“Suspend Voice Recording Features & Embed Original Tunes Using Windows Movie Maker”

How to Mute Audio in Windows Movie Maker?

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

The Visual Symphony: Infusing Premiere Pro Projects with Animate Waveform Integration and Audio Representation

By using waveform of the sound waves in Premiere Pro, we can better edit audio. In the following article, we’ll learn how the audio waveform auto-sync feature in Premiere Pro helps automatically align and merge clips in the Project panel, in the timeline, and when setting up a multicamera project and how to insert audio waveform on your clips using Premiere Pro.

Part 1. How to show Audio Waveform on clips in Premiere Pro? (2 ways)

Users frequently complain that the audio waveform can suddenly disappear while editing audio in Premiere Pro, which is quite annoying to deal with. In the following tutorial, I’m going to show you how to make the audio waveforms visible.

1. Click the wrench icon on settings button

If you are not seeing them on audio clips on your timeline, then you drag on an audio clip to your timeline or your sequence and just click on the wrench and check to show audio waveform.

Once you check that you should see the audio waveforms on your clip you can click it again you should see a checkmark and it is highlighted in blue and if you don’t want to see them all you have to do is click it again.

That will toggle off the audio waveforms and that is how to show the audio waveforms on your audio clips in adobe premiere pro.

2. Automatic generate audio waveform

Make sure “Automatic audio waveform creation” is selected by going to “Edit > Preferences > Audio” first. When importing files, no waveforms are generated if option is unticked. Only clips you import moving forward will be impacted by this; clips already imported won’t be affected.

Second, for creating audio waveforms on clips that don’t have them, select the clips in the Program panel and go to “Clip > Generate Audio Waveform”.

Part 2. How to add audio waveform animation in Premiere Pro?

If you want to simply add a dynamic effect to your audio, just follow the tutorial below.

Step1Click After Effects Composition

First, make sure both the video and audio are selected. Right-click and select replace with After Effects composition.

Step2Create a new solid in After Effects

After creating a new project in After Effects, you need to choose a new solid of any color in your composition.

Step3Open audio waveform effect

Search audio waveform and drag and drop this effect on your solid. The waveform will now respond to the audio in your film if you use the audio layer option for your clip in the effect parameters for your solid change.

Step4Adjust the audio waveform effect

The position of the waveform on your video can be changed by utilizing the start and end point settings. Make sure the last values for each selections are the same to maintain an even level. Next, you can change the characteristics to give your waveform the desired appearance. Here, I applied some fundamental settings that are effective for singing. Using the two-color picker options and the display options, you may also change the waveform’s inner and outer colors.

Step5Check the animation and export the video

Back in Premiere, you can pick whether you want the traditional analog lines to appear or a more contemporary digital waveform. Your clip will now be replaced with an After Effects composition that is dynamically tied to the audio waveform.

Part 3. How to change the incorrect audio waveform in Premiere Pro?

These problems typically result from corrupted cache/peak files. If you have cleared the cache from the application. I will recommend cleaning them manually by going to the location specified in “Preferences > Media Cache”.

Clean the contents of the folder named Media Cache, Media Cache files, and Peak files (Before cleaning them, please ensure to open these folders once and verify if they have any of the media files in them to avoid any accidental deletion of required media or asset).

Please make sure that the option “Save.cfa and.pek cache files next to the original media files when possible” is unchecked. If it is ticked, you will have to remove them by hand from the folders where the media files are kept.

The Audio previews can also be cleaned (File > Project Settings > Scratch Disks > Audio Previews).

The following time you open the project, these files will be cleared. Rebuilding the necessary cache and peak files could take some time.

Part 4. How to add audio waveform animation to video with Premiere Pro alternative?

In reality, based on the above process, it is clear that you must use After Effects to add audio waveform animation effects in Premiere Pro. Although you can further modify the animation, this approach is very difficult for beginners to understand, and it has a high learning cost. In this situation, we strongly advise you to try Filmora Audio Visualizer . We provide more than 25 animation effects and fixed pre-made waveform elements, and you can also adjust the color and frequency in Advanced Settings. Come and give it a try!

Conclusion

This article will help you in resolving various audio waveform issues in Premiere Pro. Additionally, you can discover how to create waveforms in your audio clips. You should try Wondershare Filmora to add the waveform animation even if Premiere Pro is one of the greatest audio and video editing programs. Beginners will find it more convenient and simpler. If you simply want to quickly polish your music video or podcast video, the Filmora audio visualizer is a better option.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Conclusion

This article will help you in resolving various audio waveform issues in Premiere Pro. Additionally, you can discover how to create waveforms in your audio clips. You should try Wondershare Filmora to add the waveform animation even if Premiere Pro is one of the greatest audio and video editing programs. Beginners will find it more convenient and simpler. If you simply want to quickly polish your music video or podcast video, the Filmora audio visualizer is a better option.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Innovative Methods for Achieving Professional-Level Dubbing with Filmora Software

How to Dub a Video [Video Dubbing]

Shanoon Cox

Mar 27, 2024• Proven solutions

Does hearing your favorite game commentary in German or French seem dull sometimes? Tired of searching for subtitle video or audio that suits your favorite video clip behind? How about you add your voice over the original one?

Have you ever imagined a scenario of hearing your voice in your favorite video or a video clip? Does it sound amazing? Yeah, this is how the behind the screens of the “Video dubbing” industry looks. Video dubbing experts play a vital role in bringing a movie or video content to international languages to become available to diverse audiences all over the world.

You may also like Best 6 Dubbing Software.

Video dubbing is the ongoing media trend that allows one to add their voice to a video and aids in sharing them with friends or a group. The original audio track is removed and replaced by the fresh one by the process called “revoicing.” Video dubbing technique is a time-consuming and costlier process. Also, the quality needs to be high-end for proper presentation to the audience. But various technological upgrades at present make this process an easier one. Scroll down and take a view of this article to know how to dub a video at ease.

• Part 1: How to Dub a Video with Ease: a Step-by-Step Guide
• Part 2: Tips on Video Dubbing for Beginners

How to Dub a Video with Ease: a Step-by-Step Guide

Before dubbing for a video, you should create content and get prepared with the voice tone and style correlating to the video that you need to dub in the native or other languages. You can get access to various tutorials or ideas and prepare yourself before making a video dubbing from the Internet. However, if you are a beginner, we have some tips for you in upcoming sessions. Stay tuned for it!

At this point, I put forward the introduction of software called Filmora from Wondershare , an excellent tool to fulfill all your video-related processes. Users worldwide highly recommend Filmora to carry over all your video editing functions because it comes loaded with various features. It helps discover your editing skills, adds an image to your imagination, and empowers your creativity.

• 4K editing support is an essential part of Filmora that enables you to edit and export videos at a high resolution.
• Multiple layering of video clips is possible by Picture-in-picture (PIP) feature.
• Add special effects to your background and green screen with the aid of the Chroma key.
• Experiencing a camera shake in your favorite picnic moment? Filmora easily stabilizes your video and eliminates such effects from your video.
• Screen recording, audio separation, audio-equalizer, split-screen, 3D Lut, Tilt Split, and audio mixer are the additional features of Filmora from Wondershare.

---

---

Are you ready to add your voice to your favorite video clip? Here is a step-by-step guide on how to dub a video with Wondershare Filmora . The technique of recording the voiceover first and then adding it to the video is the best way in many cases because it would sound natural.

Step 1: Connect Mic to PC

As the first step, connect the microphone to the computer.

Step 2: Visit Record Voiceover

Install and launch the Filmora software and click on the “New project” in the welcome window. Switch to the Record tab, and hit on the “Record Voiceover” option.

You can click on the microphone icon, and start recording the voice. Once complete, click the icon again and the recorded file will appear on the screen.

Step 3: Edit Record Files

Now edit the recorded voiceover file by simply clicking on the track, and you will get directed to the new window with various audio editing options like pitch, volume, speed, and so on.

Step 4: Create Title

At this point, your voiceover meets your video-Synchronization of both video and the recorded audio. Import and drag-and-drop the destined video clip in the right position.

How about a title to your video clip? You can add your favorite title to the video by clicking on the “Title” tab and choosing an appropriate title suitable for the clip.

Step 5: Preview and Export to Watch

You can preview the video and “Export” them once satisfied. Filmora allows you to save the file in different formats and share them with YouTube or any other social media directly. One can burn in a DVD drive, or watch on TV too.

Yay, you successfully dubbed your favorite video on your own, and isn’t it easy? Filmora from Wondershare made it possible.

Tips for Video Dubbing for Beginners

Although video dubbing is a translation of the video content to other languages, it requires correct synchronization, unlike the original audio and a little screwing. Are you a newbie to the media world? Is video dubbing the most interesting sideline that you want to explore further? Then there are specific tips that could help you out.

• For a clear and quality dubbed video, the voice behind the audio should be apt. keep yourself relaxed so that you can speak consistently, and have clarity.
• As the original voice diminishes, the originality has to be kept alive, and hence your voice modulation skills should be adequate.
• You must place the microphone in the right position such that the recording can ignore the ambient noise.
• Your accent means the most and has to synchronize with the lip movements in the video.
• If you want to add subtitles, make sure it moves right along with the video.

Conclusion

Video dubbing is the emerging and outstanding technology that had taken the film industry and entertainment to a great extent. So, are you excited to make a video clip with your voice dubbed in it? So, without thinking much, let’s get it done with Filmora today! You can now make your voice video clip easily once you know how to dub a video, and this article is all about it.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Does hearing your favorite game commentary in German or French seem dull sometimes? Tired of searching for subtitle video or audio that suits your favorite video clip behind? How about you add your voice over the original one?

Have you ever imagined a scenario of hearing your voice in your favorite video or a video clip? Does it sound amazing? Yeah, this is how the behind the screens of the “Video dubbing” industry looks. Video dubbing experts play a vital role in bringing a movie or video content to international languages to become available to diverse audiences all over the world.

You may also like Best 6 Dubbing Software.

Video dubbing is the ongoing media trend that allows one to add their voice to a video and aids in sharing them with friends or a group. The original audio track is removed and replaced by the fresh one by the process called “revoicing.” Video dubbing technique is a time-consuming and costlier process. Also, the quality needs to be high-end for proper presentation to the audience. But various technological upgrades at present make this process an easier one. Scroll down and take a view of this article to know how to dub a video at ease.

• Part 1: How to Dub a Video with Ease: a Step-by-Step Guide
• Part 2: Tips on Video Dubbing for Beginners

How to Dub a Video with Ease: a Step-by-Step Guide

Before dubbing for a video, you should create content and get prepared with the voice tone and style correlating to the video that you need to dub in the native or other languages. You can get access to various tutorials or ideas and prepare yourself before making a video dubbing from the Internet. However, if you are a beginner, we have some tips for you in upcoming sessions. Stay tuned for it!

At this point, I put forward the introduction of software called Filmora from Wondershare , an excellent tool to fulfill all your video-related processes. Users worldwide highly recommend Filmora to carry over all your video editing functions because it comes loaded with various features. It helps discover your editing skills, adds an image to your imagination, and empowers your creativity.

• 4K editing support is an essential part of Filmora that enables you to edit and export videos at a high resolution.
• Multiple layering of video clips is possible by Picture-in-picture (PIP) feature.
• Add special effects to your background and green screen with the aid of the Chroma key.
• Experiencing a camera shake in your favorite picnic moment? Filmora easily stabilizes your video and eliminates such effects from your video.
• Screen recording, audio separation, audio-equalizer, split-screen, 3D Lut, Tilt Split, and audio mixer are the additional features of Filmora from Wondershare.

---

---

Are you ready to add your voice to your favorite video clip? Here is a step-by-step guide on how to dub a video with Wondershare Filmora . The technique of recording the voiceover first and then adding it to the video is the best way in many cases because it would sound natural.

Step 1: Connect Mic to PC

As the first step, connect the microphone to the computer.

Step 2: Visit Record Voiceover

Install and launch the Filmora software and click on the “New project” in the welcome window. Switch to the Record tab, and hit on the “Record Voiceover” option.

You can click on the microphone icon, and start recording the voice. Once complete, click the icon again and the recorded file will appear on the screen.

Step 3: Edit Record Files

Now edit the recorded voiceover file by simply clicking on the track, and you will get directed to the new window with various audio editing options like pitch, volume, speed, and so on.

Step 4: Create Title

At this point, your voiceover meets your video-Synchronization of both video and the recorded audio. Import and drag-and-drop the destined video clip in the right position.

How about a title to your video clip? You can add your favorite title to the video by clicking on the “Title” tab and choosing an appropriate title suitable for the clip.

Step 5: Preview and Export to Watch

You can preview the video and “Export” them once satisfied. Filmora allows you to save the file in different formats and share them with YouTube or any other social media directly. One can burn in a DVD drive, or watch on TV too.

Yay, you successfully dubbed your favorite video on your own, and isn’t it easy? Filmora from Wondershare made it possible.

Tips for Video Dubbing for Beginners

Although video dubbing is a translation of the video content to other languages, it requires correct synchronization, unlike the original audio and a little screwing. Are you a newbie to the media world? Is video dubbing the most interesting sideline that you want to explore further? Then there are specific tips that could help you out.

• For a clear and quality dubbed video, the voice behind the audio should be apt. keep yourself relaxed so that you can speak consistently, and have clarity.
• As the original voice diminishes, the originality has to be kept alive, and hence your voice modulation skills should be adequate.
• You must place the microphone in the right position such that the recording can ignore the ambient noise.
• Your accent means the most and has to synchronize with the lip movements in the video.
• If you want to add subtitles, make sure it moves right along with the video.

Conclusion

Video dubbing is the emerging and outstanding technology that had taken the film industry and entertainment to a great extent. So, are you excited to make a video clip with your voice dubbed in it? So, without thinking much, let’s get it done with Filmora today! You can now make your voice video clip easily once you know how to dub a video, and this article is all about it.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Does hearing your favorite game commentary in German or French seem dull sometimes? Tired of searching for subtitle video or audio that suits your favorite video clip behind? How about you add your voice over the original one?

Have you ever imagined a scenario of hearing your voice in your favorite video or a video clip? Does it sound amazing? Yeah, this is how the behind the screens of the “Video dubbing” industry looks. Video dubbing experts play a vital role in bringing a movie or video content to international languages to become available to diverse audiences all over the world.

You may also like Best 6 Dubbing Software.

Video dubbing is the ongoing media trend that allows one to add their voice to a video and aids in sharing them with friends or a group. The original audio track is removed and replaced by the fresh one by the process called “revoicing.” Video dubbing technique is a time-consuming and costlier process. Also, the quality needs to be high-end for proper presentation to the audience. But various technological upgrades at present make this process an easier one. Scroll down and take a view of this article to know how to dub a video at ease.

• Part 1: How to Dub a Video with Ease: a Step-by-Step Guide
• Part 2: Tips on Video Dubbing for Beginners

How to Dub a Video with Ease: a Step-by-Step Guide

Before dubbing for a video, you should create content and get prepared with the voice tone and style correlating to the video that you need to dub in the native or other languages. You can get access to various tutorials or ideas and prepare yourself before making a video dubbing from the Internet. However, if you are a beginner, we have some tips for you in upcoming sessions. Stay tuned for it!

At this point, I put forward the introduction of software called Filmora from Wondershare , an excellent tool to fulfill all your video-related processes. Users worldwide highly recommend Filmora to carry over all your video editing functions because it comes loaded with various features. It helps discover your editing skills, adds an image to your imagination, and empowers your creativity.

• 4K editing support is an essential part of Filmora that enables you to edit and export videos at a high resolution.
• Multiple layering of video clips is possible by Picture-in-picture (PIP) feature.
• Add special effects to your background and green screen with the aid of the Chroma key.
• Experiencing a camera shake in your favorite picnic moment? Filmora easily stabilizes your video and eliminates such effects from your video.
• Screen recording, audio separation, audio-equalizer, split-screen, 3D Lut, Tilt Split, and audio mixer are the additional features of Filmora from Wondershare.

---

---

Are you ready to add your voice to your favorite video clip? Here is a step-by-step guide on how to dub a video with Wondershare Filmora . The technique of recording the voiceover first and then adding it to the video is the best way in many cases because it would sound natural.

Step 1: Connect Mic to PC

As the first step, connect the microphone to the computer.

Step 2: Visit Record Voiceover

Install and launch the Filmora software and click on the “New project” in the welcome window. Switch to the Record tab, and hit on the “Record Voiceover” option.

You can click on the microphone icon, and start recording the voice. Once complete, click the icon again and the recorded file will appear on the screen.

Step 3: Edit Record Files

Now edit the recorded voiceover file by simply clicking on the track, and you will get directed to the new window with various audio editing options like pitch, volume, speed, and so on.

Step 4: Create Title

At this point, your voiceover meets your video-Synchronization of both video and the recorded audio. Import and drag-and-drop the destined video clip in the right position.

How about a title to your video clip? You can add your favorite title to the video by clicking on the “Title” tab and choosing an appropriate title suitable for the clip.

Step 5: Preview and Export to Watch

You can preview the video and “Export” them once satisfied. Filmora allows you to save the file in different formats and share them with YouTube or any other social media directly. One can burn in a DVD drive, or watch on TV too.

Yay, you successfully dubbed your favorite video on your own, and isn’t it easy? Filmora from Wondershare made it possible.

Tips for Video Dubbing for Beginners

Although video dubbing is a translation of the video content to other languages, it requires correct synchronization, unlike the original audio and a little screwing. Are you a newbie to the media world? Is video dubbing the most interesting sideline that you want to explore further? Then there are specific tips that could help you out.

• For a clear and quality dubbed video, the voice behind the audio should be apt. keep yourself relaxed so that you can speak consistently, and have clarity.
• As the original voice diminishes, the originality has to be kept alive, and hence your voice modulation skills should be adequate.
• You must place the microphone in the right position such that the recording can ignore the ambient noise.
• Your accent means the most and has to synchronize with the lip movements in the video.
• If you want to add subtitles, make sure it moves right along with the video.

Conclusion

Video dubbing is the emerging and outstanding technology that had taken the film industry and entertainment to a great extent. So, are you excited to make a video clip with your voice dubbed in it? So, without thinking much, let’s get it done with Filmora today! You can now make your voice video clip easily once you know how to dub a video, and this article is all about it.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Does hearing your favorite game commentary in German or French seem dull sometimes? Tired of searching for subtitle video or audio that suits your favorite video clip behind? How about you add your voice over the original one?

Have you ever imagined a scenario of hearing your voice in your favorite video or a video clip? Does it sound amazing? Yeah, this is how the behind the screens of the “Video dubbing” industry looks. Video dubbing experts play a vital role in bringing a movie or video content to international languages to become available to diverse audiences all over the world.

You may also like Best 6 Dubbing Software.

Video dubbing is the ongoing media trend that allows one to add their voice to a video and aids in sharing them with friends or a group. The original audio track is removed and replaced by the fresh one by the process called “revoicing.” Video dubbing technique is a time-consuming and costlier process. Also, the quality needs to be high-end for proper presentation to the audience. But various technological upgrades at present make this process an easier one. Scroll down and take a view of this article to know how to dub a video at ease.

• Part 1: How to Dub a Video with Ease: a Step-by-Step Guide
• Part 2: Tips on Video Dubbing for Beginners

How to Dub a Video with Ease: a Step-by-Step Guide

Before dubbing for a video, you should create content and get prepared with the voice tone and style correlating to the video that you need to dub in the native or other languages. You can get access to various tutorials or ideas and prepare yourself before making a video dubbing from the Internet. However, if you are a beginner, we have some tips for you in upcoming sessions. Stay tuned for it!

At this point, I put forward the introduction of software called Filmora from Wondershare , an excellent tool to fulfill all your video-related processes. Users worldwide highly recommend Filmora to carry over all your video editing functions because it comes loaded with various features. It helps discover your editing skills, adds an image to your imagination, and empowers your creativity.

• 4K editing support is an essential part of Filmora that enables you to edit and export videos at a high resolution.
• Multiple layering of video clips is possible by Picture-in-picture (PIP) feature.
• Add special effects to your background and green screen with the aid of the Chroma key.
• Experiencing a camera shake in your favorite picnic moment? Filmora easily stabilizes your video and eliminates such effects from your video.
• Screen recording, audio separation, audio-equalizer, split-screen, 3D Lut, Tilt Split, and audio mixer are the additional features of Filmora from Wondershare.

---

---

Are you ready to add your voice to your favorite video clip? Here is a step-by-step guide on how to dub a video with Wondershare Filmora . The technique of recording the voiceover first and then adding it to the video is the best way in many cases because it would sound natural.

Step 1: Connect Mic to PC

As the first step, connect the microphone to the computer.

Step 2: Visit Record Voiceover

Install and launch the Filmora software and click on the “New project” in the welcome window. Switch to the Record tab, and hit on the “Record Voiceover” option.

You can click on the microphone icon, and start recording the voice. Once complete, click the icon again and the recorded file will appear on the screen.

Step 3: Edit Record Files

Now edit the recorded voiceover file by simply clicking on the track, and you will get directed to the new window with various audio editing options like pitch, volume, speed, and so on.

Step 4: Create Title

At this point, your voiceover meets your video-Synchronization of both video and the recorded audio. Import and drag-and-drop the destined video clip in the right position.

How about a title to your video clip? You can add your favorite title to the video by clicking on the “Title” tab and choosing an appropriate title suitable for the clip.

Step 5: Preview and Export to Watch

You can preview the video and “Export” them once satisfied. Filmora allows you to save the file in different formats and share them with YouTube or any other social media directly. One can burn in a DVD drive, or watch on TV too.

Yay, you successfully dubbed your favorite video on your own, and isn’t it easy? Filmora from Wondershare made it possible.

Tips for Video Dubbing for Beginners

Although video dubbing is a translation of the video content to other languages, it requires correct synchronization, unlike the original audio and a little screwing. Are you a newbie to the media world? Is video dubbing the most interesting sideline that you want to explore further? Then there are specific tips that could help you out.

• For a clear and quality dubbed video, the voice behind the audio should be apt. keep yourself relaxed so that you can speak consistently, and have clarity.
• As the original voice diminishes, the originality has to be kept alive, and hence your voice modulation skills should be adequate.
• You must place the microphone in the right position such that the recording can ignore the ambient noise.
• Your accent means the most and has to synchronize with the lip movements in the video.
• If you want to add subtitles, make sure it moves right along with the video.

Conclusion

Video dubbing is the emerging and outstanding technology that had taken the film industry and entertainment to a great extent. So, are you excited to make a video clip with your voice dubbed in it? So, without thinking much, let’s get it done with Filmora today! You can now make your voice video clip easily once you know how to dub a video, and this article is all about it.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: