Cutting-Edge Audio Mastery: Expert Tips for Implementing Gradual Sound Diminishment & Augmentation in Adobe After Effects

How to Fade In and Fade Out Audio in Adobe After Effects

Benjamin Arango

Mar 27, 2024• Proven solutions

Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.

However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.

Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>

Adding the Fade In and Fade Out Effects to Audio Files in AE

Step 1: Check audio waveform in After Effects

Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.

Step 2: Add a keyframe to the audio file

The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .

You may also like: 15 Free After Effects Templates to Power up Your Video

Step 3: Complete Fade out/in audio in After Effects

Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.

Tips For Making Better Fade In and Fade Out Effects

The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.

1. Avoid Hard Cuts

A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.

You may also like: How to Cut Video in After Effects

2. Be Mindful of Audio Compression

Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.

3. Use the Fade In and Fade Out Effects Creatively

Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.

Conclusion

Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.

If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.

However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.

Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>

Adding the Fade In and Fade Out Effects to Audio Files in AE

Step 1: Check audio waveform in After Effects

Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.

Step 2: Add a keyframe to the audio file

The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .

You may also like: 15 Free After Effects Templates to Power up Your Video

Step 3: Complete Fade out/in audio in After Effects

Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.

Tips For Making Better Fade In and Fade Out Effects

The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.

1. Avoid Hard Cuts

A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.

You may also like: How to Cut Video in After Effects

2. Be Mindful of Audio Compression

Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.

3. Use the Fade In and Fade Out Effects Creatively

Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.

Conclusion

Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.

If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.

However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.

Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>

Adding the Fade In and Fade Out Effects to Audio Files in AE

Step 1: Check audio waveform in After Effects

Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.

Step 2: Add a keyframe to the audio file

The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .

You may also like: 15 Free After Effects Templates to Power up Your Video

Step 3: Complete Fade out/in audio in After Effects

Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.

Tips For Making Better Fade In and Fade Out Effects

The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.

1. Avoid Hard Cuts

A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.

You may also like: How to Cut Video in After Effects

2. Be Mindful of Audio Compression

Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.

3. Use the Fade In and Fade Out Effects Creatively

Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.

Conclusion

Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.

If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.

However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.

Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>

Adding the Fade In and Fade Out Effects to Audio Files in AE

Step 1: Check audio waveform in After Effects

Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.

Step 2: Add a keyframe to the audio file

The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .

You may also like: 15 Free After Effects Templates to Power up Your Video

Step 3: Complete Fade out/in audio in After Effects

Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.

Tips For Making Better Fade In and Fade Out Effects

The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.

1. Avoid Hard Cuts

A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.

You may also like: How to Cut Video in After Effects

2. Be Mindful of Audio Compression

Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.

3. Use the Fade In and Fade Out Effects Creatively

Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.

Conclusion

Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.

If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

“Rapid Resonance Refinement: Eliminating Static and Hum in Seconds”

It will be challenging to remove static noise from audio since the language is often muddled by ambient noise, such as the dreaded whirring of an air conditioning unit or fans. This can make it challenging to get good audio. It is common practice to eliminate background noise before recording and mixing sound effects or working on other areas of the video’s design.

You are lucky since the Internet allows you to choose a few strategies for removing noise from audio. You may lessen the amount of noise in your video or audio recording by including some background music or by utilizing software that edits audio or video. This article will significantly assist you in searching for a method to remove static sound from audio, so keep that in mind as you read it. Let’s get started!

Part 1: How to Remove Static Noise from Audio Files with Only & Free tools?

Consider shaky or unclear video to be a problem. Audio noise may damage your video just as fast as poor visual quality. It may be tricky to remove static sound from audio, however. Additionally, it might be difficult to capture clear audio, particularly in busy areas. There are occasions when you get hissy or otherwise noisy audio, whether because of background noise or less-than-ideal equipment.

1. Audiodenoise

The tool lets you change many things, like the time smoothing of the noise reduction filter, the noise model based on tracking noise modulation, the size of the analysis blocks, etc. So, how do you remove the static audio in the background?

Here are the steps to take.

How to use Audio Denoise to get rid of static noise

Step1 Click on the “Choose File” option to start. You can also choose the video from the list of “Demo files.”

Step2 Press the Process button after you’ve uploaded the file to eliminate the noise in the audio.

Step3 After the audio is done being processed, click the Download button to save your video to your PC.

2. Wondershare AILab

You may remove static from audio by using Wondershare AILab. There is no need to specify any settings since the AI will identify and eliminate noise on its own automatically. To improve audio quality, use a noise reduction technique based on AI. No more noise will be from the breeze, the crowd, or another unwelcome sound. AILab gives you access to various free online tools that make creating images, sounds, and videos simpler and more enjoyable.

How to use Wondershare AILab to remove static sound from audio

Step1 First, choose or drag your audio file to start uploading it.

Step2 The AI will analyze the file automatically and eliminate the static sound.

Step3 Finally, at this moment, download the revised audio file.

3. Veed.io

With VEED, you can simultaneously record your computer screen and camera, making it simple to produce instructional films for professional or personal use.

VEED is one of the most straightforward online video editors that can remove static from audio with just one click of the mouse, making it an excellent choice for people who are just starting. You don’t need to re-record your audio or purchase expensive microphones that block sound. It can help you eliminate background noise from MP3, WMA, and other audio files, but with a watermark.

How do I remove static sound from the audio file using Veed online?

Step1 To upload your audio file, click the “Choose Audio” button to upload your audio file.

Step2 Click on the audio track to open the Settings menu, then choose “Clean Audio” from the list of options. The background noise will vanish on its own in a few seconds.

Step3 That’s it; you’re done. When you click “Export,” you will make your new file in a few seconds.

Part 2: How to improve your audio in the best way?

Wondershare is the company that has produced the Filmora family of video production and editing apps. Filmora offers software that may be used by various skill levels, from novice to intermediate. A timeline, a preview window, and an effects library are some of the standard elements of Filmora. These features are accessed and controlled by a drag-and-drop user interface.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

The Filmora software collection may run on machines running either Windows or macOS operating systems. It is possible to get free product samples to test them out before buying them. On the official Filmora website, you can see pricing choices for each program.

The Filmora Video Editor is easy to use and delivers various features superior to those provided by other video editors. Because of this, it is considered one of the best audio editors to answer how to remove static from audio and video.

Here is how to remove static noise from audio with Filmora.

Step1 Upload Files

Open Wondershare Filmora and load your video into the timeline window. You can get a video preview, cut it up, and remove the bits you don’t want to preserve.

Step2 Edit Audio

Select “Edit Audio” by using the context menu after right-clicking the movie in the timeline. You will see four options: silence detection, modify audio, disconnect audio, and mute. Choose the “Audio” option from the drop-down menu if you want to separate the audio from the video.

Step3 Remove Background Static

Double-click on the audio track to eliminate the background noise directly, and pick “normal denoise” from the Edit Panel. You may also double-click the video clip in the timeline to reach the Editing panel without first separating the audio from the video. Once there, you can edit the audio and eliminate the noise by clicking on the Audio tab in the Editing panel.

Step4 Fine Tune and Export

Lastly, with Equalizer, fine-tune the sound to make it more natural. For a better effect, adjust the audio frame by frame until it fits perfectly with the video. After the result, you can click “Export” to save the less noisy video on your PC or directly post it to YouTube or Vimeo.

Part 3: How to Record Noise-Free Audio?

So, that was how to remove static sound from audio. But what if you record noise-free audio instead?

If you record with a microphone and continue to hear static noise, the problem most likely lies in the cable. Most microphone cables consist of one or two conductors (wires) braided together inside a metal. This is the function that protection fulfills. It prevents the hum or static created by signals coming from outside from interfering with the signal flowing via the internal conductors.

If one of the shield connections at either end of the wire is only sometimes present or isn’t there, this might produce static electricity. If you can access the connection, check that all cables and shields are connected safely and securely.

Near a stable electromagnetic source is another possible explanation for static, which may be industrial motors or high-power radio transmitters.

Another characteristic of microphones is their impedance. It would be best to use microphone with the same impedance as the recording device.

One last step is to test the static using a different microphone to determine whether the problem persists. If this is the case, the recording device can be the source of the issue.

Conclusion

Do you believe that a grainy or unsteady video is a problem? Video quality is vital, but audio noise can quickly damage your film. However, removing static sound from audio may be a pain in the neck. In addition, capturing clear audio may be challenging, particularly in areas with a lot of background noise.

Now you have an audio file with less or no noise and want to learn how to remove static noise from audio. With the above suggestions, I hope you’ll find eliminating background noise from the video easy. If you want to be more creative in removing static noise from audio, try the Filmora video editor to give your mind a boost.

Free Download For macOS 10.14 or later

The Filmora software collection may run on machines running either Windows or macOS operating systems. It is possible to get free product samples to test them out before buying them. On the official Filmora website, you can see pricing choices for each program.

The Filmora Video Editor is easy to use and delivers various features superior to those provided by other video editors. Because of this, it is considered one of the best audio editors to answer how to remove static from audio and video.

Here is how to remove static noise from audio with Filmora.

Step1 Upload Files

Open Wondershare Filmora and load your video into the timeline window. You can get a video preview, cut it up, and remove the bits you don’t want to preserve.

Step2 Edit Audio

Select “Edit Audio” by using the context menu after right-clicking the movie in the timeline. You will see four options: silence detection, modify audio, disconnect audio, and mute. Choose the “Audio” option from the drop-down menu if you want to separate the audio from the video.

Step3 Remove Background Static

Double-click on the audio track to eliminate the background noise directly, and pick “normal denoise” from the Edit Panel. You may also double-click the video clip in the timeline to reach the Editing panel without first separating the audio from the video. Once there, you can edit the audio and eliminate the noise by clicking on the Audio tab in the Editing panel.

Step4 Fine Tune and Export

Lastly, with Equalizer, fine-tune the sound to make it more natural. For a better effect, adjust the audio frame by frame until it fits perfectly with the video. After the result, you can click “Export” to save the less noisy video on your PC or directly post it to YouTube or Vimeo.

Part 3: How to Record Noise-Free Audio?

So, that was how to remove static sound from audio. But what if you record noise-free audio instead?

If you record with a microphone and continue to hear static noise, the problem most likely lies in the cable. Most microphone cables consist of one or two conductors (wires) braided together inside a metal. This is the function that protection fulfills. It prevents the hum or static created by signals coming from outside from interfering with the signal flowing via the internal conductors.

If one of the shield connections at either end of the wire is only sometimes present or isn’t there, this might produce static electricity. If you can access the connection, check that all cables and shields are connected safely and securely.

Near a stable electromagnetic source is another possible explanation for static, which may be industrial motors or high-power radio transmitters.

Another characteristic of microphones is their impedance. It would be best to use microphone with the same impedance as the recording device.

One last step is to test the static using a different microphone to determine whether the problem persists. If this is the case, the recording device can be the source of the issue.

Conclusion

Do you believe that a grainy or unsteady video is a problem? Video quality is vital, but audio noise can quickly damage your film. However, removing static sound from audio may be a pain in the neck. In addition, capturing clear audio may be challenging, particularly in areas with a lot of background noise.

Now you have an audio file with less or no noise and want to learn how to remove static noise from audio. With the above suggestions, I hope you’ll find eliminating background noise from the video easy. If you want to be more creative in removing static noise from audio, try the Filmora video editor to give your mind a boost.

Audio Integration in Motion Picture Editing: A Step-by-Step Approach

Whether you are making a casual video for sharing with friends or making something much more complex for uploading on social media, all videos are not complete without the right music. While you can easily find the right song and music, you may get confused when you want to put music behind video that you may want to upload on social media. Thus, we are here with a complete detailed guide on how to put music over a video. To help you in easily learning how to put music behind a video, we have given multiple methods down below. This includes methods that need a computer, methods to put music on video online, methods on how to put music on Kinemaster, and much more.

In this article

01 [How to Put Music Over a Video?](#Part 1)

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Part 1 How to Put Music Over a Video?

#1) Put Music on Video with Filmora

If you are interested in learning how to put music on my video, then Filmora should be your first pick. This is due to the reason that it is one of the easiest to use video editors out there. And despite its basic user interface which is quite easy to use, it still offers a wide range of features and options.

You can find things like basic trim, cut, merge, and other tools along with advanced features like video effects, motion tracking, keyframing, audio processing, and much more making it the perfect video editor for computers. And since it has so many effects and options, you can also find the option to put music over a video inside Filmora. You can also learn how do you put music over a video using Filmora as given here:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More about Filmora>

● First, click on the Import option using the Media Library panel.

● Here, you have to browse, find, and select the music file that you wish to add to your video.

● Once you have selected the right music file, it will be added to the Media Library in Filmora after which you can drag the media file from the Media Library to the timeline audio tracks.

● In case you do not have your own music files, then you can also go to the Filmora media audio library which offers more than 50 free to use music tracks.

● After you have added music of your choice using your preferred method, you can double click on the audio track to adjust its volume, pitch, keyframes, and many other advanced settings.

● At last, export the video in your desired settings to apply music over your video files using Filmora.

#2) Put Music over Video with iMovie

Just as you can probably guess by its name, iMovie is a video editor made by Apple which is available on almost all of its devices. This means that you can have a similar editing experience on your iPhone, iPad, iMac, and more. While this software is not ideal for any kind of advanced and large scale video editing projects, it is certainly more than enough for adding music to video files. Despite lacking video effects or other advanced features, you do get basic options like trimming, cutting, cropping, adding music, adding text, and other basic yet important features. Hence, if you want to learn how can I put music over a video on any of your Apple devices for completely free, then you can go through these steps and instructions:

● Since iMovie is available for both mobile devices and computers, we will be first taking a look at adding music on mobile devices and then on computers.

● On your Apple mobile device, you need to press the Add Media button on the iMovie timeline where you need to select Audio and browse from the display list.

● You can then tap on the Add icon next to the music track that you want to add to your videos.

● Finally, move the music track under your video and trip it to your desired length before saving your video in a desired video format along with the music track under it.

#3) Put Music under video with Premiere Pro

When compared with other video editors out there, Premiere Pro by Adobe is used for all kinds of large scale products including Hollywood movies and TV shows. This is due to the reason that Adobe Premiere offers every possible feature that you can ever want in a video editor. Even though Adobe Premiere Pro is not free to use, it is still a great option for many users who want to edit videos more than just adding music files. Whether it is advanced video effects, plugins support, automated editing, extensive media support, color grading options, VFX support, compatibility with other Adobe tools, sound design, or anything else, Adobe Premiere Pro offers it all. As a result, if you want to use Premiere Pro for adding music to video files, then it can be done quite easily as described here:

● Even though the user interface of Adobe Premiere Pro can be a little intimidating, adding music in it is still quite easy.

● To start, go to the Media Browser in Adobe Premiere Pro to find and browse your desired music tracks.

● You can then right click on a music track and select Import to get the music track in the media library.

● Finally, you can open the Media Library and drag this music track onto your timeline where it can be moved under any video of your choice.

● If you want, you can select the music track and go to the Effects Control window to change the volume levels, pitch, keyframes, and apply all other kinds of music effects before saving your video with music under it.

#4) How to Put Music Over Video Online?

In case you just want to add music to video files without using or applying any more effects, then you don’t need to install any programs on your computer. Instead, you can use one of the various online video editors for putting music over videos. Such video editors are completely free and do not use your computer’s processor which makes them great for entry level computers which cannot run heavy video editing programs. Most of these online video editors are also quite easy to use with basic and simple user interfaces making them great for beginners. You can also put music over videos online using such video editors by going through this step by step guide:

● First, open the Audio to Video Tool by Online Converter in any web browser of your choice.

● Now, choose the video file and the audio file that you want to combine together into a single media file.

● You can also change settings like the position of the audio, its volume level, mute the video file, and many others.

● Once all settings are changed to your preferences, you can click on Add to save the video with music added to it.

#5) How to Put Music in Kinemaster?

While all the various video editor apps given above are great for easily adding music to videos, all of them require you to have a computer for using them. Unfortunately, not everyone has a computer which means that using the methods stated earlier might not be feasible. Thankfully, you can still put music on video files using your smartphone. This is made possible thanks to various video editors available for mobile devices out there. One such great video editor option that you can use on your mobile device is Kinemaster. Not only can it be used for adding music, but you can also use multiple video effects, add video layers, add text and images, use an inbuilt media library, and so much more. And if you just want to add music to videos, then you can use Kinemaster as given in these steps:

● Since Kinemasater is made for mobile devices, its user interface is quite simple and easy to use.

● You can simply click on the Audio button to import any music file that you want to add to your video.

● Finally, adjust the music track to any position of your choice by long pressing on it and save the video with music added to it.

Conclusion

There might be many cases where you would want to add music or a specific song to a video that you want to share with others. By adding such music to your videos, you can make much better videos quite easily. Once you have added music, sharing the video with your friends and on social media will be a much better experience. However, since you will need a video editor to add music, most of you will not know how to put music in your videos. Therefore, if you want to know how do I put music over a video, you can go through all the different methods given above. You can easily go through all these methods to easily learn how to music under a video for making much better videos for social media. You can also leave your thoughts and questions on how do you put music to a video in the comments section down below.

Also read: