Silencing Skew: Advanced Tactics for Rectifying Audio Anomalies and Enhancing Clarity

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Dynamic Sound Design: Modifying Audio Velocity & Frequency in Adobe Rush

How to Change Audio Speed and Pitch in Adobe Rush

Liza Brown

Mar 27, 2024• Proven solutions

Don’t you just hate the sound of your own voice? As much as most of us have perfectly pleasant voices, regardless of how they sound when we hear them played back, sometimes we just don’t have a good quality voice for video making.

Some people try to get around this by relying on the written word. While that’s OK in some situations, it’s just not as engaging as a high-quality voiceover. So, what can you do?

Many video makers have found great success in altering their voice ever so slightly. If they have a tendency to garble, slowing things down can help them get their point across better. Similarly, if they have a somewhat squeaky voice, adjusting the tone down a couple of notches can make them appear more authoritative.

Good video editing tools will allow you to play with the speed and pitch of your audio recordings, and not just voices either. Perhaps you want to jazz up a piece of music by playing it faster or add a playful element to your video by cranking the pitch of the music up to chipmunk levels.

Whatever you have in mind, being able to edit the speed and tone of audio in our videos opens up a world of possibilities for voiceover, music and more.

Adjusting speed and pitch in Adobe Rush

We were excited to see what Adobe had in store for us as soon as they started talking about Rush. Branded a tool for the social media generation, it promised incredible usability, effortless integration with a variety of platforms and all the wonderful editing powers that Adobe are renowned for.

However, there have been more than a few oversights in what Adobe actually produced.

Users have complained that its slow, that rendering takes too long and that the software can be unstable. Worse than that, it seems that a number of key features are missing, such as being able to adjust the speed of video and to change the pitch and speed of audio too.

In short, if you’re looking for a way to edit audio to be slower or faster, higher or lower in Adobe Rush, you simply can’t. However, there is an alternative.

From the team at Wondershare comes a package known as Filmora ; an all in one video editing suite designed to do everything you need, and more. Within the capabilities of this software is the ability to edit your audio’s pitch and speed, so that you can create the perfect auditory accompaniment to your movies and videos.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

How to edit audio in Filmora

Using the tools built into Filmora, you can change the pitch and speed of audio in just a few clicks. The function works on all imported audio, whether its attached to the video, recorded separately or is music that you’ve added to your library.

We’ll talk you thorough how to use these editing tools, so that you know you’ve got an alternative to Adobe Rush.

The easiest way to edit the pitch of the audio in Filmora is to use the edit button on the control panel. Highlight the clip you want to edit, then use the button which features three lines with sliders.

Clicking this button will open up the edit menu, which allows you to edit video, audio, color and motion. Within the audio edit, you can fade the soundtrack in and out, can alter the pitch and can adjust the volume and equalizer settings too.

Within this menu, a handy tool will allow you to ‘remove background noise’ also. You can also set audio to fade in or out and can adjust the equalizer to suit the type of audio you’re working with.

To change the speed of the audio along with the pictures, you can use the speedometer button above your track. You can also right click the clip and choose ‘Speed and duration’, or even use the shortcut ctrl+R to open the speed change menu directly.

If you wish to change the speed of the audio without changing the video at all, you’ll need to detach the audio from the video clip. This is simple; just right click the clip in question and select ‘Detach Audio’. You can now edit the audio independently of the video.

Of course, if you’re working on audio which is standalone, e.g. a voiceover or some music you want to play with your video, there’s no requirement to detach it from any video clip.

On the right-hand side of the screen, you’ll also discover the Audio Mixer, in the button with the musical notes on it. Clicking on this brings up an advanced audio adjuster, which can help you create a better audio quality for your video.

This allows you to adjust the specific settings of the videos you’ve uploaded, as well as any additional audio tracks you’ve added to your project. You can work in stereo or surround sound and can control the direction of all the audio within the mixer.

Wondershare Filmora has managed to not only provide a service Adobe has not, they’ve made it super easy too. Why don’t you try out the free version of Filmora for yourself and see why we recommend this for all your video editing needs.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Don’t you just hate the sound of your own voice? As much as most of us have perfectly pleasant voices, regardless of how they sound when we hear them played back, sometimes we just don’t have a good quality voice for video making.

Some people try to get around this by relying on the written word. While that’s OK in some situations, it’s just not as engaging as a high-quality voiceover. So, what can you do?

Many video makers have found great success in altering their voice ever so slightly. If they have a tendency to garble, slowing things down can help them get their point across better. Similarly, if they have a somewhat squeaky voice, adjusting the tone down a couple of notches can make them appear more authoritative.

Good video editing tools will allow you to play with the speed and pitch of your audio recordings, and not just voices either. Perhaps you want to jazz up a piece of music by playing it faster or add a playful element to your video by cranking the pitch of the music up to chipmunk levels.

Whatever you have in mind, being able to edit the speed and tone of audio in our videos opens up a world of possibilities for voiceover, music and more.

Adjusting speed and pitch in Adobe Rush

We were excited to see what Adobe had in store for us as soon as they started talking about Rush. Branded a tool for the social media generation, it promised incredible usability, effortless integration with a variety of platforms and all the wonderful editing powers that Adobe are renowned for.

However, there have been more than a few oversights in what Adobe actually produced.

Users have complained that its slow, that rendering takes too long and that the software can be unstable. Worse than that, it seems that a number of key features are missing, such as being able to adjust the speed of video and to change the pitch and speed of audio too.

In short, if you’re looking for a way to edit audio to be slower or faster, higher or lower in Adobe Rush, you simply can’t. However, there is an alternative.

From the team at Wondershare comes a package known as Filmora ; an all in one video editing suite designed to do everything you need, and more. Within the capabilities of this software is the ability to edit your audio’s pitch and speed, so that you can create the perfect auditory accompaniment to your movies and videos.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

How to edit audio in Filmora

Using the tools built into Filmora, you can change the pitch and speed of audio in just a few clicks. The function works on all imported audio, whether its attached to the video, recorded separately or is music that you’ve added to your library.

We’ll talk you thorough how to use these editing tools, so that you know you’ve got an alternative to Adobe Rush.

The easiest way to edit the pitch of the audio in Filmora is to use the edit button on the control panel. Highlight the clip you want to edit, then use the button which features three lines with sliders.

Clicking this button will open up the edit menu, which allows you to edit video, audio, color and motion. Within the audio edit, you can fade the soundtrack in and out, can alter the pitch and can adjust the volume and equalizer settings too.

Within this menu, a handy tool will allow you to ‘remove background noise’ also. You can also set audio to fade in or out and can adjust the equalizer to suit the type of audio you’re working with.

To change the speed of the audio along with the pictures, you can use the speedometer button above your track. You can also right click the clip and choose ‘Speed and duration’, or even use the shortcut ctrl+R to open the speed change menu directly.

If you wish to change the speed of the audio without changing the video at all, you’ll need to detach the audio from the video clip. This is simple; just right click the clip in question and select ‘Detach Audio’. You can now edit the audio independently of the video.

Of course, if you’re working on audio which is standalone, e.g. a voiceover or some music you want to play with your video, there’s no requirement to detach it from any video clip.

On the right-hand side of the screen, you’ll also discover the Audio Mixer, in the button with the musical notes on it. Clicking on this brings up an advanced audio adjuster, which can help you create a better audio quality for your video.

This allows you to adjust the specific settings of the videos you’ve uploaded, as well as any additional audio tracks you’ve added to your project. You can work in stereo or surround sound and can control the direction of all the audio within the mixer.

Wondershare Filmora has managed to not only provide a service Adobe has not, they’ve made it super easy too. Why don’t you try out the free version of Filmora for yourself and see why we recommend this for all your video editing needs.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Don’t you just hate the sound of your own voice? As much as most of us have perfectly pleasant voices, regardless of how they sound when we hear them played back, sometimes we just don’t have a good quality voice for video making.

Some people try to get around this by relying on the written word. While that’s OK in some situations, it’s just not as engaging as a high-quality voiceover. So, what can you do?

Many video makers have found great success in altering their voice ever so slightly. If they have a tendency to garble, slowing things down can help them get their point across better. Similarly, if they have a somewhat squeaky voice, adjusting the tone down a couple of notches can make them appear more authoritative.

Good video editing tools will allow you to play with the speed and pitch of your audio recordings, and not just voices either. Perhaps you want to jazz up a piece of music by playing it faster or add a playful element to your video by cranking the pitch of the music up to chipmunk levels.

Whatever you have in mind, being able to edit the speed and tone of audio in our videos opens up a world of possibilities for voiceover, music and more.

Adjusting speed and pitch in Adobe Rush

We were excited to see what Adobe had in store for us as soon as they started talking about Rush. Branded a tool for the social media generation, it promised incredible usability, effortless integration with a variety of platforms and all the wonderful editing powers that Adobe are renowned for.

However, there have been more than a few oversights in what Adobe actually produced.

Users have complained that its slow, that rendering takes too long and that the software can be unstable. Worse than that, it seems that a number of key features are missing, such as being able to adjust the speed of video and to change the pitch and speed of audio too.

In short, if you’re looking for a way to edit audio to be slower or faster, higher or lower in Adobe Rush, you simply can’t. However, there is an alternative.

From the team at Wondershare comes a package known as Filmora ; an all in one video editing suite designed to do everything you need, and more. Within the capabilities of this software is the ability to edit your audio’s pitch and speed, so that you can create the perfect auditory accompaniment to your movies and videos.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

How to edit audio in Filmora

Using the tools built into Filmora, you can change the pitch and speed of audio in just a few clicks. The function works on all imported audio, whether its attached to the video, recorded separately or is music that you’ve added to your library.

We’ll talk you thorough how to use these editing tools, so that you know you’ve got an alternative to Adobe Rush.

The easiest way to edit the pitch of the audio in Filmora is to use the edit button on the control panel. Highlight the clip you want to edit, then use the button which features three lines with sliders.

Clicking this button will open up the edit menu, which allows you to edit video, audio, color and motion. Within the audio edit, you can fade the soundtrack in and out, can alter the pitch and can adjust the volume and equalizer settings too.

Within this menu, a handy tool will allow you to ‘remove background noise’ also. You can also set audio to fade in or out and can adjust the equalizer to suit the type of audio you’re working with.

To change the speed of the audio along with the pictures, you can use the speedometer button above your track. You can also right click the clip and choose ‘Speed and duration’, or even use the shortcut ctrl+R to open the speed change menu directly.

If you wish to change the speed of the audio without changing the video at all, you’ll need to detach the audio from the video clip. This is simple; just right click the clip in question and select ‘Detach Audio’. You can now edit the audio independently of the video.

Of course, if you’re working on audio which is standalone, e.g. a voiceover or some music you want to play with your video, there’s no requirement to detach it from any video clip.

On the right-hand side of the screen, you’ll also discover the Audio Mixer, in the button with the musical notes on it. Clicking on this brings up an advanced audio adjuster, which can help you create a better audio quality for your video.

This allows you to adjust the specific settings of the videos you’ve uploaded, as well as any additional audio tracks you’ve added to your project. You can work in stereo or surround sound and can control the direction of all the audio within the mixer.

Wondershare Filmora has managed to not only provide a service Adobe has not, they’ve made it super easy too. Why don’t you try out the free version of Filmora for yourself and see why we recommend this for all your video editing needs.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Don’t you just hate the sound of your own voice? As much as most of us have perfectly pleasant voices, regardless of how they sound when we hear them played back, sometimes we just don’t have a good quality voice for video making.

Some people try to get around this by relying on the written word. While that’s OK in some situations, it’s just not as engaging as a high-quality voiceover. So, what can you do?

Many video makers have found great success in altering their voice ever so slightly. If they have a tendency to garble, slowing things down can help them get their point across better. Similarly, if they have a somewhat squeaky voice, adjusting the tone down a couple of notches can make them appear more authoritative.

Good video editing tools will allow you to play with the speed and pitch of your audio recordings, and not just voices either. Perhaps you want to jazz up a piece of music by playing it faster or add a playful element to your video by cranking the pitch of the music up to chipmunk levels.

Whatever you have in mind, being able to edit the speed and tone of audio in our videos opens up a world of possibilities for voiceover, music and more.

Adjusting speed and pitch in Adobe Rush

We were excited to see what Adobe had in store for us as soon as they started talking about Rush. Branded a tool for the social media generation, it promised incredible usability, effortless integration with a variety of platforms and all the wonderful editing powers that Adobe are renowned for.

However, there have been more than a few oversights in what Adobe actually produced.

Users have complained that its slow, that rendering takes too long and that the software can be unstable. Worse than that, it seems that a number of key features are missing, such as being able to adjust the speed of video and to change the pitch and speed of audio too.

In short, if you’re looking for a way to edit audio to be slower or faster, higher or lower in Adobe Rush, you simply can’t. However, there is an alternative.

From the team at Wondershare comes a package known as Filmora ; an all in one video editing suite designed to do everything you need, and more. Within the capabilities of this software is the ability to edit your audio’s pitch and speed, so that you can create the perfect auditory accompaniment to your movies and videos.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

How to edit audio in Filmora

Using the tools built into Filmora, you can change the pitch and speed of audio in just a few clicks. The function works on all imported audio, whether its attached to the video, recorded separately or is music that you’ve added to your library.

We’ll talk you thorough how to use these editing tools, so that you know you’ve got an alternative to Adobe Rush.

The easiest way to edit the pitch of the audio in Filmora is to use the edit button on the control panel. Highlight the clip you want to edit, then use the button which features three lines with sliders.

Clicking this button will open up the edit menu, which allows you to edit video, audio, color and motion. Within the audio edit, you can fade the soundtrack in and out, can alter the pitch and can adjust the volume and equalizer settings too.

Within this menu, a handy tool will allow you to ‘remove background noise’ also. You can also set audio to fade in or out and can adjust the equalizer to suit the type of audio you’re working with.

To change the speed of the audio along with the pictures, you can use the speedometer button above your track. You can also right click the clip and choose ‘Speed and duration’, or even use the shortcut ctrl+R to open the speed change menu directly.

If you wish to change the speed of the audio without changing the video at all, you’ll need to detach the audio from the video clip. This is simple; just right click the clip in question and select ‘Detach Audio’. You can now edit the audio independently of the video.

Of course, if you’re working on audio which is standalone, e.g. a voiceover or some music you want to play with your video, there’s no requirement to detach it from any video clip.

On the right-hand side of the screen, you’ll also discover the Audio Mixer, in the button with the musical notes on it. Clicking on this brings up an advanced audio adjuster, which can help you create a better audio quality for your video.

This allows you to adjust the specific settings of the videos you’ve uploaded, as well as any additional audio tracks you’ve added to your project. You can work in stereo or surround sound and can control the direction of all the audio within the mixer.

Wondershare Filmora has managed to not only provide a service Adobe has not, they’ve made it super easy too. Why don’t you try out the free version of Filmora for yourself and see why we recommend this for all your video editing needs.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Also read: