New The Ultimate Technique for Harmonizing Volume in DaVinci Resolve
The Ultimate Technique for Harmonizing Volume in DaVinci Resolve
How To Normalize Audio In DaVinci Resolve
It happens a lot of times that we are not satisfied with several details our videos and audios contain, and we need to edit them. One of the most common problems we face is that our volumes are not normalized, and we need to take some extra time in order to achieve the best result for our audiences. Even with little or no knowledge about this very specific topic, we need to inform ourselves and find the solutions, make our videos more watch-able and our audios more listen-able, so to say.
There are several ways the audio normalization is achieved. One type is called peak normalization, helping adjust the recording based on the highest signal level present in the recording; the second is loudness normalization, adjusting the recording based on perceived loudness. RMS (Root-Mean-Square) changes the value of all the samples, where their average electrical volume overall is a specified level.
Mostly, there are two reasons why we should give audio normalization a try. You need to decide yourself, what is your reason and expected outcome when you use audio normalization. First is when your aim is to get the maximum volume, but the second boils down to matching different volumes with each other.
When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.
More concretely, in general, audio normalization is when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, “the norm” for the project. It means that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.
You can have the desired result using different kinds of software. Nowadays, a lot of programs offer you the tool which facilitates this process. So, one of them would be DaVinci Resolve, which we are going to discuss in this article.
What is DaVinci Resolve? The description goes: “DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool!” so, let’s discover what this software can do to help us balance the audio!
So, how to balance your audio in DaVinci Resolve? We are going to discuss everything step by step – how to set your target loudness level, how to monitor the loudness, and how you can use the automation feature.
Well, of course, have the program installed and opened. Then, add your video with the audio you want to edit or the audio separately, if that’s what you are aiming to do.
The first step you need to make is to set your target loudness level – for this, find the little settings button on the right bottom of the program and click on it. Now, go down to the Fairlight menu and change the Target Loudness Level. If you are doing the audio normalization for the Youtube content, then it is recommended to set it to -14 LUFS.
Next, you are going to head to the Fairlight page and make sure that your meters are open. the loudness meter is on the right top of the layout of the program, and it goes from +9 to -15 LUFS.
Here, zero represents exactly what our target loudness level is, in this case, as you remember, we set it to -14 LUFS. So, ensure that our loudness is as close as zero as possible on the meter, but you can also make it lower, such as -3. Whenever you play, you will be able to see that there are some numbers popping up to the right of the meter.
The first one, you’ll find, is Short – constantly changing, indicating how far above or below the target loudness level you are at a given time. Short Max tells you how far above or below your target loudness level the loudest point of your video is. Range is a measure of your quietest pick to your loudest peak, and the last one is Integrated – it gives you the overall loudness of your video in relation to your target loudness level. Integrated is the number we aim to keep around -3 or 0.
We can use our main slider (next to the sequence on the right) to make our video louder or quieter until we hit that target loudness level.
Also, there is an automation tool that can help you dial in your loudness. In order to access this feature, find a red icon, looking like a wave with kind of a key frames.
Next, open up your Index (on the far top panel, a little bit from the left), and make sure you are in the tracks menu in your editing index.
What you want to do is to make your main track visible on the timeline, so hit on the eyeball next to your main and go to your timeline, where you will expand your main track until you see your Loudness History options.
Here, you will need to check in the box next to Integrated and turn on the Loudness History. This will show the integrated loudness level, adjust your main track’s volume accordingly, so you are below the zero line. And, that’s actually it!
How to normalize audio in Wondershare Filmora X?
Even though doing this with the help of DaVinci Resolve is really helpful, and, let’s say, sophisticated, you might find it a little complicated, in case you were not so familiar with video/audio editing. So, we would like you to have some information about what alternative you can turn to, and in this case, it’s worth bringing up a software - Wondershare Filmora X . With it, you will find that the same task can be carried out wonderfully. It is also a video editor, but it is one of the easiest to use in the word, supported by Mac and Windows. Filmora offers a great, neat, user-friendly interface, and helps you understand the very basics of editing. Actually, it has not been long since Wondershare Filmora X introduced the feature to normalize the audio. So, you might want download the latest version of Filmora X and start following along the steps we are going to provide for you to understand how audio normalization works on Filmora X .
Free Download For Win 7 or later(64-bit)
Free Download For macOS 10.14 or later
After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.
Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.
Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.
Now, after clicking on it, you can just wait and the normalization will be completed soon.
When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!
So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!
Free Download For macOS 10.14 or later
After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.
Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.
Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.
Now, after clicking on it, you can just wait and the normalization will be completed soon.
When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!
So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!
In-Depth Tips: Utilizing Voxacell’s Voice Change Functionality for a More Dynamic Discord Interaction
Discord is a fantastic software for communication like instant messaging, content delivery, video calls, voice calls, etc. It supports various operating systems, such as Windows, Mac, Linux, Android, iOS, iPad OS, and web browsers.
Do you know a way to have more fun with Discord? Using Voxal Voice Changer on Discord can double the fun and entertainment. To know more about Voxal voice changer and Discord, read the article below.
Part 1. What Is Voxal Voice Changer?
Part 2. How to Use Voxal Voice Changer on Discord
Part 3. How to Fix Voxal Voice Changer Not Working
Part 4. 3 Best Voxal Voice Changer Alternatives
For Win 7 or later (64-bit)
For macOS 10.12 or later
Part 1. What Is Voxal Voice Changer?
Who doesn’t like to have fun by changing their voice? Voxal Voice Changer always takes the lead when we talk about voice changers. With this voice changer, you can add different sound effects to either any pre-recorded file or apply different effects in real-time. Interestingly, Voxal Voice Changer also lets its users create and customize voice effects without limits.
For gamers, Voxal Voice Changer is an ideal voice changer. This is because the voice changer is compatible with almost all your favorite gaming platforms. The fact that games are heavy, this voice changer does not interfere with any other running applications because it has a low CPU usage.
Moreover, both Windows and Mac users can use Voxal Voice Changer. Do you want to know some cool about this voice changer? Well, Voxal voice changer also has a text-to-speech tool that is fun to use.
Part 2. How to Use Voxal Voice Changer on Discord
If you have been using Discord for a while now, then you must have noticed that people use different voices like robots, aliens, babies, and whatnot. Are you excited to know the secret behind this? People use voice changers to double the fun. You can also use Voxal on Discord to enjoy. The voice changer has some system requirements that are as follows:
System Requirements
- Windows 10, XP, Vista, 7, 8, 8.1 & 11
- Mac OS X 10.5 & above
Step by Step Guide to Use Voxal Voice Changer on Discord
If you are bored with your normal voice, then change it with voice effects. Let us share the steps for your guidance to use Voxal Voice Changer on Discord.
Step 1: Let’s Download Voxal Voice Changer
If you want to use Voxal on Discord, then start by downloading Voxal Voice Changer from its official website. Once the download is complete, you should install the voice changer on your PC or laptop.
Step 2: Launch Voxal Voice Changer
After the software has been installed, you can now launch it. For this, double click on the Voxal icon; this will lead you to its home screen.
Step 3: Open Discord
Now, you have to open Discord on your PC or laptop. Remember not to close the Voxal Voice changer; let it run in the background. This is how Discord will detect the application running in the background and will let you use Voxal on Discord.
Step 4: Open User Settings
After you have accessed your discord account, head to the bottom left side and hit on the ‘User Settings’ option besides your username. Next, select the ‘Voice and Video’ option from the’ App Settings’ section.
Step 5: Set Input Device
You can change and customize your discord voice from Voice and Video section. Under the ‘Input Device’ category, ‘Default’ is selected. You can hit the down arrow can switch it to the ‘Voxal Voice Changer’ device.
Part 3. How to Fix Voxal Voice Changer Not Working
Is your Voxal voice changer not working? Do not panic; we will be discussing a systematic way to check why the Voxal voice changer is not working. You can follow the fixes shared below:
Proper Installation
The error in working might be because of an installation issue as the software might not be installed correctly. You should reinstall the software, which will resolve the issue. It will also help in establishing a better connection for a better user experience.
Selection of Correct Audio Stream
After a successful installation, if you still face any problem, that is because you are not selecting the correct audio stream. You have to select the correct input device, which in this case is Voxal Voice Changer.
Upgradation and Restarting
If the above discussed are not an issue, then your software might need an upgrade. There might be a pending upgrade that affects the working capacity. Whereas, if you have already upgraded the software, then you should restart it.
Active Microphone
The correct audio system has been selected if the installation is complete, and the software is also up to date. However, you still face any issue with Voxal; then your microphone might not be connected properly. Here are the steps to fix this:
Step 1: After you have launched the Voxal Voice changer, tap on the ‘Tools’ section from the top menu bar and select the option of ‘Options.’
Step 2: A pop-up screen will show up; click on the ‘Open Windows Record Mixer’ next to ‘Preview Recording Device.’
Step 3: Another screen will appear; select your microphone by clicking on it. Now, from the bottom left corner, hit the ‘Properties’ option.
Step 4: From the Microphone Properties Array window, head to the ‘Listen’ tab and select the option of ‘Listen to this device.’ Lastly, hit on the ‘OK’ button in all the windows to close them.
Voice Effects
it is also possible that the Voxal voice changer is not applying any effects to your voice. To get rid of this problem, firstly, make sure that you have selected any voice effect. Secondly, ensure that Voxal is receiving proper signals from your microphone. If this is not the case, close both the programs, first open Voxal voice changer, and then open the program where you plan to add voice effects.
Part 4. 3 Best Voxal Voice Changer Alternatives
Although Voxal Voice Changer is a fantastic platform to use on Discord, other voice changers are equally good like Voxal. If you are excited to learn about the alternatives for Voxal voice changer, then let’s begin.
1. Voicemod
Voicemod can be used as an alternative to Discord and replace the Voxal voice changer. The voice changer modifies your voice online. Importantly, the software is compatible with multiple online games, including Fortnite, PUBG, and Minecraft. Windows users can easily use Voicemod and enjoy great things like online chatting and streaming.
It is compatible with Skype, Discord, VRChat, etc. You can change your voice in real-time with amazing effects like alien, chipmunk, baby, police, and whatnot.
2. Clownfish Voice Changer
Ready to learn about the next alternative? The voice changer that supports multiple applications is Clownfish Voice Changer. The voice changer can change your voice on any application that uses a microphone on your computer. The voice changer does not put much load on your CPU, and it doesn’t affect the performance of the computer.
Clownfish voice changer is available for Windows. Among its different voice effects, some are a robot, baby pitch, female pitch, male pitch, and also Darth Vader. The voice changer supports applications like Viber, Discord, Skype, and TeamSpeak.
3. MorphVox
MorphVox is a famous and leading voice changer because of the wide range of features it offers. The voice changer is available as a free tool, MorphVox Junior, and a paid version is also available called MorphVox Pro. The fact that the voice changer can change your voice in real-time is ideal for online communication like Discord and also gaming.
The software is integrated with various sound effects and background tracks. Along with the integrated voices, you can also record your voices. MorphVox has super-fast chatting technology and delivers the best sound quality.
Final Thoughts
For any person who has been looking for ways to use Voxal on Discord, the article is for you. We have discussed Voxal Voice Changer in detail. We shared ways to fix any issue with the Voxal Voice Changer, and also, we shed light on 3 alternatives for Voxal.
Talking of recorded stream videos, they are rough and require editing. For this, let us suggest an awesome software that takes video editing to a new level. We are talking about Wondershare Filmora Video Editor .
You can color match, do split-screen, keyframing, motion tracking, and many more features are offered by Filmora. You can also get various effects, transitions, and elements from its media library.
For Win 7 or later (64-bit)
For macOS 10.12 or later
For Win 7 or later (64-bit)
For macOS 10.12 or later
Part 1. What Is Voxal Voice Changer?
Who doesn’t like to have fun by changing their voice? Voxal Voice Changer always takes the lead when we talk about voice changers. With this voice changer, you can add different sound effects to either any pre-recorded file or apply different effects in real-time. Interestingly, Voxal Voice Changer also lets its users create and customize voice effects without limits.
For gamers, Voxal Voice Changer is an ideal voice changer. This is because the voice changer is compatible with almost all your favorite gaming platforms. The fact that games are heavy, this voice changer does not interfere with any other running applications because it has a low CPU usage.
Moreover, both Windows and Mac users can use Voxal Voice Changer. Do you want to know some cool about this voice changer? Well, Voxal voice changer also has a text-to-speech tool that is fun to use.
Part 2. How to Use Voxal Voice Changer on Discord
If you have been using Discord for a while now, then you must have noticed that people use different voices like robots, aliens, babies, and whatnot. Are you excited to know the secret behind this? People use voice changers to double the fun. You can also use Voxal on Discord to enjoy. The voice changer has some system requirements that are as follows:
System Requirements
- Windows 10, XP, Vista, 7, 8, 8.1 & 11
- Mac OS X 10.5 & above
Step by Step Guide to Use Voxal Voice Changer on Discord
If you are bored with your normal voice, then change it with voice effects. Let us share the steps for your guidance to use Voxal Voice Changer on Discord.
Step 1: Let’s Download Voxal Voice Changer
If you want to use Voxal on Discord, then start by downloading Voxal Voice Changer from its official website. Once the download is complete, you should install the voice changer on your PC or laptop.
Step 2: Launch Voxal Voice Changer
After the software has been installed, you can now launch it. For this, double click on the Voxal icon; this will lead you to its home screen.
Step 3: Open Discord
Now, you have to open Discord on your PC or laptop. Remember not to close the Voxal Voice changer; let it run in the background. This is how Discord will detect the application running in the background and will let you use Voxal on Discord.
Step 4: Open User Settings
After you have accessed your discord account, head to the bottom left side and hit on the ‘User Settings’ option besides your username. Next, select the ‘Voice and Video’ option from the’ App Settings’ section.
Step 5: Set Input Device
You can change and customize your discord voice from Voice and Video section. Under the ‘Input Device’ category, ‘Default’ is selected. You can hit the down arrow can switch it to the ‘Voxal Voice Changer’ device.
Part 3. How to Fix Voxal Voice Changer Not Working
Is your Voxal voice changer not working? Do not panic; we will be discussing a systematic way to check why the Voxal voice changer is not working. You can follow the fixes shared below:
Proper Installation
The error in working might be because of an installation issue as the software might not be installed correctly. You should reinstall the software, which will resolve the issue. It will also help in establishing a better connection for a better user experience.
Selection of Correct Audio Stream
After a successful installation, if you still face any problem, that is because you are not selecting the correct audio stream. You have to select the correct input device, which in this case is Voxal Voice Changer.
Upgradation and Restarting
If the above discussed are not an issue, then your software might need an upgrade. There might be a pending upgrade that affects the working capacity. Whereas, if you have already upgraded the software, then you should restart it.
Active Microphone
The correct audio system has been selected if the installation is complete, and the software is also up to date. However, you still face any issue with Voxal; then your microphone might not be connected properly. Here are the steps to fix this:
Step 1: After you have launched the Voxal Voice changer, tap on the ‘Tools’ section from the top menu bar and select the option of ‘Options.’
Step 2: A pop-up screen will show up; click on the ‘Open Windows Record Mixer’ next to ‘Preview Recording Device.’
Step 3: Another screen will appear; select your microphone by clicking on it. Now, from the bottom left corner, hit the ‘Properties’ option.
Step 4: From the Microphone Properties Array window, head to the ‘Listen’ tab and select the option of ‘Listen to this device.’ Lastly, hit on the ‘OK’ button in all the windows to close them.
Voice Effects
it is also possible that the Voxal voice changer is not applying any effects to your voice. To get rid of this problem, firstly, make sure that you have selected any voice effect. Secondly, ensure that Voxal is receiving proper signals from your microphone. If this is not the case, close both the programs, first open Voxal voice changer, and then open the program where you plan to add voice effects.
Part 4. 3 Best Voxal Voice Changer Alternatives
Although Voxal Voice Changer is a fantastic platform to use on Discord, other voice changers are equally good like Voxal. If you are excited to learn about the alternatives for Voxal voice changer, then let’s begin.
1. Voicemod
Voicemod can be used as an alternative to Discord and replace the Voxal voice changer. The voice changer modifies your voice online. Importantly, the software is compatible with multiple online games, including Fortnite, PUBG, and Minecraft. Windows users can easily use Voicemod and enjoy great things like online chatting and streaming.
It is compatible with Skype, Discord, VRChat, etc. You can change your voice in real-time with amazing effects like alien, chipmunk, baby, police, and whatnot.
2. Clownfish Voice Changer
Ready to learn about the next alternative? The voice changer that supports multiple applications is Clownfish Voice Changer. The voice changer can change your voice on any application that uses a microphone on your computer. The voice changer does not put much load on your CPU, and it doesn’t affect the performance of the computer.
Clownfish voice changer is available for Windows. Among its different voice effects, some are a robot, baby pitch, female pitch, male pitch, and also Darth Vader. The voice changer supports applications like Viber, Discord, Skype, and TeamSpeak.
3. MorphVox
MorphVox is a famous and leading voice changer because of the wide range of features it offers. The voice changer is available as a free tool, MorphVox Junior, and a paid version is also available called MorphVox Pro. The fact that the voice changer can change your voice in real-time is ideal for online communication like Discord and also gaming.
The software is integrated with various sound effects and background tracks. Along with the integrated voices, you can also record your voices. MorphVox has super-fast chatting technology and delivers the best sound quality.
Final Thoughts
For any person who has been looking for ways to use Voxal on Discord, the article is for you. We have discussed Voxal Voice Changer in detail. We shared ways to fix any issue with the Voxal Voice Changer, and also, we shed light on 3 alternatives for Voxal.
Talking of recorded stream videos, they are rough and require editing. For this, let us suggest an awesome software that takes video editing to a new level. We are talking about Wondershare Filmora Video Editor .
You can color match, do split-screen, keyframing, motion tracking, and many more features are offered by Filmora. You can also get various effects, transitions, and elements from its media library.
For Win 7 or later (64-bit)
For macOS 10.12 or later
For Win 7 or later (64-bit)
For macOS 10.12 or later
Part 1. What Is Voxal Voice Changer?
Who doesn’t like to have fun by changing their voice? Voxal Voice Changer always takes the lead when we talk about voice changers. With this voice changer, you can add different sound effects to either any pre-recorded file or apply different effects in real-time. Interestingly, Voxal Voice Changer also lets its users create and customize voice effects without limits.
For gamers, Voxal Voice Changer is an ideal voice changer. This is because the voice changer is compatible with almost all your favorite gaming platforms. The fact that games are heavy, this voice changer does not interfere with any other running applications because it has a low CPU usage.
Moreover, both Windows and Mac users can use Voxal Voice Changer. Do you want to know some cool about this voice changer? Well, Voxal voice changer also has a text-to-speech tool that is fun to use.
Part 2. How to Use Voxal Voice Changer on Discord
If you have been using Discord for a while now, then you must have noticed that people use different voices like robots, aliens, babies, and whatnot. Are you excited to know the secret behind this? People use voice changers to double the fun. You can also use Voxal on Discord to enjoy. The voice changer has some system requirements that are as follows:
System Requirements
- Windows 10, XP, Vista, 7, 8, 8.1 & 11
- Mac OS X 10.5 & above
Step by Step Guide to Use Voxal Voice Changer on Discord
If you are bored with your normal voice, then change it with voice effects. Let us share the steps for your guidance to use Voxal Voice Changer on Discord.
Step 1: Let’s Download Voxal Voice Changer
If you want to use Voxal on Discord, then start by downloading Voxal Voice Changer from its official website. Once the download is complete, you should install the voice changer on your PC or laptop.
Step 2: Launch Voxal Voice Changer
After the software has been installed, you can now launch it. For this, double click on the Voxal icon; this will lead you to its home screen.
Step 3: Open Discord
Now, you have to open Discord on your PC or laptop. Remember not to close the Voxal Voice changer; let it run in the background. This is how Discord will detect the application running in the background and will let you use Voxal on Discord.
Step 4: Open User Settings
After you have accessed your discord account, head to the bottom left side and hit on the ‘User Settings’ option besides your username. Next, select the ‘Voice and Video’ option from the’ App Settings’ section.
Step 5: Set Input Device
You can change and customize your discord voice from Voice and Video section. Under the ‘Input Device’ category, ‘Default’ is selected. You can hit the down arrow can switch it to the ‘Voxal Voice Changer’ device.
Part 3. How to Fix Voxal Voice Changer Not Working
Is your Voxal voice changer not working? Do not panic; we will be discussing a systematic way to check why the Voxal voice changer is not working. You can follow the fixes shared below:
Proper Installation
The error in working might be because of an installation issue as the software might not be installed correctly. You should reinstall the software, which will resolve the issue. It will also help in establishing a better connection for a better user experience.
Selection of Correct Audio Stream
After a successful installation, if you still face any problem, that is because you are not selecting the correct audio stream. You have to select the correct input device, which in this case is Voxal Voice Changer.
Upgradation and Restarting
If the above discussed are not an issue, then your software might need an upgrade. There might be a pending upgrade that affects the working capacity. Whereas, if you have already upgraded the software, then you should restart it.
Active Microphone
The correct audio system has been selected if the installation is complete, and the software is also up to date. However, you still face any issue with Voxal; then your microphone might not be connected properly. Here are the steps to fix this:
Step 1: After you have launched the Voxal Voice changer, tap on the ‘Tools’ section from the top menu bar and select the option of ‘Options.’
Step 2: A pop-up screen will show up; click on the ‘Open Windows Record Mixer’ next to ‘Preview Recording Device.’
Step 3: Another screen will appear; select your microphone by clicking on it. Now, from the bottom left corner, hit the ‘Properties’ option.
Step 4: From the Microphone Properties Array window, head to the ‘Listen’ tab and select the option of ‘Listen to this device.’ Lastly, hit on the ‘OK’ button in all the windows to close them.
Voice Effects
it is also possible that the Voxal voice changer is not applying any effects to your voice. To get rid of this problem, firstly, make sure that you have selected any voice effect. Secondly, ensure that Voxal is receiving proper signals from your microphone. If this is not the case, close both the programs, first open Voxal voice changer, and then open the program where you plan to add voice effects.
Part 4. 3 Best Voxal Voice Changer Alternatives
Although Voxal Voice Changer is a fantastic platform to use on Discord, other voice changers are equally good like Voxal. If you are excited to learn about the alternatives for Voxal voice changer, then let’s begin.
1. Voicemod
Voicemod can be used as an alternative to Discord and replace the Voxal voice changer. The voice changer modifies your voice online. Importantly, the software is compatible with multiple online games, including Fortnite, PUBG, and Minecraft. Windows users can easily use Voicemod and enjoy great things like online chatting and streaming.
It is compatible with Skype, Discord, VRChat, etc. You can change your voice in real-time with amazing effects like alien, chipmunk, baby, police, and whatnot.
2. Clownfish Voice Changer
Ready to learn about the next alternative? The voice changer that supports multiple applications is Clownfish Voice Changer. The voice changer can change your voice on any application that uses a microphone on your computer. The voice changer does not put much load on your CPU, and it doesn’t affect the performance of the computer.
Clownfish voice changer is available for Windows. Among its different voice effects, some are a robot, baby pitch, female pitch, male pitch, and also Darth Vader. The voice changer supports applications like Viber, Discord, Skype, and TeamSpeak.
3. MorphVox
MorphVox is a famous and leading voice changer because of the wide range of features it offers. The voice changer is available as a free tool, MorphVox Junior, and a paid version is also available called MorphVox Pro. The fact that the voice changer can change your voice in real-time is ideal for online communication like Discord and also gaming.
The software is integrated with various sound effects and background tracks. Along with the integrated voices, you can also record your voices. MorphVox has super-fast chatting technology and delivers the best sound quality.
Final Thoughts
For any person who has been looking for ways to use Voxal on Discord, the article is for you. We have discussed Voxal Voice Changer in detail. We shared ways to fix any issue with the Voxal Voice Changer, and also, we shed light on 3 alternatives for Voxal.
Talking of recorded stream videos, they are rough and require editing. For this, let us suggest an awesome software that takes video editing to a new level. We are talking about Wondershare Filmora Video Editor .
You can color match, do split-screen, keyframing, motion tracking, and many more features are offered by Filmora. You can also get various effects, transitions, and elements from its media library.
For Win 7 or later (64-bit)
For macOS 10.12 or later
For Win 7 or later (64-bit)
For macOS 10.12 or later
Part 1. What Is Voxal Voice Changer?
Who doesn’t like to have fun by changing their voice? Voxal Voice Changer always takes the lead when we talk about voice changers. With this voice changer, you can add different sound effects to either any pre-recorded file or apply different effects in real-time. Interestingly, Voxal Voice Changer also lets its users create and customize voice effects without limits.
For gamers, Voxal Voice Changer is an ideal voice changer. This is because the voice changer is compatible with almost all your favorite gaming platforms. The fact that games are heavy, this voice changer does not interfere with any other running applications because it has a low CPU usage.
Moreover, both Windows and Mac users can use Voxal Voice Changer. Do you want to know some cool about this voice changer? Well, Voxal voice changer also has a text-to-speech tool that is fun to use.
Part 2. How to Use Voxal Voice Changer on Discord
If you have been using Discord for a while now, then you must have noticed that people use different voices like robots, aliens, babies, and whatnot. Are you excited to know the secret behind this? People use voice changers to double the fun. You can also use Voxal on Discord to enjoy. The voice changer has some system requirements that are as follows:
System Requirements
- Windows 10, XP, Vista, 7, 8, 8.1 & 11
- Mac OS X 10.5 & above
Step by Step Guide to Use Voxal Voice Changer on Discord
If you are bored with your normal voice, then change it with voice effects. Let us share the steps for your guidance to use Voxal Voice Changer on Discord.
Step 1: Let’s Download Voxal Voice Changer
If you want to use Voxal on Discord, then start by downloading Voxal Voice Changer from its official website. Once the download is complete, you should install the voice changer on your PC or laptop.
Step 2: Launch Voxal Voice Changer
After the software has been installed, you can now launch it. For this, double click on the Voxal icon; this will lead you to its home screen.
Step 3: Open Discord
Now, you have to open Discord on your PC or laptop. Remember not to close the Voxal Voice changer; let it run in the background. This is how Discord will detect the application running in the background and will let you use Voxal on Discord.
Step 4: Open User Settings
After you have accessed your discord account, head to the bottom left side and hit on the ‘User Settings’ option besides your username. Next, select the ‘Voice and Video’ option from the’ App Settings’ section.
Step 5: Set Input Device
You can change and customize your discord voice from Voice and Video section. Under the ‘Input Device’ category, ‘Default’ is selected. You can hit the down arrow can switch it to the ‘Voxal Voice Changer’ device.
Part 3. How to Fix Voxal Voice Changer Not Working
Is your Voxal voice changer not working? Do not panic; we will be discussing a systematic way to check why the Voxal voice changer is not working. You can follow the fixes shared below:
Proper Installation
The error in working might be because of an installation issue as the software might not be installed correctly. You should reinstall the software, which will resolve the issue. It will also help in establishing a better connection for a better user experience.
Selection of Correct Audio Stream
After a successful installation, if you still face any problem, that is because you are not selecting the correct audio stream. You have to select the correct input device, which in this case is Voxal Voice Changer.
Upgradation and Restarting
If the above discussed are not an issue, then your software might need an upgrade. There might be a pending upgrade that affects the working capacity. Whereas, if you have already upgraded the software, then you should restart it.
Active Microphone
The correct audio system has been selected if the installation is complete, and the software is also up to date. However, you still face any issue with Voxal; then your microphone might not be connected properly. Here are the steps to fix this:
Step 1: After you have launched the Voxal Voice changer, tap on the ‘Tools’ section from the top menu bar and select the option of ‘Options.’
Step 2: A pop-up screen will show up; click on the ‘Open Windows Record Mixer’ next to ‘Preview Recording Device.’
Step 3: Another screen will appear; select your microphone by clicking on it. Now, from the bottom left corner, hit the ‘Properties’ option.
Step 4: From the Microphone Properties Array window, head to the ‘Listen’ tab and select the option of ‘Listen to this device.’ Lastly, hit on the ‘OK’ button in all the windows to close them.
Voice Effects
it is also possible that the Voxal voice changer is not applying any effects to your voice. To get rid of this problem, firstly, make sure that you have selected any voice effect. Secondly, ensure that Voxal is receiving proper signals from your microphone. If this is not the case, close both the programs, first open Voxal voice changer, and then open the program where you plan to add voice effects.
Part 4. 3 Best Voxal Voice Changer Alternatives
Although Voxal Voice Changer is a fantastic platform to use on Discord, other voice changers are equally good like Voxal. If you are excited to learn about the alternatives for Voxal voice changer, then let’s begin.
1. Voicemod
Voicemod can be used as an alternative to Discord and replace the Voxal voice changer. The voice changer modifies your voice online. Importantly, the software is compatible with multiple online games, including Fortnite, PUBG, and Minecraft. Windows users can easily use Voicemod and enjoy great things like online chatting and streaming.
It is compatible with Skype, Discord, VRChat, etc. You can change your voice in real-time with amazing effects like alien, chipmunk, baby, police, and whatnot.
2. Clownfish Voice Changer
Ready to learn about the next alternative? The voice changer that supports multiple applications is Clownfish Voice Changer. The voice changer can change your voice on any application that uses a microphone on your computer. The voice changer does not put much load on your CPU, and it doesn’t affect the performance of the computer.
Clownfish voice changer is available for Windows. Among its different voice effects, some are a robot, baby pitch, female pitch, male pitch, and also Darth Vader. The voice changer supports applications like Viber, Discord, Skype, and TeamSpeak.
3. MorphVox
MorphVox is a famous and leading voice changer because of the wide range of features it offers. The voice changer is available as a free tool, MorphVox Junior, and a paid version is also available called MorphVox Pro. The fact that the voice changer can change your voice in real-time is ideal for online communication like Discord and also gaming.
The software is integrated with various sound effects and background tracks. Along with the integrated voices, you can also record your voices. MorphVox has super-fast chatting technology and delivers the best sound quality.
Final Thoughts
For any person who has been looking for ways to use Voxal on Discord, the article is for you. We have discussed Voxal Voice Changer in detail. We shared ways to fix any issue with the Voxal Voice Changer, and also, we shed light on 3 alternatives for Voxal.
Talking of recorded stream videos, they are rough and require editing. For this, let us suggest an awesome software that takes video editing to a new level. We are talking about Wondershare Filmora Video Editor .
You can color match, do split-screen, keyframing, motion tracking, and many more features are offered by Filmora. You can also get various effects, transitions, and elements from its media library.
For Win 7 or later (64-bit)
For macOS 10.12 or later
The Editor’s Guide to Beat Matching: Seamless Integration of Music and Motion in FCPX
How to Edit the Beat and Sync Videos to Music in Final Cut Pro X
Benjamin Arango
Mar 27, 2024• Proven solutions
The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.
Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.
You may also like: How to Make Beats for Your Music Videos
How to Sync Videos to the Beat of a Song in Three Different Ways
Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.
Add Markers Manually and Snap Videos to the Beats of a Song
Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.
Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.
Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.
A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.
Cut to the Beat and Sync Audio with Video in FCPX
Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.
You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.
Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.
You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.
Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.
Generate Beat Markers Automatically with BeatMark X App
Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.
After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.
The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.
A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.
Conclusion
You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .
Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.
The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.
Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.
You may also like: How to Make Beats for Your Music Videos
How to Sync Videos to the Beat of a Song in Three Different Ways
Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.
Add Markers Manually and Snap Videos to the Beats of a Song
Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.
Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.
Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.
A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.
Cut to the Beat and Sync Audio with Video in FCPX
Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.
You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.
Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.
You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.
Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.
Generate Beat Markers Automatically with BeatMark X App
Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.
After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.
The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.
A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.
Conclusion
You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .
Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.
The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.
Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.
You may also like: How to Make Beats for Your Music Videos
How to Sync Videos to the Beat of a Song in Three Different Ways
Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.
Add Markers Manually and Snap Videos to the Beats of a Song
Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.
Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.
Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.
A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.
Cut to the Beat and Sync Audio with Video in FCPX
Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.
You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.
Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.
You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.
Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.
Generate Beat Markers Automatically with BeatMark X App
Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.
After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.
The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.
A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.
Conclusion
You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .
Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.
The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.
Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.
You may also like: How to Make Beats for Your Music Videos
How to Sync Videos to the Beat of a Song in Three Different Ways
Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.
Add Markers Manually and Snap Videos to the Beats of a Song
Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.
Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.
Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.
A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.
Cut to the Beat and Sync Audio with Video in FCPX
Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.
You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.
Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.
You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.
Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.
Generate Beat Markers Automatically with BeatMark X App
Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.
After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.
The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.
A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.
Conclusion
You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .
Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.
The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Also read:
- Updated In 2024, Top 10 Audio Amplifiers Enhance Your Devices Sonic Experience (Android & iOS)
- New 2024 Approved Transform Your Media Experience A Compilation of Premium Online & Offline Conversion Apps (Free)
- Updated Exploring 2023S AV Voice Modification Tools Reviews & Alternatives
- New In 2024, A Symphony for the Ears Ranking the Top 8 Filmmaking Sonic Experiences
- Updated 2024 Approved Cutting Edge Audio Solutions Top Online Sites for Professional-Grade MP3 Modification
- Updated Timeless Tunes Selecting Melodies for Matrimonial Cinematography
- Updated 2024 Approved What Is Omegle, Is Omegle Safe?
- 2024 Approved DualTrackSync The Ultimate Audio Matching Solution for Adobe Premiere Pro Users
- 7 Tips to Record Audio on Chromebook in an Easy Way
- 2024 Approved 5 Leading Digital Audio Workstation Options for Professional Guitarists, Updated
- New 2024 Approved From Bland Visuals to Dynamic Displays Adding Audio Elements to Your Digital Videos
- Updated In 2024, The Ultimate Voice Transformation Handbook Ranking the Leading 11 Speech Alteration Software for Mobile Platforms, No Cost
- New Acoustic Enhancements for Podcasts Top Locations for Sound Libraries
- Updated Unveiling the Secrets to Successful Sound Recording in GarageBand for 2024
- Updated The Audio-Visual Connection Step-by-Step Tutorial for Video Editors for 2024
- The Premier Selection 6 Excellent Voice Alteration Apps for Smartphones for 2024
- Updated 2024 Approved EchoTech Pro Review Series Unveiling the Specs, Standout Aspects, and Comparable Solutions in Sound Engineering
- 2024 Approved Fine-Tuning Tone in Audacity Keeping the Quality Intact While Changing Pitch
- Updated Precision Sound Engineering Harnessing the Power of Keyframes for Audio Fade-Ins/Outs in Filmora (Mac) for 2024
- In 2024, Essential Audio Setups for Personalized Mobile Soundscapes
- Become an Expert at Uncomplicated Podcasting A Stepwise Manual to Success 2023 Guidebook for 2024
- Updated In 2024, The Art of Auditory Elimination Techniques for Taking Out the Chatter in Videos
- Updated In 2024, Inside Lexis Audio Editor Critical Perspectives, Advanced Tutorials, and Expert Insights
- In 2024, Exploring Sources of High-Frequency Glass Disintegration Sounds
- Updated 2024 Approved Find Free Songs for Video Editing
- New In 2024, Stop Mobile Audio Dampening Feature in iOS Settings
- New Optimal Windows 10 Sound Aggregation Ranking the Best Mixers for 2024
- Updated Reducing Noise in Videos Made Easy with Premiere Pro All Workable Met for 2024
- Different Methods for Resetting Motorola Edge 40 Phones with Screen Locked and Not | Dr.fone
- How to enter the iSpoofer discord server On Apple iPhone 13 Pro | Dr.fone
- New 2024 Approved Best Video Editors for Windows 11 Free and Paid
- Updated Ultimate Guide to Movie Trailer Makers for Mac and Windows Users for 2024
- In 2024, New Guide How To Check iCloud Activation Lock Status From Your Apple iPhone XS Max
- Guide How To Unbrick a Bricked Vivo V29 Phone | Dr.fone
- In 2024, Unlock Your Samsung Galaxy S23 Tactical Editions Potential The Top 20 Lock Screen Apps You Need to Try
- How To Check if Your Realme GT 5 (240W) Is Unlocked
- In 2024, The Best iSpoofer Alternative to Try On Vivo V30 Lite 5G | Dr.fone
- Reinstall hardware drivers with Device Manager in Windows 10
- Thinking About Changing Your Netflix Region Without a VPN On Motorola Moto E13? | Dr.fone
- New Shrink Your Videos 5 Top-Rated Free Compression Apps for iOS for 2024
- Updated Top 5 AI Voice Generators Online (Supports All Browsers)
- In 2024, Best Stop Motion Apps for iOS and Android Devices
- In 2024, The Top-Rated Free Video Stabilization Software A Comprehensive Guide
- In 2024, 3 Ways to Track Vivo Y02T without Them Knowing | Dr.fone
- Title: New The Ultimate Technique for Harmonizing Volume in DaVinci Resolve
- Author: David
- Created at : 2024-05-05 09:44:06
- Updated at : 2024-05-06 09:44:06
- Link: https://sound-tweaking.techidaily.com/new-the-ultimate-technique-for-harmonizing-volume-in-davinci-resolve/
- License: This work is licensed under CC BY-NC-SA 4.0.