How to Remove Hiss From Audio: Tips and Tricks

Creating content can be fun most of the time. The shoot is perfect and the scenes are spotless. You are confident that you got everything right. But then, when you listen to the recording, you notice a continuous hissing sound. This takes you back as you have to decide to remove hiss from audio before editing the video. Luckily, several hiss removal approaches will work just fine. In this article, we take you through the audio cleanup process to help you with your hiss reduction efforts.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Step-by-Step to Free Digital Sound Logging: The Audacity Way

Natural audio recording software, such as Voice Memos for Macs or Sound Recorder for Windows PCs, is included with every machine. These applications enable users to record audio using either the desktop’s internal or an external microphone, and they generally have basic audio editing features.

However, when you’re looking for a higher-quality recording program, Audacity is the way to go. Audacity is a free audio editor with a lot of cutting-edge features. More significantly, recording using Audacity is as simple as clicking a button.

In this Audacity Record Computer Audio guide, we will show you all the methods of recording internal audio on your computer and Mac.

In this article

01 Record Audio On Audacity with a Microphone

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

Top 6 Real-Time Voice Modifiers: Unveiling the Best Tools

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Try It Free >>

We get overwhelmed with routine tasks we have to perform in our daily lives and forget how important it is to laugh. A prank call can be a great way to remind your friends and family that life without humor is empty.

Fortunately, all you need is a good prank call idea and an app that enables you to modulate your voice during the call. However, finding a voice changer app that can alter voices in real time can be daunting. That is why in this article we are going to take you through some of the best real time voice changer apps you can find on Google Play and App Store.

Best Real-Time Voice Changer Apps for iPhone and Android

Before you decide to start recording your calls or pull pranks over the phone, you must first make sure that doing that is in accordance with the law. So, here are some apps for iPhone and Android devices that will let you do that. If you can’t get in trouble for prank calling, you should find the voice changer app that enables you to get creative with your jokes.

Change Audio in Filmora Editor with Fun

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free >>

1. Live Voice Changer – Prankcall

Price: Free, but offers in-app purchases

**Compatibility:**iOS

The modern and intuitive design makes the voice changer an attractive option for all iPhone users in need of an app that allows them to modulate their voices freely. In addition to 11 voice effects that enable you to sound like the opposite gender or even Dart Vader, this app also features a 12-band equalizer that lets you fine-tune each effect you apply to your voice. However, if you want to gain access to the app’s live voice changing features, you have to make an in-app purchase. Moreover, the free version of the app doesn’t include any of the voice recording options you can use if you purchase the full version of Live Voice Changer – Prankcall.

2. Voicemod – Voice Changer & FX

**Price:**Free

**Compatibility:**iOS

It is a lot of fun to sound like somebody else during your gaming sessions. Voicemod – Voice Changer & FX lets you choose from more than forty different voices that can be applied in real time. In addition to modulating voices, this app can also be used to add face filters during video calls, which can make conversations you’re having with your friends much more entertaining. All videos you capture with Voicemod – Voice Changer & FX can be shared on social media directly from the app, but keep in mind that you won’t be able to edit any of the audio and video effects this app offers.

3. Funcall – Voice Changer & Rec

**Price:**Free, but offers in-app purchases

Compatibility:iOS , Android

If you are searching for an app that enables you to make international calls to landlines and cellphones, then Funcall – Voice Changer& Rec is the right choice for you. You can make calls to more than 150 countries around the globe at low prices, enabling you to keep in touch with your friends wherever they are. Furthermore, this cross-platform app lets you choose from real time voice effects like Helium balloon, Woman or Man sound. Each call you make with Funcall can be recorded and downloaded to your device so that you can listen to it or share it with your friends on social media.

4. Another Voice Changer (° O °)

**Price:**Free

**Compatibility:**iOS

Voice messages seem to be out of fashion. Another Voice Changer can help you create voice messages that are fun to listen to. Voice effects like Baby, Ghost, Party Time or Sleepyhead are just a few among numerous options you will have at your disposal if you choose to install this app on your iPhone or iPad. What’s more, you can also create voice memes with Another Voice Changer or browse through the most popular voice messages community members share on this platform. The lack of audio editing options is the only true downside this app has.

5. Call Voice Changer – IntCall

**Price:**Free, but offers in-app purchases

**Compatibility:**iOS

Making the conversations, you have with your friends more entertaining won’t be too difficult if you choose to install this app. Call Voice Changer – IntCall lets you alter your voice while the call is in progress and even change the effect in real time. Besides modulating your voice, you can also use sound effects that include greetings in different languages or birthday songs throughout the call. Even though all new users of Call Voice Changer - IntCall get some free minutes, you will have to pay for each minute of the calls you make with this app. The monthly subscription to this app is not available in all regions of the world, so choosing the pay as you go option is a better solution.

6. MagicCall – Voice Changer App

**Price:**Free, but offers in-app purchases

Compatibility:iOS , Android

Have you ever wondered how your voice would sound if you were a kid? With MagicaCall –Voice Changer App, you easily find out since the app lets you modulate your voice or switch between different voice options during a call. Moreover, you can test how your voice will sound before you make the call so that you can plan your prank perfectly. You can also play sound emoticons like a kiss or a clap while the call is in progress to create a comical effect. There are several subscription options available, and you must select one if you want to have access to all of the app’s features.

How to modulate a voice during a call?

You will have to take the exact steps to modulate your voice during a call depending on the voice changer application you installed on your device. Most of these applications offer preset voices you can apply with a single tap and let you switch between effects so your representative can sound differently during the same conversation.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free

Try It Free >>

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Try It Free >>

We get overwhelmed with routine tasks we have to perform in our daily lives and forget how important it is to laugh. A prank call can be a great way to remind your friends and family that life without humor is empty.

Fortunately, all you need is a good prank call idea and an app that enables you to modulate your voice during the call. However, finding a voice changer app that can alter voices in real time can be daunting. That is why in this article we are going to take you through some of the best real time voice changer apps you can find on Google Play and App Store.

Best Real-Time Voice Changer Apps for iPhone and Android

Before you decide to start recording your calls or pull pranks over the phone, you must first make sure that doing that is in accordance with the law. So, here are some apps for iPhone and Android devices that will let you do that. If you can’t get in trouble for prank calling, you should find the voice changer app that enables you to get creative with your jokes.

Change Audio in Filmora Editor with Fun

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free >>

1. Live Voice Changer – Prankcall

Price: Free, but offers in-app purchases

**Compatibility:**iOS

The modern and intuitive design makes the voice changer an attractive option for all iPhone users in need of an app that allows them to modulate their voices freely. In addition to 11 voice effects that enable you to sound like the opposite gender or even Dart Vader, this app also features a 12-band equalizer that lets you fine-tune each effect you apply to your voice. However, if you want to gain access to the app’s live voice changing features, you have to make an in-app purchase. Moreover, the free version of the app doesn’t include any of the voice recording options you can use if you purchase the full version of Live Voice Changer – Prankcall.

2. Voicemod – Voice Changer & FX

**Price:**Free

**Compatibility:**iOS

It is a lot of fun to sound like somebody else during your gaming sessions. Voicemod – Voice Changer & FX lets you choose from more than forty different voices that can be applied in real time. In addition to modulating voices, this app can also be used to add face filters during video calls, which can make conversations you’re having with your friends much more entertaining. All videos you capture with Voicemod – Voice Changer & FX can be shared on social media directly from the app, but keep in mind that you won’t be able to edit any of the audio and video effects this app offers.

3. Funcall – Voice Changer & Rec

**Price:**Free, but offers in-app purchases

Compatibility:iOS , Android

If you are searching for an app that enables you to make international calls to landlines and cellphones, then Funcall – Voice Changer& Rec is the right choice for you. You can make calls to more than 150 countries around the globe at low prices, enabling you to keep in touch with your friends wherever they are. Furthermore, this cross-platform app lets you choose from real time voice effects like Helium balloon, Woman or Man sound. Each call you make with Funcall can be recorded and downloaded to your device so that you can listen to it or share it with your friends on social media.

4. Another Voice Changer (° O °)

**Price:**Free

**Compatibility:**iOS

Voice messages seem to be out of fashion. Another Voice Changer can help you create voice messages that are fun to listen to. Voice effects like Baby, Ghost, Party Time or Sleepyhead are just a few among numerous options you will have at your disposal if you choose to install this app on your iPhone or iPad. What’s more, you can also create voice memes with Another Voice Changer or browse through the most popular voice messages community members share on this platform. The lack of audio editing options is the only true downside this app has.

5. Call Voice Changer – IntCall

**Price:**Free, but offers in-app purchases

**Compatibility:**iOS

Making the conversations, you have with your friends more entertaining won’t be too difficult if you choose to install this app. Call Voice Changer – IntCall lets you alter your voice while the call is in progress and even change the effect in real time. Besides modulating your voice, you can also use sound effects that include greetings in different languages or birthday songs throughout the call. Even though all new users of Call Voice Changer - IntCall get some free minutes, you will have to pay for each minute of the calls you make with this app. The monthly subscription to this app is not available in all regions of the world, so choosing the pay as you go option is a better solution.

6. MagicCall – Voice Changer App

**Price:**Free, but offers in-app purchases

Compatibility:iOS , Android

Have you ever wondered how your voice would sound if you were a kid? With MagicaCall –Voice Changer App, you easily find out since the app lets you modulate your voice or switch between different voice options during a call. Moreover, you can test how your voice will sound before you make the call so that you can plan your prank perfectly. You can also play sound emoticons like a kiss or a clap while the call is in progress to create a comical effect. There are several subscription options available, and you must select one if you want to have access to all of the app’s features.

How to modulate a voice during a call?

You will have to take the exact steps to modulate your voice during a call depending on the voice changer application you installed on your device. Most of these applications offer preset voices you can apply with a single tap and let you switch between effects so your representative can sound differently during the same conversation.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free

Try It Free >>

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Try It Free >>

We get overwhelmed with routine tasks we have to perform in our daily lives and forget how important it is to laugh. A prank call can be a great way to remind your friends and family that life without humor is empty.

Fortunately, all you need is a good prank call idea and an app that enables you to modulate your voice during the call. However, finding a voice changer app that can alter voices in real time can be daunting. That is why in this article we are going to take you through some of the best real time voice changer apps you can find on Google Play and App Store.

Best Real-Time Voice Changer Apps for iPhone and Android

Before you decide to start recording your calls or pull pranks over the phone, you must first make sure that doing that is in accordance with the law. So, here are some apps for iPhone and Android devices that will let you do that. If you can’t get in trouble for prank calling, you should find the voice changer app that enables you to get creative with your jokes.

Change Audio in Filmora Editor with Fun

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free >>

1. Live Voice Changer – Prankcall

Price: Free, but offers in-app purchases

**Compatibility:**iOS

The modern and intuitive design makes the voice changer an attractive option for all iPhone users in need of an app that allows them to modulate their voices freely. In addition to 11 voice effects that enable you to sound like the opposite gender or even Dart Vader, this app also features a 12-band equalizer that lets you fine-tune each effect you apply to your voice. However, if you want to gain access to the app’s live voice changing features, you have to make an in-app purchase. Moreover, the free version of the app doesn’t include any of the voice recording options you can use if you purchase the full version of Live Voice Changer – Prankcall.

2. Voicemod – Voice Changer & FX

**Price:**Free

**Compatibility:**iOS

It is a lot of fun to sound like somebody else during your gaming sessions. Voicemod – Voice Changer & FX lets you choose from more than forty different voices that can be applied in real time. In addition to modulating voices, this app can also be used to add face filters during video calls, which can make conversations you’re having with your friends much more entertaining. All videos you capture with Voicemod – Voice Changer & FX can be shared on social media directly from the app, but keep in mind that you won’t be able to edit any of the audio and video effects this app offers.

3. Funcall – Voice Changer & Rec

**Price:**Free, but offers in-app purchases

Compatibility:iOS , Android

If you are searching for an app that enables you to make international calls to landlines and cellphones, then Funcall – Voice Changer& Rec is the right choice for you. You can make calls to more than 150 countries around the globe at low prices, enabling you to keep in touch with your friends wherever they are. Furthermore, this cross-platform app lets you choose from real time voice effects like Helium balloon, Woman or Man sound. Each call you make with Funcall can be recorded and downloaded to your device so that you can listen to it or share it with your friends on social media.

4. Another Voice Changer (° O °)

**Price:**Free

**Compatibility:**iOS

Voice messages seem to be out of fashion. Another Voice Changer can help you create voice messages that are fun to listen to. Voice effects like Baby, Ghost, Party Time or Sleepyhead are just a few among numerous options you will have at your disposal if you choose to install this app on your iPhone or iPad. What’s more, you can also create voice memes with Another Voice Changer or browse through the most popular voice messages community members share on this platform. The lack of audio editing options is the only true downside this app has.

5. Call Voice Changer – IntCall

**Price:**Free, but offers in-app purchases

**Compatibility:**iOS

Making the conversations, you have with your friends more entertaining won’t be too difficult if you choose to install this app. Call Voice Changer – IntCall lets you alter your voice while the call is in progress and even change the effect in real time. Besides modulating your voice, you can also use sound effects that include greetings in different languages or birthday songs throughout the call. Even though all new users of Call Voice Changer - IntCall get some free minutes, you will have to pay for each minute of the calls you make with this app. The monthly subscription to this app is not available in all regions of the world, so choosing the pay as you go option is a better solution.

6. MagicCall – Voice Changer App

**Price:**Free, but offers in-app purchases

Compatibility:iOS , Android

Have you ever wondered how your voice would sound if you were a kid? With MagicaCall –Voice Changer App, you easily find out since the app lets you modulate your voice or switch between different voice options during a call. Moreover, you can test how your voice will sound before you make the call so that you can plan your prank perfectly. You can also play sound emoticons like a kiss or a clap while the call is in progress to create a comical effect. There are several subscription options available, and you must select one if you want to have access to all of the app’s features.

How to modulate a voice during a call?

You will have to take the exact steps to modulate your voice during a call depending on the voice changer application you installed on your device. Most of these applications offer preset voices you can apply with a single tap and let you switch between effects so your representative can sound differently during the same conversation.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free

Try It Free >>

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Try It Free >>

We get overwhelmed with routine tasks we have to perform in our daily lives and forget how important it is to laugh. A prank call can be a great way to remind your friends and family that life without humor is empty.

Fortunately, all you need is a good prank call idea and an app that enables you to modulate your voice during the call. However, finding a voice changer app that can alter voices in real time can be daunting. That is why in this article we are going to take you through some of the best real time voice changer apps you can find on Google Play and App Store.

Best Real-Time Voice Changer Apps for iPhone and Android

Before you decide to start recording your calls or pull pranks over the phone, you must first make sure that doing that is in accordance with the law. So, here are some apps for iPhone and Android devices that will let you do that. If you can’t get in trouble for prank calling, you should find the voice changer app that enables you to get creative with your jokes.

Change Audio in Filmora Editor with Fun

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free >>

1. Live Voice Changer – Prankcall

Price: Free, but offers in-app purchases

**Compatibility:**iOS

The modern and intuitive design makes the voice changer an attractive option for all iPhone users in need of an app that allows them to modulate their voices freely. In addition to 11 voice effects that enable you to sound like the opposite gender or even Dart Vader, this app also features a 12-band equalizer that lets you fine-tune each effect you apply to your voice. However, if you want to gain access to the app’s live voice changing features, you have to make an in-app purchase. Moreover, the free version of the app doesn’t include any of the voice recording options you can use if you purchase the full version of Live Voice Changer – Prankcall.

2. Voicemod – Voice Changer & FX

**Price:**Free

**Compatibility:**iOS

It is a lot of fun to sound like somebody else during your gaming sessions. Voicemod – Voice Changer & FX lets you choose from more than forty different voices that can be applied in real time. In addition to modulating voices, this app can also be used to add face filters during video calls, which can make conversations you’re having with your friends much more entertaining. All videos you capture with Voicemod – Voice Changer & FX can be shared on social media directly from the app, but keep in mind that you won’t be able to edit any of the audio and video effects this app offers.

3. Funcall – Voice Changer & Rec

**Price:**Free, but offers in-app purchases

Compatibility:iOS , Android

If you are searching for an app that enables you to make international calls to landlines and cellphones, then Funcall – Voice Changer& Rec is the right choice for you. You can make calls to more than 150 countries around the globe at low prices, enabling you to keep in touch with your friends wherever they are. Furthermore, this cross-platform app lets you choose from real time voice effects like Helium balloon, Woman or Man sound. Each call you make with Funcall can be recorded and downloaded to your device so that you can listen to it or share it with your friends on social media.

4. Another Voice Changer (° O °)

**Price:**Free

**Compatibility:**iOS

Voice messages seem to be out of fashion. Another Voice Changer can help you create voice messages that are fun to listen to. Voice effects like Baby, Ghost, Party Time or Sleepyhead are just a few among numerous options you will have at your disposal if you choose to install this app on your iPhone or iPad. What’s more, you can also create voice memes with Another Voice Changer or browse through the most popular voice messages community members share on this platform. The lack of audio editing options is the only true downside this app has.

5. Call Voice Changer – IntCall

**Price:**Free, but offers in-app purchases

**Compatibility:**iOS

Making the conversations, you have with your friends more entertaining won’t be too difficult if you choose to install this app. Call Voice Changer – IntCall lets you alter your voice while the call is in progress and even change the effect in real time. Besides modulating your voice, you can also use sound effects that include greetings in different languages or birthday songs throughout the call. Even though all new users of Call Voice Changer - IntCall get some free minutes, you will have to pay for each minute of the calls you make with this app. The monthly subscription to this app is not available in all regions of the world, so choosing the pay as you go option is a better solution.

6. MagicCall – Voice Changer App

**Price:**Free, but offers in-app purchases

Compatibility:iOS , Android

Have you ever wondered how your voice would sound if you were a kid? With MagicaCall –Voice Changer App, you easily find out since the app lets you modulate your voice or switch between different voice options during a call. Moreover, you can test how your voice will sound before you make the call so that you can plan your prank perfectly. You can also play sound emoticons like a kiss or a clap while the call is in progress to create a comical effect. There are several subscription options available, and you must select one if you want to have access to all of the app’s features.

How to modulate a voice during a call?

You will have to take the exact steps to modulate your voice during a call depending on the voice changer application you installed on your device. Most of these applications offer preset voices you can apply with a single tap and let you switch between effects so your representative can sound differently during the same conversation.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free

Try It Free >>

Also read: