Audio Harmony in Editing: Perfecting the Dance Between Music and Visuals in Final Cut Pro X

How to Edit the Beat and Sync Videos to Music in Final Cut Pro X

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Perfecting Audio Transitions in Live Streaming: The OBS Guide to Equalizing Sounds

How to Balance Your Stream Sound with OBS Audio Ducking?

Benjamin Arango

Oct 26, 2023• Proven solutions

Video making or filmmaking has now come to the level where the history of imperfections faded away a long time ago. Yes, while the animation is still ruling the floor, an inevitable back-end process might look off-screen and a little complicated. One such job is ducking sound that is the process of balancing voiceover and the background audio. If you aren’t a tech-savvy person, I hope to go in-depth isn’t needed, and hence we stop here. To depict how you need to work out this ducking music process, we have this post.

If you are a content creator, maybe you will be familiar with coordinating the right audio with the video. If not, it isn’t a problem anymore as I have included a detailed guide of implementing audio ducking in a step-wise way. With primary importance to the popular software OBS followed by a suitable alternative, let’s begin our article!

Part 1: How to Balance Your Stream Sound with OBS Audio Ducking?

OBS (Open Broadcaster Software) is free and open-source software reliable for Windows, Linux, and macOS 10.13+. With countless features like real video/audio capture, mixer, custom transitions, easy-to-use configurations, pre-source filters, VST plug-in support, noise suppression, and a lot more, you can accomplish audio ducking in OBS by adding a sidechain/ducking compression filter. Thus, perform OBS audio ducking in a clean manner by lowering the audio automatically once OBS detects audio on the other audio source.

Does this magic of OBS audio ducking seem new to you? It will not be anymore as the below step-by-step manual will guide you through the process.

Step 1: Add video files

Launch the OBS software on your system, and import the files into the workspace with the “File” menu. If you need to add voiceover from your microphone, you can click the “Start Recording” option under the main interface’s control section.

If the video plays on VLC in the background, it will appear on the mixer column.

Step 2: Choose filter and compressor

On the Settings icon next to the streaming video, click on it, and choose the “Filters” option from the drop-down.

You will reach the pop-up of the “Filters for Desktop Audio” whereby clicking on the “+” icon, choose the compressor option.

On the space bar, enter a name for the filter. For example, for ducking music, specify as “ducking,” and press “OK.”

Step 3: Change the parameters

You can now specify the values of the ratio, threshold, attack, release, output gain, and the ducking source, for example, “Mic” for microphone voiceover addition.

It’s complete. Yes, OBS audio ducking is over. Now you can check the video and alter the parameters if required after a preview.

Part 2: The Best Audio Ducking Alternative to OBS

Although OBS is preferable for being an open-source and free option with comprehensive abilities in video recording and live streaming strategies, the OBS ducking interface might seem a little unfriendly, making it difficult for newbies. Hence, we have come up with Wondershare Filmora in this session as the best alternative to Streamlabs OBS audio ducking. With an intuitive easy-to-use interface, and attractive video/audio features, Filmora stands as the recommended choice for professionals and beginners!

Developed for the inspired, Filmora follows its unique way of ducking sound, easy to handle for travel Vlogs, makeup tutorials, video lectures, presentations, and so on. Going through the below feature set can reveal why is Filmora is better than OBS.

• With simple steps, you can perform audio ducking in just on a single scale to attain the right audio balance on your video without complication.
• Get access to other in-built options like noise remover, after effects; fade in/out, equalizer, keyframing, and so on.
• Perfect your audio to the video along with tons of features like an audio mixer along with options like mute, detach, split, and background removal.
• Add voiceover, sprinkle magic with filters, detect beat, and create markers easily with Wondershare Filmora.

How to use the audio ducking feature in Wondershare Filmora?

Download and install Wondershare Filmora by clicking on the Try It Free button above. Once installed, follow the steps below.

Step 1: Launch the application

Open or launch the Wondershare Filmora application and choose “New Project“ or open the existing project from the primary dashboard.

Step 2: Import the video into the timeline

Drag the video file to which you need to balance the stream sound.

Another option to bring the video file into the timeline is by executing “File> Import Media> Import Media Files”.

Step 3: Ducking sound in the video

Select the clips with dialogue, whereby right-clicking or double-clicking on them, choose the “Adjust Audio” option.

On the following audio editing window, tick the “Lower the volume of other clips“ option to reduce background music or any other media volume.

Conclusion

I hope you have now come to know why ducking sound is a must and how well Streamlabs OBS and Wondershare Filmora carry out the job. Lastly, with the step-by-step guide to accomplish audio ducking with both the software, we can conclude that OBS performance is better, whereas Wondershare Filmora is the best choice in terms of interface and features!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Video making or filmmaking has now come to the level where the history of imperfections faded away a long time ago. Yes, while the animation is still ruling the floor, an inevitable back-end process might look off-screen and a little complicated. One such job is ducking sound that is the process of balancing voiceover and the background audio. If you aren’t a tech-savvy person, I hope to go in-depth isn’t needed, and hence we stop here. To depict how you need to work out this ducking music process, we have this post.

If you are a content creator, maybe you will be familiar with coordinating the right audio with the video. If not, it isn’t a problem anymore as I have included a detailed guide of implementing audio ducking in a step-wise way. With primary importance to the popular software OBS followed by a suitable alternative, let’s begin our article!

Part 1: How to Balance Your Stream Sound with OBS Audio Ducking?

OBS (Open Broadcaster Software) is free and open-source software reliable for Windows, Linux, and macOS 10.13+. With countless features like real video/audio capture, mixer, custom transitions, easy-to-use configurations, pre-source filters, VST plug-in support, noise suppression, and a lot more, you can accomplish audio ducking in OBS by adding a sidechain/ducking compression filter. Thus, perform OBS audio ducking in a clean manner by lowering the audio automatically once OBS detects audio on the other audio source.

Does this magic of OBS audio ducking seem new to you? It will not be anymore as the below step-by-step manual will guide you through the process.

Step 1: Add video files

Launch the OBS software on your system, and import the files into the workspace with the “File” menu. If you need to add voiceover from your microphone, you can click the “Start Recording” option under the main interface’s control section.

If the video plays on VLC in the background, it will appear on the mixer column.

Step 2: Choose filter and compressor

On the Settings icon next to the streaming video, click on it, and choose the “Filters” option from the drop-down.

You will reach the pop-up of the “Filters for Desktop Audio” whereby clicking on the “+” icon, choose the compressor option.

On the space bar, enter a name for the filter. For example, for ducking music, specify as “ducking,” and press “OK.”

Step 3: Change the parameters

You can now specify the values of the ratio, threshold, attack, release, output gain, and the ducking source, for example, “Mic” for microphone voiceover addition.

It’s complete. Yes, OBS audio ducking is over. Now you can check the video and alter the parameters if required after a preview.

Part 2: The Best Audio Ducking Alternative to OBS

Although OBS is preferable for being an open-source and free option with comprehensive abilities in video recording and live streaming strategies, the OBS ducking interface might seem a little unfriendly, making it difficult for newbies. Hence, we have come up with Wondershare Filmora in this session as the best alternative to Streamlabs OBS audio ducking. With an intuitive easy-to-use interface, and attractive video/audio features, Filmora stands as the recommended choice for professionals and beginners!

Developed for the inspired, Filmora follows its unique way of ducking sound, easy to handle for travel Vlogs, makeup tutorials, video lectures, presentations, and so on. Going through the below feature set can reveal why is Filmora is better than OBS.

• With simple steps, you can perform audio ducking in just on a single scale to attain the right audio balance on your video without complication.
• Get access to other in-built options like noise remover, after effects; fade in/out, equalizer, keyframing, and so on.
• Perfect your audio to the video along with tons of features like an audio mixer along with options like mute, detach, split, and background removal.
• Add voiceover, sprinkle magic with filters, detect beat, and create markers easily with Wondershare Filmora.

How to use the audio ducking feature in Wondershare Filmora?

Download and install Wondershare Filmora by clicking on the Try It Free button above. Once installed, follow the steps below.

Step 1: Launch the application

Open or launch the Wondershare Filmora application and choose “New Project“ or open the existing project from the primary dashboard.

Step 2: Import the video into the timeline

Drag the video file to which you need to balance the stream sound.

Another option to bring the video file into the timeline is by executing “File> Import Media> Import Media Files”.

Step 3: Ducking sound in the video

Select the clips with dialogue, whereby right-clicking or double-clicking on them, choose the “Adjust Audio” option.

On the following audio editing window, tick the “Lower the volume of other clips“ option to reduce background music or any other media volume.

Conclusion

I hope you have now come to know why ducking sound is a must and how well Streamlabs OBS and Wondershare Filmora carry out the job. Lastly, with the step-by-step guide to accomplish audio ducking with both the software, we can conclude that OBS performance is better, whereas Wondershare Filmora is the best choice in terms of interface and features!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Video making or filmmaking has now come to the level where the history of imperfections faded away a long time ago. Yes, while the animation is still ruling the floor, an inevitable back-end process might look off-screen and a little complicated. One such job is ducking sound that is the process of balancing voiceover and the background audio. If you aren’t a tech-savvy person, I hope to go in-depth isn’t needed, and hence we stop here. To depict how you need to work out this ducking music process, we have this post.

If you are a content creator, maybe you will be familiar with coordinating the right audio with the video. If not, it isn’t a problem anymore as I have included a detailed guide of implementing audio ducking in a step-wise way. With primary importance to the popular software OBS followed by a suitable alternative, let’s begin our article!

Part 1: How to Balance Your Stream Sound with OBS Audio Ducking?

OBS (Open Broadcaster Software) is free and open-source software reliable for Windows, Linux, and macOS 10.13+. With countless features like real video/audio capture, mixer, custom transitions, easy-to-use configurations, pre-source filters, VST plug-in support, noise suppression, and a lot more, you can accomplish audio ducking in OBS by adding a sidechain/ducking compression filter. Thus, perform OBS audio ducking in a clean manner by lowering the audio automatically once OBS detects audio on the other audio source.

Does this magic of OBS audio ducking seem new to you? It will not be anymore as the below step-by-step manual will guide you through the process.

Step 1: Add video files

Launch the OBS software on your system, and import the files into the workspace with the “File” menu. If you need to add voiceover from your microphone, you can click the “Start Recording” option under the main interface’s control section.

If the video plays on VLC in the background, it will appear on the mixer column.

Step 2: Choose filter and compressor

On the Settings icon next to the streaming video, click on it, and choose the “Filters” option from the drop-down.

You will reach the pop-up of the “Filters for Desktop Audio” whereby clicking on the “+” icon, choose the compressor option.

On the space bar, enter a name for the filter. For example, for ducking music, specify as “ducking,” and press “OK.”

Step 3: Change the parameters

You can now specify the values of the ratio, threshold, attack, release, output gain, and the ducking source, for example, “Mic” for microphone voiceover addition.

It’s complete. Yes, OBS audio ducking is over. Now you can check the video and alter the parameters if required after a preview.

Part 2: The Best Audio Ducking Alternative to OBS

Although OBS is preferable for being an open-source and free option with comprehensive abilities in video recording and live streaming strategies, the OBS ducking interface might seem a little unfriendly, making it difficult for newbies. Hence, we have come up with Wondershare Filmora in this session as the best alternative to Streamlabs OBS audio ducking. With an intuitive easy-to-use interface, and attractive video/audio features, Filmora stands as the recommended choice for professionals and beginners!

Developed for the inspired, Filmora follows its unique way of ducking sound, easy to handle for travel Vlogs, makeup tutorials, video lectures, presentations, and so on. Going through the below feature set can reveal why is Filmora is better than OBS.

• With simple steps, you can perform audio ducking in just on a single scale to attain the right audio balance on your video without complication.
• Get access to other in-built options like noise remover, after effects; fade in/out, equalizer, keyframing, and so on.
• Perfect your audio to the video along with tons of features like an audio mixer along with options like mute, detach, split, and background removal.
• Add voiceover, sprinkle magic with filters, detect beat, and create markers easily with Wondershare Filmora.

How to use the audio ducking feature in Wondershare Filmora?

Download and install Wondershare Filmora by clicking on the Try It Free button above. Once installed, follow the steps below.

Step 1: Launch the application

Open or launch the Wondershare Filmora application and choose “New Project“ or open the existing project from the primary dashboard.

Step 2: Import the video into the timeline

Drag the video file to which you need to balance the stream sound.

Another option to bring the video file into the timeline is by executing “File> Import Media> Import Media Files”.

Step 3: Ducking sound in the video

Select the clips with dialogue, whereby right-clicking or double-clicking on them, choose the “Adjust Audio” option.

On the following audio editing window, tick the “Lower the volume of other clips“ option to reduce background music or any other media volume.

Conclusion

I hope you have now come to know why ducking sound is a must and how well Streamlabs OBS and Wondershare Filmora carry out the job. Lastly, with the step-by-step guide to accomplish audio ducking with both the software, we can conclude that OBS performance is better, whereas Wondershare Filmora is the best choice in terms of interface and features!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Video making or filmmaking has now come to the level where the history of imperfections faded away a long time ago. Yes, while the animation is still ruling the floor, an inevitable back-end process might look off-screen and a little complicated. One such job is ducking sound that is the process of balancing voiceover and the background audio. If you aren’t a tech-savvy person, I hope to go in-depth isn’t needed, and hence we stop here. To depict how you need to work out this ducking music process, we have this post.

If you are a content creator, maybe you will be familiar with coordinating the right audio with the video. If not, it isn’t a problem anymore as I have included a detailed guide of implementing audio ducking in a step-wise way. With primary importance to the popular software OBS followed by a suitable alternative, let’s begin our article!

Part 1: How to Balance Your Stream Sound with OBS Audio Ducking?

OBS (Open Broadcaster Software) is free and open-source software reliable for Windows, Linux, and macOS 10.13+. With countless features like real video/audio capture, mixer, custom transitions, easy-to-use configurations, pre-source filters, VST plug-in support, noise suppression, and a lot more, you can accomplish audio ducking in OBS by adding a sidechain/ducking compression filter. Thus, perform OBS audio ducking in a clean manner by lowering the audio automatically once OBS detects audio on the other audio source.

Does this magic of OBS audio ducking seem new to you? It will not be anymore as the below step-by-step manual will guide you through the process.

Step 1: Add video files

Launch the OBS software on your system, and import the files into the workspace with the “File” menu. If you need to add voiceover from your microphone, you can click the “Start Recording” option under the main interface’s control section.

If the video plays on VLC in the background, it will appear on the mixer column.

Step 2: Choose filter and compressor

On the Settings icon next to the streaming video, click on it, and choose the “Filters” option from the drop-down.

You will reach the pop-up of the “Filters for Desktop Audio” whereby clicking on the “+” icon, choose the compressor option.

On the space bar, enter a name for the filter. For example, for ducking music, specify as “ducking,” and press “OK.”

Step 3: Change the parameters

You can now specify the values of the ratio, threshold, attack, release, output gain, and the ducking source, for example, “Mic” for microphone voiceover addition.

It’s complete. Yes, OBS audio ducking is over. Now you can check the video and alter the parameters if required after a preview.

Part 2: The Best Audio Ducking Alternative to OBS

Although OBS is preferable for being an open-source and free option with comprehensive abilities in video recording and live streaming strategies, the OBS ducking interface might seem a little unfriendly, making it difficult for newbies. Hence, we have come up with Wondershare Filmora in this session as the best alternative to Streamlabs OBS audio ducking. With an intuitive easy-to-use interface, and attractive video/audio features, Filmora stands as the recommended choice for professionals and beginners!

Developed for the inspired, Filmora follows its unique way of ducking sound, easy to handle for travel Vlogs, makeup tutorials, video lectures, presentations, and so on. Going through the below feature set can reveal why is Filmora is better than OBS.

• With simple steps, you can perform audio ducking in just on a single scale to attain the right audio balance on your video without complication.
• Get access to other in-built options like noise remover, after effects; fade in/out, equalizer, keyframing, and so on.
• Perfect your audio to the video along with tons of features like an audio mixer along with options like mute, detach, split, and background removal.
• Add voiceover, sprinkle magic with filters, detect beat, and create markers easily with Wondershare Filmora.

How to use the audio ducking feature in Wondershare Filmora?

Download and install Wondershare Filmora by clicking on the Try It Free button above. Once installed, follow the steps below.

Step 1: Launch the application

Open or launch the Wondershare Filmora application and choose “New Project“ or open the existing project from the primary dashboard.

Step 2: Import the video into the timeline

Drag the video file to which you need to balance the stream sound.

Another option to bring the video file into the timeline is by executing “File> Import Media> Import Media Files”.

Step 3: Ducking sound in the video

Select the clips with dialogue, whereby right-clicking or double-clicking on them, choose the “Adjust Audio” option.

On the following audio editing window, tick the “Lower the volume of other clips“ option to reduce background music or any other media volume.

Conclusion

I hope you have now come to know why ducking sound is a must and how well Streamlabs OBS and Wondershare Filmora carry out the job. Lastly, with the step-by-step guide to accomplish audio ducking with both the software, we can conclude that OBS performance is better, whereas Wondershare Filmora is the best choice in terms of interface and features!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Silent Stream Sculptors: Crafting Audience-Free Video Formats (MP4, MKV, AVI, MOV, WMV)

The chances are that you want to remove the audio track from a video clip and get only a video stream as an output. This is much easier than you think because there are many software available to do this. This article will show you how to perform this job with a simple and easy-to-use video editing program: Wondershare Filmora . With this ingenious tool, detaching the audio from video turns into a simple task: only with a click of mouse. Then, you can delete it directly or save it for future use. The following article will provide more information and a step-by-step guide on how to remove audio from video files.

You may also like:

10 Best Software to Detach Audio from Video in 2022 >>
How to Add Audio to Your Video> >>

Audio Remover: Wondershare Filmora

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Why Choose Wondershare Filmora

• Remove audio from all kinds of video formats, including AVI, WMV, WTV, MOV, MKV, FLV, etc;
• Completely remove the audio from video to keep video-only stream or mute the audio of a source video;
• Other functions such as add effect/subtitle/watermark to video; trim/crop/rotate video files and more;
• Save your video in different formats, burn to DVD or upload to YouTube and Facebook;
• Supported OS: Windows (Windows 8 included) & Mac OS X (above 10.6).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

1. Import your videos

Click “Import” to browse your file folder on hard disk and then pick up the videos you want to remove audio. To select multiple files, hold down the “Ctrl” button when choosing other files. All loaded files will display as thumbnails in the file tray. Doubling click them, you can preview it in the right screen window.

2. Remove audio from video

Drag video from file tray to the Video Timeline. Right-click it and select “Audio Detach.” Immediately, you’ll see a separate audio file in the Music Timeline. Yes, this is the audio track of your original video. Now just hit “Delete” on the keyboard to remove the audio.

Tips:
1. The files on Video Timeline will be merged seamlessly together by default. If you have multiple files to remove audio and need to save to separate files, please click the left top program icon and save to different project files first. After that, load the project file again and export the output file one by one.
2. You can also use the “Mute” option to remove the audio from the video, but you won’t get the audio track with this option.

3. Save the video

Double click the file in Video Timeline to check if this is what you want. If necessary, you can add some music files that fit this video. Or directly click “Create” to export only the video track. Pick your wanted format to save it on your computer in the pop-up format window.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Why Choose Wondershare Filmora

• Remove audio from all kinds of video formats, including AVI, WMV, WTV, MOV, MKV, FLV, etc;
• Completely remove the audio from video to keep video-only stream or mute the audio of a source video;
• Other functions such as add effect/subtitle/watermark to video; trim/crop/rotate video files and more;
• Save your video in different formats, burn to DVD or upload to YouTube and Facebook;
• Supported OS: Windows (Windows 8 included) & Mac OS X (above 10.6).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

1. Import your videos

Click “Import” to browse your file folder on hard disk and then pick up the videos you want to remove audio. To select multiple files, hold down the “Ctrl” button when choosing other files. All loaded files will display as thumbnails in the file tray. Doubling click them, you can preview it in the right screen window.

2. Remove audio from video

Drag video from file tray to the Video Timeline. Right-click it and select “Audio Detach.” Immediately, you’ll see a separate audio file in the Music Timeline. Yes, this is the audio track of your original video. Now just hit “Delete” on the keyboard to remove the audio.

Tips:
1. The files on Video Timeline will be merged seamlessly together by default. If you have multiple files to remove audio and need to save to separate files, please click the left top program icon and save to different project files first. After that, load the project file again and export the output file one by one.
2. You can also use the “Mute” option to remove the audio from the video, but you won’t get the audio track with this option.

3. Save the video

Double click the file in Video Timeline to check if this is what you want. If necessary, you can add some music files that fit this video. Or directly click “Create” to export only the video track. Pick your wanted format to save it on your computer in the pop-up format window.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Why Choose Wondershare Filmora

• Remove audio from all kinds of video formats, including AVI, WMV, WTV, MOV, MKV, FLV, etc;
• Completely remove the audio from video to keep video-only stream or mute the audio of a source video;
• Other functions such as add effect/subtitle/watermark to video; trim/crop/rotate video files and more;
• Save your video in different formats, burn to DVD or upload to YouTube and Facebook;
• Supported OS: Windows (Windows 8 included) & Mac OS X (above 10.6).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

1. Import your videos

Click “Import” to browse your file folder on hard disk and then pick up the videos you want to remove audio. To select multiple files, hold down the “Ctrl” button when choosing other files. All loaded files will display as thumbnails in the file tray. Doubling click them, you can preview it in the right screen window.

2. Remove audio from video

Drag video from file tray to the Video Timeline. Right-click it and select “Audio Detach.” Immediately, you’ll see a separate audio file in the Music Timeline. Yes, this is the audio track of your original video. Now just hit “Delete” on the keyboard to remove the audio.

Tips:
1. The files on Video Timeline will be merged seamlessly together by default. If you have multiple files to remove audio and need to save to separate files, please click the left top program icon and save to different project files first. After that, load the project file again and export the output file one by one.
2. You can also use the “Mute” option to remove the audio from the video, but you won’t get the audio track with this option.

3. Save the video

Double click the file in Video Timeline to check if this is what you want. If necessary, you can add some music files that fit this video. Or directly click “Create” to export only the video track. Pick your wanted format to save it on your computer in the pop-up format window.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Why Choose Wondershare Filmora

• Remove audio from all kinds of video formats, including AVI, WMV, WTV, MOV, MKV, FLV, etc;
• Completely remove the audio from video to keep video-only stream or mute the audio of a source video;
• Other functions such as add effect/subtitle/watermark to video; trim/crop/rotate video files and more;
• Save your video in different formats, burn to DVD or upload to YouTube and Facebook;
• Supported OS: Windows (Windows 8 included) & Mac OS X (above 10.6).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

1. Import your videos

Click “Import” to browse your file folder on hard disk and then pick up the videos you want to remove audio. To select multiple files, hold down the “Ctrl” button when choosing other files. All loaded files will display as thumbnails in the file tray. Doubling click them, you can preview it in the right screen window.

2. Remove audio from video

Drag video from file tray to the Video Timeline. Right-click it and select “Audio Detach.” Immediately, you’ll see a separate audio file in the Music Timeline. Yes, this is the audio track of your original video. Now just hit “Delete” on the keyboard to remove the audio.

Tips:
1. The files on Video Timeline will be merged seamlessly together by default. If you have multiple files to remove audio and need to save to separate files, please click the left top program icon and save to different project files first. After that, load the project file again and export the output file one by one.
2. You can also use the “Mute” option to remove the audio from the video, but you won’t get the audio track with this option.

3. Save the video

Double click the file in Video Timeline to check if this is what you want. If necessary, you can add some music files that fit this video. Or directly click “Create” to export only the video track. Pick your wanted format to save it on your computer in the pop-up format window.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Also read: