenaudio extracts audio from video files despite their length.
• The software promises not to damage the video file during extraction.

9. AOA Audio Extractor

Moving on to the next software, AOA Audio Extractor is a proficient audio extractor software. Users can work with any audio format to detach sound from videos. The audio extracting software is quite powerful. It supports audio conversion. Let us add its features to impress you.

• The software supports audio extraction from 5-minute videos.
• While extracting audio with this software, you can adjust the bit rate, frequency, quality, etc.
• In case you have saved the file in the wrong format, with AOA Audio Extractor, you can convert its format.

10. Free Audio Editor

Are you ready to discuss the last software? It is Free Audio Editor. Its name is self-explanatory. The software is for audio editing, and most importantly, it’s free. The best part about this software is that you can download videos from YouTube and then detach audio from video. Some more of its interesting features are added below.

• With this software, you can not only edit your audios but also record them.
• Free Audio Editor supports more than 25 audio formats.
• With its intuitive interface, you can easily cut, trim or copy.

Wrapping Up

Have you learned something from us? We indeed think you have. After reading the above article about 10 different software, all of you will easily detach audio from videos. The article has shared detailed information regarding different helping software for this task.

Versatile Video Editor - Wondershare Filmora

An easy and powerful editor

Numerous effects to choose from.

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

2. Audacity

The next audio-related platform is Audacity. If you want to extract and detach audio from video, then Audacity is an amazing software for this. The software can be used to create unexpected songs. With the File Glue function, you can mix various elements and create melodious songs.

It also has a huge collection of sound effects. There are many more features of this audio extractor. Let us shed light on a few.

• The most significant feature of Audacity is that it can extract, mix and also copy music.
• The software extends support to multiple formats like MP3, WAV, FLAC, AIFF, etc.
• Audacity offers built-in effects for audio files.

3. Windows Movie Maker

Are you ready to talk about another software? Windows Movie Maker is yet another audio extractor known for its features and performance. Its amazing speed helps to detach sound from video quickly. The software was released by Microsoft.

The fact that it offers audio extraction for free is very crazy. Moreover, it’s a very easy process to do. Windows Movie Maker has a lot of other features that should be explored.

• Audio editing like trim, split, adjusting music volume, etc., can be done with Windows Movie Maker.
• The software allows you to add effects transitions and also extract audio from video.
• Share your audio files to Facebook, YouTube, and other social media platforms from this editor.

4. VLC Media Player

Have you ever heard about VLC before? You must have. This is very famous software. The media player offers a wide range of features. The software is compatible with all platforms, and you can play everything on it, which is why VLC is among the top-known software in the current market.

The software supports various video formats and expands its circle to a lot of other media files. Let us share its features so that you get to know more about VLC.

• As mentioned earlier, it supports multimedia files like DVDs, Audio CDs, and VCDs.
• The coolest thing with VLC is that you can adjust the audio codec and bit rate.
• With VLC, you can perform audio detach from videos.

5. Apowersoft Video Converter

The following software in the list to be discussed is Apowersoft Video Converter. The software is primarily a video converter, but it is also an Audio Extractor. The software has many distinct features because it holds a place in the market. Apowersoft can be used online as well as could be downloaded. The software is also known for its stunning Audio Editing tool. Let’s look at its other features.

• The software supports numerous file formats, including WMA, FLAC, MP3, etc.
• With Apowersoft Video Converter, you can detach audiofrom your video for free.
• Convert the audio format from Apowersoft to device-compatible format.

6. Wondershare UniConverter

Should we move to the next software? Well, it’s UniConverter. The software is quite easy to use. You can detach audio from videos with this extractor software. It works on videos despite the video format and quality. The user can simply convert their video into an audio format while sustaining the quality. It works like an audio extractor that allows users to give a purposeful use case with it. Want to know more about Wondershare UniConverter? Let’s share its features.

• Wondershare UniConverter promises to deliver final results with good quality.
• It supports various formats like FLAC, MP3, OGG, and more.
• It utilizes full GPU acceleration for high-speed conversion.

7. MiniTool MovieMaker

Who likes to see ads when they are working? Probably no one. MiniTool MovieMaker falls perfectly for this requirement. The movie maker tool is free to use. You don’t need any registration to use it. We all are worried about virus attacks on our computers, but MiniTool MovieMaker has no virus. The software has a very intuitive interface that makes it easy to use. Some more features of this software are:

• The software has impressive audio editing tools which help in audio detach
• Its format support expands over a wide range, including MOV, AVI, MP4, MPG, MKV, etc.
• With MiniTool MovieMaker, split, trim, and even combine your audio clips.

8. Ocenaudio

Another perfect software to detach audio from videos is Ocenaudio. The software offers full spectrogram settings. You can analyze your audio’s spectral content and edit audio tracks. Allow us to highlight some more Ocenaudio features.

• The software has an extensive collection of sound effects.
• Ocenaudio extracts audio from video files despite their length.
• The software promises not to damage the video file during extraction.

9. AOA Audio Extractor

Moving on to the next software, AOA Audio Extractor is a proficient audio extractor software. Users can work with any audio format to detach sound from videos. The audio extracting software is quite powerful. It supports audio conversion. Let us add its features to impress you.

• The software supports audio extraction from 5-minute videos.
• While extracting audio with this software, you can adjust the bit rate, frequency, quality, etc.
• In case you have saved the file in the wrong format, with AOA Audio Extractor, you can convert its format.

10. Free Audio Editor

Are you ready to discuss the last software? It is Free Audio Editor. Its name is self-explanatory. The software is for audio editing, and most importantly, it’s free. The best part about this software is that you can download videos from YouTube and then detach audio from video. Some more of its interesting features are added below.

• With this software, you can not only edit your audios but also record them.
• Free Audio Editor supports more than 25 audio formats.
• With its intuitive interface, you can easily cut, trim or copy.

Wrapping Up

Have you learned something from us? We indeed think you have. After reading the above article about 10 different software, all of you will easily detach audio from videos. The article has shared detailed information regarding different helping software for this task.

Versatile Video Editor - Wondershare Filmora

An easy and powerful editor

Numerous effects to choose from.

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

2. Audacity

The next audio-related platform is Audacity. If you want to extract and detach audio from video, then Audacity is an amazing software for this. The software can be used to create unexpected songs. With the File Glue function, you can mix various elements and create melodious songs.

It also has a huge collection of sound effects. There are many more features of this audio extractor. Let us shed light on a few.

• The most significant feature of Audacity is that it can extract, mix and also copy music.
• The software extends support to multiple formats like MP3, WAV, FLAC, AIFF, etc.
• Audacity offers built-in effects for audio files.

3. Windows Movie Maker

Are you ready to talk about another software? Windows Movie Maker is yet another audio extractor known for its features and performance. Its amazing speed helps to detach sound from video quickly. The software was released by Microsoft.

The fact that it offers audio extraction for free is very crazy. Moreover, it’s a very easy process to do. Windows Movie Maker has a lot of other features that should be explored.

• Audio editing like trim, split, adjusting music volume, etc., can be done with Windows Movie Maker.
• The software allows you to add effects transitions and also extract audio from video.
• Share your audio files to Facebook, YouTube, and other social media platforms from this editor.

4. VLC Media Player

Have you ever heard about VLC before? You must have. This is very famous software. The media player offers a wide range of features. The software is compatible with all platforms, and you can play everything on it, which is why VLC is among the top-known software in the current market.

The software supports various video formats and expands its circle to a lot of other media files. Let us share its features so that you get to know more about VLC.

• As mentioned earlier, it supports multimedia files like DVDs, Audio CDs, and VCDs.
• The coolest thing with VLC is that you can adjust the audio codec and bit rate.
• With VLC, you can perform audio detach from videos.

5. Apowersoft Video Converter

The following software in the list to be discussed is Apowersoft Video Converter. The software is primarily a video converter, but it is also an Audio Extractor. The software has many distinct features because it holds a place in the market. Apowersoft can be used online as well as could be downloaded. The software is also known for its stunning Audio Editing tool. Let’s look at its other features.

• The software supports numerous file formats, including WMA, FLAC, MP3, etc.
• With Apowersoft Video Converter, you can detach audiofrom your video for free.
• Convert the audio format from Apowersoft to device-compatible format.

6. Wondershare UniConverter

Should we move to the next software? Well, it’s UniConverter. The software is quite easy to use. You can detach audio from videos with this extractor software. It works on videos despite the video format and quality. The user can simply convert their video into an audio format while sustaining the quality. It works like an audio extractor that allows users to give a purposeful use case with it. Want to know more about Wondershare UniConverter? Let’s share its features.

• Wondershare UniConverter promises to deliver final results with good quality.
• It supports various formats like FLAC, MP3, OGG, and more.
• It utilizes full GPU acceleration for high-speed conversion.

7. MiniTool MovieMaker

Who likes to see ads when they are working? Probably no one. MiniTool MovieMaker falls perfectly for this requirement. The movie maker tool is free to use. You don’t need any registration to use it. We all are worried about virus attacks on our computers, but MiniTool MovieMaker has no virus. The software has a very intuitive interface that makes it easy to use. Some more features of this software are:

• The software has impressive audio editing tools which help in audio detach
• Its format support expands over a wide range, including MOV, AVI, MP4, MPG, MKV, etc.
• With MiniTool MovieMaker, split, trim, and even combine your audio clips.

8. Ocenaudio

Another perfect software to detach audio from videos is Ocenaudio. The software offers full spectrogram settings. You can analyze your audio’s spectral content and edit audio tracks. Allow us to highlight some more Ocenaudio features.

• The software has an extensive collection of sound effects.
• Ocenaudio extracts audio from video files despite their length.
• The software promises not to damage the video file during extraction.

9. AOA Audio Extractor

Moving on to the next software, AOA Audio Extractor is a proficient audio extractor software. Users can work with any audio format to detach sound from videos. The audio extracting software is quite powerful. It supports audio conversion. Let us add its features to impress you.

• The software supports audio extraction from 5-minute videos.
• While extracting audio with this software, you can adjust the bit rate, frequency, quality, etc.
• In case you have saved the file in the wrong format, with AOA Audio Extractor, you can convert its format.

10. Free Audio Editor

Are you ready to discuss the last software? It is Free Audio Editor. Its name is self-explanatory. The software is for audio editing, and most importantly, it’s free. The best part about this software is that you can download videos from YouTube and then detach audio from video. Some more of its interesting features are added below.

• With this software, you can not only edit your audios but also record them.
• Free Audio Editor supports more than 25 audio formats.
• With its intuitive interface, you can easily cut, trim or copy.

Wrapping Up

Have you learned something from us? We indeed think you have. After reading the above article about 10 different software, all of you will easily detach audio from videos. The article has shared detailed information regarding different helping software for this task.

Versatile Video Editor - Wondershare Filmora

An easy and powerful editor

Numerous effects to choose from.

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

2. Audacity

The next audio-related platform is Audacity. If you want to extract and detach audio from video, then Audacity is an amazing software for this. The software can be used to create unexpected songs. With the File Glue function, you can mix various elements and create melodious songs.

It also has a huge collection of sound effects. There are many more features of this audio extractor. Let us shed light on a few.

• The most significant feature of Audacity is that it can extract, mix and also copy music.
• The software extends support to multiple formats like MP3, WAV, FLAC, AIFF, etc.
• Audacity offers built-in effects for audio files.

3. Windows Movie Maker

Are you ready to talk about another software? Windows Movie Maker is yet another audio extractor known for its features and performance. Its amazing speed helps to detach sound from video quickly. The software was released by Microsoft.

The fact that it offers audio extraction for free is very crazy. Moreover, it’s a very easy process to do. Windows Movie Maker has a lot of other features that should be explored.

• Audio editing like trim, split, adjusting music volume, etc., can be done with Windows Movie Maker.
• The software allows you to add effects transitions and also extract audio from video.
• Share your audio files to Facebook, YouTube, and other social media platforms from this editor.

4. VLC Media Player

Have you ever heard about VLC before? You must have. This is very famous software. The media player offers a wide range of features. The software is compatible with all platforms, and you can play everything on it, which is why VLC is among the top-known software in the current market.

The software supports various video formats and expands its circle to a lot of other media files. Let us share its features so that you get to know more about VLC.

• As mentioned earlier, it supports multimedia files like DVDs, Audio CDs, and VCDs.
• The coolest thing with VLC is that you can adjust the audio codec and bit rate.
• With VLC, you can perform audio detach from videos.

5. Apowersoft Video Converter

The following software in the list to be discussed is Apowersoft Video Converter. The software is primarily a video converter, but it is also an Audio Extractor. The software has many distinct features because it holds a place in the market. Apowersoft can be used online as well as could be downloaded. The software is also known for its stunning Audio Editing tool. Let’s look at its other features.

• The software supports numerous file formats, including WMA, FLAC, MP3, etc.
• With Apowersoft Video Converter, you can detach audiofrom your video for free.
• Convert the audio format from Apowersoft to device-compatible format.

6. Wondershare UniConverter

Should we move to the next software? Well, it’s UniConverter. The software is quite easy to use. You can detach audio from videos with this extractor software. It works on videos despite the video format and quality. The user can simply convert their video into an audio format while sustaining the quality. It works like an audio extractor that allows users to give a purposeful use case with it. Want to know more about Wondershare UniConverter? Let’s share its features.

• Wondershare UniConverter promises to deliver final results with good quality.
• It supports various formats like FLAC, MP3, OGG, and more.
• It utilizes full GPU acceleration for high-speed conversion.

7. MiniTool MovieMaker

Who likes to see ads when they are working? Probably no one. MiniTool MovieMaker falls perfectly for this requirement. The movie maker tool is free to use. You don’t need any registration to use it. We all are worried about virus attacks on our computers, but MiniTool MovieMaker has no virus. The software has a very intuitive interface that makes it easy to use. Some more features of this software are:

• The software has impressive audio editing tools which help in audio detach
• Its format support expands over a wide range, including MOV, AVI, MP4, MPG, MKV, etc.
• With MiniTool MovieMaker, split, trim, and even combine your audio clips.

8. Ocenaudio

Another perfect software to detach audio from videos is Ocenaudio. The software offers full spectrogram settings. You can analyze your audio’s spectral content and edit audio tracks. Allow us to highlight some more Ocenaudio features.

• The software has an extensive collection of sound effects.
• Ocenaudio extracts audio from video files despite their length.
• The software promises not to damage the video file during extraction.

9. AOA Audio Extractor

Moving on to the next software, AOA Audio Extractor is a proficient audio extractor software. Users can work with any audio format to detach sound from videos. The audio extracting software is quite powerful. It supports audio conversion. Let us add its features to impress you.

• The software supports audio extraction from 5-minute videos.
• While extracting audio with this software, you can adjust the bit rate, frequency, quality, etc.
• In case you have saved the file in the wrong format, with AOA Audio Extractor, you can convert its format.

10. Free Audio Editor

Are you ready to discuss the last software? It is Free Audio Editor. Its name is self-explanatory. The software is for audio editing, and most importantly, it’s free. The best part about this software is that you can download videos from YouTube and then detach audio from video. Some more of its interesting features are added below.

• With this software, you can not only edit your audios but also record them.
• Free Audio Editor supports more than 25 audio formats.
• With its intuitive interface, you can easily cut, trim or copy.

Wrapping Up

Have you learned something from us? We indeed think you have. After reading the above article about 10 different software, all of you will easily detach audio from videos. The article has shared detailed information regarding different helping software for this task.

Versatile Video Editor - Wondershare Filmora

An easy and powerful editor

Numerous effects to choose from.

Try It Free Try It Free

Harmonizing Audio with Cinematic Footage

Whether you are making a casual video for sharing with friends or making something much more complex for uploading on social media, all videos are not complete without the right music. While you can easily find the right song and music, you may get confused when you want to put music behind video that you may want to upload on social media. Thus, we are here with a complete detailed guide on how to put music over a video. To help you in easily learning how to put music behind a video, we have given multiple methods down below. This includes methods that need a computer, methods to put music on video online, methods on how to put music on Kinemaster, and much more.

In this article

01 [How to Put Music Over a Video?](#Part 1)

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Also read: