Achieving Balanced Sound with VLC: An In-Depth Look at Volume Normalization

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Must-Have Specifications in Mac Audio Editing Applications

What to Look for in Audio Editor Software for Mac OS X

Shanoon Cox

Mar 27, 2024• Proven solutions

The Mac offers the perfect computer platform for innumerable editing software when it comes to editing audio files. You can find plenty of audio editor for Mac choices that range from the free to very expensive, and each has its unique advantages.

However, before you start searching for the right music editing software for your Mac, you’ll need to know what you want, what to look for and what current audio editing software is the best for your needs.

• Part1. Common Demands on Audio Editing Software
• Part2. What to Look for in Audio Editing Software
• Part3. Three Audio Editor Software Mac Selections

Part 1. Common Demands on Audio Editing Software

Those who regularly use this audio edit software can be divided into two categories: commercial and consumer.

For most commercial-based needs, you’ll want the best in professional audio editor Mac software that meets the needs of your studio system. The software needed will generally be expensive and geared to handling large, professional projects that require many different tracks.

However, it is fair to say that plenty of sound engineers use cheap or even free audio editing software to accomplish certain tasks quickly.

For the consumer, most audio editing needs are based on loading and doing basic editing on tracks. Whether you run your band, private studio, or one-person podcast, most of the demands that consumers put on their editing software is pretty straightforward;

• Record Tracks
• Basic Editing: Cutting, Deleting, and Inserting
• Adding Sound Effects

Given that most consumer projects demand the limited amount of time available, it is not surprising that most people want an audio editor Mac system to be simple, straightforward, and easy to use. This means that most of the work is simply recording or adding new tracks, making basic edits, and putting in certain sound effects, which often augments or changes the vocal track.

Part2. What to Look for in Audio Editing Software

For consumers looking to obtain the right audio editor for their Mac, several considerations need to be taken into account, starting with their particular demands.

• Simple or Full Featured: In essence, do you need a full-featured editing software similar to what professionals use, or do you just need something that can record, edit, and then share clean audio? For example, if you are running a podcast, then the software itself can be quite simple in its features. formats.
• Compatibility: You’ll want the software to be compatible with the format you are recording or obtaining the tracks. For the most part, audio editing software is quite adaptable, but certain types of tracks may not be compatible. So, check it out before you make your choice.
• Sharing Capacity: The editing software must output in a format that can be shared easily. So, you will want to look for systems compatible with what you are using.

Part3. Three Audio Editor Software Mac Selections

What follows are three audio editing software solutions for the Mac which are relatively inexpensive but meet the needs of most consumer and small business operations.

Wondershare Filmora Audio Editor for Mac:

Filmora supports a vast range of audio formats, covering AC3, AIF, AIFF, APE, AU, FLAC, M4A, MKA, MP2, MP3, OGG, WAV, WMA, etc.

With a built-in recorder, you can directly record voice over from your microphone. Basic editing features such as splitting, merging, changing speed, editing pitch, changing voice, etc are available. The multi-audio track allows you to add up to 3 audio tracks at a time so that you can easily add sound effects, voice-over, or background music to your audio file.

Though a full-featured audio editor, Filmora is more like a multimedia toolbox that allows you to edit videos, audios, and photos. The modern and intuitive interface will involve the least learning curve you could ever imagine and thus, it is renowned as the best video and audio editor Mac software for beginner users. Download a free copy to try it out below:

Audio Editor: Audacity (Free)

This editor handles uncompressed audio and supports many files, including AIFF, .WAV, MP2/3.FLAC and .OGG. You can record from different inputs, employ the JACK Audio feature, monitor the volume, and add several different effects.

The good news is that this editing software is simple, straightforward, and will work for many consumers who create their own broadcasts. However, it is rather limited when recording audio from your computer itself, and you’ll need to add SoundFlower to accomplish that.

Audio Editor:WavePad ($50)

This is one of the more celebrated audio editing software systems for Mac computers. It contains many tools and sound effects and supports a considerable number of file types. The main attribute may be how user-friendly the wavepad sound editor is and the number of different features.

The only substantial negative is that the floating toolbars used will get in the way when you are working on larger projects. However, a big positive is that this editing system can clean up old, hissy audio quite well, substantially improving your recordings.

Audio Editor: Sound Forge Pro Mac 2 ($99)

Sound Forge is an almost legendary audio editing system used by professionals and now priced for consumers. Sound for those who want the ultimate file compatibility, features, and overall quality, Sound Forge sets the standards. The 2.0 version is perfect for sound design projects as many different audio files can be used.

The only real negative is the price itself which will push it beyond the needs of many consumers looking for a simple, straightforward audio editor Mac system. However, if you plan on growing your current projects into something more professional and expansive, then the relatively low price of the Sound Forge Pro Mac 2 should be considered.

Finding the best audio editor Mac software should start with their own particular needs and then find the product that allows them to accomplish their goals.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

The Mac offers the perfect computer platform for innumerable editing software when it comes to editing audio files. You can find plenty of audio editor for Mac choices that range from the free to very expensive, and each has its unique advantages.

However, before you start searching for the right music editing software for your Mac, you’ll need to know what you want, what to look for and what current audio editing software is the best for your needs.

• Part1. Common Demands on Audio Editing Software
• Part2. What to Look for in Audio Editing Software
• Part3. Three Audio Editor Software Mac Selections

Part 1. Common Demands on Audio Editing Software

Those who regularly use this audio edit software can be divided into two categories: commercial and consumer.

For most commercial-based needs, you’ll want the best in professional audio editor Mac software that meets the needs of your studio system. The software needed will generally be expensive and geared to handling large, professional projects that require many different tracks.

However, it is fair to say that plenty of sound engineers use cheap or even free audio editing software to accomplish certain tasks quickly.

For the consumer, most audio editing needs are based on loading and doing basic editing on tracks. Whether you run your band, private studio, or one-person podcast, most of the demands that consumers put on their editing software is pretty straightforward;

• Record Tracks
• Basic Editing: Cutting, Deleting, and Inserting
• Adding Sound Effects

Given that most consumer projects demand the limited amount of time available, it is not surprising that most people want an audio editor Mac system to be simple, straightforward, and easy to use. This means that most of the work is simply recording or adding new tracks, making basic edits, and putting in certain sound effects, which often augments or changes the vocal track.

Part2. What to Look for in Audio Editing Software

For consumers looking to obtain the right audio editor for their Mac, several considerations need to be taken into account, starting with their particular demands.

• Simple or Full Featured: In essence, do you need a full-featured editing software similar to what professionals use, or do you just need something that can record, edit, and then share clean audio? For example, if you are running a podcast, then the software itself can be quite simple in its features. formats.
• Compatibility: You’ll want the software to be compatible with the format you are recording or obtaining the tracks. For the most part, audio editing software is quite adaptable, but certain types of tracks may not be compatible. So, check it out before you make your choice.
• Sharing Capacity: The editing software must output in a format that can be shared easily. So, you will want to look for systems compatible with what you are using.

Part3. Three Audio Editor Software Mac Selections

What follows are three audio editing software solutions for the Mac which are relatively inexpensive but meet the needs of most consumer and small business operations.

Wondershare Filmora Audio Editor for Mac:

Filmora supports a vast range of audio formats, covering AC3, AIF, AIFF, APE, AU, FLAC, M4A, MKA, MP2, MP3, OGG, WAV, WMA, etc.

With a built-in recorder, you can directly record voice over from your microphone. Basic editing features such as splitting, merging, changing speed, editing pitch, changing voice, etc are available. The multi-audio track allows you to add up to 3 audio tracks at a time so that you can easily add sound effects, voice-over, or background music to your audio file.

Though a full-featured audio editor, Filmora is more like a multimedia toolbox that allows you to edit videos, audios, and photos. The modern and intuitive interface will involve the least learning curve you could ever imagine and thus, it is renowned as the best video and audio editor Mac software for beginner users. Download a free copy to try it out below:

Audio Editor: Audacity (Free)

This editor handles uncompressed audio and supports many files, including AIFF, .WAV, MP2/3.FLAC and .OGG. You can record from different inputs, employ the JACK Audio feature, monitor the volume, and add several different effects.

The good news is that this editing software is simple, straightforward, and will work for many consumers who create their own broadcasts. However, it is rather limited when recording audio from your computer itself, and you’ll need to add SoundFlower to accomplish that.

Audio Editor:WavePad ($50)

This is one of the more celebrated audio editing software systems for Mac computers. It contains many tools and sound effects and supports a considerable number of file types. The main attribute may be how user-friendly the wavepad sound editor is and the number of different features.

The only substantial negative is that the floating toolbars used will get in the way when you are working on larger projects. However, a big positive is that this editing system can clean up old, hissy audio quite well, substantially improving your recordings.

Audio Editor: Sound Forge Pro Mac 2 ($99)

Sound Forge is an almost legendary audio editing system used by professionals and now priced for consumers. Sound for those who want the ultimate file compatibility, features, and overall quality, Sound Forge sets the standards. The 2.0 version is perfect for sound design projects as many different audio files can be used.

The only real negative is the price itself which will push it beyond the needs of many consumers looking for a simple, straightforward audio editor Mac system. However, if you plan on growing your current projects into something more professional and expansive, then the relatively low price of the Sound Forge Pro Mac 2 should be considered.

Finding the best audio editor Mac software should start with their own particular needs and then find the product that allows them to accomplish their goals.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

The Mac offers the perfect computer platform for innumerable editing software when it comes to editing audio files. You can find plenty of audio editor for Mac choices that range from the free to very expensive, and each has its unique advantages.

However, before you start searching for the right music editing software for your Mac, you’ll need to know what you want, what to look for and what current audio editing software is the best for your needs.

• Part1. Common Demands on Audio Editing Software
• Part2. What to Look for in Audio Editing Software
• Part3. Three Audio Editor Software Mac Selections

Part 1. Common Demands on Audio Editing Software

Those who regularly use this audio edit software can be divided into two categories: commercial and consumer.

For most commercial-based needs, you’ll want the best in professional audio editor Mac software that meets the needs of your studio system. The software needed will generally be expensive and geared to handling large, professional projects that require many different tracks.

However, it is fair to say that plenty of sound engineers use cheap or even free audio editing software to accomplish certain tasks quickly.

For the consumer, most audio editing needs are based on loading and doing basic editing on tracks. Whether you run your band, private studio, or one-person podcast, most of the demands that consumers put on their editing software is pretty straightforward;

• Record Tracks
• Basic Editing: Cutting, Deleting, and Inserting
• Adding Sound Effects

Given that most consumer projects demand the limited amount of time available, it is not surprising that most people want an audio editor Mac system to be simple, straightforward, and easy to use. This means that most of the work is simply recording or adding new tracks, making basic edits, and putting in certain sound effects, which often augments or changes the vocal track.

Part2. What to Look for in Audio Editing Software

For consumers looking to obtain the right audio editor for their Mac, several considerations need to be taken into account, starting with their particular demands.

• Simple or Full Featured: In essence, do you need a full-featured editing software similar to what professionals use, or do you just need something that can record, edit, and then share clean audio? For example, if you are running a podcast, then the software itself can be quite simple in its features. formats.
• Compatibility: You’ll want the software to be compatible with the format you are recording or obtaining the tracks. For the most part, audio editing software is quite adaptable, but certain types of tracks may not be compatible. So, check it out before you make your choice.
• Sharing Capacity: The editing software must output in a format that can be shared easily. So, you will want to look for systems compatible with what you are using.

Part3. Three Audio Editor Software Mac Selections

What follows are three audio editing software solutions for the Mac which are relatively inexpensive but meet the needs of most consumer and small business operations.

Wondershare Filmora Audio Editor for Mac:

Filmora supports a vast range of audio formats, covering AC3, AIF, AIFF, APE, AU, FLAC, M4A, MKA, MP2, MP3, OGG, WAV, WMA, etc.

With a built-in recorder, you can directly record voice over from your microphone. Basic editing features such as splitting, merging, changing speed, editing pitch, changing voice, etc are available. The multi-audio track allows you to add up to 3 audio tracks at a time so that you can easily add sound effects, voice-over, or background music to your audio file.

Though a full-featured audio editor, Filmora is more like a multimedia toolbox that allows you to edit videos, audios, and photos. The modern and intuitive interface will involve the least learning curve you could ever imagine and thus, it is renowned as the best video and audio editor Mac software for beginner users. Download a free copy to try it out below:

Audio Editor: Audacity (Free)

This editor handles uncompressed audio and supports many files, including AIFF, .WAV, MP2/3.FLAC and .OGG. You can record from different inputs, employ the JACK Audio feature, monitor the volume, and add several different effects.

The good news is that this editing software is simple, straightforward, and will work for many consumers who create their own broadcasts. However, it is rather limited when recording audio from your computer itself, and you’ll need to add SoundFlower to accomplish that.

Audio Editor:WavePad ($50)

This is one of the more celebrated audio editing software systems for Mac computers. It contains many tools and sound effects and supports a considerable number of file types. The main attribute may be how user-friendly the wavepad sound editor is and the number of different features.

The only substantial negative is that the floating toolbars used will get in the way when you are working on larger projects. However, a big positive is that this editing system can clean up old, hissy audio quite well, substantially improving your recordings.

Audio Editor: Sound Forge Pro Mac 2 ($99)

Sound Forge is an almost legendary audio editing system used by professionals and now priced for consumers. Sound for those who want the ultimate file compatibility, features, and overall quality, Sound Forge sets the standards. The 2.0 version is perfect for sound design projects as many different audio files can be used.

The only real negative is the price itself which will push it beyond the needs of many consumers looking for a simple, straightforward audio editor Mac system. However, if you plan on growing your current projects into something more professional and expansive, then the relatively low price of the Sound Forge Pro Mac 2 should be considered.

Finding the best audio editor Mac software should start with their own particular needs and then find the product that allows them to accomplish their goals.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

The Mac offers the perfect computer platform for innumerable editing software when it comes to editing audio files. You can find plenty of audio editor for Mac choices that range from the free to very expensive, and each has its unique advantages.

However, before you start searching for the right music editing software for your Mac, you’ll need to know what you want, what to look for and what current audio editing software is the best for your needs.

• Part1. Common Demands on Audio Editing Software
• Part2. What to Look for in Audio Editing Software
• Part3. Three Audio Editor Software Mac Selections

Part 1. Common Demands on Audio Editing Software

Those who regularly use this audio edit software can be divided into two categories: commercial and consumer.

For most commercial-based needs, you’ll want the best in professional audio editor Mac software that meets the needs of your studio system. The software needed will generally be expensive and geared to handling large, professional projects that require many different tracks.

However, it is fair to say that plenty of sound engineers use cheap or even free audio editing software to accomplish certain tasks quickly.

For the consumer, most audio editing needs are based on loading and doing basic editing on tracks. Whether you run your band, private studio, or one-person podcast, most of the demands that consumers put on their editing software is pretty straightforward;

• Record Tracks
• Basic Editing: Cutting, Deleting, and Inserting
• Adding Sound Effects

Given that most consumer projects demand the limited amount of time available, it is not surprising that most people want an audio editor Mac system to be simple, straightforward, and easy to use. This means that most of the work is simply recording or adding new tracks, making basic edits, and putting in certain sound effects, which often augments or changes the vocal track.

Part2. What to Look for in Audio Editing Software

For consumers looking to obtain the right audio editor for their Mac, several considerations need to be taken into account, starting with their particular demands.

• Simple or Full Featured: In essence, do you need a full-featured editing software similar to what professionals use, or do you just need something that can record, edit, and then share clean audio? For example, if you are running a podcast, then the software itself can be quite simple in its features. formats.
• Compatibility: You’ll want the software to be compatible with the format you are recording or obtaining the tracks. For the most part, audio editing software is quite adaptable, but certain types of tracks may not be compatible. So, check it out before you make your choice.
• Sharing Capacity: The editing software must output in a format that can be shared easily. So, you will want to look for systems compatible with what you are using.

Part3. Three Audio Editor Software Mac Selections

What follows are three audio editing software solutions for the Mac which are relatively inexpensive but meet the needs of most consumer and small business operations.

Wondershare Filmora Audio Editor for Mac:

Filmora supports a vast range of audio formats, covering AC3, AIF, AIFF, APE, AU, FLAC, M4A, MKA, MP2, MP3, OGG, WAV, WMA, etc.

With a built-in recorder, you can directly record voice over from your microphone. Basic editing features such as splitting, merging, changing speed, editing pitch, changing voice, etc are available. The multi-audio track allows you to add up to 3 audio tracks at a time so that you can easily add sound effects, voice-over, or background music to your audio file.

Though a full-featured audio editor, Filmora is more like a multimedia toolbox that allows you to edit videos, audios, and photos. The modern and intuitive interface will involve the least learning curve you could ever imagine and thus, it is renowned as the best video and audio editor Mac software for beginner users. Download a free copy to try it out below:

Audio Editor: Audacity (Free)

This editor handles uncompressed audio and supports many files, including AIFF, .WAV, MP2/3.FLAC and .OGG. You can record from different inputs, employ the JACK Audio feature, monitor the volume, and add several different effects.

The good news is that this editing software is simple, straightforward, and will work for many consumers who create their own broadcasts. However, it is rather limited when recording audio from your computer itself, and you’ll need to add SoundFlower to accomplish that.

Audio Editor:WavePad ($50)

This is one of the more celebrated audio editing software systems for Mac computers. It contains many tools and sound effects and supports a considerable number of file types. The main attribute may be how user-friendly the wavepad sound editor is and the number of different features.

The only substantial negative is that the floating toolbars used will get in the way when you are working on larger projects. However, a big positive is that this editing system can clean up old, hissy audio quite well, substantially improving your recordings.

Audio Editor: Sound Forge Pro Mac 2 ($99)

Sound Forge is an almost legendary audio editing system used by professionals and now priced for consumers. Sound for those who want the ultimate file compatibility, features, and overall quality, Sound Forge sets the standards. The 2.0 version is perfect for sound design projects as many different audio files can be used.

The only real negative is the price itself which will push it beyond the needs of many consumers looking for a simple, straightforward audio editor Mac system. However, if you plan on growing your current projects into something more professional and expansive, then the relatively low price of the Sound Forge Pro Mac 2 should be considered.

Finding the best audio editor Mac software should start with their own particular needs and then find the product that allows them to accomplish their goals.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

“Transcribing Speech to MP3 Audio Format for Diverse Platforms”

Convert Text to MP3 on Windows, Mac, Android and iPhone

Shanoon Cox

Mar 27, 2024• Proven solutions

Wondering why you need to convert text to MP3 audio files? Well, the possibilities and reasons are endless. Whether you want to cover up endless lecture notes or prepare a vital speech, or perhaps you just want to avoid reading eye-straining tiny fonts, converting any written text to mp3 online comes in handy in so many ways. Not to mention, narration and the use of natural human voice can do wonders for your eLearning experience. And that is what text to mp3 converters are perfect for.

Without paying a professional, you or virtually anyone out there can produce professional voice-overs with an efficient text to audio converter. In this article, we have rounded up some of the best tools for Mac, Windows, Android, and iOS users, with quick tutorials to convert your text to mp3 files.

So, let’s check them out!

• Part 1: Text to MP3 Online on PC (Windows and Mac)
• Part 2: Text to MP3 on Android
• Part 3: Text to MP3 on iOS

Part 1: Text to MP3 Online on PC (Windows and Mac)

If you are looking for a text to mp3 online converter to use on your PC, FreeTTS is your best bet. This handy online tool helps you convert countless lines of text to mp3 audio files on Windows and Mac. The free software is powered by Google machine learning and text-to-speech capability, which converts text to audio faster than ever. With FreeTTS, just copy and paste your text content, wait for a few seconds, and get high-quality audio files without any subscription or registration.

To inspire you, here is a quick step-by-step tutorial on how you can turn long texts into professional audio files with natural voices using the online FreeTTS converter.

1. Launch FreeTTS on your Windows or Mac

Start by launching the online FreeTTS software on your Windows or Mac browser.

2. Copy and paste your words

On the main interface, copy and paste your text into the text box.

3. Convert text to mp3

After pasting your words in the text box, select your required Language and Voice style from the dropdown. Then hit Convert to start the process. Once the audio file is ready, you can save it to your PC by clicking on Download audio.

Part 2: Text to MP3 on Android

Narrator’s voice is an excellent text-to-speech converter app available on the Google Play Store. The app allows you to convert text to mp3 and mp4 files and share the converted files with your friends on various social platforms. With a wide range of language options and amusing voice styles, your phone will read out what you type in funny or serious tones using the Narrator’s voice app.

The output is an expressive and natural-sounding narration of your written content that you can export as audio or video files to engage the audience. Moreover, using this powerful app is pretty easy to turn text to mp3. Just follow these steps, and your voice-over will be ready.

1. Download and install the Narrator’s Voice app

To get started, download and install the Narrator’s voice app on your phone, then open it to enter the main screen.

2. Read aloud or type your content in the text box

On the Create tab, type the content that you wish to convert to an audio file. Or you can also choose to read aloud and record your words by clicking on the voice to text option.

3. Customize your language and voice style

Next, tap on the icon with the letter A located on the bottom left corner of the main interface to customize your audio. Then select your preferred Language, Voice, and Effect and hit Back to return.

4. Convert text to mp3

After all the edits are completed, click on the Play icon to start the conversion process.

5. Save or share the converted audio

Finally, tap on the Export icon and select Save to download the mp3 file on your phone or choose Share audio.

Part 3: Text to MP3 on iOS

The easiest way to turn large amounts of text to mp3 on an iPhone is the Text to Speech-Recorder app. The essence of this user-friendly app is the multi-lingual speech service that brings your text to life with multiple natural sounding voices. A standout feature of the app is background music support for the mp3 file. All you have to do is type your words or record your voice, explore the worldwide language library, add background music of your choice, and play to convert text to mp3.

All in all, Text to Speech-Recorder is one of the most customizable text to audio apps for iPhone users. In only five quick steps, you can transform your words into high-quality audio using this convenient app.

1. Open the Text to Speech-Recorder app

First, download the Text to Speech-Recorder app from the App store. Then open the app once it is installed.

2. Input text or record voice

Next, choose text to mp3 to manually type your content or select Record to mp3 if you wish to record your voice.

3. Edit your language, voice, and background music settings

To edit language and voice settings, click the Face icon to enter the Anchor tab. Here you can preview and choose a language and voice style of your choice. Then, tap the music icon and choose from the free background music options or hit No music if you don’t want to add any music.

4. Convert text to speech

Once you have selected the language, voice, and music, click on Save to save it to the My Audio list.

5. Download the audio file

To download the converted file to your device, hit Export.

Conclusion

Now that you know some of the best text to mp3 converters, you can cut costs of hiring a professional voice-over artist, better memorize your lectures, and even have your phone read your favorite eBook for you.

All the apps in our list are top-notch and easy-to-use text-to-speech converters with user-friendly interfaces and customizable settings. These handy tools will read aloud anything you type in amusing narration styles to create an unforgettable eLearning experience. Whether you are an Apple fan or an Android user, there is something for everyone.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Wondering why you need to convert text to MP3 audio files? Well, the possibilities and reasons are endless. Whether you want to cover up endless lecture notes or prepare a vital speech, or perhaps you just want to avoid reading eye-straining tiny fonts, converting any written text to mp3 online comes in handy in so many ways. Not to mention, narration and the use of natural human voice can do wonders for your eLearning experience. And that is what text to mp3 converters are perfect for.

Without paying a professional, you or virtually anyone out there can produce professional voice-overs with an efficient text to audio converter. In this article, we have rounded up some of the best tools for Mac, Windows, Android, and iOS users, with quick tutorials to convert your text to mp3 files.

So, let’s check them out!

• Part 1: Text to MP3 Online on PC (Windows and Mac)
• Part 2: Text to MP3 on Android
• Part 3: Text to MP3 on iOS

Part 1: Text to MP3 Online on PC (Windows and Mac)

If you are looking for a text to mp3 online converter to use on your PC, FreeTTS is your best bet. This handy online tool helps you convert countless lines of text to mp3 audio files on Windows and Mac. The free software is powered by Google machine learning and text-to-speech capability, which converts text to audio faster than ever. With FreeTTS, just copy and paste your text content, wait for a few seconds, and get high-quality audio files without any subscription or registration.

To inspire you, here is a quick step-by-step tutorial on how you can turn long texts into professional audio files with natural voices using the online FreeTTS converter.

1. Launch FreeTTS on your Windows or Mac

Start by launching the online FreeTTS software on your Windows or Mac browser.

2. Copy and paste your words

On the main interface, copy and paste your text into the text box.

3. Convert text to mp3

After pasting your words in the text box, select your required Language and Voice style from the dropdown. Then hit Convert to start the process. Once the audio file is ready, you can save it to your PC by clicking on Download audio.

Part 2: Text to MP3 on Android

Narrator’s voice is an excellent text-to-speech converter app available on the Google Play Store. The app allows you to convert text to mp3 and mp4 files and share the converted files with your friends on various social platforms. With a wide range of language options and amusing voice styles, your phone will read out what you type in funny or serious tones using the Narrator’s voice app.

The output is an expressive and natural-sounding narration of your written content that you can export as audio or video files to engage the audience. Moreover, using this powerful app is pretty easy to turn text to mp3. Just follow these steps, and your voice-over will be ready.

1. Download and install the Narrator’s Voice app

To get started, download and install the Narrator’s voice app on your phone, then open it to enter the main screen.

2. Read aloud or type your content in the text box

On the Create tab, type the content that you wish to convert to an audio file. Or you can also choose to read aloud and record your words by clicking on the voice to text option.

3. Customize your language and voice style

Next, tap on the icon with the letter A located on the bottom left corner of the main interface to customize your audio. Then select your preferred Language, Voice, and Effect and hit Back to return.

4. Convert text to mp3

After all the edits are completed, click on the Play icon to start the conversion process.

5. Save or share the converted audio

Finally, tap on the Export icon and select Save to download the mp3 file on your phone or choose Share audio.

Part 3: Text to MP3 on iOS

The easiest way to turn large amounts of text to mp3 on an iPhone is the Text to Speech-Recorder app. The essence of this user-friendly app is the multi-lingual speech service that brings your text to life with multiple natural sounding voices. A standout feature of the app is background music support for the mp3 file. All you have to do is type your words or record your voice, explore the worldwide language library, add background music of your choice, and play to convert text to mp3.

All in all, Text to Speech-Recorder is one of the most customizable text to audio apps for iPhone users. In only five quick steps, you can transform your words into high-quality audio using this convenient app.

1. Open the Text to Speech-Recorder app

First, download the Text to Speech-Recorder app from the App store. Then open the app once it is installed.

2. Input text or record voice

Next, choose text to mp3 to manually type your content or select Record to mp3 if you wish to record your voice.

3. Edit your language, voice, and background music settings

To edit language and voice settings, click the Face icon to enter the Anchor tab. Here you can preview and choose a language and voice style of your choice. Then, tap the music icon and choose from the free background music options or hit No music if you don’t want to add any music.

4. Convert text to speech

Once you have selected the language, voice, and music, click on Save to save it to the My Audio list.

5. Download the audio file

To download the converted file to your device, hit Export.

Conclusion

Now that you know some of the best text to mp3 converters, you can cut costs of hiring a professional voice-over artist, better memorize your lectures, and even have your phone read your favorite eBook for you.

All the apps in our list are top-notch and easy-to-use text-to-speech converters with user-friendly interfaces and customizable settings. These handy tools will read aloud anything you type in amusing narration styles to create an unforgettable eLearning experience. Whether you are an Apple fan or an Android user, there is something for everyone.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Wondering why you need to convert text to MP3 audio files? Well, the possibilities and reasons are endless. Whether you want to cover up endless lecture notes or prepare a vital speech, or perhaps you just want to avoid reading eye-straining tiny fonts, converting any written text to mp3 online comes in handy in so many ways. Not to mention, narration and the use of natural human voice can do wonders for your eLearning experience. And that is what text to mp3 converters are perfect for.

Without paying a professional, you or virtually anyone out there can produce professional voice-overs with an efficient text to audio converter. In this article, we have rounded up some of the best tools for Mac, Windows, Android, and iOS users, with quick tutorials to convert your text to mp3 files.

So, let’s check them out!

• Part 1: Text to MP3 Online on PC (Windows and Mac)
• Part 2: Text to MP3 on Android
• Part 3: Text to MP3 on iOS

Part 1: Text to MP3 Online on PC (Windows and Mac)

If you are looking for a text to mp3 online converter to use on your PC, FreeTTS is your best bet. This handy online tool helps you convert countless lines of text to mp3 audio files on Windows and Mac. The free software is powered by Google machine learning and text-to-speech capability, which converts text to audio faster than ever. With FreeTTS, just copy and paste your text content, wait for a few seconds, and get high-quality audio files without any subscription or registration.

To inspire you, here is a quick step-by-step tutorial on how you can turn long texts into professional audio files with natural voices using the online FreeTTS converter.

1. Launch FreeTTS on your Windows or Mac

Start by launching the online FreeTTS software on your Windows or Mac browser.

2. Copy and paste your words

On the main interface, copy and paste your text into the text box.

3. Convert text to mp3

After pasting your words in the text box, select your required Language and Voice style from the dropdown. Then hit Convert to start the process. Once the audio file is ready, you can save it to your PC by clicking on Download audio.

Part 2: Text to MP3 on Android

Narrator’s voice is an excellent text-to-speech converter app available on the Google Play Store. The app allows you to convert text to mp3 and mp4 files and share the converted files with your friends on various social platforms. With a wide range of language options and amusing voice styles, your phone will read out what you type in funny or serious tones using the Narrator’s voice app.

The output is an expressive and natural-sounding narration of your written content that you can export as audio or video files to engage the audience. Moreover, using this powerful app is pretty easy to turn text to mp3. Just follow these steps, and your voice-over will be ready.

1. Download and install the Narrator’s Voice app

To get started, download and install the Narrator’s voice app on your phone, then open it to enter the main screen.

2. Read aloud or type your content in the text box

On the Create tab, type the content that you wish to convert to an audio file. Or you can also choose to read aloud and record your words by clicking on the voice to text option.

3. Customize your language and voice style

Next, tap on the icon with the letter A located on the bottom left corner of the main interface to customize your audio. Then select your preferred Language, Voice, and Effect and hit Back to return.

4. Convert text to mp3

After all the edits are completed, click on the Play icon to start the conversion process.

5. Save or share the converted audio

Finally, tap on the Export icon and select Save to download the mp3 file on your phone or choose Share audio.

Part 3: Text to MP3 on iOS

The easiest way to turn large amounts of text to mp3 on an iPhone is the Text to Speech-Recorder app. The essence of this user-friendly app is the multi-lingual speech service that brings your text to life with multiple natural sounding voices. A standout feature of the app is background music support for the mp3 file. All you have to do is type your words or record your voice, explore the worldwide language library, add background music of your choice, and play to convert text to mp3.

All in all, Text to Speech-Recorder is one of the most customizable text to audio apps for iPhone users. In only five quick steps, you can transform your words into high-quality audio using this convenient app.

1. Open the Text to Speech-Recorder app

First, download the Text to Speech-Recorder app from the App store. Then open the app once it is installed.

2. Input text or record voice

Next, choose text to mp3 to manually type your content or select Record to mp3 if you wish to record your voice.

3. Edit your language, voice, and background music settings

To edit language and voice settings, click the Face icon to enter the Anchor tab. Here you can preview and choose a language and voice style of your choice. Then, tap the music icon and choose from the free background music options or hit No music if you don’t want to add any music.

4. Convert text to speech

Once you have selected the language, voice, and music, click on Save to save it to the My Audio list.

5. Download the audio file

To download the converted file to your device, hit Export.

Conclusion

Now that you know some of the best text to mp3 converters, you can cut costs of hiring a professional voice-over artist, better memorize your lectures, and even have your phone read your favorite eBook for you.

All the apps in our list are top-notch and easy-to-use text-to-speech converters with user-friendly interfaces and customizable settings. These handy tools will read aloud anything you type in amusing narration styles to create an unforgettable eLearning experience. Whether you are an Apple fan or an Android user, there is something for everyone.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Wondering why you need to convert text to MP3 audio files? Well, the possibilities and reasons are endless. Whether you want to cover up endless lecture notes or prepare a vital speech, or perhaps you just want to avoid reading eye-straining tiny fonts, converting any written text to mp3 online comes in handy in so many ways. Not to mention, narration and the use of natural human voice can do wonders for your eLearning experience. And that is what text to mp3 converters are perfect for.

Without paying a professional, you or virtually anyone out there can produce professional voice-overs with an efficient text to audio converter. In this article, we have rounded up some of the best tools for Mac, Windows, Android, and iOS users, with quick tutorials to convert your text to mp3 files.

So, let’s check them out!

• Part 1: Text to MP3 Online on PC (Windows and Mac)
• Part 2: Text to MP3 on Android
• Part 3: Text to MP3 on iOS

Part 1: Text to MP3 Online on PC (Windows and Mac)

If you are looking for a text to mp3 online converter to use on your PC, FreeTTS is your best bet. This handy online tool helps you convert countless lines of text to mp3 audio files on Windows and Mac. The free software is powered by Google machine learning and text-to-speech capability, which converts text to audio faster than ever. With FreeTTS, just copy and paste your text content, wait for a few seconds, and get high-quality audio files without any subscription or registration.

To inspire you, here is a quick step-by-step tutorial on how you can turn long texts into professional audio files with natural voices using the online FreeTTS converter.

1. Launch FreeTTS on your Windows or Mac

Start by launching the online FreeTTS software on your Windows or Mac browser.

2. Copy and paste your words

On the main interface, copy and paste your text into the text box.

3. Convert text to mp3

After pasting your words in the text box, select your required Language and Voice style from the dropdown. Then hit Convert to start the process. Once the audio file is ready, you can save it to your PC by clicking on Download audio.

Part 2: Text to MP3 on Android

Narrator’s voice is an excellent text-to-speech converter app available on the Google Play Store. The app allows you to convert text to mp3 and mp4 files and share the converted files with your friends on various social platforms. With a wide range of language options and amusing voice styles, your phone will read out what you type in funny or serious tones using the Narrator’s voice app.

The output is an expressive and natural-sounding narration of your written content that you can export as audio or video files to engage the audience. Moreover, using this powerful app is pretty easy to turn text to mp3. Just follow these steps, and your voice-over will be ready.

1. Download and install the Narrator’s Voice app

To get started, download and install the Narrator’s voice app on your phone, then open it to enter the main screen.

2. Read aloud or type your content in the text box

On the Create tab, type the content that you wish to convert to an audio file. Or you can also choose to read aloud and record your words by clicking on the voice to text option.

3. Customize your language and voice style

Next, tap on the icon with the letter A located on the bottom left corner of the main interface to customize your audio. Then select your preferred Language, Voice, and Effect and hit Back to return.

4. Convert text to mp3

After all the edits are completed, click on the Play icon to start the conversion process.

5. Save or share the converted audio

Finally, tap on the Export icon and select Save to download the mp3 file on your phone or choose Share audio.

Part 3: Text to MP3 on iOS

The easiest way to turn large amounts of text to mp3 on an iPhone is the Text to Speech-Recorder app. The essence of this user-friendly app is the multi-lingual speech service that brings your text to life with multiple natural sounding voices. A standout feature of the app is background music support for the mp3 file. All you have to do is type your words or record your voice, explore the worldwide language library, add background music of your choice, and play to convert text to mp3.

All in all, Text to Speech-Recorder is one of the most customizable text to audio apps for iPhone users. In only five quick steps, you can transform your words into high-quality audio using this convenient app.

1. Open the Text to Speech-Recorder app

First, download the Text to Speech-Recorder app from the App store. Then open the app once it is installed.

2. Input text or record voice

Next, choose text to mp3 to manually type your content or select Record to mp3 if you wish to record your voice.

3. Edit your language, voice, and background music settings

To edit language and voice settings, click the Face icon to enter the Anchor tab. Here you can preview and choose a language and voice style of your choice. Then, tap the music icon and choose from the free background music options or hit No music if you don’t want to add any music.

4. Convert text to speech

Once you have selected the language, voice, and music, click on Save to save it to the My Audio list.

5. Download the audio file

To download the converted file to your device, hit Export.

Conclusion

Now that you know some of the best text to mp3 converters, you can cut costs of hiring a professional voice-over artist, better memorize your lectures, and even have your phone read your favorite eBook for you.

All the apps in our list are top-notch and easy-to-use text-to-speech converters with user-friendly interfaces and customizable settings. These handy tools will read aloud anything you type in amusing narration styles to create an unforgettable eLearning experience. Whether you are an Apple fan or an Android user, there is something for everyone.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: