The Ultimate List of Cost-Free Digital Sound Balancing Apps

What is Audio Normalization, what are its different types, why do we need it and how to do it online? – these are the questions we might ask when first learning about it. Well, then, let’s answer all of them!

Audio Normalization means that the loudest parts of an audio signal are set to a specific value. For example, -18 dBFS (decibels relative to full scale). This is done so that all the parts of the sound mix remain at equal volume levels.

You can use this tool when mixing or editing your music, or during playback on your speakers. In the case of mixing, listen for any clipping (A form of waveform distortion - It sounds like the audio is starting to ‘break up,’ which is light distortion. The more severe it is, the more distorted the music begins to sound) that could occur in your mix. So, in this case, you need to normalize before it becomes too loud and needs more and more fixing. So, normalizing the audio kind of means balancing the volume of the track.

Mostly, audio normalizers are used for balancing out the volume of music, podcast, or other audio recordings. Whenever you have a variety of audio clips that would sound too loud or soft if listened to together, an audio normalizer helps you create a more cohesive listening experience. So, why, and when, do we need to normalize our tracks?

• To make different music styles sound more cohesive;
• To adjust the volume of podcast to be at a consistent level with one another
• To remove sharp spikes in volume for consistent listening experience for our audiences

So, what are the types of audio normalization? Here you have it:

• peak normalization - helps adjust the recording based on the highest signal level present in the recording;
• loudness normalization - adjusts the recording based on perceived loudness;
• RMS (Root-Mean-Square) - changes the value of all the samples, where their average electrical volume overall is a specified level.

So, say that if you are a creator and have listeners, with this tool, you can count on the expectation that people will more likely want to convert to being loyal subscribers, viewers and listeners. This is what happens when audiences feel their user experience is favored and they enjoy a good content – it makes them come back for more.

But sometimes you don’t have so much time that would allow you to find a software, download its installer, install it, learn how to navigate inside its interface, which might be totally new and in some cases, complicated for you, and learn how to normalize your audio files there. In this case, you might want to find the right tools which would enable you to reach your goal without even having to install anything – simple and fast!

Hence, for this case, we would like to offer you the list of 10 best free online audio normalizers. The list goes:

1. MP3 Gain Volume Changer
2. Sodaphonic
3. Audio Mass
4. Audio Online Convert
5. Audio Editor
6. fConvert Online Converter
7. Boost MP3 Volume
8. MP3Cut Change Volume
9. Audio Alter Volume Changer
10. Audio Trimmer Volume Booster

Therefore, let’s delve into each one of them, and learn how to use those online editors in our favor!

MP3 Gain Volume Changer

This online editor allows you to adjust the volume level of MP3 audio files fast – it can raise, lower, and normalize the volume level of your MP3 files.

The interface is simple and easy to use – exactly what you must be looking for. You can adjust the volume level to make the MP3 the way you want to listen to it.

One of the important things this app is letting you do is to upload from Google Drive or Desktop – it works locally without going through a server, and this means that MP3s do not need to be uploaded to any server.

So, go to this link . Click on Choose Files and find the audio clip you would like to normalize.

Now, once your audio track is added, head a little below and find the options you have.

Here, you can decide what do really do with your file: do you want to increase or decrease the volume? If you choose automatic normalization, the app will figure something out itself! And, look at the right side – in case you know well your decibels, you can choose how many decibels to apply. But the web-site itself says that 3.0 decibels is recommended, so it would be nice to just stick with it.

If you have multiple files and you want to normalize them all at once, click on Create MP3 (All); in case you have a lot of files and you would like to normalize one or more of them but not all, then your best choice would be Create MP3 (Selected). Another option is that you save your file on Google Drive.

When you Create your file(s), the normalized one(s) will appear under those buttons in Progress Log, and you can Play right away, or Download and listen to it later on.

Sodaphonic

Sodaphonic also lets you edit your audio files online. With the help of this editor, you can cut, copy, and paste sound segments of an audio. It offers you: normalizing audio, using audio effects, time-stretching, reversing audio, fade-in and fade-out – those tools are really helpful.

Sodaphonic is pretty interesting as the first thing that meets the eye is that it lets you not only pick or drop an audio file there, but record something new, too!

Any option you choose, then when proceeding into the editor, you will see your file waveform there. In order to normalize the audio, on the top left, find Edit, put a cursor on it, and you will see the menu appear. Find Normalize and click on it.

A little window will appear, where you need to fill in how many decibels should be set as the max peak.

Once you do this and click on Normalize, your file will now be affected, and you can also compare the waveform – it is now a little different, isn’t it?

So, when you are happy with the result, just go to File, and Choose Export.

Audio Mass

The Audio Mass editor will help you edit audio and waveforms over the web. There, you can load any audio format your browser supports, and apply many different audio effects (fading in, cutting, trimming…)

So, Audio Mass lets you: normalize audio, analyze frequency, signal distortion and peaking, trim, past, cut audio segments, reversing and inverting audio, convert to MP3, change of volume levels, fade in and fade out, audio compressor, adding reverb, delay, distortion.

When you go to the web-site , you can choose your desired file right away and the site will open it in a waveform. Now, the Normalize option is in the Effects (in the menu on the top). Click on it.

The window opened will show the option to Normalize Left and Right Equally, and it also doesn’t give you decibels – instead, you can choose the percentage on how you would like it to be normalized.

Then, surely, click on the Normalize Audio button and enjoy the result – the waveform itself will show you how different the file becomes…

Audio online convert

This is the tool mostly to be used to convert to different audio formats. In the process if converting audio, you will be able to normalize audio too, as well as change bitrate, sample rate, audio channels, and more.

Go to Audio Online Convert . Of course, click on Choose File and find the track you want to normalize.

Below, you have some settings you can work on, which we have already mentioned. So, if we focus on our article’s topic, you need to find the option Normalize audio, and check the box there. Then, click to Start and the web-site will work on the track according to what you decided to change there. You will have a little while your file is being processed.

So, when it is completed and your file is ready, just click on Download and you are ready to use it as you like.

Audio editor

The DikTorov Audio Editor is an online app to edit audio, normalize audio, or fade in / out audio. It offers: real-time editing and playback of audio files, supports all popular audio formats, and exports as WAV.

Go to the web-site , choose your file and drag it in the blue space in the center.

Now, find the blue Normalize Volume button on the top form the audio waveform, notice that on the right of it, you can change the dBs, and fill in your desired max peak decibel. Then, click on the button Normalize Volume, and the setting will be applied onto your track.

fConvert Online Converter

fConvert is an audio converter service that converts any audio file to any format. There, you can: normalize audio, change sample rate, change file format.

Go to the fConvert , Choose File from your computer, do the settings, and don’t forget to check in the box next to Normalize at the end of the settings.

For the conversion process to start, click on fConvert. Then, scroll down a little, and you’ll find that there is a Result you can already download!

Boost MP3 Volume

The MP3 Volume tool can increase or decrease the volume of any MP3 file online, change file from 1 to 25 decibels, and adjust one or both audio channels.

Open the web-site in your browser, select MP3 file, which should be no more than 150 MB, and take care of the settings.

So, as we mentioned, here you can increase or decrease the volume, and choose your desired max peak (3 decibels recommended everywhere!), and select channels – both or only right or left.

Then, click on Submit Now, wait a little while your file is being uploaded, and once it is finished, you will see the download link on the top of the settings box.

MP3Cut Change Volume

The volume changer app lets you increase audio volume while maintaining the original audio quality. It supports all audio file formats including MP3, M4A, WAV, M4R, FLAC… as an audio converter, it lets you save files in any desired format. Of course, it doesn’t require that you have any technical skills, just move the slider to adjust the volume. It’s very easy to use and offers unlimited file size.

Open MP3Cut , and click on Open file.

Now, instead of Normalize, in this case, you will have to look for the word Equalizer, which you can find in Audio Tools on the top menu. Click on it, wait, and you will see the sliders appear below the waveform of the track.

The sophisticated app also lets you choose the options to select the one most compatible with your audio track, such as: Default (it can be anything, surely), Classic, Dance, Laptop speakers, Live, Party, etc…

You can equalize your track by playing around with the sliders, and then save the result when you are satisfied with the result.

Audio Alter Volume Changer

You can raise or lower the volume of any audio file using this free online tool. Its main advantages are that it’s fast and easy to use, and supports MP4, WAV, FLAC, OGG.

After opening the web-site , now click on Browse computer button to select your file. It will prepare your file and as in most cases, the waveform will appear.

Below, there is a decibels line, where you can once again select your desired max peak dB.

After you have set your dB to the desired amount, click on Submit and wait while your file is being processed. After that, when the audio is converted, you can download it, and also, go back to the main page and edit another file.

Audio Trimmer Volume Booster

This is a free online audio file volume booster. With it, you can very easily increase the volume of songs and make your MP3s louder. Supported formats are: MP3, WAV, WMA, OGG, M4R, M4A, FLAC, AIFF.

Open the site , and find a black line where you will see the option to upload your track. Click on Choose File and select your desired track from your computer.

Now, on the right side under the black line where we uploaded our file, you can see the Loudness options. Click on it and choose from the following: Mild, Moderate, High, and Extreme. Once you have chosen, click on Boost Volume. It will process and in a few seconds, you will have your file ready for download!

Normalize audio in Wondershare Filmora X

Now, even though we already know 10 (which is a lot!) free online normalizers, and we really hope you will be able to choose among them and reach your goal in an easy way, it might be even better if we know some more about normalizing audios using a software.

It is almost as easy to use, but what if you need some more editing opportunities, and with a simple interface? – in this case, worth discussing is a software called Wondershare Filmora X , which helps us have a wonderful, and share-able results. (as the name itself suggests!) It is an actual video editor, and many people all around the world enjoy its presence, especially the ones who don’t want to use a program so sophisticated and complicated for them to require learning for months, but try to have some main editing tools at hand. Filmora operates on Mac and Windows, its interface is very easily understandable for beginners right away. It’s worth noting that not a long ago, Wondershare Filmora X introduced the feature to normalize the audio for the first time. So, go on, download the latest version of Filmora X, and follow along the detailed step by step guideline to normalize audio there!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Click and drag the video of which the audio you want to normalize. Select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

You will see that there is a kind of graphic before your eyes, and if you can see that the waveform is not so equal, you can be pretty sure without even listening, that the noises are so much different from each other, which makes us understand once more, how useful and sometimes, even necessary, audio normalization can be:

Select the files you want to balance, right-click and click on Adjust Audio. New panel will be opened on left top and there, you will see Auto Normalization appear – check the box next to it.

After you have clicked on it, wait until the normalization completes.

With it being done, all your audio clips will be normalized, you will now be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is not a noticeable difference between how they really sound. So, now you can just go and save the file you have just normalized!

So, in this article, we have learned about audio normalization, we have answered some questions about what it is, why and when do we need it, which are the 10 best online editors that will help us normalize our audio tracks without really wasting a lot of time and installing a software, but we also touched upon one software Wondershare Filmora X which can help us carry out the same task in no time. The best thing we can learn from this article is that there are just countless ways of doing one thing, and in today’s world, we are full of resources to reach our targets and aims. So, we hope this article helped you choose your favorite tool, and facilitate working on the audios for you – until next time!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Click and drag the video of which the audio you want to normalize. Select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

You will see that there is a kind of graphic before your eyes, and if you can see that the waveform is not so equal, you can be pretty sure without even listening, that the noises are so much different from each other, which makes us understand once more, how useful and sometimes, even necessary, audio normalization can be:

Select the files you want to balance, right-click and click on Adjust Audio. New panel will be opened on left top and there, you will see Auto Normalization appear – check the box next to it.

After you have clicked on it, wait until the normalization completes.

With it being done, all your audio clips will be normalized, you will now be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is not a noticeable difference between how they really sound. So, now you can just go and save the file you have just normalized!

So, in this article, we have learned about audio normalization, we have answered some questions about what it is, why and when do we need it, which are the 10 best online editors that will help us normalize our audio tracks without really wasting a lot of time and installing a software, but we also touched upon one software Wondershare Filmora X which can help us carry out the same task in no time. The best thing we can learn from this article is that there are just countless ways of doing one thing, and in today’s world, we are full of resources to reach our targets and aims. So, we hope this article helped you choose your favorite tool, and facilitate working on the audios for you – until next time!

MP3 Dissection & Reassembly Utility for Online Users

Online Audio & Mp3 Cutter, Audio Trimmer is a simple online tool which lets you trim your audio files on the fly. Choose your file and click Upload to get started! Uploaded files are stored in a temporary folder and automatically removed from the server within two hours.

It always makes me exciting that we can cut MP3 files and merge several parts into one file using those mp3 cutter and joiner software. For example, nowadays most people use MP3 cutter software to cut the best part of a song as their ringtones or cut the best part of many different songs and merge them into one song. And here’s a list of best free 8 mp3 cutter and joiner software recommend for you. These let you cut pieces of audio from audio files easily. These free software offer various features, like cutting MP3 audio files, fade in and fade out, choosing start point and end point, create ringtones for mobile phones from audio files, create various sound clips for presentations, making of audio books, making of jokes etc

Filmora Audio Recorder

Record computer system audio

Capture microphone audio

Customize recording volume

Record screen and webcam as well

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Try It Free Try It Free

1. AudioTrimmer

Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.

Steps on Using AudioTrimmer

1. Click and navigate to AudioTrimmer’s online audio removal tool to get started.
2. Choose an audio file from your device.
3. On the next screen, click the **Modebutton and put the tool into “Remove” mode.
4. Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
5. Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
6. Now you can download your new shortened song.

2. AUDIO JOINER

Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.

Steps on Using Audio Joiner

Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.

1. Start by clicking on “Add Tracks”

2. Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.

3. Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.

4. Just wait for it to join the files and.

5. Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.

3. AUDIO JOINER

Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.

Steps to Follow While Using an Audio Joiner

1. Open Online Audio Joiner website.
2. Add audio tracks.
3. Set the order of playback.
4. Adjust the intervals.
5. Select the mode of joining.
6. Next, click the “Join” button.
7. After the tracks have been joined, click “Download” link to save the composition on your hard drive.

4.ONLINE AUDIO JOINER

The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?

When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.

How to Merge Audio Files Online

STEP 1

Select an audio file

To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.

STEP 2

Combine MP3 and other audio

If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.

STEP 3

Save the result

And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.

CONCLUSION

Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.

Achieving Balanced Video Audios: Four Essential Techniques

How to Adjust Audio Volume in Videos [4 Ways]

Shanoon Cox

Mar 27, 2024• Proven solutions

Some of the greatest film directors of all time have used sound to make the scenes in their movies more dramatic, romantic or to build suspense. The importance of sound for the overall quality of a video is often overlooked by young filmmakers, as they tend to dedicate all of their attention to the visual part of their projects.

The fact of the matter is that even a minor error in the video’s soundtrack can distract the viewer and ruin a video completely. That’s why, in this article, we are going to show you four different methods of adjusting the audio volume in Filmora.

To increse the volume of your video, click here.

Four Ways of Adjusting Audio Volume in Filmora

The audio clips often have different volume levels, so in order to create a balanced soundtrack, you have to adjust the volume of each audio track you intend to use in your projects. Filmora offers several different ways to adjust the volume of audio files quickly and effortlessly. Here’s how you can increase or decrease the volume of the audio clips in Filmora.

Download Filmora and watch the video below to get a full knowledge abtou adjusting volume!

1. Changing the Audio Volume of Entire Track

This is probably the easiest and fastest way to adjust the volume of a video or an audio file in Filmora. After you import the file into a project you just have to add it to a certain position on the timeline. You can do this by simply dragging and dropping the file at the location on the timeline where you want the file to be placed. Click on the Add Track menu that is located in the upper left corner of the timeline and select the Big option from the Adjust Track Height submenu.

Enlarging the video and audio tracks will enable you to see the audio volume line that is displayed over all clips that contain sound you add to the timeline. Click on the line and drag it upwards if you would like to increase the volume or drag it downwards if you want to decrease the volume of an audio or a video file.

2. Applying the Fade In and Fade Out Effects to Change the Audio Volume Partially

Once you add an audio clip to an audio track on Filmora’s timeline, you can adjust its volume from the Audio Editing panel. Double-clicking on an audio file will bring up the Audio Editing panel that contains Fade In and Fade Out sliders. Both sliders are going to be set to zero by default, so you just have to drag each of them to the right in order to create the Fade In or Fade Out effect.

Filmora also lets you create the Fade In and Fade Out effect directly from the timeline, as you just have to hover the mouse over an audio file and drag the Fade In or Fade Out markers to set the duration of the effect for that particular file.

3. Using the Volume Slider to Change the Audio Volume

On the left side of the Audio Editing panel that can be accessed by double clicking on an audio file, you will be able to see the volume slider. Its value is going to be set to 0 dB by default and you just have to drag it upward or downward in order to adjust the audio volume. As you drag the slider the new audio volume value is going to be displayed in a box below the slider. The left/right balance value can be adjusted by dragging the knob that is located above the volume slider in either direction. Alternatively, you can insert a new numerical value in the box below the knob. If the displayed value is 0 dB, then the left and right channels are balanced, while the value of -100 dB means that all the sound goes through the left channel and if the displayed value is 100 dB all the sound will go through the right channel.

4. Adding Keyframes to Adjust the Audio Volume

Once you add an audio file to the timeline you can adjust its volume by adding keyframes to it. Place the playhead to the exact spot in the audio file where you want to add the first keyframe and then double click on the file to bring up the Audio Editing panel. Click on the Add Volume Keyframes icon and use the volume slider to adjust the volume at the position of the first keyframe.

Simply move the playhead and change the value on the volume slider to add new keyframes to the audio file. This method of adjusting audio volume enables you to set different volume values for different parts of an audio file.

Still not solved? Try this audio guide of Filmora to settle all the audio problems.

Conclusion

Having complete control over the volume of all audio files you use in your projects is important for so many different reasons. Filmora offers four easy ways to adjust the audio volume so you can focus on more important tasks. Which method of adjusting the audio volume in Filmora do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Some of the greatest film directors of all time have used sound to make the scenes in their movies more dramatic, romantic or to build suspense. The importance of sound for the overall quality of a video is often overlooked by young filmmakers, as they tend to dedicate all of their attention to the visual part of their projects.

The fact of the matter is that even a minor error in the video’s soundtrack can distract the viewer and ruin a video completely. That’s why, in this article, we are going to show you four different methods of adjusting the audio volume in Filmora.

To increse the volume of your video, click here.

Four Ways of Adjusting Audio Volume in Filmora

The audio clips often have different volume levels, so in order to create a balanced soundtrack, you have to adjust the volume of each audio track you intend to use in your projects. Filmora offers several different ways to adjust the volume of audio files quickly and effortlessly. Here’s how you can increase or decrease the volume of the audio clips in Filmora.

Download Filmora and watch the video below to get a full knowledge abtou adjusting volume!

1. Changing the Audio Volume of Entire Track

This is probably the easiest and fastest way to adjust the volume of a video or an audio file in Filmora. After you import the file into a project you just have to add it to a certain position on the timeline. You can do this by simply dragging and dropping the file at the location on the timeline where you want the file to be placed. Click on the Add Track menu that is located in the upper left corner of the timeline and select the Big option from the Adjust Track Height submenu.

Enlarging the video and audio tracks will enable you to see the audio volume line that is displayed over all clips that contain sound you add to the timeline. Click on the line and drag it upwards if you would like to increase the volume or drag it downwards if you want to decrease the volume of an audio or a video file.

2. Applying the Fade In and Fade Out Effects to Change the Audio Volume Partially

Once you add an audio clip to an audio track on Filmora’s timeline, you can adjust its volume from the Audio Editing panel. Double-clicking on an audio file will bring up the Audio Editing panel that contains Fade In and Fade Out sliders. Both sliders are going to be set to zero by default, so you just have to drag each of them to the right in order to create the Fade In or Fade Out effect.

Filmora also lets you create the Fade In and Fade Out effect directly from the timeline, as you just have to hover the mouse over an audio file and drag the Fade In or Fade Out markers to set the duration of the effect for that particular file.

3. Using the Volume Slider to Change the Audio Volume

On the left side of the Audio Editing panel that can be accessed by double clicking on an audio file, you will be able to see the volume slider. Its value is going to be set to 0 dB by default and you just have to drag it upward or downward in order to adjust the audio volume. As you drag the slider the new audio volume value is going to be displayed in a box below the slider. The left/right balance value can be adjusted by dragging the knob that is located above the volume slider in either direction. Alternatively, you can insert a new numerical value in the box below the knob. If the displayed value is 0 dB, then the left and right channels are balanced, while the value of -100 dB means that all the sound goes through the left channel and if the displayed value is 100 dB all the sound will go through the right channel.

4. Adding Keyframes to Adjust the Audio Volume

Once you add an audio file to the timeline you can adjust its volume by adding keyframes to it. Place the playhead to the exact spot in the audio file where you want to add the first keyframe and then double click on the file to bring up the Audio Editing panel. Click on the Add Volume Keyframes icon and use the volume slider to adjust the volume at the position of the first keyframe.

Simply move the playhead and change the value on the volume slider to add new keyframes to the audio file. This method of adjusting audio volume enables you to set different volume values for different parts of an audio file.

Still not solved? Try this audio guide of Filmora to settle all the audio problems.

Conclusion

Having complete control over the volume of all audio files you use in your projects is important for so many different reasons. Filmora offers four easy ways to adjust the audio volume so you can focus on more important tasks. Which method of adjusting the audio volume in Filmora do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Some of the greatest film directors of all time have used sound to make the scenes in their movies more dramatic, romantic or to build suspense. The importance of sound for the overall quality of a video is often overlooked by young filmmakers, as they tend to dedicate all of their attention to the visual part of their projects.

The fact of the matter is that even a minor error in the video’s soundtrack can distract the viewer and ruin a video completely. That’s why, in this article, we are going to show you four different methods of adjusting the audio volume in Filmora.

To increse the volume of your video, click here.

Four Ways of Adjusting Audio Volume in Filmora

The audio clips often have different volume levels, so in order to create a balanced soundtrack, you have to adjust the volume of each audio track you intend to use in your projects. Filmora offers several different ways to adjust the volume of audio files quickly and effortlessly. Here’s how you can increase or decrease the volume of the audio clips in Filmora.

Download Filmora and watch the video below to get a full knowledge abtou adjusting volume!

1. Changing the Audio Volume of Entire Track

This is probably the easiest and fastest way to adjust the volume of a video or an audio file in Filmora. After you import the file into a project you just have to add it to a certain position on the timeline. You can do this by simply dragging and dropping the file at the location on the timeline where you want the file to be placed. Click on the Add Track menu that is located in the upper left corner of the timeline and select the Big option from the Adjust Track Height submenu.

Enlarging the video and audio tracks will enable you to see the audio volume line that is displayed over all clips that contain sound you add to the timeline. Click on the line and drag it upwards if you would like to increase the volume or drag it downwards if you want to decrease the volume of an audio or a video file.

2. Applying the Fade In and Fade Out Effects to Change the Audio Volume Partially

Once you add an audio clip to an audio track on Filmora’s timeline, you can adjust its volume from the Audio Editing panel. Double-clicking on an audio file will bring up the Audio Editing panel that contains Fade In and Fade Out sliders. Both sliders are going to be set to zero by default, so you just have to drag each of them to the right in order to create the Fade In or Fade Out effect.

Filmora also lets you create the Fade In and Fade Out effect directly from the timeline, as you just have to hover the mouse over an audio file and drag the Fade In or Fade Out markers to set the duration of the effect for that particular file.

3. Using the Volume Slider to Change the Audio Volume

On the left side of the Audio Editing panel that can be accessed by double clicking on an audio file, you will be able to see the volume slider. Its value is going to be set to 0 dB by default and you just have to drag it upward or downward in order to adjust the audio volume. As you drag the slider the new audio volume value is going to be displayed in a box below the slider. The left/right balance value can be adjusted by dragging the knob that is located above the volume slider in either direction. Alternatively, you can insert a new numerical value in the box below the knob. If the displayed value is 0 dB, then the left and right channels are balanced, while the value of -100 dB means that all the sound goes through the left channel and if the displayed value is 100 dB all the sound will go through the right channel.

4. Adding Keyframes to Adjust the Audio Volume

Once you add an audio file to the timeline you can adjust its volume by adding keyframes to it. Place the playhead to the exact spot in the audio file where you want to add the first keyframe and then double click on the file to bring up the Audio Editing panel. Click on the Add Volume Keyframes icon and use the volume slider to adjust the volume at the position of the first keyframe.

Simply move the playhead and change the value on the volume slider to add new keyframes to the audio file. This method of adjusting audio volume enables you to set different volume values for different parts of an audio file.

Still not solved? Try this audio guide of Filmora to settle all the audio problems.

Conclusion

Having complete control over the volume of all audio files you use in your projects is important for so many different reasons. Filmora offers four easy ways to adjust the audio volume so you can focus on more important tasks. Which method of adjusting the audio volume in Filmora do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Some of the greatest film directors of all time have used sound to make the scenes in their movies more dramatic, romantic or to build suspense. The importance of sound for the overall quality of a video is often overlooked by young filmmakers, as they tend to dedicate all of their attention to the visual part of their projects.

The fact of the matter is that even a minor error in the video’s soundtrack can distract the viewer and ruin a video completely. That’s why, in this article, we are going to show you four different methods of adjusting the audio volume in Filmora.

To increse the volume of your video, click here.

Four Ways of Adjusting Audio Volume in Filmora

The audio clips often have different volume levels, so in order to create a balanced soundtrack, you have to adjust the volume of each audio track you intend to use in your projects. Filmora offers several different ways to adjust the volume of audio files quickly and effortlessly. Here’s how you can increase or decrease the volume of the audio clips in Filmora.

Download Filmora and watch the video below to get a full knowledge abtou adjusting volume!

1. Changing the Audio Volume of Entire Track

This is probably the easiest and fastest way to adjust the volume of a video or an audio file in Filmora. After you import the file into a project you just have to add it to a certain position on the timeline. You can do this by simply dragging and dropping the file at the location on the timeline where you want the file to be placed. Click on the Add Track menu that is located in the upper left corner of the timeline and select the Big option from the Adjust Track Height submenu.

Enlarging the video and audio tracks will enable you to see the audio volume line that is displayed over all clips that contain sound you add to the timeline. Click on the line and drag it upwards if you would like to increase the volume or drag it downwards if you want to decrease the volume of an audio or a video file.

2. Applying the Fade In and Fade Out Effects to Change the Audio Volume Partially

Once you add an audio clip to an audio track on Filmora’s timeline, you can adjust its volume from the Audio Editing panel. Double-clicking on an audio file will bring up the Audio Editing panel that contains Fade In and Fade Out sliders. Both sliders are going to be set to zero by default, so you just have to drag each of them to the right in order to create the Fade In or Fade Out effect.

Filmora also lets you create the Fade In and Fade Out effect directly from the timeline, as you just have to hover the mouse over an audio file and drag the Fade In or Fade Out markers to set the duration of the effect for that particular file.

3. Using the Volume Slider to Change the Audio Volume

On the left side of the Audio Editing panel that can be accessed by double clicking on an audio file, you will be able to see the volume slider. Its value is going to be set to 0 dB by default and you just have to drag it upward or downward in order to adjust the audio volume. As you drag the slider the new audio volume value is going to be displayed in a box below the slider. The left/right balance value can be adjusted by dragging the knob that is located above the volume slider in either direction. Alternatively, you can insert a new numerical value in the box below the knob. If the displayed value is 0 dB, then the left and right channels are balanced, while the value of -100 dB means that all the sound goes through the left channel and if the displayed value is 100 dB all the sound will go through the right channel.

4. Adding Keyframes to Adjust the Audio Volume

Once you add an audio file to the timeline you can adjust its volume by adding keyframes to it. Place the playhead to the exact spot in the audio file where you want to add the first keyframe and then double click on the file to bring up the Audio Editing panel. Click on the Add Volume Keyframes icon and use the volume slider to adjust the volume at the position of the first keyframe.

Simply move the playhead and change the value on the volume slider to add new keyframes to the audio file. This method of adjusting audio volume enables you to set different volume values for different parts of an audio file.

Still not solved? Try this audio guide of Filmora to settle all the audio problems.

Conclusion

Having complete control over the volume of all audio files you use in your projects is important for so many different reasons. Filmora offers four easy ways to adjust the audio volume so you can focus on more important tasks. Which method of adjusting the audio volume in Filmora do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: