“Enriching Video Audio Without a Dime: 3 Creative, Free Methods Explored”

The audio or music of video can dramatically affect our perception of a video – no matter whether it’s a home movie, a commercial, or a video presentation. But what if all you have is silent footage or with just a crackled and distorted audio file that needs to be replaced, and at this time, you want to add a sound to the video?

To solve this problem, I humbly recommend Wondershare Filmora . With it, you can easily add audio to video, record the voiceover directly and add it to video, or replace the original audio track (stream) with a new audio file.

In case you want to add music to video with some online tools, please leave a comment below so I can test some online solutions and share with you the best online tools to add audio to video free. I recommend Filmora because its requirement on the network isn’t so high compared to the online tools.

Below is a creative way of adding sound effects to video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Sonic Cleanliness: Removing Unwanted Resonance From Your Film’s Audio Track

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

These Titles Emphasize the Process or Techniques Involved in Removing or Isolating Audio From Video Content, Maintaining a Similar Meaning and Focus as “How to Remove Audio From Video.”

How to Remove Audio From Video in Magix Movie Edit Pro

Shanoon Cox

Apr 30, 2024• Proven solutions

A poorly recorded audio can ruin a perfectly captured video, but luckily all video editing programs allow you to remove audio files you don’t want to use from your project. If you recorded the audio from your Smartphone or a camera that doesn’t feature a professional microphone, chances are that the audio in that video clip will not be used in the project you are working on.

We will show you how you can remove audio files from a video in Magix Edit Pro in only a several simple steps that take a minimum amount of effort and time.

Removing Audio from Video in Magix Movie Edit Pro

During the editing process original audio files are often separated from the video files because video editors can manipulate video files better and the audio files are replaced by the sound recordings of better quality.

1. Place the video clips onto the timeline

The first step in the process of removing audio from the video will require you to place the video clip onto the timeline. You can do so by clicking on the ‘Import’ tab and dragging the file to the timeline from the folder in which the video clip is stored. After you’ve positioned the video file onto the video track in the Magix Movie Edit Pro you will notice that the audio file isn’t displayed, which means that audio and video tracks are linked together and that all the changes you make on the video file will also apply to the audio file.

2.Separate the audio and the video

In order to avoid changing the speed of the audio file when you are trying to alter the playback speed of the video file, you need to separate the two files. You can do this easily, by selecting the video clip on the timeline and clicking the ‘Ungroup’ icon located on the editor’s toolbar. Upon clicking the ‘Ungroup’ icon you will be able to see the audio file on the track directly below the video track.

If you would like to remove an entire file, select it and then right-click on it. From the menu that emerges select the ‘Delete objects’ option or just hit the ‘Delete’ button on your keyboard. However, if you would like to use parts of the original file utilize the ‘Split objects’ tool to separate the parts of the audio file you want to use, from the ones you don’t need. Then after cutting all the parts of the file, you don’t want to use, delete them by using one of the two methods we described.

In order to reach a high level of precision, click on the ‘Zoom current object’ icon that is located in the lower right corner of the editor. Choosing to zoom in on the audio file you are working on will enable you to have a better control over it and apply all the changes and audio effects with a higher level of precision.

3.Export the project as an audio file

After you made all the changes you wanted and removed all the parts of audio files you didn’t want to feature in your video you can export only an audio file.

Select the audio files you want to export on the editor’s audio track and click on ‘File/Movie export’. From the ‘Movie export’ menu, select one of following options ‘Audio as MP3’ or ‘Audio as WAV’, depending on the output format you wish to use. Adjust the export settings and wait for Magix Movie Edit Pro to complete the export.

A better way of removing Audio From Video

Removing audio files from videos in Magix Movie Edit Pro is easy, but if you are looking for a video editing software that provides more powerful audio editing options consider using Filmora. Wondershare Filmora is equipped with many advanced video editing options that will enable you to create perfect soundtracks for your videos. Editing audio files with Filmora is easy because you can perform all the essential editing tasks with just a few simple clicks. The program supports a large number of audio file formats and even enables you to narrate your videos, and add the files you recorded to your project effortlessly.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Apr 30, 2024• Proven solutions

A poorly recorded audio can ruin a perfectly captured video, but luckily all video editing programs allow you to remove audio files you don’t want to use from your project. If you recorded the audio from your Smartphone or a camera that doesn’t feature a professional microphone, chances are that the audio in that video clip will not be used in the project you are working on.

We will show you how you can remove audio files from a video in Magix Edit Pro in only a several simple steps that take a minimum amount of effort and time.

Removing Audio from Video in Magix Movie Edit Pro

During the editing process original audio files are often separated from the video files because video editors can manipulate video files better and the audio files are replaced by the sound recordings of better quality.

1. Place the video clips onto the timeline

The first step in the process of removing audio from the video will require you to place the video clip onto the timeline. You can do so by clicking on the ‘Import’ tab and dragging the file to the timeline from the folder in which the video clip is stored. After you’ve positioned the video file onto the video track in the Magix Movie Edit Pro you will notice that the audio file isn’t displayed, which means that audio and video tracks are linked together and that all the changes you make on the video file will also apply to the audio file.

2.Separate the audio and the video

In order to avoid changing the speed of the audio file when you are trying to alter the playback speed of the video file, you need to separate the two files. You can do this easily, by selecting the video clip on the timeline and clicking the ‘Ungroup’ icon located on the editor’s toolbar. Upon clicking the ‘Ungroup’ icon you will be able to see the audio file on the track directly below the video track.

If you would like to remove an entire file, select it and then right-click on it. From the menu that emerges select the ‘Delete objects’ option or just hit the ‘Delete’ button on your keyboard. However, if you would like to use parts of the original file utilize the ‘Split objects’ tool to separate the parts of the audio file you want to use, from the ones you don’t need. Then after cutting all the parts of the file, you don’t want to use, delete them by using one of the two methods we described.

In order to reach a high level of precision, click on the ‘Zoom current object’ icon that is located in the lower right corner of the editor. Choosing to zoom in on the audio file you are working on will enable you to have a better control over it and apply all the changes and audio effects with a higher level of precision.

3.Export the project as an audio file

After you made all the changes you wanted and removed all the parts of audio files you didn’t want to feature in your video you can export only an audio file.

Select the audio files you want to export on the editor’s audio track and click on ‘File/Movie export’. From the ‘Movie export’ menu, select one of following options ‘Audio as MP3’ or ‘Audio as WAV’, depending on the output format you wish to use. Adjust the export settings and wait for Magix Movie Edit Pro to complete the export.

A better way of removing Audio From Video

Removing audio files from videos in Magix Movie Edit Pro is easy, but if you are looking for a video editing software that provides more powerful audio editing options consider using Filmora. Wondershare Filmora is equipped with many advanced video editing options that will enable you to create perfect soundtracks for your videos. Editing audio files with Filmora is easy because you can perform all the essential editing tasks with just a few simple clicks. The program supports a large number of audio file formats and even enables you to narrate your videos, and add the files you recorded to your project effortlessly.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Apr 30, 2024• Proven solutions

A poorly recorded audio can ruin a perfectly captured video, but luckily all video editing programs allow you to remove audio files you don’t want to use from your project. If you recorded the audio from your Smartphone or a camera that doesn’t feature a professional microphone, chances are that the audio in that video clip will not be used in the project you are working on.

We will show you how you can remove audio files from a video in Magix Edit Pro in only a several simple steps that take a minimum amount of effort and time.

Removing Audio from Video in Magix Movie Edit Pro

During the editing process original audio files are often separated from the video files because video editors can manipulate video files better and the audio files are replaced by the sound recordings of better quality.

1. Place the video clips onto the timeline

The first step in the process of removing audio from the video will require you to place the video clip onto the timeline. You can do so by clicking on the ‘Import’ tab and dragging the file to the timeline from the folder in which the video clip is stored. After you’ve positioned the video file onto the video track in the Magix Movie Edit Pro you will notice that the audio file isn’t displayed, which means that audio and video tracks are linked together and that all the changes you make on the video file will also apply to the audio file.

2.Separate the audio and the video

In order to avoid changing the speed of the audio file when you are trying to alter the playback speed of the video file, you need to separate the two files. You can do this easily, by selecting the video clip on the timeline and clicking the ‘Ungroup’ icon located on the editor’s toolbar. Upon clicking the ‘Ungroup’ icon you will be able to see the audio file on the track directly below the video track.

If you would like to remove an entire file, select it and then right-click on it. From the menu that emerges select the ‘Delete objects’ option or just hit the ‘Delete’ button on your keyboard. However, if you would like to use parts of the original file utilize the ‘Split objects’ tool to separate the parts of the audio file you want to use, from the ones you don’t need. Then after cutting all the parts of the file, you don’t want to use, delete them by using one of the two methods we described.

In order to reach a high level of precision, click on the ‘Zoom current object’ icon that is located in the lower right corner of the editor. Choosing to zoom in on the audio file you are working on will enable you to have a better control over it and apply all the changes and audio effects with a higher level of precision.

3.Export the project as an audio file

After you made all the changes you wanted and removed all the parts of audio files you didn’t want to feature in your video you can export only an audio file.

Select the audio files you want to export on the editor’s audio track and click on ‘File/Movie export’. From the ‘Movie export’ menu, select one of following options ‘Audio as MP3’ or ‘Audio as WAV’, depending on the output format you wish to use. Adjust the export settings and wait for Magix Movie Edit Pro to complete the export.

A better way of removing Audio From Video

Removing audio files from videos in Magix Movie Edit Pro is easy, but if you are looking for a video editing software that provides more powerful audio editing options consider using Filmora. Wondershare Filmora is equipped with many advanced video editing options that will enable you to create perfect soundtracks for your videos. Editing audio files with Filmora is easy because you can perform all the essential editing tasks with just a few simple clicks. The program supports a large number of audio file formats and even enables you to narrate your videos, and add the files you recorded to your project effortlessly.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Apr 30, 2024• Proven solutions

A poorly recorded audio can ruin a perfectly captured video, but luckily all video editing programs allow you to remove audio files you don’t want to use from your project. If you recorded the audio from your Smartphone or a camera that doesn’t feature a professional microphone, chances are that the audio in that video clip will not be used in the project you are working on.

We will show you how you can remove audio files from a video in Magix Edit Pro in only a several simple steps that take a minimum amount of effort and time.

Removing Audio from Video in Magix Movie Edit Pro

During the editing process original audio files are often separated from the video files because video editors can manipulate video files better and the audio files are replaced by the sound recordings of better quality.

1. Place the video clips onto the timeline

The first step in the process of removing audio from the video will require you to place the video clip onto the timeline. You can do so by clicking on the ‘Import’ tab and dragging the file to the timeline from the folder in which the video clip is stored. After you’ve positioned the video file onto the video track in the Magix Movie Edit Pro you will notice that the audio file isn’t displayed, which means that audio and video tracks are linked together and that all the changes you make on the video file will also apply to the audio file.

2.Separate the audio and the video

In order to avoid changing the speed of the audio file when you are trying to alter the playback speed of the video file, you need to separate the two files. You can do this easily, by selecting the video clip on the timeline and clicking the ‘Ungroup’ icon located on the editor’s toolbar. Upon clicking the ‘Ungroup’ icon you will be able to see the audio file on the track directly below the video track.

If you would like to remove an entire file, select it and then right-click on it. From the menu that emerges select the ‘Delete objects’ option or just hit the ‘Delete’ button on your keyboard. However, if you would like to use parts of the original file utilize the ‘Split objects’ tool to separate the parts of the audio file you want to use, from the ones you don’t need. Then after cutting all the parts of the file, you don’t want to use, delete them by using one of the two methods we described.

In order to reach a high level of precision, click on the ‘Zoom current object’ icon that is located in the lower right corner of the editor. Choosing to zoom in on the audio file you are working on will enable you to have a better control over it and apply all the changes and audio effects with a higher level of precision.

3.Export the project as an audio file

After you made all the changes you wanted and removed all the parts of audio files you didn’t want to feature in your video you can export only an audio file.

Select the audio files you want to export on the editor’s audio track and click on ‘File/Movie export’. From the ‘Movie export’ menu, select one of following options ‘Audio as MP3’ or ‘Audio as WAV’, depending on the output format you wish to use. Adjust the export settings and wait for Magix Movie Edit Pro to complete the export.

A better way of removing Audio From Video

Removing audio files from videos in Magix Movie Edit Pro is easy, but if you are looking for a video editing software that provides more powerful audio editing options consider using Filmora. Wondershare Filmora is equipped with many advanced video editing options that will enable you to create perfect soundtracks for your videos. Editing audio files with Filmora is easy because you can perform all the essential editing tasks with just a few simple clicks. The program supports a large number of audio file formats and even enables you to narrate your videos, and add the files you recorded to your project effortlessly.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: