“5 Premium No-Cost Decibel Regulators for MP3 Files”

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Advanced Audio Technology for High-Fidelity Video Broadcasting

As the popularity of streaming services like YouTube and Twitch Gaming continues to grow, so does the need for high-quality audio in streams. If you want more viewers and followers, you have to make sure your content sounds great. To do this, you have to invest in good streaming mixers.

An audio mixer will help you adjust the levels of your different audio sources and add effects like reverb and delay. This can result in a world of difference in how your live stream sounds.

To help you find the best audio mixer for streaming, we’ve put together a list of the six best options on the market. So read on to find the perfect audio mixer for adding icing on the cake for your streams!

1. Pyle Professional Audio Mixer Sound Board Console
2. Mackie Mix8 8-Channel Compact Mixer
3. TC-Helicon GO XLR Broadcast Production Studio Mixer
4. YAMAHA MG06X 6-Input Compact Stereo Mixer
5. YOUSHARES Portable Digital Audio Mixer
6. Soundcraft EPM12 High-Performance 12-Channel Audio Mixer

• Bonus Tips: How To Record Your Live Stream Easily And Quickly?

Why Do You Need An Audio Mixer For Streaming?

If you’ve ever wondered why some people’s audio sounds so much better than others when streaming, it’s likely because they’re using an audio mixer.

An audio mixer is a console that takes multiple audio signals and combines them into one signal. This allows you to control the individual levels of each sound, as well as add special effects like EQ and reverb.

While you don’t necessarily need an audio mixer to stream, it can certainly make your life easier. So, if you’re planning on doing any sort of professional streaming, this device is a must-have. However, they can be expensive, complicated to use, and sometimes add latency to your live audio.

6 best Audio Mixer for Streaming

1.Pyle Professional Audio Mixer Sound Board Console

A Cost-Effective Audio Mixer

Product details

Price	$90.52 (With a discount)
Compatibility	External USB, Computer PC, Flash drive, Bluetooth device
Item Dimensions LxWxH	2.26 x 9.69 x 9.26 inches
Number of Channels	6
Connectivity Technology	Interface, XLR, USB, Bluetooth
Mic & Stereo line inputs	XLR, unbalanced 1/4” Plug with plus 48V Phantom button
Power supply	100V-240V (plus/minus 15V DC power adapter)

Introduction

Looking for a professional audio mixer that can take the sound in your streams to the next level? You need the Pyle Professional Audio Mixer Sound Board Console.

The console has 6 channels to mix multiple audio sources at once and also comes with an ultra-musical 3-band EQ for each channel so you can fine-tune the sound.

This audio mixer features that will help you create the perfect sound, such as support for XLR and an unbalanced 1/4” Plug with a +48V Phantom button, Bluetooth connectivity, ED Peak Level Indicator, and extra low noise. The downside, however, is the lack of customization options for streaming music.

Pros

• Has an audio interface and a USB sound card
• Easy-to-use functionalities
• Compatible with universal digital files
• high headroom mixer
• Rugged steel chassis

Cons

• Only basic music streaming capabilities

2.Mackie Mix8 8-Channel Compact Mixer

Best Artistic Audio Mixer

Product details

Price	$99.99
Compatibility	1 mic/line input
Item Dimensions LxWxH	9.6 x 7.8 x 2.1 inches
Number of Channels	8 Channels
Connectivity Technology	Auxiliary
Mic & Stereo line inputs	Dual Mic/Line Inputs with studio-level audio quality and 2 stereos 1/4” line inputs
Power supply	100-240V

Introduction

Mackie Mix8 8-Channel Compact Mixer is designed for podcasters, YouTubers, and other content creators who need a high-quality mixer in a small form factor.

Despite its small size, Mackie Mix8 gives a high-quality sound and is durable. The mixer has 8 channels - each with its level control, a 3-band EQ on all channels, phantom power for studio condenser mic, and 2 1/4” line input.

When it comes to design, this livestream sound mixer has a rugged, durable, and reliable structure. Moreover, it is compact in size and offers high portability.

Although this mixer is perfect for home studios or small venues, you won’t find enough channels to tune your music for large events.

Pros

• Supports 2 microphones at a time
• Affordable and easy to set up
• Compact design
• Mono and stereo inputs
  li>Headphone output having a separate volume control

Cons

• Not suitable as a primary mixer

3. TC-Helicon GO XLR Broadcast Production Studio Mixer

Super-fast USB Audio Mixer For Streaming

Product details

Price	$399.00 (after discount)
Compatibility	Windows 7, 8, and 10
Item Dimensions LxWxH	6.5 x 11 x 2.75 inches
Number of Channels	4-channels
Connectivity Technology	USB
Mic & Stereo line inputs	Mic Preamps: 1 x XLR, 1 x 1/8” TRS.
Power supply	12V DC

Introduction

The TC-Helicon GO XLR is an excellent audio mixer for streaming that gives you all the controls you need to create professional podcasts or videos.

The mixer has four channel mixers that let you control the audio sources in real-time, 48V phantom power for XLR mic, and a MIDAS preamp that lets you create a polished, professional sound.

With its vocal effects, including Morph, Reverb, Robot, Pitch Shift, HardTune, Megaphone, and Echo, you can fine-tune your music and engage your audiences like never before.

From its tons of customization options to RGB lighting and instant mute option to numerous audio effects, this audio mixer has everything a gamer or streamer needs. Like any other high-end sound mixer, TC-Helicon GO XLR is not cheap and comes with a huge price tag of $399 (after a 27% discount).

Pros

• Comes with customizable motorized faders
• Supports optical input for PlayStation/Xbox
• Built-in vocal effects and audio effects
• Instant mute button
• Easy to use and set up

Cons

• Not affordable for some users
• Only compatible with Windows operating system

4. YAMAHA MG06X 6-Input Compact Stereo Mixer

Best Lightweight Audio Mixer For Live Streaming

Product details

Price	US$143.20
Compatibility	PC
Item Dimensions LxWxH	10.63 x 9.53 x 4.69 inches
Number of Channels	6
Connectivity Technology	USB
Mic & Stereo line inputs	Max. 2 Mic / 6 Line Inputs (2 mono + 2 stereos)
Power supply	100-240V

Introduction

The Yamaha MG06X 6-Input Compact Stereo is a compact mixer that packs a lot of punch. With its onboard processors with 24 SPX digital effects, 48V phantom power, EQ, and High-pass Filters, the MG06X can easily handle live performances, recording sessions, and more.

And thanks to its intuitive interface, and compact and flexible design, the Yamaha MG06X is easy to take with you wherever you go. The mixer also features two mono XLR/TRS combo inputs with studio-quality preamps, two stereo line inputs, and a high-quality sound Op-amp.

Yamaha MG06X’s 1 Knob compressors make it easy to get punchy bass lines, a tighter snare, lively guitars, and a cleaner vocal sound. This top-of-the-line audio mixer provides peak performance and unrivaled sound quality, making it perfect for small-to-medium-sized venues. However, its input system is very slow and takes time to start audio.

Pros

• Delivers clean and natural sound
• 2 band EQ on all mono channels
• Durable and flexible design
• TRS and XLR 10 1/4 stereo output
• XLR 2 mono mic/line input and 2 1/4 stereo input
• BMS10A microphone stand adapter (optional)

Cons

• Customer service is not good

5.YOUSHARES Portable Digital Audio Mixer

Best Budget-Friendly Audio Mixer

Product details

Price	$69.99
Compatibility	Bluetooth, Laptop, Smartphones, and Tablets
Item Dimensions LxWxH	10.87 x 10.28 x 3.23 inches
Number of Channels	6
Connectivity Technology	Interface, Xlr, USB, Bluetooth
Mic & Stereo line inputs	4 XLR/TRS combined mono mic/line input jacks and 2 TRS & 2 RCA stereo input jacks
Power supply	DC 5V low voltage power supply

Introduction

The YOUSHARES Portable Digital Audio Mixer is a great tool for mixing multiple audio signals. This six-channel mixer has four XLR/TRS combined mono mic/line input jacks and two TRS & two RCA stereo input jacks, making it perfect for a variety of applications.

YOUSHARES audio mixer also has 24 DSP multipurpose effects, high and low sound adjustment, 48V phantom power, and is compatible with Bluetooth, smartphones, tablets, and laptops. This makes it perfect for daily use or on most occasions.

The mixer’s compact and durable design makes it highly portable, but it is not suitable for large events.

Pros

• Easy to Adjust
• The 4-channel mixing console and monitor paths
• Low-noise 4-channel audio mixer
• Built-in 48V phantom power
• high-definition headset output port
• 24 DSP multipurpose effects

Cons

• Not many channels for large events

6. Soundcraft EPM12 High-Performance 12-Channel Audio Mixer

High-end Audio Mixer For Live Streaming

Product details

Price	$439.00
Compatibility	Computer
Item Dimensions LxWxH	14.25 x 17 x 3.56 inches
Number of Channels	12+2
Connectivity Technology	Auxiliary
Mic & Stereo line inputs	XLR inputs and 2-band EQ on stereo inputs
Power supply	230 Volts

Introduction

The EPM12 is a high-performance 12-channel audio mixer with 2 configurable auxiliary buses, XLR-type, and 1/4-inches metal jack connector sockets.

The EPM12 has a stereo headphone output (stereo RCA) and an independent record output for monitoring. The input channels also have 3-band EQs with a swept mid control on mono inputs and +48V phantom power.

The EPM12 is designed to be compact, easy to use, and has an easy-to-read LCD display that can handle various tasks at once. One downside, however, is that this audio mixer is highly expensive and can cost you up to $439.00.

Pros

• 14 different channels
• 2 auxiliary buses
• 3-band EQ and +48V phantom power
• Precision GB30 mic preamps

Cons

• Extremely expensive

Bonus Tips: How To Record Your Live Stream Easily And Quickly?

Recording your live stream can be a great way to create content for your gaming channel or vlog. But it can also be a pain to set up and manage if you’re not familiar with the process.

Luckily, there are many user-friendly screen recorder programs available. Still, we recommend using Wondershare Filmora - a great option for gamers and vloggers, as it’s easy to use and comes with all the advanced features you need to record and edit your live stream.

Conclusion

In this article, we’ve provided a detailed review of the 6 best audio mixers for streaming live content on different platforms.

After testing and researching the six different audio mixers, we have concluded that the YOUSHARES Portable Digital Audio Mixer is the best audio console for streaming. This mixer is an affordable option that provides good sound quality and is easy to use. The Soundcraft EPM12 High-Performance 12-Channel Audio Mixer is a great choice for those who want a higher-end option.

We’ve also discussed a bonus tip for using Filmora to record your live streams and keep it for later sharing or any other purpose. Hopefully, you find this comprehensive review helpful and can now make the right buying decision.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Why Do You Need An Audio Mixer For Streaming?

If you’ve ever wondered why some people’s audio sounds so much better than others when streaming, it’s likely because they’re using an audio mixer.

An audio mixer is a console that takes multiple audio signals and combines them into one signal. This allows you to control the individual levels of each sound, as well as add special effects like EQ and reverb.

While you don’t necessarily need an audio mixer to stream, it can certainly make your life easier. So, if you’re planning on doing any sort of professional streaming, this device is a must-have. However, they can be expensive, complicated to use, and sometimes add latency to your live audio.

6 best Audio Mixer for Streaming

1.Pyle Professional Audio Mixer Sound Board Console

A Cost-Effective Audio Mixer

Product details

Price	$90.52 (With a discount)
Compatibility	External USB, Computer PC, Flash drive, Bluetooth device
Item Dimensions LxWxH	2.26 x 9.69 x 9.26 inches
Number of Channels	6
Connectivity Technology	Interface, XLR, USB, Bluetooth
Mic & Stereo line inputs	XLR, unbalanced 1/4” Plug with plus 48V Phantom button
Power supply	100V-240V (plus/minus 15V DC power adapter)

Introduction

Looking for a professional audio mixer that can take the sound in your streams to the next level? You need the Pyle Professional Audio Mixer Sound Board Console.

The console has 6 channels to mix multiple audio sources at once and also comes with an ultra-musical 3-band EQ for each channel so you can fine-tune the sound.

This audio mixer features that will help you create the perfect sound, such as support for XLR and an unbalanced 1/4” Plug with a +48V Phantom button, Bluetooth connectivity, ED Peak Level Indicator, and extra low noise. The downside, however, is the lack of customization options for streaming music.

Pros

• Has an audio interface and a USB sound card
• Easy-to-use functionalities
• Compatible with universal digital files
• high headroom mixer
• Rugged steel chassis

Cons

• Only basic music streaming capabilities

2.Mackie Mix8 8-Channel Compact Mixer

Best Artistic Audio Mixer

Product details

Price	$99.99
Compatibility	1 mic/line input
Item Dimensions LxWxH	9.6 x 7.8 x 2.1 inches
Number of Channels	8 Channels
Connectivity Technology	Auxiliary
Mic & Stereo line inputs	Dual Mic/Line Inputs with studio-level audio quality and 2 stereos 1/4” line inputs
Power supply	100-240V

Introduction

Mackie Mix8 8-Channel Compact Mixer is designed for podcasters, YouTubers, and other content creators who need a high-quality mixer in a small form factor.

Despite its small size, Mackie Mix8 gives a high-quality sound and is durable. The mixer has 8 channels - each with its level control, a 3-band EQ on all channels, phantom power for studio condenser mic, and 2 1/4” line input.

When it comes to design, this livestream sound mixer has a rugged, durable, and reliable structure. Moreover, it is compact in size and offers high portability.

Although this mixer is perfect for home studios or small venues, you won’t find enough channels to tune your music for large events.

Pros

• Supports 2 microphones at a time
• Affordable and easy to set up
• Compact design
• Mono and stereo inputs
  li>Headphone output having a separate volume control

Cons

• Not suitable as a primary mixer

3. TC-Helicon GO XLR Broadcast Production Studio Mixer

Super-fast USB Audio Mixer For Streaming

Product details

Price	$399.00 (after discount)
Compatibility	Windows 7, 8, and 10
Item Dimensions LxWxH	6.5 x 11 x 2.75 inches
Number of Channels	4-channels
Connectivity Technology	USB
Mic & Stereo line inputs	Mic Preamps: 1 x XLR, 1 x 1/8” TRS.
Power supply	12V DC

Introduction

The TC-Helicon GO XLR is an excellent audio mixer for streaming that gives you all the controls you need to create professional podcasts or videos.

The mixer has four channel mixers that let you control the audio sources in real-time, 48V phantom power for XLR mic, and a MIDAS preamp that lets you create a polished, professional sound.

With its vocal effects, including Morph, Reverb, Robot, Pitch Shift, HardTune, Megaphone, and Echo, you can fine-tune your music and engage your audiences like never before.

From its tons of customization options to RGB lighting and instant mute option to numerous audio effects, this audio mixer has everything a gamer or streamer needs. Like any other high-end sound mixer, TC-Helicon GO XLR is not cheap and comes with a huge price tag of $399 (after a 27% discount).

Pros

• Comes with customizable motorized faders
• Supports optical input for PlayStation/Xbox
• Built-in vocal effects and audio effects
• Instant mute button
• Easy to use and set up

Cons

• Not affordable for some users
• Only compatible with Windows operating system

4. YAMAHA MG06X 6-Input Compact Stereo Mixer

Best Lightweight Audio Mixer For Live Streaming

Product details

Price	US$143.20
Compatibility	PC
Item Dimensions LxWxH	10.63 x 9.53 x 4.69 inches
Number of Channels	6
Connectivity Technology	USB
Mic & Stereo line inputs	Max. 2 Mic / 6 Line Inputs (2 mono + 2 stereos)
Power supply	100-240V

Introduction

The Yamaha MG06X 6-Input Compact Stereo is a compact mixer that packs a lot of punch. With its onboard processors with 24 SPX digital effects, 48V phantom power, EQ, and High-pass Filters, the MG06X can easily handle live performances, recording sessions, and more.

And thanks to its intuitive interface, and compact and flexible design, the Yamaha MG06X is easy to take with you wherever you go. The mixer also features two mono XLR/TRS combo inputs with studio-quality preamps, two stereo line inputs, and a high-quality sound Op-amp.

Yamaha MG06X’s 1 Knob compressors make it easy to get punchy bass lines, a tighter snare, lively guitars, and a cleaner vocal sound. This top-of-the-line audio mixer provides peak performance and unrivaled sound quality, making it perfect for small-to-medium-sized venues. However, its input system is very slow and takes time to start audio.

Pros

• Delivers clean and natural sound
• 2 band EQ on all mono channels
• Durable and flexible design
• TRS and XLR 10 1/4 stereo output
• XLR 2 mono mic/line input and 2 1/4 stereo input
• BMS10A microphone stand adapter (optional)

Cons

• Customer service is not good

5.YOUSHARES Portable Digital Audio Mixer

Best Budget-Friendly Audio Mixer

Product details

Price	$69.99
Compatibility	Bluetooth, Laptop, Smartphones, and Tablets
Item Dimensions LxWxH	10.87 x 10.28 x 3.23 inches
Number of Channels	6
Connectivity Technology	Interface, Xlr, USB, Bluetooth
Mic & Stereo line inputs	4 XLR/TRS combined mono mic/line input jacks and 2 TRS & 2 RCA stereo input jacks
Power supply	DC 5V low voltage power supply

Introduction

The YOUSHARES Portable Digital Audio Mixer is a great tool for mixing multiple audio signals. This six-channel mixer has four XLR/TRS combined mono mic/line input jacks and two TRS & two RCA stereo input jacks, making it perfect for a variety of applications.

YOUSHARES audio mixer also has 24 DSP multipurpose effects, high and low sound adjustment, 48V phantom power, and is compatible with Bluetooth, smartphones, tablets, and laptops. This makes it perfect for daily use or on most occasions.

The mixer’s compact and durable design makes it highly portable, but it is not suitable for large events.

Pros

• Easy to Adjust
• The 4-channel mixing console and monitor paths
• Low-noise 4-channel audio mixer
• Built-in 48V phantom power
• high-definition headset output port
• 24 DSP multipurpose effects

Cons

• Not many channels for large events

6. Soundcraft EPM12 High-Performance 12-Channel Audio Mixer

High-end Audio Mixer For Live Streaming

Product details

Price	$439.00
Compatibility	Computer
Item Dimensions LxWxH	14.25 x 17 x 3.56 inches
Number of Channels	12+2
Connectivity Technology	Auxiliary
Mic & Stereo line inputs	XLR inputs and 2-band EQ on stereo inputs
Power supply	230 Volts

Introduction

The EPM12 is a high-performance 12-channel audio mixer with 2 configurable auxiliary buses, XLR-type, and 1/4-inches metal jack connector sockets.

The EPM12 has a stereo headphone output (stereo RCA) and an independent record output for monitoring. The input channels also have 3-band EQs with a swept mid control on mono inputs and +48V phantom power.

The EPM12 is designed to be compact, easy to use, and has an easy-to-read LCD display that can handle various tasks at once. One downside, however, is that this audio mixer is highly expensive and can cost you up to $439.00.

Pros

• 14 different channels
• 2 auxiliary buses
• 3-band EQ and +48V phantom power
• Precision GB30 mic preamps

Cons

• Extremely expensive

Bonus Tips: How To Record Your Live Stream Easily And Quickly?

Recording your live stream can be a great way to create content for your gaming channel or vlog. But it can also be a pain to set up and manage if you’re not familiar with the process.

Luckily, there are many user-friendly screen recorder programs available. Still, we recommend using Wondershare Filmora - a great option for gamers and vloggers, as it’s easy to use and comes with all the advanced features you need to record and edit your live stream.

Conclusion

In this article, we’ve provided a detailed review of the 6 best audio mixers for streaming live content on different platforms.

After testing and researching the six different audio mixers, we have concluded that the YOUSHARES Portable Digital Audio Mixer is the best audio console for streaming. This mixer is an affordable option that provides good sound quality and is easy to use. The Soundcraft EPM12 High-Performance 12-Channel Audio Mixer is a great choice for those who want a higher-end option.

We’ve also discussed a bonus tip for using Filmora to record your live streams and keep it for later sharing or any other purpose. Hopefully, you find this comprehensive review helpful and can now make the right buying decision.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Audit of Advanced Sound Editing: A Closer Look at Sound Forge Tools

In the music industry, the audio content version has changed drastically. As a result, music production and marketing are growing faster than ever, and only those with proper, updated tools and skills are capable of surviving in this era.

Audio editing tools are in demand for different purposes, such as adding effects to audio and removing pauses from a webinar session. Choosing an audio editor depends on many factors, such as price range, the purpose of using an editor, and skill level. The best editing program can help you get the best audio finishing - MAGIX Sound Forge.

If you are new to the music industry or a professional searching for an audio editor, this article will help you learn everything about Sound Forge.

Part 1. A Quick Verdict of Sound Forge

Sound Forge is one of the best software for professionals, beginners, and enthusiasts due to its simple and essential restoration tools that can help remove unnecessary background noises. However, this music software can remove 70% of the noise, leaving some cracks and pops, but still, users get a lot of improvement in the audio quality.

You can record and extract audio from video files. The customizable toolbars, interfaces, and a wide variety of presets give you a complete audio editing experience with Sound Forge.

The only drawback is that the software cannot handle multiple audio files and plugin effects together in the free version, making it useless for batch processing. However, you can get these features in the paid version.

Part 2. What is Sound Forge?

Sound Forge is an audio editor for newbies and professionals and has two versions, i.e., Sound Forge pro 12 and Sound Forge Audio Studio 13, released in April 2018 and January 2019, respectively. Although the software was developed in the US, MAGIX is doing further developments, so you get American originality and German modifications in one program.

The innovative features such as fast and powerful processing, editing, and workflow are why many producers, including Grammy winners, have chosen this tool globally for the past 20 years.

MAGIX has developed the latest version of this software, Sound Forge Pro 16 suite , setting new audio quality standards with advanced plug-ins.

Part 3. MAGIX Sound Forge 16 Review

Now that you know about Sound Forge and its origin, let’s review the software regarding price, features, and user ratings.

How much does Sound Forge cost?

Sound Forge is a paid software but excellent value for money and offers a wide range of features and plug-ins that make audio editing fun and easy.

The different versions are available at different pricing, and monthly or yearly subscriptions are also available.

Sound Forge Audio Studio 365 is available at 3-5$ per month per year with a starting price of 60$. Sound Forge Pro is available for 279$, Sound Forge Pro Suite for 399$, Sound Forge Pro 365 for 14.99$ per month, and Sound Forge Pro Suite 365 for 19.99$ per month.

Innovative features of Sound Forge

Here are some unique Sound Forge features that make it ideal for audio editing needs.

• Professional and Comprehensive audio editing: The improved workflow of the software allows you to edit, splice, and adjust audio files with just a few clicks and deliver a professional audio finish as precisely as you want.
• Audio restoration: Sound Forge restores vinyl and tapes into digital audio such as CDs, transforming outdated sound into exceptional studio quality. However, you need to have a vinyl converter turntable for this purpose.The Audio Studio version lacks the audio restoration plugins that the Pro Studio version offer.
• Recording any sound up to 32-bit/384 kHz: With Sound Forge, you can record podcasts, singing, webinars, and do a voice-over up to 32-bit/384 kHz and view the process with a live waveform display and real-time monitoring.
• Effects and effects presets: Sound Forge provide 11 DirectX audio effects and 90 effects preset to get the right sound for you. Furthermore, the software can let you preview the effects before applying them to your audio recordings.
• Import and export audio file: You can import or export any audio file into standard (MP3, FLAC, WAV, RAW, ASF, CDA, AIFF, VOX, OGG, MUS, and W64) formats with Sound Forge Audio Studio 16.

Score on G2

The overall G2 (a famous software review website) rating of Sound Forge is 4.3 out of 5. Users rated the software on the G2 platform as:

• 4 for “Ease of use
• 4 for “Quality Support
• 9 for “Ease of Setup

To help you have a better overview of MAGIX Sound Forge 16, we have prepared a review video below.

Video - New Features and Workflows of MAGIX Sound Forge 16

Part 4. Pros and Cons of MAGIX Sound Forge

Below are some Sound Forge pros and cons to help you make a quick decision about the software.

Pros of Sound Forge

• User-friendly: The top-notch software comes with a user-friendly interface, making it easy to learn and simple to control for beginners in the audio editing field.
• Compatibility: The high-quality audio software solution is available for both Windows and Mac operating systems.
• Customizable software: Sound Forge is the most customizable software, offering customization of toolbars to get the exact tools you need and letting you change audio editing windows arrangement.
• Support VST plugin: Sound Forge supports the VST plugin that is used to integrate software audio effects and effect plugins to help you create a more compelling final product.

Cons of Sound Forge

• No Batch Processing: one main drawback of Sound Forge is that it cannot do batch processing, making it useless to process multiple audio files and plug-ins together.
• Noise reduction/ Noise cancellation: The software does not do much for noise reduction; its “Noise Gate Technology” distort the recording instead of filtering the noise.

Part 5. MAGIX Sound Forge vs. Audacity

Both Sound Forge and Audacity are audio editing and mixing software. By comparing their features, you can get an idea to which one to use for your audio editing projects.

What is Audacity?

Audacity is free and open-source software developed by Dominic Mazzoni and Roger Dannenberg and released on May 28, 2000. In April 2021, Muse group acquired the Audacity trademark but kept the application free and open source.

Audacity offers a great variety of features, such as a playback/record tool, editing options, and a wide range of effects that help professionals to adjust soundtracks, import and export audio files in any standard format, and analyze sound frequencies.

Comparing Sound Forge and Audacity

Features	Sound Forge	Audacity
Price/ Value for money	4.7/5	4.5/5
Compatibility	Windows and Mac	Windows and Mac
Ease of Use	8.4/10	8.4/10
Advanced Features	DynamicEQLoudness visualizationOptimized multichannel workflow	Multiple tracksAuto audio duckingBackground noise removalAudio filters
Scores on G2	4.3/5	4.5/5

Our Recommendations

Due to the advanced features and high scores on G2, we recommend using Audacity. However, other factors always come into play as the audio editing demands and needs change with time. So, Sound Forge can be a good option for you as a nomad in the music editing industry.

Most companies (with 50-200 employees and 1M-10M revenue) and the higher education industry in the United States are using Sound Forge.

On the other hand, businesses often use Audacity for marketing purposes, such as making Podcasts. The software can record audio for PowerPoint presentations to help visually impaired employees.

Conclusion

In this article, we’ve introduced Sound Forge, its price, the software’s features, and what the users think about it. Later in the guide, we compared Sound Forge with one of the leading music editors, Audacity, and learned how they stack up against each other.

Hopefully, you can now decide better about choosing a music editing software for your audio recording and editing needs.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Part 4. Pros and Cons of MAGIX Sound Forge

Below are some Sound Forge pros and cons to help you make a quick decision about the software.

Pros of Sound Forge

• User-friendly: The top-notch software comes with a user-friendly interface, making it easy to learn and simple to control for beginners in the audio editing field.
• Compatibility: The high-quality audio software solution is available for both Windows and Mac operating systems.
• Customizable software: Sound Forge is the most customizable software, offering customization of toolbars to get the exact tools you need and letting you change audio editing windows arrangement.
• Support VST plugin: Sound Forge supports the VST plugin that is used to integrate software audio effects and effect plugins to help you create a more compelling final product.

Cons of Sound Forge

• No Batch Processing: one main drawback of Sound Forge is that it cannot do batch processing, making it useless to process multiple audio files and plug-ins together.
• Noise reduction/ Noise cancellation: The software does not do much for noise reduction; its “Noise Gate Technology” distort the recording instead of filtering the noise.

Part 5. MAGIX Sound Forge vs. Audacity

Both Sound Forge and Audacity are audio editing and mixing software. By comparing their features, you can get an idea to which one to use for your audio editing projects.

What is Audacity?

Audacity is free and open-source software developed by Dominic Mazzoni and Roger Dannenberg and released on May 28, 2000. In April 2021, Muse group acquired the Audacity trademark but kept the application free and open source.

Audacity offers a great variety of features, such as a playback/record tool, editing options, and a wide range of effects that help professionals to adjust soundtracks, import and export audio files in any standard format, and analyze sound frequencies.

Comparing Sound Forge and Audacity

Features	Sound Forge	Audacity
Price/ Value for money	4.7/5	4.5/5
Compatibility	Windows and Mac	Windows and Mac
Ease of Use	8.4/10	8.4/10
Advanced Features	DynamicEQLoudness visualizationOptimized multichannel workflow	Multiple tracksAuto audio duckingBackground noise removalAudio filters
Scores on G2	4.3/5	4.5/5

Our Recommendations

Due to the advanced features and high scores on G2, we recommend using Audacity. However, other factors always come into play as the audio editing demands and needs change with time. So, Sound Forge can be a good option for you as a nomad in the music editing industry.

Most companies (with 50-200 employees and 1M-10M revenue) and the higher education industry in the United States are using Sound Forge.

On the other hand, businesses often use Audacity for marketing purposes, such as making Podcasts. The software can record audio for PowerPoint presentations to help visually impaired employees.

Conclusion

In this article, we’ve introduced Sound Forge, its price, the software’s features, and what the users think about it. Later in the guide, we compared Sound Forge with one of the leading music editors, Audacity, and learned how they stack up against each other.

Hopefully, you can now decide better about choosing a music editing software for your audio recording and editing needs.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Also read: