Ensuring Consistent Acoustic Output: How to Calibrate Volumes in VLC Media Center

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

How to Remove Drums From Songs Online

Many drummers are interested in getting the best out of audio tracks. With drum remover online tools readily available, it is now easier to do this. A good drum extract online tool will help you practice playing the drums to your favorite songs. It is also a great way for DJs and beatmakers to make drum loops and fills. In this article, we explore the readily available drum extract free online tools that help in achieving this and more.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits Free Download Learn More

Part 1. How to Remove Drums From Any Song: 2 Easy Methods

You’ve probably been there. Wanted to make a drum cover video of our favorite song, but did not know if a drumless version exists. You may have wondered whether there is a way to isolate and remove a drum track easily. Luckily, there are several drum extract free download tools that you can use to take the drums out of any song with just a few clicks. Tools like Media.io . UniConverter , Moises.ai , and LALAL.ai are known to effectively remove drums from audio files. Let’s have a look at the techniques that you can use:

1. Extract Drums from a Song Online With A Web App

Using an online web app is one of the easiest ways to extract drums from your song tracks. This is a great approach for beginners or people who do not have production experience. Probably you do not want to waste time finding the audio files, converting them from iTunes, and bringing them into a DAW. A digital audio workstation (DAW) is an electronic system that is designed for recording, editing, and playing back digital audio files. It usually plays the following functions:

• Loading and editing audio
• Recording new tracks
• Mixing and applying effects
• Mastering
• Exporting finished mixes

After bringing the files to the DAW, you still have to remove drums manually for the song. The process will have a lot of clicking and file management that will take time and extra effort. With a web app drum extractor, the process is super easy. Take Moises.ai , for instance, users extract drums from any public media URL in minutes.

This makes it a great choice when removing drums from music on SoundCloud or the latest video of YouTube. Why would you try Moises.ai?

• Cloud-based AI application – Effectively extracts drums from any public media URL
• User-friendly UI – The platform is simple and easy to use for all experience levels
• Keep Track of Progress – The Moises.ai dashboard keeps a library of all songs you have isolated, allowing you to playback and download on-demand
• Download Separate Files – Once your original audio file has been separated, you can download the vocals, drums, beats, and bass files to your local PC
• Free Version is Available – Try out the service on the free version before committing your money

Although some tracks will not isolate the best with this web app, it gets the work done. Once you download the files, it is easy to bring the songs into DAW to play along. The process makes it simple to create drum covers fast that you can play along with other web mixers.

2. Extract Drums from a Song Online with VST Plugins

For those who want to do more of the work, VST plugins for removing drums from music are a great option. These are software modules that take the form of real-time effects or instruments. They may also have MIDI effects, giving more freedom with audio editing, The inability to adjust or customize settings when extracting drums from a soundtrack is one of the major downfalls of a web-based application. With VST plugins, this issue is no longer a concern.

With VSTs, you are more flexible and able to deliver better results. They are often used in applications that support VST technology, including Cakewalk Sonar, Steinberg Cubase, Sound Forge Pro, Ableton Live, and many others. Some of the most common ones include:

• AudioSourceRe
• UNMIX Drums
• XTrax Stem 2
• Drum Extract

VST plugins are great for customizing your audio results. You have two ways to remove drums from a song using a VST plugin and DAW: using a compressor or an equalizer. When good results are not forthcoming, you can try to EQ or equalize frequencies that seem out of the soundtrack. This will lower the perceived volume of the drums, providing clearer vocals. Another approach is to use a parametric equalizer by reducing the frequencies by some dB for precise results.

• 4k (cymbals)
• 90 Hz (kick drum)
• 150 Hz (snare drum)

Just play around with the EQ, mixing your drum tracks above the recordings. The end will be your kit’s flaming against the original recording for perfect results.

Part 2. Remove and Edit Drums in Audio with Filmora

Removing drums from a song becomes easier with the right tools. In most cases, you will want to remove the drums and process your audio file further. Probably use the file to prepare for karaoke or editing videos on YouTube or TikTok. With Wondershare Filmora, you get to do all this and more. The most recent Filmora Version 13 is an excellent choice for editing audio files on the go. It comes with some amazing AI features that make it super simple to separate vocals, beats, drums, piano, and more in audio tracks.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Vocal Remover

Extracting drums from songs is made easier with Filmora’s AI Vocal Remover. The AI feature accurately separates vocals and drums from any song in minutes. It is also a great tool for extracting acapella from audio tracks and dubbing videos freely by removing vocals. With the ability to keep the same high-quality for audio and video when removing the vocals, the feature is effective for different kinds of projects:

• Remove Vocals from Audio – With only one click, the feature removes vocals from audio while maintaining high-quality production. This means you can dub any video without covering up the current and create great drum soundtracks within minutes.
• Effective Vocal Separation – The AI-powered feature isolates vocals with exceptional quality without losing the fidelity of your audio. It saves you time and effort that you would have spent doing all that manually.
• Listen to Results Instantly: With Filmora, you do not have to download your processed files to listen to the results. Simply preview and listen to the results in the editor to make sure you are getting the results that you want.
• Remove Other Audio Elements from the Video: The AI Vocal Remover allows you to remove vocals and other audio elements, including drums. You may also go further to remove any unwanted audio elements to enhance your video editing process.
• Dub Videos with Minimal Efforts – The feature allows you to completely remove the original recording and input your own fresh ones. This helps you create highly professional and clearly dubbed videos.

How to Extract Drums from Songs with AI Vocal Remover

The AI Vocal Remover feature on Filmora offers a simple and easy way to extract drums from your favorite songs. Here is a quick guide on how to use the feature:

Step 1Launch Filmora

To start using the AI Vocal Remover feature, launch Filmora on your desktop. Then click “New Project” in the startup window to prepare the software for the next steps.

Step 2Import Your Song or Sound Track

On the customer toolbar, select “Media” and then click on the “Files” icon. This will allow you to import the files you want to edit with Filmora.

Step 3Start the AI Vocal Remover Feature

Drag and drop the files you have imported to Filmora to the timeline so you can start the editing process. Select the song you want to edit in the timeline and select “Audio” option. Then click AI Vocal Remover from the options available. Navigate the AI Vocal Remover to edit the audio as desired.

Click here

Conclusion

You may want to extract drums from your favorite songs for various reasons. Maybe you want to create a drum cover video on the latest song or have a drumless version of a certain soundtrack. There are several ways to isolate and remove drums from tracks with ease. Using a web-based drum remover tool or VST plugins is the most common option. However, Wondershare Filmora offers some amazing features that allow you to extract drums from your songs and do more. You get to edit your files further and achieve greater quality.

Free Download Free Download Learn More

Part 1. How to Remove Drums From Any Song: 2 Easy Methods

You’ve probably been there. Wanted to make a drum cover video of our favorite song, but did not know if a drumless version exists. You may have wondered whether there is a way to isolate and remove a drum track easily. Luckily, there are several drum extract free download tools that you can use to take the drums out of any song with just a few clicks. Tools like Media.io . UniConverter , Moises.ai , and LALAL.ai are known to effectively remove drums from audio files. Let’s have a look at the techniques that you can use:

1. Extract Drums from a Song Online With A Web App

Using an online web app is one of the easiest ways to extract drums from your song tracks. This is a great approach for beginners or people who do not have production experience. Probably you do not want to waste time finding the audio files, converting them from iTunes, and bringing them into a DAW. A digital audio workstation (DAW) is an electronic system that is designed for recording, editing, and playing back digital audio files. It usually plays the following functions:

• Loading and editing audio
• Recording new tracks
• Mixing and applying effects
• Mastering
• Exporting finished mixes

After bringing the files to the DAW, you still have to remove drums manually for the song. The process will have a lot of clicking and file management that will take time and extra effort. With a web app drum extractor, the process is super easy. Take Moises.ai , for instance, users extract drums from any public media URL in minutes.

This makes it a great choice when removing drums from music on SoundCloud or the latest video of YouTube. Why would you try Moises.ai?

• Cloud-based AI application – Effectively extracts drums from any public media URL
• User-friendly UI – The platform is simple and easy to use for all experience levels
• Keep Track of Progress – The Moises.ai dashboard keeps a library of all songs you have isolated, allowing you to playback and download on-demand
• Download Separate Files – Once your original audio file has been separated, you can download the vocals, drums, beats, and bass files to your local PC
• Free Version is Available – Try out the service on the free version before committing your money

Although some tracks will not isolate the best with this web app, it gets the work done. Once you download the files, it is easy to bring the songs into DAW to play along. The process makes it simple to create drum covers fast that you can play along with other web mixers.

2. Extract Drums from a Song Online with VST Plugins

For those who want to do more of the work, VST plugins for removing drums from music are a great option. These are software modules that take the form of real-time effects or instruments. They may also have MIDI effects, giving more freedom with audio editing, The inability to adjust or customize settings when extracting drums from a soundtrack is one of the major downfalls of a web-based application. With VST plugins, this issue is no longer a concern.

With VSTs, you are more flexible and able to deliver better results. They are often used in applications that support VST technology, including Cakewalk Sonar, Steinberg Cubase, Sound Forge Pro, Ableton Live, and many others. Some of the most common ones include:

• AudioSourceRe
• UNMIX Drums
• XTrax Stem 2
• Drum Extract

VST plugins are great for customizing your audio results. You have two ways to remove drums from a song using a VST plugin and DAW: using a compressor or an equalizer. When good results are not forthcoming, you can try to EQ or equalize frequencies that seem out of the soundtrack. This will lower the perceived volume of the drums, providing clearer vocals. Another approach is to use a parametric equalizer by reducing the frequencies by some dB for precise results.

• 4k (cymbals)
• 90 Hz (kick drum)
• 150 Hz (snare drum)

Just play around with the EQ, mixing your drum tracks above the recordings. The end will be your kit’s flaming against the original recording for perfect results.

Part 2. Remove and Edit Drums in Audio with Filmora

Removing drums from a song becomes easier with the right tools. In most cases, you will want to remove the drums and process your audio file further. Probably use the file to prepare for karaoke or editing videos on YouTube or TikTok. With Wondershare Filmora, you get to do all this and more. The most recent Filmora Version 13 is an excellent choice for editing audio files on the go. It comes with some amazing AI features that make it super simple to separate vocals, beats, drums, piano, and more in audio tracks.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Vocal Remover

Extracting drums from songs is made easier with Filmora’s AI Vocal Remover. The AI feature accurately separates vocals and drums from any song in minutes. It is also a great tool for extracting acapella from audio tracks and dubbing videos freely by removing vocals. With the ability to keep the same high-quality for audio and video when removing the vocals, the feature is effective for different kinds of projects:

• Remove Vocals from Audio – With only one click, the feature removes vocals from audio while maintaining high-quality production. This means you can dub any video without covering up the current and create great drum soundtracks within minutes.
• Effective Vocal Separation – The AI-powered feature isolates vocals with exceptional quality without losing the fidelity of your audio. It saves you time and effort that you would have spent doing all that manually.
• Listen to Results Instantly: With Filmora, you do not have to download your processed files to listen to the results. Simply preview and listen to the results in the editor to make sure you are getting the results that you want.
• Remove Other Audio Elements from the Video: The AI Vocal Remover allows you to remove vocals and other audio elements, including drums. You may also go further to remove any unwanted audio elements to enhance your video editing process.
• Dub Videos with Minimal Efforts – The feature allows you to completely remove the original recording and input your own fresh ones. This helps you create highly professional and clearly dubbed videos.

How to Extract Drums from Songs with AI Vocal Remover

The AI Vocal Remover feature on Filmora offers a simple and easy way to extract drums from your favorite songs. Here is a quick guide on how to use the feature:

Step 1Launch Filmora

To start using the AI Vocal Remover feature, launch Filmora on your desktop. Then click “New Project” in the startup window to prepare the software for the next steps.

Step 2Import Your Song or Sound Track

On the customer toolbar, select “Media” and then click on the “Files” icon. This will allow you to import the files you want to edit with Filmora.

Step 3Start the AI Vocal Remover Feature

Drag and drop the files you have imported to Filmora to the timeline so you can start the editing process. Select the song you want to edit in the timeline and select “Audio” option. Then click AI Vocal Remover from the options available. Navigate the AI Vocal Remover to edit the audio as desired.

Conclusion

You may want to extract drums from your favorite songs for various reasons. Maybe you want to create a drum cover video on the latest song or have a drumless version of a certain soundtrack. There are several ways to isolate and remove drums from tracks with ease. Using a web-based drum remover tool or VST plugins is the most common option. However, Wondershare Filmora offers some amazing features that allow you to extract drums from your songs and do more. You get to edit your files further and achieve greater quality.

Audiophile’s Toolkit: Implementing Smooth Audio Transitions with Ducking in Adobe Premiere Pro (Mac)

Tutorial on Audio Ducking in Adobe Premiere Pro on Mac

Benjamin Arango

Oct 26, 2023• Proven solutions

Too many times, while mixing voiceover with the background music in a video, the dialogues don’t seem to be audible. That’s when we follow the process of audio ducking in Premiere Pro that would automatically lower the volume of the background music whenever there is a dialogue.

The best thing about Premiere Pro audio ducking is that it is an automatic process and we don’t need to put a lot of effort. To make your job easier, I’m going to let you know how to use the Adobe Premiere Pro audio ducking feature in a step by step manner in this guide.

Part 1: How to Use Audio Ducking to Balance Music and Voiceover in Adobe Premiere Pro on Mac?

If you have been using Adobe Premiere Pro on Mac, then you would already be familiar with the wide range of editing features that it has. One of them is the Premiere Pro audio ducking option that comes inbuilt in the application. Using it, you can automatically lower the volume of the background music and amplify your dialogues.

To perform auto-ducking in Premiere Pro, we first need to define each audio track and then use the ducking feature. Here’s how you can also perform audio ducking in Premiere Pro like a pro.

Step 1: Define the Audio Types

Since Adobe Premiere Pro can’t automatically detect the type of sounds, you need to do it manually. To do audio ducking in Premiere Pro, you can first import your video clip and the voiceover to the application, and drag them to the working timeline.

Now, you can first select the voiceover file that you want to amplify, and from the sidebar on the right, click on “Dialogue” as the type of the audio file.

Once you mark the audio type, you will get different options. Here, go to the “Loudness” option and click on the “Auto Match” button.

Afterward, you can do the same for your background audio file. Select the file and choose its audio type as “Music”. You can also set its loudness to “Auto Match” if you want to.

Step 2: Perform Auto Ducking in Premiere Pro

Now when you have set the audio types, you can just find the Ducking option on the sidebar and turn it on. Here, you can first click on the dialogue icon from the top and get the needed options. You can adjust its sensitivity and set a level or improve or reduce its quality.

Apart from the dialogue icon, you can also click on the Music icon and do the same. For instance, you can reduce the quality of the background music and increase the level of the dialogue track.

Step 3: Make the Final Changes

Great! You can now preview the changes you have made and check the audio ducking results in Premiere Pro. If you want to finalize things, then you can perform keyframing and manually adjust the volume.

Furthermore, you can also perform an instant hard ducking in Premiere Pro. For this, just choose the track, go to the side panel, and select Preset > Music > Hard Vocal Ducking. While it would get instant results in Adobe Premiere audio ducking, the results might not be so effective.

Part 2: Wondershare Filmora

As you can see, the Premiere Pro audio ducking feature can get a bit complicated if you are a beginner. Therefore, if you are looking for a simpler and more effective automatic ducking solution, then use Wondershare Filmora. This intuitive and diverse video/audio editing tool has an automatic audio ducking option that would make your job a whole lot easier.

To learn how to perform automatic audio ducking in your videos on Mac via Wondershare Filmora, one can follow these steps:

Step 1: Load the Video or Audio Files on Filmora

Firstly, you can just launch Wondershare Filmora on your Mac and import your videos/audios. You can drag and drop the files or just go to its Import Menu option to browse the files. Afterward, you can drag the files to the timeline at the bottom to work on them.

On the native interface of Filmora, you can also directly record voiceovers. Just click on the voiceover icon (below the preview window) and start recording any dialogue.

Not just that, you can also find a wide range of royalty-free music on Filmora that you can readily use in your projects without any copyright issues.

Step 2: Perform Automatic Audio Ducking on Filmora

Great! Now you can see your video and the audio track on the timeline of Filmora. At first, you need to select the voiceover (or any other track) that you want to amplify.

Once the desired audio track is selected, right-click it, and choose the “Adjust Audio” option.

As the dedicated Audio Editor will open, just go to the “Ducking” option at the bottom and turn on the “Lower the volume of other clips” feature. You can further select the level to lower the volume of other background clips in the video here.

Step 3: Save and Export Your Video

That’s it! After making the changes, just click on the “OK” button and Filmora would automatically adjust the volume of other clips. You can further make the needed changes in the video and click on the “Export” icon. This will let you save the project in the desired format and resolution on your computer.

Who knew it would be so easy to do auto-ducking in Premiere Pro, right? Though, if you are looking for even a simpler alternative to Adobe Premiere audio ducking, then consider using Wondershare Filmora. A user-friendly and resourceful video editor, it offers a wide range of features and other inbuilt tools that would meet every post-production requirement of yours in one place.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Too many times, while mixing voiceover with the background music in a video, the dialogues don’t seem to be audible. That’s when we follow the process of audio ducking in Premiere Pro that would automatically lower the volume of the background music whenever there is a dialogue.

The best thing about Premiere Pro audio ducking is that it is an automatic process and we don’t need to put a lot of effort. To make your job easier, I’m going to let you know how to use the Adobe Premiere Pro audio ducking feature in a step by step manner in this guide.

Part 1: How to Use Audio Ducking to Balance Music and Voiceover in Adobe Premiere Pro on Mac?

If you have been using Adobe Premiere Pro on Mac, then you would already be familiar with the wide range of editing features that it has. One of them is the Premiere Pro audio ducking option that comes inbuilt in the application. Using it, you can automatically lower the volume of the background music and amplify your dialogues.

To perform auto-ducking in Premiere Pro, we first need to define each audio track and then use the ducking feature. Here’s how you can also perform audio ducking in Premiere Pro like a pro.

Step 1: Define the Audio Types

Since Adobe Premiere Pro can’t automatically detect the type of sounds, you need to do it manually. To do audio ducking in Premiere Pro, you can first import your video clip and the voiceover to the application, and drag them to the working timeline.

Now, you can first select the voiceover file that you want to amplify, and from the sidebar on the right, click on “Dialogue” as the type of the audio file.

Once you mark the audio type, you will get different options. Here, go to the “Loudness” option and click on the “Auto Match” button.

Afterward, you can do the same for your background audio file. Select the file and choose its audio type as “Music”. You can also set its loudness to “Auto Match” if you want to.

Step 2: Perform Auto Ducking in Premiere Pro

Now when you have set the audio types, you can just find the Ducking option on the sidebar and turn it on. Here, you can first click on the dialogue icon from the top and get the needed options. You can adjust its sensitivity and set a level or improve or reduce its quality.

Apart from the dialogue icon, you can also click on the Music icon and do the same. For instance, you can reduce the quality of the background music and increase the level of the dialogue track.

Step 3: Make the Final Changes

Great! You can now preview the changes you have made and check the audio ducking results in Premiere Pro. If you want to finalize things, then you can perform keyframing and manually adjust the volume.

Furthermore, you can also perform an instant hard ducking in Premiere Pro. For this, just choose the track, go to the side panel, and select Preset > Music > Hard Vocal Ducking. While it would get instant results in Adobe Premiere audio ducking, the results might not be so effective.

Part 2: Wondershare Filmora

As you can see, the Premiere Pro audio ducking feature can get a bit complicated if you are a beginner. Therefore, if you are looking for a simpler and more effective automatic ducking solution, then use Wondershare Filmora. This intuitive and diverse video/audio editing tool has an automatic audio ducking option that would make your job a whole lot easier.

To learn how to perform automatic audio ducking in your videos on Mac via Wondershare Filmora, one can follow these steps:

Step 1: Load the Video or Audio Files on Filmora

Firstly, you can just launch Wondershare Filmora on your Mac and import your videos/audios. You can drag and drop the files or just go to its Import Menu option to browse the files. Afterward, you can drag the files to the timeline at the bottom to work on them.

On the native interface of Filmora, you can also directly record voiceovers. Just click on the voiceover icon (below the preview window) and start recording any dialogue.

Not just that, you can also find a wide range of royalty-free music on Filmora that you can readily use in your projects without any copyright issues.

Step 2: Perform Automatic Audio Ducking on Filmora

Great! Now you can see your video and the audio track on the timeline of Filmora. At first, you need to select the voiceover (or any other track) that you want to amplify.

Once the desired audio track is selected, right-click it, and choose the “Adjust Audio” option.

As the dedicated Audio Editor will open, just go to the “Ducking” option at the bottom and turn on the “Lower the volume of other clips” feature. You can further select the level to lower the volume of other background clips in the video here.

Step 3: Save and Export Your Video

That’s it! After making the changes, just click on the “OK” button and Filmora would automatically adjust the volume of other clips. You can further make the needed changes in the video and click on the “Export” icon. This will let you save the project in the desired format and resolution on your computer.

Who knew it would be so easy to do auto-ducking in Premiere Pro, right? Though, if you are looking for even a simpler alternative to Adobe Premiere audio ducking, then consider using Wondershare Filmora. A user-friendly and resourceful video editor, it offers a wide range of features and other inbuilt tools that would meet every post-production requirement of yours in one place.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Too many times, while mixing voiceover with the background music in a video, the dialogues don’t seem to be audible. That’s when we follow the process of audio ducking in Premiere Pro that would automatically lower the volume of the background music whenever there is a dialogue.

The best thing about Premiere Pro audio ducking is that it is an automatic process and we don’t need to put a lot of effort. To make your job easier, I’m going to let you know how to use the Adobe Premiere Pro audio ducking feature in a step by step manner in this guide.

Part 1: How to Use Audio Ducking to Balance Music and Voiceover in Adobe Premiere Pro on Mac?

If you have been using Adobe Premiere Pro on Mac, then you would already be familiar with the wide range of editing features that it has. One of them is the Premiere Pro audio ducking option that comes inbuilt in the application. Using it, you can automatically lower the volume of the background music and amplify your dialogues.

To perform auto-ducking in Premiere Pro, we first need to define each audio track and then use the ducking feature. Here’s how you can also perform audio ducking in Premiere Pro like a pro.

Step 1: Define the Audio Types

Since Adobe Premiere Pro can’t automatically detect the type of sounds, you need to do it manually. To do audio ducking in Premiere Pro, you can first import your video clip and the voiceover to the application, and drag them to the working timeline.

Now, you can first select the voiceover file that you want to amplify, and from the sidebar on the right, click on “Dialogue” as the type of the audio file.

Once you mark the audio type, you will get different options. Here, go to the “Loudness” option and click on the “Auto Match” button.

Afterward, you can do the same for your background audio file. Select the file and choose its audio type as “Music”. You can also set its loudness to “Auto Match” if you want to.

Step 2: Perform Auto Ducking in Premiere Pro

Now when you have set the audio types, you can just find the Ducking option on the sidebar and turn it on. Here, you can first click on the dialogue icon from the top and get the needed options. You can adjust its sensitivity and set a level or improve or reduce its quality.

Apart from the dialogue icon, you can also click on the Music icon and do the same. For instance, you can reduce the quality of the background music and increase the level of the dialogue track.

Step 3: Make the Final Changes

Great! You can now preview the changes you have made and check the audio ducking results in Premiere Pro. If you want to finalize things, then you can perform keyframing and manually adjust the volume.

Furthermore, you can also perform an instant hard ducking in Premiere Pro. For this, just choose the track, go to the side panel, and select Preset > Music > Hard Vocal Ducking. While it would get instant results in Adobe Premiere audio ducking, the results might not be so effective.

Part 2: Wondershare Filmora

As you can see, the Premiere Pro audio ducking feature can get a bit complicated if you are a beginner. Therefore, if you are looking for a simpler and more effective automatic ducking solution, then use Wondershare Filmora. This intuitive and diverse video/audio editing tool has an automatic audio ducking option that would make your job a whole lot easier.

To learn how to perform automatic audio ducking in your videos on Mac via Wondershare Filmora, one can follow these steps:

Step 1: Load the Video or Audio Files on Filmora

Firstly, you can just launch Wondershare Filmora on your Mac and import your videos/audios. You can drag and drop the files or just go to its Import Menu option to browse the files. Afterward, you can drag the files to the timeline at the bottom to work on them.

On the native interface of Filmora, you can also directly record voiceovers. Just click on the voiceover icon (below the preview window) and start recording any dialogue.

Not just that, you can also find a wide range of royalty-free music on Filmora that you can readily use in your projects without any copyright issues.

Step 2: Perform Automatic Audio Ducking on Filmora

Great! Now you can see your video and the audio track on the timeline of Filmora. At first, you need to select the voiceover (or any other track) that you want to amplify.

Once the desired audio track is selected, right-click it, and choose the “Adjust Audio” option.

As the dedicated Audio Editor will open, just go to the “Ducking” option at the bottom and turn on the “Lower the volume of other clips” feature. You can further select the level to lower the volume of other background clips in the video here.

Step 3: Save and Export Your Video

That’s it! After making the changes, just click on the “OK” button and Filmora would automatically adjust the volume of other clips. You can further make the needed changes in the video and click on the “Export” icon. This will let you save the project in the desired format and resolution on your computer.

Who knew it would be so easy to do auto-ducking in Premiere Pro, right? Though, if you are looking for even a simpler alternative to Adobe Premiere audio ducking, then consider using Wondershare Filmora. A user-friendly and resourceful video editor, it offers a wide range of features and other inbuilt tools that would meet every post-production requirement of yours in one place.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Too many times, while mixing voiceover with the background music in a video, the dialogues don’t seem to be audible. That’s when we follow the process of audio ducking in Premiere Pro that would automatically lower the volume of the background music whenever there is a dialogue.

The best thing about Premiere Pro audio ducking is that it is an automatic process and we don’t need to put a lot of effort. To make your job easier, I’m going to let you know how to use the Adobe Premiere Pro audio ducking feature in a step by step manner in this guide.

Part 1: How to Use Audio Ducking to Balance Music and Voiceover in Adobe Premiere Pro on Mac?

If you have been using Adobe Premiere Pro on Mac, then you would already be familiar with the wide range of editing features that it has. One of them is the Premiere Pro audio ducking option that comes inbuilt in the application. Using it, you can automatically lower the volume of the background music and amplify your dialogues.

To perform auto-ducking in Premiere Pro, we first need to define each audio track and then use the ducking feature. Here’s how you can also perform audio ducking in Premiere Pro like a pro.

Step 1: Define the Audio Types

Since Adobe Premiere Pro can’t automatically detect the type of sounds, you need to do it manually. To do audio ducking in Premiere Pro, you can first import your video clip and the voiceover to the application, and drag them to the working timeline.

Now, you can first select the voiceover file that you want to amplify, and from the sidebar on the right, click on “Dialogue” as the type of the audio file.

Once you mark the audio type, you will get different options. Here, go to the “Loudness” option and click on the “Auto Match” button.

Afterward, you can do the same for your background audio file. Select the file and choose its audio type as “Music”. You can also set its loudness to “Auto Match” if you want to.

Step 2: Perform Auto Ducking in Premiere Pro

Now when you have set the audio types, you can just find the Ducking option on the sidebar and turn it on. Here, you can first click on the dialogue icon from the top and get the needed options. You can adjust its sensitivity and set a level or improve or reduce its quality.

Apart from the dialogue icon, you can also click on the Music icon and do the same. For instance, you can reduce the quality of the background music and increase the level of the dialogue track.

Step 3: Make the Final Changes

Great! You can now preview the changes you have made and check the audio ducking results in Premiere Pro. If you want to finalize things, then you can perform keyframing and manually adjust the volume.

Furthermore, you can also perform an instant hard ducking in Premiere Pro. For this, just choose the track, go to the side panel, and select Preset > Music > Hard Vocal Ducking. While it would get instant results in Adobe Premiere audio ducking, the results might not be so effective.

Part 2: Wondershare Filmora

As you can see, the Premiere Pro audio ducking feature can get a bit complicated if you are a beginner. Therefore, if you are looking for a simpler and more effective automatic ducking solution, then use Wondershare Filmora. This intuitive and diverse video/audio editing tool has an automatic audio ducking option that would make your job a whole lot easier.

To learn how to perform automatic audio ducking in your videos on Mac via Wondershare Filmora, one can follow these steps:

Step 1: Load the Video or Audio Files on Filmora

Firstly, you can just launch Wondershare Filmora on your Mac and import your videos/audios. You can drag and drop the files or just go to its Import Menu option to browse the files. Afterward, you can drag the files to the timeline at the bottom to work on them.

On the native interface of Filmora, you can also directly record voiceovers. Just click on the voiceover icon (below the preview window) and start recording any dialogue.

Not just that, you can also find a wide range of royalty-free music on Filmora that you can readily use in your projects without any copyright issues.

Step 2: Perform Automatic Audio Ducking on Filmora

Great! Now you can see your video and the audio track on the timeline of Filmora. At first, you need to select the voiceover (or any other track) that you want to amplify.

Once the desired audio track is selected, right-click it, and choose the “Adjust Audio” option.

As the dedicated Audio Editor will open, just go to the “Ducking” option at the bottom and turn on the “Lower the volume of other clips” feature. You can further select the level to lower the volume of other background clips in the video here.

Step 3: Save and Export Your Video

That’s it! After making the changes, just click on the “OK” button and Filmora would automatically adjust the volume of other clips. You can further make the needed changes in the video and click on the “Export” icon. This will let you save the project in the desired format and resolution on your computer.

Who knew it would be so easy to do auto-ducking in Premiere Pro, right? Though, if you are looking for even a simpler alternative to Adobe Premiere audio ducking, then consider using Wondershare Filmora. A user-friendly and resourceful video editor, it offers a wide range of features and other inbuilt tools that would meet every post-production requirement of yours in one place.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: