“Silencing the Noise: How to Normalize Audio Using DaVinci Resolve”

How To Normalize Audio In DaVinci Resolve

It happens a lot of times that we are not satisfied with several details our videos and audios contain, and we need to edit them. One of the most common problems we face is that our volumes are not normalized, and we need to take some extra time in order to achieve the best result for our audiences. Even with little or no knowledge about this very specific topic, we need to inform ourselves and find the solutions, make our videos more watch-able and our audios more listen-able, so to say.

There are several ways the audio normalization is achieved. One type is called peak normalization, helping adjust the recording based on the highest signal level present in the recording; the second is loudness normalization, adjusting the recording based on perceived loudness. RMS (Root-Mean-Square) changes the value of all the samples, where their average electrical volume overall is a specified level.

Mostly, there are two reasons why we should give audio normalization a try. You need to decide yourself, what is your reason and expected outcome when you use audio normalization. First is when your aim is to get the maximum volume, but the second boils down to matching different volumes with each other.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

More concretely, in general, audio normalization is when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, “the norm” for the project. It means that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

You can have the desired result using different kinds of software. Nowadays, a lot of programs offer you the tool which facilitates this process. So, one of them would be DaVinci Resolve, which we are going to discuss in this article.

What is DaVinci Resolve? The description goes: “DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool!” so, let’s discover what this software can do to help us balance the audio!

So, how to balance your audio in DaVinci Resolve? We are going to discuss everything step by step – how to set your target loudness level, how to monitor the loudness, and how you can use the automation feature.

Well, of course, have the program installed and opened. Then, add your video with the audio you want to edit or the audio separately, if that’s what you are aiming to do.

The first step you need to make is to set your target loudness level – for this, find the little settings button on the right bottom of the program and click on it. Now, go down to the Fairlight menu and change the Target Loudness Level. If you are doing the audio normalization for the Youtube content, then it is recommended to set it to -14 LUFS.

Next, you are going to head to the Fairlight page and make sure that your meters are open. the loudness meter is on the right top of the layout of the program, and it goes from +9 to -15 LUFS.

Here, zero represents exactly what our target loudness level is, in this case, as you remember, we set it to -14 LUFS. So, ensure that our loudness is as close as zero as possible on the meter, but you can also make it lower, such as -3. Whenever you play, you will be able to see that there are some numbers popping up to the right of the meter.

The first one, you’ll find, is Short – constantly changing, indicating how far above or below the target loudness level you are at a given time. Short Max tells you how far above or below your target loudness level the loudest point of your video is. Range is a measure of your quietest pick to your loudest peak, and the last one is Integrated – it gives you the overall loudness of your video in relation to your target loudness level. Integrated is the number we aim to keep around -3 or 0.

We can use our main slider (next to the sequence on the right) to make our video louder or quieter until we hit that target loudness level.

Also, there is an automation tool that can help you dial in your loudness. In order to access this feature, find a red icon, looking like a wave with kind of a key frames.

Next, open up your Index (on the far top panel, a little bit from the left), and make sure you are in the tracks menu in your editing index.

What you want to do is to make your main track visible on the timeline, so hit on the eyeball next to your main and go to your timeline, where you will expand your main track until you see your Loudness History options.

Here, you will need to check in the box next to Integrated and turn on the Loudness History. This will show the integrated loudness level, adjust your main track’s volume accordingly, so you are below the zero line. And, that’s actually it!

How to normalize audio in Wondershare Filmora X?

Even though doing this with the help of DaVinci Resolve is really helpful, and, let’s say, sophisticated, you might find it a little complicated, in case you were not so familiar with video/audio editing. So, we would like you to have some information about what alternative you can turn to, and in this case, it’s worth bringing up a software - Wondershare Filmora X . With it, you will find that the same task can be carried out wonderfully. It is also a video editor, but it is one of the easiest to use in the word, supported by Mac and Windows. Filmora offers a great, neat, user-friendly interface, and helps you understand the very basics of editing. Actually, it has not been long since Wondershare Filmora X introduced the feature to normalize the audio. So, you might want download the latest version of Filmora X and start following along the steps we are going to provide for you to understand how audio normalization works on Filmora X .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Free Download For macOS 10.14 or later

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

Fading Audio in Adobe Rush

Liza Brown

Mar 27, 2024• Proven solutions

The importance of music and atmospheric sounds is often underrated in social media videos. A good soundtrack can drastically increase the overall quality of a video since barely audible dialogues or background noises distract a viewer. Even adding simple effects like fade in or fade out can make a huge difference in how well a video is accepted by your friends on social media. If you would like to learn how to fade audio in your videos, you’re at the right place, because in this article we are going to show you how to fade in or fade out an audio clip.

Fading Audio in Adobe Rush

Adobe Rush app that was released a short while ago doesn’t seem to be living up to the high standard we can commonly expect from Adobe’s products. The app doesn’t feature fade in/out options and its audio editing capabilities are limited. The only way you can fade audio with Adobe Rush is to open the project in Adobe Premiere Pro CC, but in order to be able to do so, you have to be subscribed to the Adobe’s Creative Cloud.

WondershareFilmora , on the other hand, offers all tools you’re going to need to produce a YouTube video including the fade in and fade out audio effects at a more affordable price. Here’s how you can fade audio in Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Fading Audio in Wondershare Filmora

1. Import video and audio files into Filmora

Most video clips contain an audio track, but in some cases, you might want to remove the clip’s original audio and replace it with music, narration, dialogue or atmospheric sounds you choose. You can import an audio file into Filmora by clicking on the Import drop-down menu and selecting the Import Media Files option.

Alternatively, you can just drag and drop an audio file from the folder to the Media Panel. Filmora also features a rich library of royalty-free music you can use to select a soundtrack for your video. Drag and drop the video or audio file into the timeline from the Media Panel.

2. Fading audio in Filmora

Method 1: With Audio panel

Clicking on the Edit button, located at the end of the software’s toolbar will grant you the access to the software’s audio panel where you can easily adjust the volume of the clip, select one of Equalizer presets or change the Pitch of the audio file.

Fade in and Fade out sliders are located at the top of the Audio panel and you can drag the handle on the slider or you can insert new Fade in or Fade out values manually in the boxes next to the sliders. You can click play and decide if you like the effect you created before you click OK to confirm the changes.

Method 2: Directly from Timeline

In case you want to fade an audio quickly you can do so directly from the timeline. Just click on the handle at the beginning or the end of the audio file and then drag it to adjust the duration of the effect. Both of Fade in or Fade out handles can be easily moved directly on the timeline, even if you set their values from the Audio Panel.

Filmora features a lot of sound effects, like the Phone Ring, Explosion or Car Horn that can be combined with the Fade in or Fade out effect to create a better soundtrack for your video. When ready, click on the Export button and proceed to choose the video’s resolution, file format or export destination. The software also lets you export MP3 files, which enables you to save all the changes you make while editing an audio file.

Conclusion

Even though Adobe Rush is an app aimed at YouTubers and social media video creators, fading in or out of an audio is still not an option. On the other hand, fading an audio in Filmora is a quick and simple process. Gradually introducing a new music theme or slowly fading the sound as a scene ends can make a social media video sound more professional, and it can help content creators to transition from one scene to the other more smoothly. Do you use Fade in or Fade out effects in your videos often? Leave a comment below and share your experiences with us.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown