Harmonizing Technology with Taste: Your Guide to Mastering Audio Format Selection

How to Choose Best Audio Formats

Benjamin Arango

Mar 27, 2024• Proven solutions

The quality of sound that you hear depends on various factors, and an appropriate audio format is one of them. While each type of acoustic file has its own significance, choosing the best audio format as per the target player, expected audience, and/or supporting videos or images (if any) is something that needs much consideration to offer a flawless listening experience.

With that said, here you will learn about some of the most common sound file types, which among them could be the best audio format according to your requirements, and a couple of important points that you must keep in might while picking an extension for your media preparations.

• Part 1: 10 Most Common Audio Formats
• Part 2: How to Choose Best Audio Format?
• Part 3: Which Audio File Formats Does YouTube Support?
• Part 4: Audio Format in Filmora

Using Filmora to Record & Edit & Save Audio Easily

Wondershare Filmora is a simple yet robust video editing software that allows you to save a video to mp3 easily. Besides, if you want to remove background noise from audio, or change the audio volume or remove unwanted audio parts from the video, you should definitely try Filmora.

---

Part 1: 10 Most Common Audio Formats

Before listing the most common audio file formats, it is important to understand the categories of the sound files. Every audio format that exists belongs to one (or more) category depending on the way it is being created and the characteristics it has.

In a nutshell, there are three major categories, including:

• Uncompressed Audio Format
• Lossless Compressed Audio Format
• Lossy Compressed Audio Format

Below is a brief introduction of each of the classes listed above along with the audio file types that belong to them:

1. Uncompressed Audio Format

Uncompressed audio is the original sound that has been recorded directly from the source in the analog form, and then converted to a digital signal without any modifications or compressions. Because an uncompressed sound is prepared with no retouching or manipulations, it gives an as-is listening experience. Since no compression is done on such a file either, it occupies a remarkably huge amount of space on your storage media.

Some sound files that fall under this category include:

1) Pulse-Code Modulation (PCM)

A PCM file is the digital version of an analog waveform that is created by recording the audio samples, technically known as pulses. The PCM format is mostly used when creating optical media discs, typically the CDs and DVDs.

2) Waveform Audio File Format (WAV)

Generally used on the Windows platform, this audio format is not a file itself but a container that may contain both compressed or uncompressed files. However, in most cases, it is the latter that a WAV file has, and PCM format is one of them.

You may also interest: YouTube to WAV >>

3) Audio Interchange File Format (AIFF)

AIFF is almost identical to WAV format in its characteristics with the only difference that, unlike the latter, it was developed by Apple somewhere in 1988, and works as a container for both compressed and uncompressed audio files. While the compressed version of the format is called AIFF-C, the term Apple Loop is used when the scenario is otherwise. As it is with WAV, even AIFF files mostly contain uncompressed audio, that usually is PCM.

You may also like: Best AIFF to MP3 Converters >>

4) Data Stream Digital (DSD)

Used by Sony and Phillips, DSD is also not a format itself but a container that can store PCM files to provide decent sound quality. However, due to distortions in the composed audio, DSD files are not much in trend.

2. Lossless Compressed Audio Format

Lossless Compressed audio format is a type of file that is compressed using some advanced methods without compromising with the quality of the sound. This means that when played, you experience the same acoustic excellence as that of the source, i.e. uncompressed audio. However, even though the lossless compressed files are comparatively small in size, they still occupy decent amount of space on the hard drive or any other storage media in use.

Some formats that fall under the lossless compressed category include:

1) Free Lossless Audio Code (FLAC)

At around half the size of the source sound file, FLAC offers the original audio quality without removing any acoustic information during compression. Being an opensource and royalty-free audio format, FLAC is even easier to get, and in most cases is used as an alternative to MP3.

Check some of the best FLAC editor programs >>

2) Apple Lossless Audio Codec (ALAC)

Introduced by Apple Inc. and initially released as a proprietary product, ALAC was made royalty-free and opensource in 2011. Even though ALAC files are larger in size when compared to FLAC, the former format is used in iTunes and iOS as the latter isn’t supported by these platforms.

3. Lossy Compressed Audio Format

These are the highly compressed files that occupy significantly less amount of space on your storage media. However, during the compression process, some acoustic information is lost in order to reduce the file size. Nevertheless, if compressed correctly, the deterioration in the quality is almost negligible, and cannot be experienced unless the listener is quite experienced and the source recording is played next to the compressed audio simultaneously.

Some audio formats that fall under the lossy compressed category include:

1) MPEG-1 Audio Layer 3 (MP3)

This is one of the most common file types and the best audio format for almost all media types that have sound. An MP3 file is free from the noises of the least significant in the composed audio. In addition, all the acoustic information with the frequency that normal human beings fail to catch (below 20Hz and above 20000Hz) is safely erased during compilation and compression. Furthermore, what makes MP3 the best audio file format is its ability to accommodate with almost all the devices of nearly any platform such as Android, Windows, iOS, Mac, etc.

Check this MP3 editor and convert video to MP3 easily.

2) OGG

This one, again, is not in fact an audio format but is a container for audio that generally stores Vorbis files. Although OGG files are way advanced in terms of sound quality and even offer higher compression ratio when compared with MP3, they are not much in use as many platforms and devices don’t support the format till date.

3) AU

AU is a format by Sun, DEC, and NeXT. It is yet another container that can hold both lossless and lossy files. AU files are mostly used in UNIX.

What’s the difference between common audio file formats like MP3, WAV, and FLAC? Watch the video below to learn more.

---

Part 2: How to Choose Best Audio Format?

If you are a media creator, and are into the business of preparing audio and video content for your clients or directly for the audience, it is imperative to understand what could be the best audio file format to compose the audiovisual files. Here are a few tips that you must keep in mind in this context before proceeding:

• Uncompressed Audio

If the media type you are about to create is expected to be used for further editing before exporting to a different format, using an uncompressed audio format would be best as it offers a smooth and flawless post-production experience without giving much overhead to the processor.

• Lossless Compressed Audio

If your audiences own highly sophisticated audio players with Hi-Fi speaker systems, and they are also good at recognizing and understanding the differences between poor and optimal audio quality, using lossless compressed audio format would be a good choice as it gives decent sound quality in smaller file size.

• Compressed Audio

If you are preparing a media for home users and casual listeners, you can safely use an audio format that has been prepared using a higher compression ratio. In such a scenario, MP3 is the best audio format that not only offers the decent sound quality, it also occupies less amount of space on your storage media, thus enabling you to save more files at a given time.

Part 3: Which Audio File Formats Does YouTube Support?

At the time of this writing, YouTube supports two types of formats namely MPEG-2 and MPEG-4. Although both of these are video containers, they also hold audio files. Details about both these types are as follows:

• MPEG-2
  • Audio Bitrate: 128kbps or above
  • Audio Codec: Dolby AC-3 or MPEG Layer II
• MPEG-4
  • **Video Codec:**264
  • Audio Bitrate: 128kbps or above

Since many people nowadays produce videos in MP4 due to its wide range of supported devices and players and the fact that the container is used by majority of users worldwide, MPEG-4 with audio format could be mostly seen on YouTube.

Part 4: Audio Format in Filmora

Being one of the most versatile post-production tools preferred by many professional editors worldwide, Filmora comes with a variety of audio formats from all the three categories discussed above. Furthermore, Filmora also displays relevant information about each of the file types it offers.

The following table shows a list of formats and the details that Filmora supports:

Video Format	Corresponding Audio Encoder	Audio Type
MP4	Lossy Compressed
WMV	WMA8, WMA9	Uncompressed
AVI	MP3, PCM	Lossy Compressed, Uncompressed
MOV	Lossy Compressed
F4V	Lossy Compressed
MKV	MP3	Lossy Compressed
TS	MPEG-2 Audio	Lossy Compressed
3GP	Lossy Compressed
MPEG-2	MPEG-2 Audio	Lossy Compressed
WEBM	Vorbis	Lossy Compressed

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The quality of sound that you hear depends on various factors, and an appropriate audio format is one of them. While each type of acoustic file has its own significance, choosing the best audio format as per the target player, expected audience, and/or supporting videos or images (if any) is something that needs much consideration to offer a flawless listening experience.

With that said, here you will learn about some of the most common sound file types, which among them could be the best audio format according to your requirements, and a couple of important points that you must keep in might while picking an extension for your media preparations.

• Part 1: 10 Most Common Audio Formats
• Part 2: How to Choose Best Audio Format?
• Part 3: Which Audio File Formats Does YouTube Support?
• Part 4: Audio Format in Filmora

Using Filmora to Record & Edit & Save Audio Easily

Wondershare Filmora is a simple yet robust video editing software that allows you to save a video to mp3 easily. Besides, if you want to remove background noise from audio, or change the audio volume or remove unwanted audio parts from the video, you should definitely try Filmora.

---

Part 1: 10 Most Common Audio Formats

Before listing the most common audio file formats, it is important to understand the categories of the sound files. Every audio format that exists belongs to one (or more) category depending on the way it is being created and the characteristics it has.

In a nutshell, there are three major categories, including:

• Uncompressed Audio Format
• Lossless Compressed Audio Format
• Lossy Compressed Audio Format

Below is a brief introduction of each of the classes listed above along with the audio file types that belong to them:

1. Uncompressed Audio Format

Uncompressed audio is the original sound that has been recorded directly from the source in the analog form, and then converted to a digital signal without any modifications or compressions. Because an uncompressed sound is prepared with no retouching or manipulations, it gives an as-is listening experience. Since no compression is done on such a file either, it occupies a remarkably huge amount of space on your storage media.

Some sound files that fall under this category include:

1) Pulse-Code Modulation (PCM)

A PCM file is the digital version of an analog waveform that is created by recording the audio samples, technically known as pulses. The PCM format is mostly used when creating optical media discs, typically the CDs and DVDs.

2) Waveform Audio File Format (WAV)

Generally used on the Windows platform, this audio format is not a file itself but a container that may contain both compressed or uncompressed files. However, in most cases, it is the latter that a WAV file has, and PCM format is one of them.

You may also interest: YouTube to WAV >>

3) Audio Interchange File Format (AIFF)

AIFF is almost identical to WAV format in its characteristics with the only difference that, unlike the latter, it was developed by Apple somewhere in 1988, and works as a container for both compressed and uncompressed audio files. While the compressed version of the format is called AIFF-C, the term Apple Loop is used when the scenario is otherwise. As it is with WAV, even AIFF files mostly contain uncompressed audio, that usually is PCM.

You may also like: Best AIFF to MP3 Converters >>

4) Data Stream Digital (DSD)

Used by Sony and Phillips, DSD is also not a format itself but a container that can store PCM files to provide decent sound quality. However, due to distortions in the composed audio, DSD files are not much in trend.

2. Lossless Compressed Audio Format

Lossless Compressed audio format is a type of file that is compressed using some advanced methods without compromising with the quality of the sound. This means that when played, you experience the same acoustic excellence as that of the source, i.e. uncompressed audio. However, even though the lossless compressed files are comparatively small in size, they still occupy decent amount of space on the hard drive or any other storage media in use.

Some formats that fall under the lossless compressed category include:

1) Free Lossless Audio Code (FLAC)

At around half the size of the source sound file, FLAC offers the original audio quality without removing any acoustic information during compression. Being an opensource and royalty-free audio format, FLAC is even easier to get, and in most cases is used as an alternative to MP3.

Check some of the best FLAC editor programs >>

2) Apple Lossless Audio Codec (ALAC)

Introduced by Apple Inc. and initially released as a proprietary product, ALAC was made royalty-free and opensource in 2011. Even though ALAC files are larger in size when compared to FLAC, the former format is used in iTunes and iOS as the latter isn’t supported by these platforms.

3. Lossy Compressed Audio Format

These are the highly compressed files that occupy significantly less amount of space on your storage media. However, during the compression process, some acoustic information is lost in order to reduce the file size. Nevertheless, if compressed correctly, the deterioration in the quality is almost negligible, and cannot be experienced unless the listener is quite experienced and the source recording is played next to the compressed audio simultaneously.

Some audio formats that fall under the lossy compressed category include:

1) MPEG-1 Audio Layer 3 (MP3)

This is one of the most common file types and the best audio format for almost all media types that have sound. An MP3 file is free from the noises of the least significant in the composed audio. In addition, all the acoustic information with the frequency that normal human beings fail to catch (below 20Hz and above 20000Hz) is safely erased during compilation and compression. Furthermore, what makes MP3 the best audio file format is its ability to accommodate with almost all the devices of nearly any platform such as Android, Windows, iOS, Mac, etc.

Check this MP3 editor and convert video to MP3 easily.

2) OGG

This one, again, is not in fact an audio format but is a container for audio that generally stores Vorbis files. Although OGG files are way advanced in terms of sound quality and even offer higher compression ratio when compared with MP3, they are not much in use as many platforms and devices don’t support the format till date.

3) AU

AU is a format by Sun, DEC, and NeXT. It is yet another container that can hold both lossless and lossy files. AU files are mostly used in UNIX.

What’s the difference between common audio file formats like MP3, WAV, and FLAC? Watch the video below to learn more.

---

Part 2: How to Choose Best Audio Format?

If you are a media creator, and are into the business of preparing audio and video content for your clients or directly for the audience, it is imperative to understand what could be the best audio file format to compose the audiovisual files. Here are a few tips that you must keep in mind in this context before proceeding:

• Uncompressed Audio

If the media type you are about to create is expected to be used for further editing before exporting to a different format, using an uncompressed audio format would be best as it offers a smooth and flawless post-production experience without giving much overhead to the processor.

• Lossless Compressed Audio

If your audiences own highly sophisticated audio players with Hi-Fi speaker systems, and they are also good at recognizing and understanding the differences between poor and optimal audio quality, using lossless compressed audio format would be a good choice as it gives decent sound quality in smaller file size.

• Compressed Audio

If you are preparing a media for home users and casual listeners, you can safely use an audio format that has been prepared using a higher compression ratio. In such a scenario, MP3 is the best audio format that not only offers the decent sound quality, it also occupies less amount of space on your storage media, thus enabling you to save more files at a given time.

Part 3: Which Audio File Formats Does YouTube Support?

At the time of this writing, YouTube supports two types of formats namely MPEG-2 and MPEG-4. Although both of these are video containers, they also hold audio files. Details about both these types are as follows:

• MPEG-2
  • Audio Bitrate: 128kbps or above
  • Audio Codec: Dolby AC-3 or MPEG Layer II
• MPEG-4
  • **Video Codec:**264
  • Audio Bitrate: 128kbps or above

Since many people nowadays produce videos in MP4 due to its wide range of supported devices and players and the fact that the container is used by majority of users worldwide, MPEG-4 with audio format could be mostly seen on YouTube.

Part 4: Audio Format in Filmora

Being one of the most versatile post-production tools preferred by many professional editors worldwide, Filmora comes with a variety of audio formats from all the three categories discussed above. Furthermore, Filmora also displays relevant information about each of the file types it offers.

The following table shows a list of formats and the details that Filmora supports:

Video Format	Corresponding Audio Encoder	Audio Type
MP4	Lossy Compressed
WMV	WMA8, WMA9	Uncompressed
AVI	MP3, PCM	Lossy Compressed, Uncompressed
MOV	Lossy Compressed
F4V	Lossy Compressed
MKV	MP3	Lossy Compressed
TS	MPEG-2 Audio	Lossy Compressed
3GP	Lossy Compressed
MPEG-2	MPEG-2 Audio	Lossy Compressed
WEBM	Vorbis	Lossy Compressed

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The quality of sound that you hear depends on various factors, and an appropriate audio format is one of them. While each type of acoustic file has its own significance, choosing the best audio format as per the target player, expected audience, and/or supporting videos or images (if any) is something that needs much consideration to offer a flawless listening experience.

With that said, here you will learn about some of the most common sound file types, which among them could be the best audio format according to your requirements, and a couple of important points that you must keep in might while picking an extension for your media preparations.

• Part 1: 10 Most Common Audio Formats
• Part 2: How to Choose Best Audio Format?
• Part 3: Which Audio File Formats Does YouTube Support?
• Part 4: Audio Format in Filmora

Using Filmora to Record & Edit & Save Audio Easily

Wondershare Filmora is a simple yet robust video editing software that allows you to save a video to mp3 easily. Besides, if you want to remove background noise from audio, or change the audio volume or remove unwanted audio parts from the video, you should definitely try Filmora.

---

Part 1: 10 Most Common Audio Formats

Before listing the most common audio file formats, it is important to understand the categories of the sound files. Every audio format that exists belongs to one (or more) category depending on the way it is being created and the characteristics it has.

In a nutshell, there are three major categories, including:

• Uncompressed Audio Format
• Lossless Compressed Audio Format
• Lossy Compressed Audio Format

Below is a brief introduction of each of the classes listed above along with the audio file types that belong to them:

1. Uncompressed Audio Format

Uncompressed audio is the original sound that has been recorded directly from the source in the analog form, and then converted to a digital signal without any modifications or compressions. Because an uncompressed sound is prepared with no retouching or manipulations, it gives an as-is listening experience. Since no compression is done on such a file either, it occupies a remarkably huge amount of space on your storage media.

Some sound files that fall under this category include:

1) Pulse-Code Modulation (PCM)

A PCM file is the digital version of an analog waveform that is created by recording the audio samples, technically known as pulses. The PCM format is mostly used when creating optical media discs, typically the CDs and DVDs.

2) Waveform Audio File Format (WAV)

Generally used on the Windows platform, this audio format is not a file itself but a container that may contain both compressed or uncompressed files. However, in most cases, it is the latter that a WAV file has, and PCM format is one of them.

You may also interest: YouTube to WAV >>

3) Audio Interchange File Format (AIFF)

AIFF is almost identical to WAV format in its characteristics with the only difference that, unlike the latter, it was developed by Apple somewhere in 1988, and works as a container for both compressed and uncompressed audio files. While the compressed version of the format is called AIFF-C, the term Apple Loop is used when the scenario is otherwise. As it is with WAV, even AIFF files mostly contain uncompressed audio, that usually is PCM.

You may also like: Best AIFF to MP3 Converters >>

4) Data Stream Digital (DSD)

Used by Sony and Phillips, DSD is also not a format itself but a container that can store PCM files to provide decent sound quality. However, due to distortions in the composed audio, DSD files are not much in trend.

2. Lossless Compressed Audio Format

Lossless Compressed audio format is a type of file that is compressed using some advanced methods without compromising with the quality of the sound. This means that when played, you experience the same acoustic excellence as that of the source, i.e. uncompressed audio. However, even though the lossless compressed files are comparatively small in size, they still occupy decent amount of space on the hard drive or any other storage media in use.

Some formats that fall under the lossless compressed category include:

1) Free Lossless Audio Code (FLAC)

At around half the size of the source sound file, FLAC offers the original audio quality without removing any acoustic information during compression. Being an opensource and royalty-free audio format, FLAC is even easier to get, and in most cases is used as an alternative to MP3.

Check some of the best FLAC editor programs >>

2) Apple Lossless Audio Codec (ALAC)

Introduced by Apple Inc. and initially released as a proprietary product, ALAC was made royalty-free and opensource in 2011. Even though ALAC files are larger in size when compared to FLAC, the former format is used in iTunes and iOS as the latter isn’t supported by these platforms.

3. Lossy Compressed Audio Format

These are the highly compressed files that occupy significantly less amount of space on your storage media. However, during the compression process, some acoustic information is lost in order to reduce the file size. Nevertheless, if compressed correctly, the deterioration in the quality is almost negligible, and cannot be experienced unless the listener is quite experienced and the source recording is played next to the compressed audio simultaneously.

Some audio formats that fall under the lossy compressed category include:

1) MPEG-1 Audio Layer 3 (MP3)

This is one of the most common file types and the best audio format for almost all media types that have sound. An MP3 file is free from the noises of the least significant in the composed audio. In addition, all the acoustic information with the frequency that normal human beings fail to catch (below 20Hz and above 20000Hz) is safely erased during compilation and compression. Furthermore, what makes MP3 the best audio file format is its ability to accommodate with almost all the devices of nearly any platform such as Android, Windows, iOS, Mac, etc.

Check this MP3 editor and convert video to MP3 easily.

2) OGG

This one, again, is not in fact an audio format but is a container for audio that generally stores Vorbis files. Although OGG files are way advanced in terms of sound quality and even offer higher compression ratio when compared with MP3, they are not much in use as many platforms and devices don’t support the format till date.

3) AU

AU is a format by Sun, DEC, and NeXT. It is yet another container that can hold both lossless and lossy files. AU files are mostly used in UNIX.

What’s the difference between common audio file formats like MP3, WAV, and FLAC? Watch the video below to learn more.

---

Part 2: How to Choose Best Audio Format?

If you are a media creator, and are into the business of preparing audio and video content for your clients or directly for the audience, it is imperative to understand what could be the best audio file format to compose the audiovisual files. Here are a few tips that you must keep in mind in this context before proceeding:

• Uncompressed Audio

If the media type you are about to create is expected to be used for further editing before exporting to a different format, using an uncompressed audio format would be best as it offers a smooth and flawless post-production experience without giving much overhead to the processor.

• Lossless Compressed Audio

If your audiences own highly sophisticated audio players with Hi-Fi speaker systems, and they are also good at recognizing and understanding the differences between poor and optimal audio quality, using lossless compressed audio format would be a good choice as it gives decent sound quality in smaller file size.

• Compressed Audio

If you are preparing a media for home users and casual listeners, you can safely use an audio format that has been prepared using a higher compression ratio. In such a scenario, MP3 is the best audio format that not only offers the decent sound quality, it also occupies less amount of space on your storage media, thus enabling you to save more files at a given time.

Part 3: Which Audio File Formats Does YouTube Support?

At the time of this writing, YouTube supports two types of formats namely MPEG-2 and MPEG-4. Although both of these are video containers, they also hold audio files. Details about both these types are as follows:

• MPEG-2
  • Audio Bitrate: 128kbps or above
  • Audio Codec: Dolby AC-3 or MPEG Layer II
• MPEG-4
  • **Video Codec:**264
  • Audio Bitrate: 128kbps or above

Since many people nowadays produce videos in MP4 due to its wide range of supported devices and players and the fact that the container is used by majority of users worldwide, MPEG-4 with audio format could be mostly seen on YouTube.

Part 4: Audio Format in Filmora

Being one of the most versatile post-production tools preferred by many professional editors worldwide, Filmora comes with a variety of audio formats from all the three categories discussed above. Furthermore, Filmora also displays relevant information about each of the file types it offers.

The following table shows a list of formats and the details that Filmora supports:

Video Format	Corresponding Audio Encoder	Audio Type
MP4	Lossy Compressed
WMV	WMA8, WMA9	Uncompressed
AVI	MP3, PCM	Lossy Compressed, Uncompressed
MOV	Lossy Compressed
F4V	Lossy Compressed
MKV	MP3	Lossy Compressed
TS	MPEG-2 Audio	Lossy Compressed
3GP	Lossy Compressed
MPEG-2	MPEG-2 Audio	Lossy Compressed
WEBM	Vorbis	Lossy Compressed

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The quality of sound that you hear depends on various factors, and an appropriate audio format is one of them. While each type of acoustic file has its own significance, choosing the best audio format as per the target player, expected audience, and/or supporting videos or images (if any) is something that needs much consideration to offer a flawless listening experience.

With that said, here you will learn about some of the most common sound file types, which among them could be the best audio format according to your requirements, and a couple of important points that you must keep in might while picking an extension for your media preparations.

• Part 1: 10 Most Common Audio Formats
• Part 2: How to Choose Best Audio Format?
• Part 3: Which Audio File Formats Does YouTube Support?
• Part 4: Audio Format in Filmora

Using Filmora to Record & Edit & Save Audio Easily

Wondershare Filmora is a simple yet robust video editing software that allows you to save a video to mp3 easily. Besides, if you want to remove background noise from audio, or change the audio volume or remove unwanted audio parts from the video, you should definitely try Filmora.

---

Part 1: 10 Most Common Audio Formats

Before listing the most common audio file formats, it is important to understand the categories of the sound files. Every audio format that exists belongs to one (or more) category depending on the way it is being created and the characteristics it has.

In a nutshell, there are three major categories, including:

• Uncompressed Audio Format
• Lossless Compressed Audio Format
• Lossy Compressed Audio Format

Below is a brief introduction of each of the classes listed above along with the audio file types that belong to them:

1. Uncompressed Audio Format

Uncompressed audio is the original sound that has been recorded directly from the source in the analog form, and then converted to a digital signal without any modifications or compressions. Because an uncompressed sound is prepared with no retouching or manipulations, it gives an as-is listening experience. Since no compression is done on such a file either, it occupies a remarkably huge amount of space on your storage media.

Some sound files that fall under this category include:

1) Pulse-Code Modulation (PCM)

A PCM file is the digital version of an analog waveform that is created by recording the audio samples, technically known as pulses. The PCM format is mostly used when creating optical media discs, typically the CDs and DVDs.

2) Waveform Audio File Format (WAV)

Generally used on the Windows platform, this audio format is not a file itself but a container that may contain both compressed or uncompressed files. However, in most cases, it is the latter that a WAV file has, and PCM format is one of them.

You may also interest: YouTube to WAV >>

3) Audio Interchange File Format (AIFF)

AIFF is almost identical to WAV format in its characteristics with the only difference that, unlike the latter, it was developed by Apple somewhere in 1988, and works as a container for both compressed and uncompressed audio files. While the compressed version of the format is called AIFF-C, the term Apple Loop is used when the scenario is otherwise. As it is with WAV, even AIFF files mostly contain uncompressed audio, that usually is PCM.

You may also like: Best AIFF to MP3 Converters >>

4) Data Stream Digital (DSD)

Used by Sony and Phillips, DSD is also not a format itself but a container that can store PCM files to provide decent sound quality. However, due to distortions in the composed audio, DSD files are not much in trend.

2. Lossless Compressed Audio Format

Lossless Compressed audio format is a type of file that is compressed using some advanced methods without compromising with the quality of the sound. This means that when played, you experience the same acoustic excellence as that of the source, i.e. uncompressed audio. However, even though the lossless compressed files are comparatively small in size, they still occupy decent amount of space on the hard drive or any other storage media in use.

Some formats that fall under the lossless compressed category include:

1) Free Lossless Audio Code (FLAC)

At around half the size of the source sound file, FLAC offers the original audio quality without removing any acoustic information during compression. Being an opensource and royalty-free audio format, FLAC is even easier to get, and in most cases is used as an alternative to MP3.

Check some of the best FLAC editor programs >>

2) Apple Lossless Audio Codec (ALAC)

Introduced by Apple Inc. and initially released as a proprietary product, ALAC was made royalty-free and opensource in 2011. Even though ALAC files are larger in size when compared to FLAC, the former format is used in iTunes and iOS as the latter isn’t supported by these platforms.

3. Lossy Compressed Audio Format

These are the highly compressed files that occupy significantly less amount of space on your storage media. However, during the compression process, some acoustic information is lost in order to reduce the file size. Nevertheless, if compressed correctly, the deterioration in the quality is almost negligible, and cannot be experienced unless the listener is quite experienced and the source recording is played next to the compressed audio simultaneously.

Some audio formats that fall under the lossy compressed category include:

1) MPEG-1 Audio Layer 3 (MP3)

This is one of the most common file types and the best audio format for almost all media types that have sound. An MP3 file is free from the noises of the least significant in the composed audio. In addition, all the acoustic information with the frequency that normal human beings fail to catch (below 20Hz and above 20000Hz) is safely erased during compilation and compression. Furthermore, what makes MP3 the best audio file format is its ability to accommodate with almost all the devices of nearly any platform such as Android, Windows, iOS, Mac, etc.

Check this MP3 editor and convert video to MP3 easily.

2) OGG

This one, again, is not in fact an audio format but is a container for audio that generally stores Vorbis files. Although OGG files are way advanced in terms of sound quality and even offer higher compression ratio when compared with MP3, they are not much in use as many platforms and devices don’t support the format till date.

3) AU

AU is a format by Sun, DEC, and NeXT. It is yet another container that can hold both lossless and lossy files. AU files are mostly used in UNIX.

What’s the difference between common audio file formats like MP3, WAV, and FLAC? Watch the video below to learn more.

---

Part 2: How to Choose Best Audio Format?

If you are a media creator, and are into the business of preparing audio and video content for your clients or directly for the audience, it is imperative to understand what could be the best audio file format to compose the audiovisual files. Here are a few tips that you must keep in mind in this context before proceeding:

• Uncompressed Audio

If the media type you are about to create is expected to be used for further editing before exporting to a different format, using an uncompressed audio format would be best as it offers a smooth and flawless post-production experience without giving much overhead to the processor.

• Lossless Compressed Audio

If your audiences own highly sophisticated audio players with Hi-Fi speaker systems, and they are also good at recognizing and understanding the differences between poor and optimal audio quality, using lossless compressed audio format would be a good choice as it gives decent sound quality in smaller file size.

• Compressed Audio

If you are preparing a media for home users and casual listeners, you can safely use an audio format that has been prepared using a higher compression ratio. In such a scenario, MP3 is the best audio format that not only offers the decent sound quality, it also occupies less amount of space on your storage media, thus enabling you to save more files at a given time.

Part 3: Which Audio File Formats Does YouTube Support?

At the time of this writing, YouTube supports two types of formats namely MPEG-2 and MPEG-4. Although both of these are video containers, they also hold audio files. Details about both these types are as follows:

• MPEG-2
  • Audio Bitrate: 128kbps or above
  • Audio Codec: Dolby AC-3 or MPEG Layer II
• MPEG-4
  • **Video Codec:**264
  • Audio Bitrate: 128kbps or above

Since many people nowadays produce videos in MP4 due to its wide range of supported devices and players and the fact that the container is used by majority of users worldwide, MPEG-4 with audio format could be mostly seen on YouTube.

Part 4: Audio Format in Filmora

Being one of the most versatile post-production tools preferred by many professional editors worldwide, Filmora comes with a variety of audio formats from all the three categories discussed above. Furthermore, Filmora also displays relevant information about each of the file types it offers.

The following table shows a list of formats and the details that Filmora supports:

Video Format	Corresponding Audio Encoder	Audio Type
MP4	Lossy Compressed
WMV	WMA8, WMA9	Uncompressed
AVI	MP3, PCM	Lossy Compressed, Uncompressed
MOV	Lossy Compressed
F4V	Lossy Compressed
MKV	MP3	Lossy Compressed
TS	MPEG-2 Audio	Lossy Compressed
3GP	Lossy Compressed
MPEG-2	MPEG-2 Audio	Lossy Compressed
WEBM	Vorbis	Lossy Compressed

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

A Practical Approach to Balancing Loudness and Clarity with VLC Normalization

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

“Tech Tip: Turning Off Your Mic in Zoom Conferences Across Platforms”

Zoom Meeting is a beneficial application, and video conferencing is on another level because of this app. Zoom offers high-quality audio and video. With this conferencing app, cross-platform messaging is also possible, and you can also schedule your meeting calendar with Zoom.

Many offices conduct formal meetings through Zoom. During the pandemic era, online classes were taken through Zoom. Sometimes, you wish to mute the mic and sit back. What bothers you is that you don’t know how to mute audio in zoom. If this is your case, then stay with us. We are about to discuss how you can mute zoom audio.

In this article

01 How to Mute Zoom Audio on Windows and Mac

02 How to Mute Zoom Audio on iPhone and Android

03 Tips To Optimize Zoom Audio Settings for Better Performance

04 Frequently Asked Questions about Zoom

Part 1. How to Mute Zoom Audio on Windows and Mac

Imagine you are having a meeting on Zoom, and there are a lot of people in the meeting. You are trying to do some office work, but their voices disturb you. You cannot even leave the meeting. What are you going to do now? Are you going to submit average quality work?

One thing that you can do is to mute audio on Zoom. The question is, do you know how to mute the microphone on zoom? Let us share the steps that will help you to mute Zoom audio on your Windows or Mac.

Step 1: First of all, open the desktop Zoom app and start a call. Then, for the options to appear on the screen, you need to move the cursor.

Step 2: To mute any participant, bring the cursor over their name. The options will appear. You can click on the blue ‘Mute’ button to mute them. Or else, you can open a pop-up menu by right-clicking on the participants’ names. There, select the option of ‘Mute Audio.’ You can unmute them in the same way.

Step 3: If you are the meeting host, you can manage all participants at once. For that, look at the bottom toolbar hit the ‘Manage Participants’ tab. Zoom meeting will display the total count of the participants in a sidebar on the screen. Along with the participants’ names, a microphone and video icon will also appear.

Step 5: If you are the meeting host, then you can mute individual participants. You have to bring the cursor over the microphone icon. A ‘Mute’ and ‘Unmute’ buttons will show up.

Step 6: Being the host, you can ‘Mute All’ and ‘Unmute All’ participants at once by clicking on these buttons at the bottom. A pop-up will appear on the screen, don’t forget to check the box. With this, the participants can unmute themselves.

Step 7: Also, the participants receive a message if the host is muting or unmuting everyone. To complete the process and apply the changes, hit the ‘Continue’ button.

Part 2. How to Mute Zoom Audio on iPhone and Android

Zoom meeting is compatible with Windows, Mac, Android, and also iPhone. You don’t need to always join zoom meetings with your computer. Sometimes, you join zoom with your mobile. In any case, you might need to mute zoom audio. Sadly, you don’t know how to mute Zoom audio. Let us share an easy step-by-step guideline to do this on both Android and iPhone.

Step 1: If you want to mute the sound of your mobile device, then in the top left corner, tap on the volume button. You will see ‘X’ appears over the speaker icon. You can tap on it again to play the sound.

Step 2: Being the host, you can manage participants. For that, look at the bottom and click on the ‘Participants’ tab. A pop-up will appear on your screen, and you can individually mute participants. For this, you need to hit the microphone icon visible next to the participants’ names. You can easily reverse this and unmute it by tapping on the microphone icon again. You can also manage the settings by clicking on the participant’s name.

Step 3: The host has the authority to Mute all participants at once. For this, the host needs to tap on the ‘Mute All’ button from the bottom. The host needs to check the box. This will allow the participants to unmute themselves.

Step 4: Lastly, once you are done and satisfied with everything, hit the ‘Close’ option. This will close the participants’ window.

Part 3. Tips To Optimize Zoom Audio Settings for Better Performance

Although Zoom meeting is itself an amazing app with so many different features, among those features, one is that Zoom has high-quality video and audio. Besides everything, you can still improve Zoom Audio’s performance by following the tips that are shared below.

· Reduce Background Noise

Your audio performance is instantly improved if you reduce background noise. Any disturbing noise in the background falls under this category. It can be the fan, air conditioning, ticking clocks, etc. You should move away from the noise.

· Use High-Quality Microphone

For better audio performance, use a high-quality microphone for your Zoom meetings. This factor is the most important factor when it comes to improving audio. Investing in a decent and good external microphone is never a bad option.

· Stable Internet Connection

With a weak internet connection, your voice breaks. If you want to have improved Zoom audio performance, then make sure that you have a stable internet connection. Distortion and disturbance cause problems while communicating.

· Distance from Microphone

You must sit at an average distance from your microphone. Sitting too close will sound like you are shouting. Whereas sitting too far, your voice is quieter, and background noise sounds loud. So, measure the appropriate distance from the microphone.

Part 4. Frequently Asked Questions about Zoom

1. Can you mute Zoom audio without muting the computer?

Yes, you can mute zoom without muting your computer. For Windows, look at the bottom right corner. Right-click on the speaker/volume icon. A pop-up menu will appear; from there, select ‘Open Volume Mixer.’ When Volume Mixer appears on the screen, turn down and mute the volume for Zoom Meetings.

In case you are a Mac user, then let us tell you what to do. During the Zoom call, click on the Zoom Meetings Control for Audio. Then select the option of ‘Audio Settings.’ From the audio setting panel, you can turn down the volume for the ‘Speaker.’ This lowers the volume for Zoom meetings and can even mute it.

2. How can I improve my zoom video quality?

Various ways could be adopted to improve the video quality for Zoom meetings. For instance, you can use the ‘Touch up my Appearance’ feature. Or else, you can enable HD, apply Studio Effects, enable Zoom’s Low Light Adjustment setting, etc.

3. How do I change the resolution of a video Zoom?

For changing the resolution of Zoom video, firstly open Zoom on either your mobile or computer. Then, head over to the ‘Settings’ section. There, you need to select ‘Video Quality’ settings. Lastly, check the box with HD. This will enable the HD option, and your device will stream high-quality videos.

4. How do you set a virtual background on Zoom without a green screen?

For setting a virtual background on Zoom, you firstly need to sign in to your account. After that, you should open the ‘Settings’ by clicking on your profile picture. From settings, select ‘Virtual Background.’ Now, you can add the image that you want as your virtual background. You can even upload any image and video by hitting the ‘+’ sign.

5. Where do you get zoom backgrounds?

Zoom website offers a variety of cool virtual backgrounds. You can easily download them and use them. In comparison, there is another site that offers free backgrounds. You can also download virtual background images from Unsplash and use them easily.

Final Thoughts

Now are days, Zoom Meeting is being widely used. This article will surely increase your knowledge regarding Zoom Audio. We have shared the steps for both computer and mobile for Zoom mute microphone. We also shared tips that will help you improve the Zoom audio performance.

02 How to Mute Zoom Audio on iPhone and Android

03 Tips To Optimize Zoom Audio Settings for Better Performance

04 Frequently Asked Questions about Zoom

Part 1. How to Mute Zoom Audio on Windows and Mac

Imagine you are having a meeting on Zoom, and there are a lot of people in the meeting. You are trying to do some office work, but their voices disturb you. You cannot even leave the meeting. What are you going to do now? Are you going to submit average quality work?

One thing that you can do is to mute audio on Zoom. The question is, do you know how to mute the microphone on zoom? Let us share the steps that will help you to mute Zoom audio on your Windows or Mac.

Step 1: First of all, open the desktop Zoom app and start a call. Then, for the options to appear on the screen, you need to move the cursor.

Step 2: To mute any participant, bring the cursor over their name. The options will appear. You can click on the blue ‘Mute’ button to mute them. Or else, you can open a pop-up menu by right-clicking on the participants’ names. There, select the option of ‘Mute Audio.’ You can unmute them in the same way.

Step 3: If you are the meeting host, you can manage all participants at once. For that, look at the bottom toolbar hit the ‘Manage Participants’ tab. Zoom meeting will display the total count of the participants in a sidebar on the screen. Along with the participants’ names, a microphone and video icon will also appear.

Step 5: If you are the meeting host, then you can mute individual participants. You have to bring the cursor over the microphone icon. A ‘Mute’ and ‘Unmute’ buttons will show up.

Step 6: Being the host, you can ‘Mute All’ and ‘Unmute All’ participants at once by clicking on these buttons at the bottom. A pop-up will appear on the screen, don’t forget to check the box. With this, the participants can unmute themselves.

Step 7: Also, the participants receive a message if the host is muting or unmuting everyone. To complete the process and apply the changes, hit the ‘Continue’ button.

Part 2. How to Mute Zoom Audio on iPhone and Android

Zoom meeting is compatible with Windows, Mac, Android, and also iPhone. You don’t need to always join zoom meetings with your computer. Sometimes, you join zoom with your mobile. In any case, you might need to mute zoom audio. Sadly, you don’t know how to mute Zoom audio. Let us share an easy step-by-step guideline to do this on both Android and iPhone.

Step 1: If you want to mute the sound of your mobile device, then in the top left corner, tap on the volume button. You will see ‘X’ appears over the speaker icon. You can tap on it again to play the sound.

Step 2: Being the host, you can manage participants. For that, look at the bottom and click on the ‘Participants’ tab. A pop-up will appear on your screen, and you can individually mute participants. For this, you need to hit the microphone icon visible next to the participants’ names. You can easily reverse this and unmute it by tapping on the microphone icon again. You can also manage the settings by clicking on the participant’s name.

Step 3: The host has the authority to Mute all participants at once. For this, the host needs to tap on the ‘Mute All’ button from the bottom. The host needs to check the box. This will allow the participants to unmute themselves.

Step 4: Lastly, once you are done and satisfied with everything, hit the ‘Close’ option. This will close the participants’ window.

Part 3. Tips To Optimize Zoom Audio Settings for Better Performance

Although Zoom meeting is itself an amazing app with so many different features, among those features, one is that Zoom has high-quality video and audio. Besides everything, you can still improve Zoom Audio’s performance by following the tips that are shared below.

· Reduce Background Noise

Your audio performance is instantly improved if you reduce background noise. Any disturbing noise in the background falls under this category. It can be the fan, air conditioning, ticking clocks, etc. You should move away from the noise.

· Use High-Quality Microphone

For better audio performance, use a high-quality microphone for your Zoom meetings. This factor is the most important factor when it comes to improving audio. Investing in a decent and good external microphone is never a bad option.

· Stable Internet Connection

With a weak internet connection, your voice breaks. If you want to have improved Zoom audio performance, then make sure that you have a stable internet connection. Distortion and disturbance cause problems while communicating.

· Distance from Microphone

You must sit at an average distance from your microphone. Sitting too close will sound like you are shouting. Whereas sitting too far, your voice is quieter, and background noise sounds loud. So, measure the appropriate distance from the microphone.

Part 4. Frequently Asked Questions about Zoom

1. Can you mute Zoom audio without muting the computer?

Yes, you can mute zoom without muting your computer. For Windows, look at the bottom right corner. Right-click on the speaker/volume icon. A pop-up menu will appear; from there, select ‘Open Volume Mixer.’ When Volume Mixer appears on the screen, turn down and mute the volume for Zoom Meetings.

In case you are a Mac user, then let us tell you what to do. During the Zoom call, click on the Zoom Meetings Control for Audio. Then select the option of ‘Audio Settings.’ From the audio setting panel, you can turn down the volume for the ‘Speaker.’ This lowers the volume for Zoom meetings and can even mute it.

2. How can I improve my zoom video quality?

Various ways could be adopted to improve the video quality for Zoom meetings. For instance, you can use the ‘Touch up my Appearance’ feature. Or else, you can enable HD, apply Studio Effects, enable Zoom’s Low Light Adjustment setting, etc.

3. How do I change the resolution of a video Zoom?

For changing the resolution of Zoom video, firstly open Zoom on either your mobile or computer. Then, head over to the ‘Settings’ section. There, you need to select ‘Video Quality’ settings. Lastly, check the box with HD. This will enable the HD option, and your device will stream high-quality videos.

4. How do you set a virtual background on Zoom without a green screen?

For setting a virtual background on Zoom, you firstly need to sign in to your account. After that, you should open the ‘Settings’ by clicking on your profile picture. From settings, select ‘Virtual Background.’ Now, you can add the image that you want as your virtual background. You can even upload any image and video by hitting the ‘+’ sign.

5. Where do you get zoom backgrounds?

Zoom website offers a variety of cool virtual backgrounds. You can easily download them and use them. In comparison, there is another site that offers free backgrounds. You can also download virtual background images from Unsplash and use them easily.

Final Thoughts

Now are days, Zoom Meeting is being widely used. This article will surely increase your knowledge regarding Zoom Audio. We have shared the steps for both computer and mobile for Zoom mute microphone. We also shared tips that will help you improve the Zoom audio performance.

02 How to Mute Zoom Audio on iPhone and Android

03 Tips To Optimize Zoom Audio Settings for Better Performance

04 Frequently Asked Questions about Zoom

Part 1. How to Mute Zoom Audio on Windows and Mac

Imagine you are having a meeting on Zoom, and there are a lot of people in the meeting. You are trying to do some office work, but their voices disturb you. You cannot even leave the meeting. What are you going to do now? Are you going to submit average quality work?

One thing that you can do is to mute audio on Zoom. The question is, do you know how to mute the microphone on zoom? Let us share the steps that will help you to mute Zoom audio on your Windows or Mac.

Step 1: First of all, open the desktop Zoom app and start a call. Then, for the options to appear on the screen, you need to move the cursor.

Step 2: To mute any participant, bring the cursor over their name. The options will appear. You can click on the blue ‘Mute’ button to mute them. Or else, you can open a pop-up menu by right-clicking on the participants’ names. There, select the option of ‘Mute Audio.’ You can unmute them in the same way.

Step 3: If you are the meeting host, you can manage all participants at once. For that, look at the bottom toolbar hit the ‘Manage Participants’ tab. Zoom meeting will display the total count of the participants in a sidebar on the screen. Along with the participants’ names, a microphone and video icon will also appear.

Step 5: If you are the meeting host, then you can mute individual participants. You have to bring the cursor over the microphone icon. A ‘Mute’ and ‘Unmute’ buttons will show up.

Step 6: Being the host, you can ‘Mute All’ and ‘Unmute All’ participants at once by clicking on these buttons at the bottom. A pop-up will appear on the screen, don’t forget to check the box. With this, the participants can unmute themselves.

Step 7: Also, the participants receive a message if the host is muting or unmuting everyone. To complete the process and apply the changes, hit the ‘Continue’ button.

Part 2. How to Mute Zoom Audio on iPhone and Android

Zoom meeting is compatible with Windows, Mac, Android, and also iPhone. You don’t need to always join zoom meetings with your computer. Sometimes, you join zoom with your mobile. In any case, you might need to mute zoom audio. Sadly, you don’t know how to mute Zoom audio. Let us share an easy step-by-step guideline to do this on both Android and iPhone.

Step 1: If you want to mute the sound of your mobile device, then in the top left corner, tap on the volume button. You will see ‘X’ appears over the speaker icon. You can tap on it again to play the sound.

Step 2: Being the host, you can manage participants. For that, look at the bottom and click on the ‘Participants’ tab. A pop-up will appear on your screen, and you can individually mute participants. For this, you need to hit the microphone icon visible next to the participants’ names. You can easily reverse this and unmute it by tapping on the microphone icon again. You can also manage the settings by clicking on the participant’s name.

Step 3: The host has the authority to Mute all participants at once. For this, the host needs to tap on the ‘Mute All’ button from the bottom. The host needs to check the box. This will allow the participants to unmute themselves.

Step 4: Lastly, once you are done and satisfied with everything, hit the ‘Close’ option. This will close the participants’ window.

Part 3. Tips To Optimize Zoom Audio Settings for Better Performance

Although Zoom meeting is itself an amazing app with so many different features, among those features, one is that Zoom has high-quality video and audio. Besides everything, you can still improve Zoom Audio’s performance by following the tips that are shared below.

· Reduce Background Noise

Your audio performance is instantly improved if you reduce background noise. Any disturbing noise in the background falls under this category. It can be the fan, air conditioning, ticking clocks, etc. You should move away from the noise.

· Use High-Quality Microphone

For better audio performance, use a high-quality microphone for your Zoom meetings. This factor is the most important factor when it comes to improving audio. Investing in a decent and good external microphone is never a bad option.

· Stable Internet Connection

With a weak internet connection, your voice breaks. If you want to have improved Zoom audio performance, then make sure that you have a stable internet connection. Distortion and disturbance cause problems while communicating.

· Distance from Microphone

You must sit at an average distance from your microphone. Sitting too close will sound like you are shouting. Whereas sitting too far, your voice is quieter, and background noise sounds loud. So, measure the appropriate distance from the microphone.

Part 4. Frequently Asked Questions about Zoom

1. Can you mute Zoom audio without muting the computer?

Yes, you can mute zoom without muting your computer. For Windows, look at the bottom right corner. Right-click on the speaker/volume icon. A pop-up menu will appear; from there, select ‘Open Volume Mixer.’ When Volume Mixer appears on the screen, turn down and mute the volume for Zoom Meetings.

In case you are a Mac user, then let us tell you what to do. During the Zoom call, click on the Zoom Meetings Control for Audio. Then select the option of ‘Audio Settings.’ From the audio setting panel, you can turn down the volume for the ‘Speaker.’ This lowers the volume for Zoom meetings and can even mute it.

2. How can I improve my zoom video quality?

Various ways could be adopted to improve the video quality for Zoom meetings. For instance, you can use the ‘Touch up my Appearance’ feature. Or else, you can enable HD, apply Studio Effects, enable Zoom’s Low Light Adjustment setting, etc.

3. How do I change the resolution of a video Zoom?

For changing the resolution of Zoom video, firstly open Zoom on either your mobile or computer. Then, head over to the ‘Settings’ section. There, you need to select ‘Video Quality’ settings. Lastly, check the box with HD. This will enable the HD option, and your device will stream high-quality videos.

4. How do you set a virtual background on Zoom without a green screen?

For setting a virtual background on Zoom, you firstly need to sign in to your account. After that, you should open the ‘Settings’ by clicking on your profile picture. From settings, select ‘Virtual Background.’ Now, you can add the image that you want as your virtual background. You can even upload any image and video by hitting the ‘+’ sign.

5. Where do you get zoom backgrounds?

Zoom website offers a variety of cool virtual backgrounds. You can easily download them and use them. In comparison, there is another site that offers free backgrounds. You can also download virtual background images from Unsplash and use them easily.

Final Thoughts

Now are days, Zoom Meeting is being widely used. This article will surely increase your knowledge regarding Zoom Audio. We have shared the steps for both computer and mobile for Zoom mute microphone. We also shared tips that will help you improve the Zoom audio performance.

02 How to Mute Zoom Audio on iPhone and Android

03 Tips To Optimize Zoom Audio Settings for Better Performance

04 Frequently Asked Questions about Zoom

Part 1. How to Mute Zoom Audio on Windows and Mac

Imagine you are having a meeting on Zoom, and there are a lot of people in the meeting. You are trying to do some office work, but their voices disturb you. You cannot even leave the meeting. What are you going to do now? Are you going to submit average quality work?

One thing that you can do is to mute audio on Zoom. The question is, do you know how to mute the microphone on zoom? Let us share the steps that will help you to mute Zoom audio on your Windows or Mac.

Step 1: First of all, open the desktop Zoom app and start a call. Then, for the options to appear on the screen, you need to move the cursor.

Step 2: To mute any participant, bring the cursor over their name. The options will appear. You can click on the blue ‘Mute’ button to mute them. Or else, you can open a pop-up menu by right-clicking on the participants’ names. There, select the option of ‘Mute Audio.’ You can unmute them in the same way.

Step 3: If you are the meeting host, you can manage all participants at once. For that, look at the bottom toolbar hit the ‘Manage Participants’ tab. Zoom meeting will display the total count of the participants in a sidebar on the screen. Along with the participants’ names, a microphone and video icon will also appear.

Step 5: If you are the meeting host, then you can mute individual participants. You have to bring the cursor over the microphone icon. A ‘Mute’ and ‘Unmute’ buttons will show up.

Step 6: Being the host, you can ‘Mute All’ and ‘Unmute All’ participants at once by clicking on these buttons at the bottom. A pop-up will appear on the screen, don’t forget to check the box. With this, the participants can unmute themselves.

Step 7: Also, the participants receive a message if the host is muting or unmuting everyone. To complete the process and apply the changes, hit the ‘Continue’ button.

Part 2. How to Mute Zoom Audio on iPhone and Android

Zoom meeting is compatible with Windows, Mac, Android, and also iPhone. You don’t need to always join zoom meetings with your computer. Sometimes, you join zoom with your mobile. In any case, you might need to mute zoom audio. Sadly, you don’t know how to mute Zoom audio. Let us share an easy step-by-step guideline to do this on both Android and iPhone.

Step 1: If you want to mute the sound of your mobile device, then in the top left corner, tap on the volume button. You will see ‘X’ appears over the speaker icon. You can tap on it again to play the sound.

Step 2: Being the host, you can manage participants. For that, look at the bottom and click on the ‘Participants’ tab. A pop-up will appear on your screen, and you can individually mute participants. For this, you need to hit the microphone icon visible next to the participants’ names. You can easily reverse this and unmute it by tapping on the microphone icon again. You can also manage the settings by clicking on the participant’s name.

Step 3: The host has the authority to Mute all participants at once. For this, the host needs to tap on the ‘Mute All’ button from the bottom. The host needs to check the box. This will allow the participants to unmute themselves.

Step 4: Lastly, once you are done and satisfied with everything, hit the ‘Close’ option. This will close the participants’ window.

Part 3. Tips To Optimize Zoom Audio Settings for Better Performance

Although Zoom meeting is itself an amazing app with so many different features, among those features, one is that Zoom has high-quality video and audio. Besides everything, you can still improve Zoom Audio’s performance by following the tips that are shared below.

· Reduce Background Noise

Your audio performance is instantly improved if you reduce background noise. Any disturbing noise in the background falls under this category. It can be the fan, air conditioning, ticking clocks, etc. You should move away from the noise.

· Use High-Quality Microphone

For better audio performance, use a high-quality microphone for your Zoom meetings. This factor is the most important factor when it comes to improving audio. Investing in a decent and good external microphone is never a bad option.

· Stable Internet Connection

With a weak internet connection, your voice breaks. If you want to have improved Zoom audio performance, then make sure that you have a stable internet connection. Distortion and disturbance cause problems while communicating.

· Distance from Microphone

You must sit at an average distance from your microphone. Sitting too close will sound like you are shouting. Whereas sitting too far, your voice is quieter, and background noise sounds loud. So, measure the appropriate distance from the microphone.

Part 4. Frequently Asked Questions about Zoom

1. Can you mute Zoom audio without muting the computer?

Yes, you can mute zoom without muting your computer. For Windows, look at the bottom right corner. Right-click on the speaker/volume icon. A pop-up menu will appear; from there, select ‘Open Volume Mixer.’ When Volume Mixer appears on the screen, turn down and mute the volume for Zoom Meetings.

In case you are a Mac user, then let us tell you what to do. During the Zoom call, click on the Zoom Meetings Control for Audio. Then select the option of ‘Audio Settings.’ From the audio setting panel, you can turn down the volume for the ‘Speaker.’ This lowers the volume for Zoom meetings and can even mute it.

2. How can I improve my zoom video quality?

Various ways could be adopted to improve the video quality for Zoom meetings. For instance, you can use the ‘Touch up my Appearance’ feature. Or else, you can enable HD, apply Studio Effects, enable Zoom’s Low Light Adjustment setting, etc.

3. How do I change the resolution of a video Zoom?

For changing the resolution of Zoom video, firstly open Zoom on either your mobile or computer. Then, head over to the ‘Settings’ section. There, you need to select ‘Video Quality’ settings. Lastly, check the box with HD. This will enable the HD option, and your device will stream high-quality videos.

4. How do you set a virtual background on Zoom without a green screen?

For setting a virtual background on Zoom, you firstly need to sign in to your account. After that, you should open the ‘Settings’ by clicking on your profile picture. From settings, select ‘Virtual Background.’ Now, you can add the image that you want as your virtual background. You can even upload any image and video by hitting the ‘+’ sign.

5. Where do you get zoom backgrounds?

Zoom website offers a variety of cool virtual backgrounds. You can easily download them and use them. In comparison, there is another site that offers free backgrounds. You can also download virtual background images from Unsplash and use them easily.

Final Thoughts

Now are days, Zoom Meeting is being widely used. This article will surely increase your knowledge regarding Zoom Audio. We have shared the steps for both computer and mobile for Zoom mute microphone. We also shared tips that will help you improve the Zoom audio performance.

Also read: