“Top 5 Effective Complimentary Audio Level Optimizers”

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Discovering Elegant Sound Design Software: Highlights, Strengths, Weaknesses, and Competitive Overviews (2024 Release)

Audio editors are generally referred to as Digital Audio Workstation, DAW. They provide you with digital tools to edit, record, and also produce audio files. Most audio editors are used to create podcasts and mix different audio files.

Internet is full of different audio editors, but the case in the study is about Beautiful Audio Editor. To know more about this editor and to learn about its steps, read the article below.

In this article

01 What Is Beautiful Audio Editor?

02 Beautiful Audio Editor: Key Features, Pros & Cons

03 How to Use Beautiful Audio Editor?

04 Best Alternatives for Beautiful Audio Editor

Part 1. What Is Beautiful Audio Editor?

For an online editor, Beautiful Audio Editor is the best choice, and this is because the editor is feature-rich. This editor works well on both Chrome and Firefox browsers. Beautiful Audio Editor is great for the fact that it offers excellent options of frequency effects. Importantly, the audio editor allows you to save the files on Google Drive.

Do you know the best part of Beautiful Audio Editor? The editor supports multi-track editing and allows you to adjust and manage every track level. With this editor, try and move from complete silence to 6 decibels higher than the actual level. Do you know what wonders this can do? For smooth fade-ins and fade-outs, this is very helpful.

Part 2. Beautiful Audio Editor: Key Features, Pros & Cons

With Beautiful Audio Editor, you can edit amazing audio files, make stunning mixes and crazy podcasts. This online, easy-to-use editor has a lot of features to offer. Do you know what they are? Let’s increase your knowledge and share some key features of Beautiful Audio Editor:

· Editing Features

This is a multi-track audio editor that supports adjusting every level of each track. With Beautiful Audio Editor, try to alter volume and pan. Along with this, options like Move, Split, Duplicate and Delete sections of the audio file are also offered.

· Recording

Do you think Beautiful Audio Editor is just an editor? You are wrong if you think so. This is because the editor is not only great for editing but try and record with this fantastic tool. You can record through your microphone and get high-quality recordings.

· Effects

Beautiful Audio Editor provides a wide range of effects that can modify and transform your audio file. For instance, you get effects like Gain, Dynamic Compression, Reverb, Low/High pass filters. Along with all this, you can also speed up or slow down the audio.

· Customized Effects

Which audio editor offers customized effects? Beautiful Audio Editor does! With Volume Envelopes, you can create custom Fade Ins and Fade Outs. Moreover, the editor also provides features like dragging the effects, zooming, etc.

2.1. Pros & Cons of Beautiful Audio Editor

Do you have any idea about the benefits that you get from Beautiful Audio Editor? If you don’t, let’s enlighten you with this editor’s pros and cons.

Benefits

• You can export files both in 16-bit WAV and also in 128-bit MP3 format from Beautiful AudioEditor.
• This audio editor is free to use. You don’t even have to register for editing audio, just open Chrome or Firefox and start the work.
• Your edited audio files are saved both online and offline. You can either save files on Google Drive or else save local files.
• Beautiful Audio Editorenables you to create audio envelopes. Moreover, you can apply dozens of audio effects while editing.

Drawback

• A significant drawback of this editor is that it crashes if the project is over 300MB or 45mins. This is not reliable for high stake projects.

Part 3. How to Use Beautiful Audio Editor?

Have you ever used this editor before? As we mentioned in the introduction, we would introduce the steps to use Beautiful Audio Editor, so here we are. Are you ready to learn about its step-by-step guidelines? Let’s get started!

Step 1: To start the editing, open the online editor. A timeline screen will appear in front of you; head to the ‘File’ tab and click on it from the top menu bar. From the sub-menu, select the ‘Import local sound file’ option to import the file from your device.

Step 2: For splitting the audio, drag the play head to the point from where you want to split. Next to the toolbar, click on the ‘Split’ icon. This will split the audio into 2 parts, and you can split as much as you want to. By using the ‘Remove’ icon from the toolbar, you can also remove the extra audio part.

Step 3: For adding Fade to your audio, move to the line under the timeline. Now, select a start and an endpoint on the line and drag it downwards for Fade Out. In comparison, push it upwards for Fade In.

Step 4: For adjusting the Volume or the Gain, move to the bottom left corner. You will see a ‘Gain’ option, hit on it to open its tab on the right side of the screen, and then adjust the ‘Gain’ by moving the slider.

Step 5: You can also rename your file by double-clicking on it. Lastly, to save the file, tap on the ‘File’ tab and select the ‘Save project to a local file for later load’ option. After this, download the file to your preferred location.

Part 4. Best Alternatives for Beautiful Audio Editor

We have something for you if Beautiful Audio Editor has failed to impress you. The following section of this article will share the best alternatives with its readers. Let’s begin!

1. TwistedWave

Do you know how amazing this alternative is? TwistedWave is an online, easy-to-use audio editor. The interface of this editor is very clean and simple to understand. Moreover, you get a long list of effects from TwistedWave, for instance, Reverse, Graphic EQ, Fade in and Fade out, Amplify, Normalize, and others.

The best part about this audio editor is that you can easily send files to SoundCloud and also Google Drive. Likewise, you can upload files from both Google Drive and SoundCloud.

2. Bear Audio Editor

Moving on to discuss Bear Audio Editor, which can trim, cut, and also convert music files. Interestingly, you can avail all these amazing features online and free, without even downloading any software. This editor offers you options like Fade In and Out, Mute, Pitch and Volume Adjustment, etc.

You can also combine different music files, ringtones, etc., to make your perfect mix. Bear Audio Editor supports MP3, OGG, and WAV input formats. Whereas OGG, WMA, WAV, MP3, and M4R are output-supported formats.

3. Sodaphonic

Do you want to edit a file from Dropbox? Try Sodaphonic audio editor. You can not only open files from Dropbox but also import them from Google Drive. This online editor offers diverse options that include Louder, Quieter, Silence, Normalize, Bleep it, Reverse, and much more than this.

Other than this, you get different editing options, including Delete, Trim, Cut, Copy, etc. This editor also allows access to a microphone for recording.

Last Words

Beautiful Audio Editor, like its name, is beautiful and equally amazing to use. The online editor offers a lot of features, and interestingly, it’s free. The article discussed great details about Beautiful Audio Editor along with its guideline. What if we share another audio editor? Try Wondershare Filmora Audio Editor, the easy-to-use, drag-and-drop software.

You can modify your audio files to the next level with Filmora . Its advanced audio editing features are unmatched, like Audio Equalizer, Audio Denoise, Detach Audio from Video, and so much more. You can also add Voiceovers, replace original audio from video, add background music, etc.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More >

02 Beautiful Audio Editor: Key Features, Pros & Cons

03 How to Use Beautiful Audio Editor?

04 Best Alternatives for Beautiful Audio Editor

Part 1. What Is Beautiful Audio Editor?

For an online editor, Beautiful Audio Editor is the best choice, and this is because the editor is feature-rich. This editor works well on both Chrome and Firefox browsers. Beautiful Audio Editor is great for the fact that it offers excellent options of frequency effects. Importantly, the audio editor allows you to save the files on Google Drive.

Do you know the best part of Beautiful Audio Editor? The editor supports multi-track editing and allows you to adjust and manage every track level. With this editor, try and move from complete silence to 6 decibels higher than the actual level. Do you know what wonders this can do? For smooth fade-ins and fade-outs, this is very helpful.

Part 2. Beautiful Audio Editor: Key Features, Pros & Cons

With Beautiful Audio Editor, you can edit amazing audio files, make stunning mixes and crazy podcasts. This online, easy-to-use editor has a lot of features to offer. Do you know what they are? Let’s increase your knowledge and share some key features of Beautiful Audio Editor:

· Editing Features

This is a multi-track audio editor that supports adjusting every level of each track. With Beautiful Audio Editor, try to alter volume and pan. Along with this, options like Move, Split, Duplicate and Delete sections of the audio file are also offered.

· Recording

Do you think Beautiful Audio Editor is just an editor? You are wrong if you think so. This is because the editor is not only great for editing but try and record with this fantastic tool. You can record through your microphone and get high-quality recordings.

· Effects

Beautiful Audio Editor provides a wide range of effects that can modify and transform your audio file. For instance, you get effects like Gain, Dynamic Compression, Reverb, Low/High pass filters. Along with all this, you can also speed up or slow down the audio.

· Customized Effects

Which audio editor offers customized effects? Beautiful Audio Editor does! With Volume Envelopes, you can create custom Fade Ins and Fade Outs. Moreover, the editor also provides features like dragging the effects, zooming, etc.

2.1. Pros & Cons of Beautiful Audio Editor

Do you have any idea about the benefits that you get from Beautiful Audio Editor? If you don’t, let’s enlighten you with this editor’s pros and cons.

Benefits

• You can export files both in 16-bit WAV and also in 128-bit MP3 format from Beautiful AudioEditor.
• This audio editor is free to use. You don’t even have to register for editing audio, just open Chrome or Firefox and start the work.
• Your edited audio files are saved both online and offline. You can either save files on Google Drive or else save local files.
• Beautiful Audio Editorenables you to create audio envelopes. Moreover, you can apply dozens of audio effects while editing.

Drawback

• A significant drawback of this editor is that it crashes if the project is over 300MB or 45mins. This is not reliable for high stake projects.

Part 3. How to Use Beautiful Audio Editor?

Have you ever used this editor before? As we mentioned in the introduction, we would introduce the steps to use Beautiful Audio Editor, so here we are. Are you ready to learn about its step-by-step guidelines? Let’s get started!

Step 1: To start the editing, open the online editor. A timeline screen will appear in front of you; head to the ‘File’ tab and click on it from the top menu bar. From the sub-menu, select the ‘Import local sound file’ option to import the file from your device.

Step 2: For splitting the audio, drag the play head to the point from where you want to split. Next to the toolbar, click on the ‘Split’ icon. This will split the audio into 2 parts, and you can split as much as you want to. By using the ‘Remove’ icon from the toolbar, you can also remove the extra audio part.

Step 3: For adding Fade to your audio, move to the line under the timeline. Now, select a start and an endpoint on the line and drag it downwards for Fade Out. In comparison, push it upwards for Fade In.

Step 4: For adjusting the Volume or the Gain, move to the bottom left corner. You will see a ‘Gain’ option, hit on it to open its tab on the right side of the screen, and then adjust the ‘Gain’ by moving the slider.

Step 5: You can also rename your file by double-clicking on it. Lastly, to save the file, tap on the ‘File’ tab and select the ‘Save project to a local file for later load’ option. After this, download the file to your preferred location.

Part 4. Best Alternatives for Beautiful Audio Editor

We have something for you if Beautiful Audio Editor has failed to impress you. The following section of this article will share the best alternatives with its readers. Let’s begin!

1. TwistedWave

Do you know how amazing this alternative is? TwistedWave is an online, easy-to-use audio editor. The interface of this editor is very clean and simple to understand. Moreover, you get a long list of effects from TwistedWave, for instance, Reverse, Graphic EQ, Fade in and Fade out, Amplify, Normalize, and others.

The best part about this audio editor is that you can easily send files to SoundCloud and also Google Drive. Likewise, you can upload files from both Google Drive and SoundCloud.

2. Bear Audio Editor

Moving on to discuss Bear Audio Editor, which can trim, cut, and also convert music files. Interestingly, you can avail all these amazing features online and free, without even downloading any software. This editor offers you options like Fade In and Out, Mute, Pitch and Volume Adjustment, etc.

You can also combine different music files, ringtones, etc., to make your perfect mix. Bear Audio Editor supports MP3, OGG, and WAV input formats. Whereas OGG, WMA, WAV, MP3, and M4R are output-supported formats.

3. Sodaphonic

Do you want to edit a file from Dropbox? Try Sodaphonic audio editor. You can not only open files from Dropbox but also import them from Google Drive. This online editor offers diverse options that include Louder, Quieter, Silence, Normalize, Bleep it, Reverse, and much more than this.

Other than this, you get different editing options, including Delete, Trim, Cut, Copy, etc. This editor also allows access to a microphone for recording.

Last Words

Beautiful Audio Editor, like its name, is beautiful and equally amazing to use. The online editor offers a lot of features, and interestingly, it’s free. The article discussed great details about Beautiful Audio Editor along with its guideline. What if we share another audio editor? Try Wondershare Filmora Audio Editor, the easy-to-use, drag-and-drop software.

You can modify your audio files to the next level with Filmora . Its advanced audio editing features are unmatched, like Audio Equalizer, Audio Denoise, Detach Audio from Video, and so much more. You can also add Voiceovers, replace original audio from video, add background music, etc.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More >

02 Beautiful Audio Editor: Key Features, Pros & Cons

03 How to Use Beautiful Audio Editor?

04 Best Alternatives for Beautiful Audio Editor

Part 1. What Is Beautiful Audio Editor?

For an online editor, Beautiful Audio Editor is the best choice, and this is because the editor is feature-rich. This editor works well on both Chrome and Firefox browsers. Beautiful Audio Editor is great for the fact that it offers excellent options of frequency effects. Importantly, the audio editor allows you to save the files on Google Drive.

Do you know the best part of Beautiful Audio Editor? The editor supports multi-track editing and allows you to adjust and manage every track level. With this editor, try and move from complete silence to 6 decibels higher than the actual level. Do you know what wonders this can do? For smooth fade-ins and fade-outs, this is very helpful.

Part 2. Beautiful Audio Editor: Key Features, Pros & Cons

With Beautiful Audio Editor, you can edit amazing audio files, make stunning mixes and crazy podcasts. This online, easy-to-use editor has a lot of features to offer. Do you know what they are? Let’s increase your knowledge and share some key features of Beautiful Audio Editor:

· Editing Features

This is a multi-track audio editor that supports adjusting every level of each track. With Beautiful Audio Editor, try to alter volume and pan. Along with this, options like Move, Split, Duplicate and Delete sections of the audio file are also offered.

· Recording

Do you think Beautiful Audio Editor is just an editor? You are wrong if you think so. This is because the editor is not only great for editing but try and record with this fantastic tool. You can record through your microphone and get high-quality recordings.

· Effects

Beautiful Audio Editor provides a wide range of effects that can modify and transform your audio file. For instance, you get effects like Gain, Dynamic Compression, Reverb, Low/High pass filters. Along with all this, you can also speed up or slow down the audio.

· Customized Effects

Which audio editor offers customized effects? Beautiful Audio Editor does! With Volume Envelopes, you can create custom Fade Ins and Fade Outs. Moreover, the editor also provides features like dragging the effects, zooming, etc.

2.1. Pros & Cons of Beautiful Audio Editor

Do you have any idea about the benefits that you get from Beautiful Audio Editor? If you don’t, let’s enlighten you with this editor’s pros and cons.

Benefits

• You can export files both in 16-bit WAV and also in 128-bit MP3 format from Beautiful AudioEditor.
• This audio editor is free to use. You don’t even have to register for editing audio, just open Chrome or Firefox and start the work.
• Your edited audio files are saved both online and offline. You can either save files on Google Drive or else save local files.
• Beautiful Audio Editorenables you to create audio envelopes. Moreover, you can apply dozens of audio effects while editing.

Drawback

• A significant drawback of this editor is that it crashes if the project is over 300MB or 45mins. This is not reliable for high stake projects.

Part 3. How to Use Beautiful Audio Editor?

Have you ever used this editor before? As we mentioned in the introduction, we would introduce the steps to use Beautiful Audio Editor, so here we are. Are you ready to learn about its step-by-step guidelines? Let’s get started!

Step 1: To start the editing, open the online editor. A timeline screen will appear in front of you; head to the ‘File’ tab and click on it from the top menu bar. From the sub-menu, select the ‘Import local sound file’ option to import the file from your device.

Step 2: For splitting the audio, drag the play head to the point from where you want to split. Next to the toolbar, click on the ‘Split’ icon. This will split the audio into 2 parts, and you can split as much as you want to. By using the ‘Remove’ icon from the toolbar, you can also remove the extra audio part.

Step 3: For adding Fade to your audio, move to the line under the timeline. Now, select a start and an endpoint on the line and drag it downwards for Fade Out. In comparison, push it upwards for Fade In.

Step 4: For adjusting the Volume or the Gain, move to the bottom left corner. You will see a ‘Gain’ option, hit on it to open its tab on the right side of the screen, and then adjust the ‘Gain’ by moving the slider.

Step 5: You can also rename your file by double-clicking on it. Lastly, to save the file, tap on the ‘File’ tab and select the ‘Save project to a local file for later load’ option. After this, download the file to your preferred location.

Part 4. Best Alternatives for Beautiful Audio Editor

We have something for you if Beautiful Audio Editor has failed to impress you. The following section of this article will share the best alternatives with its readers. Let’s begin!

1. TwistedWave

Do you know how amazing this alternative is? TwistedWave is an online, easy-to-use audio editor. The interface of this editor is very clean and simple to understand. Moreover, you get a long list of effects from TwistedWave, for instance, Reverse, Graphic EQ, Fade in and Fade out, Amplify, Normalize, and others.

The best part about this audio editor is that you can easily send files to SoundCloud and also Google Drive. Likewise, you can upload files from both Google Drive and SoundCloud.

2. Bear Audio Editor

Moving on to discuss Bear Audio Editor, which can trim, cut, and also convert music files. Interestingly, you can avail all these amazing features online and free, without even downloading any software. This editor offers you options like Fade In and Out, Mute, Pitch and Volume Adjustment, etc.

You can also combine different music files, ringtones, etc., to make your perfect mix. Bear Audio Editor supports MP3, OGG, and WAV input formats. Whereas OGG, WMA, WAV, MP3, and M4R are output-supported formats.

3. Sodaphonic

Do you want to edit a file from Dropbox? Try Sodaphonic audio editor. You can not only open files from Dropbox but also import them from Google Drive. This online editor offers diverse options that include Louder, Quieter, Silence, Normalize, Bleep it, Reverse, and much more than this.

Other than this, you get different editing options, including Delete, Trim, Cut, Copy, etc. This editor also allows access to a microphone for recording.

Last Words

Beautiful Audio Editor, like its name, is beautiful and equally amazing to use. The online editor offers a lot of features, and interestingly, it’s free. The article discussed great details about Beautiful Audio Editor along with its guideline. What if we share another audio editor? Try Wondershare Filmora Audio Editor, the easy-to-use, drag-and-drop software.

You can modify your audio files to the next level with Filmora . Its advanced audio editing features are unmatched, like Audio Equalizer, Audio Denoise, Detach Audio from Video, and so much more. You can also add Voiceovers, replace original audio from video, add background music, etc.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More >

02 Beautiful Audio Editor: Key Features, Pros & Cons

03 How to Use Beautiful Audio Editor?

04 Best Alternatives for Beautiful Audio Editor

Part 1. What Is Beautiful Audio Editor?

For an online editor, Beautiful Audio Editor is the best choice, and this is because the editor is feature-rich. This editor works well on both Chrome and Firefox browsers. Beautiful Audio Editor is great for the fact that it offers excellent options of frequency effects. Importantly, the audio editor allows you to save the files on Google Drive.

Do you know the best part of Beautiful Audio Editor? The editor supports multi-track editing and allows you to adjust and manage every track level. With this editor, try and move from complete silence to 6 decibels higher than the actual level. Do you know what wonders this can do? For smooth fade-ins and fade-outs, this is very helpful.

Part 2. Beautiful Audio Editor: Key Features, Pros & Cons

With Beautiful Audio Editor, you can edit amazing audio files, make stunning mixes and crazy podcasts. This online, easy-to-use editor has a lot of features to offer. Do you know what they are? Let’s increase your knowledge and share some key features of Beautiful Audio Editor:

· Editing Features

This is a multi-track audio editor that supports adjusting every level of each track. With Beautiful Audio Editor, try to alter volume and pan. Along with this, options like Move, Split, Duplicate and Delete sections of the audio file are also offered.

· Recording

Do you think Beautiful Audio Editor is just an editor? You are wrong if you think so. This is because the editor is not only great for editing but try and record with this fantastic tool. You can record through your microphone and get high-quality recordings.

· Effects

Beautiful Audio Editor provides a wide range of effects that can modify and transform your audio file. For instance, you get effects like Gain, Dynamic Compression, Reverb, Low/High pass filters. Along with all this, you can also speed up or slow down the audio.

· Customized Effects

Which audio editor offers customized effects? Beautiful Audio Editor does! With Volume Envelopes, you can create custom Fade Ins and Fade Outs. Moreover, the editor also provides features like dragging the effects, zooming, etc.

2.1. Pros & Cons of Beautiful Audio Editor

Do you have any idea about the benefits that you get from Beautiful Audio Editor? If you don’t, let’s enlighten you with this editor’s pros and cons.

Benefits

• You can export files both in 16-bit WAV and also in 128-bit MP3 format from Beautiful AudioEditor.
• This audio editor is free to use. You don’t even have to register for editing audio, just open Chrome or Firefox and start the work.
• Your edited audio files are saved both online and offline. You can either save files on Google Drive or else save local files.
• Beautiful Audio Editorenables you to create audio envelopes. Moreover, you can apply dozens of audio effects while editing.

Drawback

• A significant drawback of this editor is that it crashes if the project is over 300MB or 45mins. This is not reliable for high stake projects.

Part 3. How to Use Beautiful Audio Editor?

Have you ever used this editor before? As we mentioned in the introduction, we would introduce the steps to use Beautiful Audio Editor, so here we are. Are you ready to learn about its step-by-step guidelines? Let’s get started!

Step 1: To start the editing, open the online editor. A timeline screen will appear in front of you; head to the ‘File’ tab and click on it from the top menu bar. From the sub-menu, select the ‘Import local sound file’ option to import the file from your device.

Step 2: For splitting the audio, drag the play head to the point from where you want to split. Next to the toolbar, click on the ‘Split’ icon. This will split the audio into 2 parts, and you can split as much as you want to. By using the ‘Remove’ icon from the toolbar, you can also remove the extra audio part.

Step 3: For adding Fade to your audio, move to the line under the timeline. Now, select a start and an endpoint on the line and drag it downwards for Fade Out. In comparison, push it upwards for Fade In.

Step 4: For adjusting the Volume or the Gain, move to the bottom left corner. You will see a ‘Gain’ option, hit on it to open its tab on the right side of the screen, and then adjust the ‘Gain’ by moving the slider.

Step 5: You can also rename your file by double-clicking on it. Lastly, to save the file, tap on the ‘File’ tab and select the ‘Save project to a local file for later load’ option. After this, download the file to your preferred location.

Part 4. Best Alternatives for Beautiful Audio Editor

We have something for you if Beautiful Audio Editor has failed to impress you. The following section of this article will share the best alternatives with its readers. Let’s begin!

1. TwistedWave

Do you know how amazing this alternative is? TwistedWave is an online, easy-to-use audio editor. The interface of this editor is very clean and simple to understand. Moreover, you get a long list of effects from TwistedWave, for instance, Reverse, Graphic EQ, Fade in and Fade out, Amplify, Normalize, and others.

The best part about this audio editor is that you can easily send files to SoundCloud and also Google Drive. Likewise, you can upload files from both Google Drive and SoundCloud.

2. Bear Audio Editor

Moving on to discuss Bear Audio Editor, which can trim, cut, and also convert music files. Interestingly, you can avail all these amazing features online and free, without even downloading any software. This editor offers you options like Fade In and Out, Mute, Pitch and Volume Adjustment, etc.

You can also combine different music files, ringtones, etc., to make your perfect mix. Bear Audio Editor supports MP3, OGG, and WAV input formats. Whereas OGG, WMA, WAV, MP3, and M4R are output-supported formats.

3. Sodaphonic

Do you want to edit a file from Dropbox? Try Sodaphonic audio editor. You can not only open files from Dropbox but also import them from Google Drive. This online editor offers diverse options that include Louder, Quieter, Silence, Normalize, Bleep it, Reverse, and much more than this.

Other than this, you get different editing options, including Delete, Trim, Cut, Copy, etc. This editor also allows access to a microphone for recording.

Last Words

Beautiful Audio Editor, like its name, is beautiful and equally amazing to use. The online editor offers a lot of features, and interestingly, it’s free. The article discussed great details about Beautiful Audio Editor along with its guideline. What if we share another audio editor? Try Wondershare Filmora Audio Editor, the easy-to-use, drag-and-drop software.

You can modify your audio files to the next level with Filmora . Its advanced audio editing features are unmatched, like Audio Equalizer, Audio Denoise, Detach Audio from Video, and so much more. You can also add Voiceovers, replace original audio from video, add background music, etc.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More >

“The Art of Soundscape Separation: Isolating Audio From Visual Media”

It is tough to find a suitable sound for your content. Looking for the perfect music for your video can take hours. It is possible that even after spending hours, you still can’t find the ideal music. It usually happens that you like a sound, but it’s part of a video.

The video is the only hurdle between you and the sound. The best way to get over this hurdle is to extract sound from video. You might not have heard about this before, but some amazing sound extractors in the market are widely used for this very purpose. Let us share some information with you regarding how you can extract sound from videos.

In this article

01 Top 1 Recommended Sound Extractor: Wondershare Filmora

02 4 Popular Sound Extractor to Help You Extract Sound from Video

Part 1. Top 1 Recommended Sound Extractor: Wondershare Filmora

The number 1 sound extractor available is Wondershare Filmora . Filmora is not just a video editing software. It offers more than someone can imagine. The editor is inexpensive to use. Filmora has a very pleasing interface that even beginners can understand and work with it. Moreover, it supports a wide range of both input and output formats.

With Filmora, you can do classical video editing. It has many features to offer. For instance, Filmora allows Auto Reframe and Auto Highlight. Along with that, users can do Color Match. Are you interested in knowing something extra about this video editor? Well, the cherry on top, Filmora also has an asset library. You can add fancy elements, transitions, effects, different titles, and a lot more things with Filmora and Filmstock.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Do you want to know what else it can do? Well, Wondershare Filmora is not an ordinary video editor. With this powerful software, you can also edit Audio. Using Filmora, you can adjust Audio, Split Audio, even add Voiceovers. Moreover, extracting sound from video is also something Filmora can do. You can use its ‘Detach Audio’ feature for this purpose. For your help, its step-by-step guideline is shared below:

Step 1: Lets Import Video File

To extract sound from the video, you firstly need to open Wondershare Filmora. After that, you are supposed to import the media file from which you plan to extract the sound. For that, go to the ‘Files’ tab from the top panel. There select ‘Import Media’ and locate the file from your device.

Step 2: Extract Audio from Video

After the file has been imported, drag and drops it onto the timeline. What should be done next? It’s time to extract the audio. You need to right-click on the media file. A menu will pop up on the screen. Hover the cursor on the ‘Audio’ option. A sub-menu will appear; select the ‘Detach Audio’ option.

Step 3: Edit the Audio

The audio and video will appear separately on the timeline, in two different tracks. Do you think the video is of any use? Certainly not. Right-click on the video and select the option of ‘Delete.’ After this, you can freely edit the audio file if you want to. Double click on it to open the ‘Audio’ editing panel.

Step 4: Export and Save the File

Lastly, export the file when you are satisfied with all the edits. For that, hit the ‘Export’ button. In the ‘Local’ tab, you need to select ‘MP3’ as the output format. This is because we are exporting a sound file. In the end, save the file to your desired location and tap on ‘Export’ from the bottom right corner.

Part 2. 4 Popular Sound Extractor to Help You Extract Sound from Video

Are there some other tools to extract sound from video? Well, yes. We have mentioned earlier that the market is full of amazing sound extractors. The following section of this article will walk you through 4 popular sound extractors. We will share online as well as offline tools for both Windows and Mac. Should we start?

1. VLC

The first software to be discussed is VLC Media Player. The software is very popular because of the wide range of features and functionalities you get from it. VLC is a free and open-source media player. The software has no spyware, no user tracking, and no ads. It is compatible with all platforms. You can run it on Windows, Mac, Linux, Unix, Mac OS X, iOS, Android, and others.

Moreover, the media player can play everything. For instance, files, DVDs, Audio CDs, multiple streaming protocols, and other things. Interestingly, on most platforms, VLC has hardware decoding. It supports almost every input and output format. With VLC, you can easily extract sound from video. The software is simple but very fast and powerful.

2. Audacity

The next sound extractor for Windows and Mac that we are about to discuss is Audacity. This is again an open-source, free audio software. It has easy to use interface with a multi-track recorder as well as an editor. Are you a Linux user? Don’t worry; the audio software works like magic on Linux, macOS, Windows, and other operating systems. With Audacity, importing, editing, and combining sound files is very easy.

The software helps you to record live audio or playback from your computers. Do you know how many file formats Audacity supports? Well, the audio format ranges from MP3, AIFF, WAV, FLAC, AU, and others. Along with extracting sound from video, there is another amazing thing that you all should know. With Audacity, recorded files can also be converted into Digital Recordings or CDs.

3. Audio Extractor

The last online sound extractor that we are about to share is Audio Extractor. The tool is very easy to use and understand. Audio Extractor has a self-explanatory interface. The tools’ interface guides the users about the next step.

With three easy steps, you can extract sound from video. Start by accessing the online extractor. Then you need to upload the video from your respective device. This could be done by hitting the ‘Open video’ button. Audio Extractor supports various audio formats. For instance, MP3, MP2, WAV, FLAC, etc. You should select your desired audio format. Lastly, click on the ‘Extract audio’ button, and it’s done.

Last Words

Extracting sound from video and using it elsewhere is a smart thing to do. You can also be among those smart people if you learn from this article. We have talked about multiple unique sound extractors. The article also sheds light on the number 1 sound extractor, Wondershare Filmora.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More >

02 4 Popular Sound Extractor to Help You Extract Sound from Video

Part 1. Top 1 Recommended Sound Extractor: Wondershare Filmora

The number 1 sound extractor available is Wondershare Filmora . Filmora is not just a video editing software. It offers more than someone can imagine. The editor is inexpensive to use. Filmora has a very pleasing interface that even beginners can understand and work with it. Moreover, it supports a wide range of both input and output formats.

With Filmora, you can do classical video editing. It has many features to offer. For instance, Filmora allows Auto Reframe and Auto Highlight. Along with that, users can do Color Match. Are you interested in knowing something extra about this video editor? Well, the cherry on top, Filmora also has an asset library. You can add fancy elements, transitions, effects, different titles, and a lot more things with Filmora and Filmstock.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Do you want to know what else it can do? Well, Wondershare Filmora is not an ordinary video editor. With this powerful software, you can also edit Audio. Using Filmora, you can adjust Audio, Split Audio, even add Voiceovers. Moreover, extracting sound from video is also something Filmora can do. You can use its ‘Detach Audio’ feature for this purpose. For your help, its step-by-step guideline is shared below:

Step 1: Lets Import Video File

To extract sound from the video, you firstly need to open Wondershare Filmora. After that, you are supposed to import the media file from which you plan to extract the sound. For that, go to the ‘Files’ tab from the top panel. There select ‘Import Media’ and locate the file from your device.

Step 2: Extract Audio from Video

After the file has been imported, drag and drops it onto the timeline. What should be done next? It’s time to extract the audio. You need to right-click on the media file. A menu will pop up on the screen. Hover the cursor on the ‘Audio’ option. A sub-menu will appear; select the ‘Detach Audio’ option.

Step 3: Edit the Audio

The audio and video will appear separately on the timeline, in two different tracks. Do you think the video is of any use? Certainly not. Right-click on the video and select the option of ‘Delete.’ After this, you can freely edit the audio file if you want to. Double click on it to open the ‘Audio’ editing panel.

Step 4: Export and Save the File

Lastly, export the file when you are satisfied with all the edits. For that, hit the ‘Export’ button. In the ‘Local’ tab, you need to select ‘MP3’ as the output format. This is because we are exporting a sound file. In the end, save the file to your desired location and tap on ‘Export’ from the bottom right corner.

Part 2. 4 Popular Sound Extractor to Help You Extract Sound from Video

Are there some other tools to extract sound from video? Well, yes. We have mentioned earlier that the market is full of amazing sound extractors. The following section of this article will walk you through 4 popular sound extractors. We will share online as well as offline tools for both Windows and Mac. Should we start?

1. VLC

The first software to be discussed is VLC Media Player. The software is very popular because of the wide range of features and functionalities you get from it. VLC is a free and open-source media player. The software has no spyware, no user tracking, and no ads. It is compatible with all platforms. You can run it on Windows, Mac, Linux, Unix, Mac OS X, iOS, Android, and others.

Moreover, the media player can play everything. For instance, files, DVDs, Audio CDs, multiple streaming protocols, and other things. Interestingly, on most platforms, VLC has hardware decoding. It supports almost every input and output format. With VLC, you can easily extract sound from video. The software is simple but very fast and powerful.

2. Audacity

The next sound extractor for Windows and Mac that we are about to discuss is Audacity. This is again an open-source, free audio software. It has easy to use interface with a multi-track recorder as well as an editor. Are you a Linux user? Don’t worry; the audio software works like magic on Linux, macOS, Windows, and other operating systems. With Audacity, importing, editing, and combining sound files is very easy.

The software helps you to record live audio or playback from your computers. Do you know how many file formats Audacity supports? Well, the audio format ranges from MP3, AIFF, WAV, FLAC, AU, and others. Along with extracting sound from video, there is another amazing thing that you all should know. With Audacity, recorded files can also be converted into Digital Recordings or CDs.

3. Audio Extractor

The last online sound extractor that we are about to share is Audio Extractor. The tool is very easy to use and understand. Audio Extractor has a self-explanatory interface. The tools’ interface guides the users about the next step.

With three easy steps, you can extract sound from video. Start by accessing the online extractor. Then you need to upload the video from your respective device. This could be done by hitting the ‘Open video’ button. Audio Extractor supports various audio formats. For instance, MP3, MP2, WAV, FLAC, etc. You should select your desired audio format. Lastly, click on the ‘Extract audio’ button, and it’s done.

Last Words

Extracting sound from video and using it elsewhere is a smart thing to do. You can also be among those smart people if you learn from this article. We have talked about multiple unique sound extractors. The article also sheds light on the number 1 sound extractor, Wondershare Filmora.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More >

02 4 Popular Sound Extractor to Help You Extract Sound from Video

Part 1. Top 1 Recommended Sound Extractor: Wondershare Filmora

The number 1 sound extractor available is Wondershare Filmora . Filmora is not just a video editing software. It offers more than someone can imagine. The editor is inexpensive to use. Filmora has a very pleasing interface that even beginners can understand and work with it. Moreover, it supports a wide range of both input and output formats.

With Filmora, you can do classical video editing. It has many features to offer. For instance, Filmora allows Auto Reframe and Auto Highlight. Along with that, users can do Color Match. Are you interested in knowing something extra about this video editor? Well, the cherry on top, Filmora also has an asset library. You can add fancy elements, transitions, effects, different titles, and a lot more things with Filmora and Filmstock.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Do you want to know what else it can do? Well, Wondershare Filmora is not an ordinary video editor. With this powerful software, you can also edit Audio. Using Filmora, you can adjust Audio, Split Audio, even add Voiceovers. Moreover, extracting sound from video is also something Filmora can do. You can use its ‘Detach Audio’ feature for this purpose. For your help, its step-by-step guideline is shared below:

Step 1: Lets Import Video File

To extract sound from the video, you firstly need to open Wondershare Filmora. After that, you are supposed to import the media file from which you plan to extract the sound. For that, go to the ‘Files’ tab from the top panel. There select ‘Import Media’ and locate the file from your device.

Step 2: Extract Audio from Video

After the file has been imported, drag and drops it onto the timeline. What should be done next? It’s time to extract the audio. You need to right-click on the media file. A menu will pop up on the screen. Hover the cursor on the ‘Audio’ option. A sub-menu will appear; select the ‘Detach Audio’ option.

Step 3: Edit the Audio

The audio and video will appear separately on the timeline, in two different tracks. Do you think the video is of any use? Certainly not. Right-click on the video and select the option of ‘Delete.’ After this, you can freely edit the audio file if you want to. Double click on it to open the ‘Audio’ editing panel.

Step 4: Export and Save the File

Lastly, export the file when you are satisfied with all the edits. For that, hit the ‘Export’ button. In the ‘Local’ tab, you need to select ‘MP3’ as the output format. This is because we are exporting a sound file. In the end, save the file to your desired location and tap on ‘Export’ from the bottom right corner.

Part 2. 4 Popular Sound Extractor to Help You Extract Sound from Video

Are there some other tools to extract sound from video? Well, yes. We have mentioned earlier that the market is full of amazing sound extractors. The following section of this article will walk you through 4 popular sound extractors. We will share online as well as offline tools for both Windows and Mac. Should we start?

1. VLC

The first software to be discussed is VLC Media Player. The software is very popular because of the wide range of features and functionalities you get from it. VLC is a free and open-source media player. The software has no spyware, no user tracking, and no ads. It is compatible with all platforms. You can run it on Windows, Mac, Linux, Unix, Mac OS X, iOS, Android, and others.

Moreover, the media player can play everything. For instance, files, DVDs, Audio CDs, multiple streaming protocols, and other things. Interestingly, on most platforms, VLC has hardware decoding. It supports almost every input and output format. With VLC, you can easily extract sound from video. The software is simple but very fast and powerful.

2. Audacity

The next sound extractor for Windows and Mac that we are about to discuss is Audacity. This is again an open-source, free audio software. It has easy to use interface with a multi-track recorder as well as an editor. Are you a Linux user? Don’t worry; the audio software works like magic on Linux, macOS, Windows, and other operating systems. With Audacity, importing, editing, and combining sound files is very easy.

The software helps you to record live audio or playback from your computers. Do you know how many file formats Audacity supports? Well, the audio format ranges from MP3, AIFF, WAV, FLAC, AU, and others. Along with extracting sound from video, there is another amazing thing that you all should know. With Audacity, recorded files can also be converted into Digital Recordings or CDs.

3. Audio Extractor

The last online sound extractor that we are about to share is Audio Extractor. The tool is very easy to use and understand. Audio Extractor has a self-explanatory interface. The tools’ interface guides the users about the next step.

With three easy steps, you can extract sound from video. Start by accessing the online extractor. Then you need to upload the video from your respective device. This could be done by hitting the ‘Open video’ button. Audio Extractor supports various audio formats. For instance, MP3, MP2, WAV, FLAC, etc. You should select your desired audio format. Lastly, click on the ‘Extract audio’ button, and it’s done.

Last Words

Extracting sound from video and using it elsewhere is a smart thing to do. You can also be among those smart people if you learn from this article. We have talked about multiple unique sound extractors. The article also sheds light on the number 1 sound extractor, Wondershare Filmora.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More >

02 4 Popular Sound Extractor to Help You Extract Sound from Video

Part 1. Top 1 Recommended Sound Extractor: Wondershare Filmora

The number 1 sound extractor available is Wondershare Filmora . Filmora is not just a video editing software. It offers more than someone can imagine. The editor is inexpensive to use. Filmora has a very pleasing interface that even beginners can understand and work with it. Moreover, it supports a wide range of both input and output formats.

With Filmora, you can do classical video editing. It has many features to offer. For instance, Filmora allows Auto Reframe and Auto Highlight. Along with that, users can do Color Match. Are you interested in knowing something extra about this video editor? Well, the cherry on top, Filmora also has an asset library. You can add fancy elements, transitions, effects, different titles, and a lot more things with Filmora and Filmstock.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Do you want to know what else it can do? Well, Wondershare Filmora is not an ordinary video editor. With this powerful software, you can also edit Audio. Using Filmora, you can adjust Audio, Split Audio, even add Voiceovers. Moreover, extracting sound from video is also something Filmora can do. You can use its ‘Detach Audio’ feature for this purpose. For your help, its step-by-step guideline is shared below:

Step 1: Lets Import Video File

To extract sound from the video, you firstly need to open Wondershare Filmora. After that, you are supposed to import the media file from which you plan to extract the sound. For that, go to the ‘Files’ tab from the top panel. There select ‘Import Media’ and locate the file from your device.

Step 2: Extract Audio from Video

After the file has been imported, drag and drops it onto the timeline. What should be done next? It’s time to extract the audio. You need to right-click on the media file. A menu will pop up on the screen. Hover the cursor on the ‘Audio’ option. A sub-menu will appear; select the ‘Detach Audio’ option.

Step 3: Edit the Audio

The audio and video will appear separately on the timeline, in two different tracks. Do you think the video is of any use? Certainly not. Right-click on the video and select the option of ‘Delete.’ After this, you can freely edit the audio file if you want to. Double click on it to open the ‘Audio’ editing panel.

Step 4: Export and Save the File

Lastly, export the file when you are satisfied with all the edits. For that, hit the ‘Export’ button. In the ‘Local’ tab, you need to select ‘MP3’ as the output format. This is because we are exporting a sound file. In the end, save the file to your desired location and tap on ‘Export’ from the bottom right corner.

Part 2. 4 Popular Sound Extractor to Help You Extract Sound from Video

Are there some other tools to extract sound from video? Well, yes. We have mentioned earlier that the market is full of amazing sound extractors. The following section of this article will walk you through 4 popular sound extractors. We will share online as well as offline tools for both Windows and Mac. Should we start?

1. VLC

The first software to be discussed is VLC Media Player. The software is very popular because of the wide range of features and functionalities you get from it. VLC is a free and open-source media player. The software has no spyware, no user tracking, and no ads. It is compatible with all platforms. You can run it on Windows, Mac, Linux, Unix, Mac OS X, iOS, Android, and others.

Moreover, the media player can play everything. For instance, files, DVDs, Audio CDs, multiple streaming protocols, and other things. Interestingly, on most platforms, VLC has hardware decoding. It supports almost every input and output format. With VLC, you can easily extract sound from video. The software is simple but very fast and powerful.

2. Audacity

The next sound extractor for Windows and Mac that we are about to discuss is Audacity. This is again an open-source, free audio software. It has easy to use interface with a multi-track recorder as well as an editor. Are you a Linux user? Don’t worry; the audio software works like magic on Linux, macOS, Windows, and other operating systems. With Audacity, importing, editing, and combining sound files is very easy.

The software helps you to record live audio or playback from your computers. Do you know how many file formats Audacity supports? Well, the audio format ranges from MP3, AIFF, WAV, FLAC, AU, and others. Along with extracting sound from video, there is another amazing thing that you all should know. With Audacity, recorded files can also be converted into Digital Recordings or CDs.

3. Audio Extractor

The last online sound extractor that we are about to share is Audio Extractor. The tool is very easy to use and understand. Audio Extractor has a self-explanatory interface. The tools’ interface guides the users about the next step.

With three easy steps, you can extract sound from video. Start by accessing the online extractor. Then you need to upload the video from your respective device. This could be done by hitting the ‘Open video’ button. Audio Extractor supports various audio formats. For instance, MP3, MP2, WAV, FLAC, etc. You should select your desired audio format. Lastly, click on the ‘Extract audio’ button, and it’s done.

Last Words

Extracting sound from video and using it elsewhere is a smart thing to do. You can also be among those smart people if you learn from this article. We have talked about multiple unique sound extractors. The article also sheds light on the number 1 sound extractor, Wondershare Filmora.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects Try It Free Try It Free Learn More >

Also read: