The Power of Projection: Adjusting Your Voice Across Different Settings

Some people prefer to hide their identity by changing their voices. The fact that every person has a unique and distinct voice makes it hard for anyone to find out if you are the same or a different person. The question here is that how can you change your voice?

Various ways could be used to get this done. The article understudy will talk about different practices to change your voice, and we will also discuss voice changers with effects to change your voice. If you want to learn about changing your voice, then let’s get started!

In this article

01 What Factors Make Your Sound Unique and Special?

02 How to Change Your Voice in Practice?

03 How to Change Your Voice with Voice Changer Apps?

Part 1. What Factors Make Your Sound Unique and Special?

Naturally, a person’s voice changes with time. Although time is not only the reason, the environment also plays an essential role in changing voice. The environment has a significant effect on the way someone walks, talks, or even how someone acts on something. There are various factors upon which your voice sounds unique and special; some of these factors are briefly discussed below:

1. Gender

Females have small vocal cords as compared to males since birth. Then at puberty, the rise in the testosterone level causes the larynx to enlarge, and that changes your voice. Over time, the vocal cords thicken and tighten, which creates a vibration in sound along with deeper resonance. For females, the cords do not get tight, which results in a high pitch in the female voice.

2. Structure of Anomalies

The structure of anomalies is referred to as cleft palates deviated spectrum. Anomalies affect the clearness that is in a person’s voice. The structure of one’s voice can be altered by the age, overall health, cleanliness, and emotional state of a person. Alongside the texture of sound, pitch and timbre can also change your voice.

3. Body Structure

Bodyweight plays a vital role in changing voice. Obese men produce excessive estrogen that causes a rise in their voices. On the contrary, obese women have excessive testosterone that makes their voice deeper than others. Being obese makes the breath control better that results in generating a raspy sound.

4. Height

Underweight people have less endurance which increases the chance of injury to vocal cords. In comparison, heightened people have comparatively bigger lungs and larger lower airways, causing them to produce deeper voices compared to short people.

5. Heredity

Heredity and genetics play an important role in shaping your voice as it is a part of your anatomy too. Genetics is why you might find people from the same family have similar voices. Sound is made by the vocal cords that are in the larynx. The larynx is given a genetic code, which alters itself over time. These alterations, as a reaction, change your voice.

Part 2. How to Change Your Voice in Practice?

There are multiple reasons why someone wants to change their voice. Someone might not be satisfied with their low pitch voice or want to have a deeper voice. At the same time, you might also want to change your voice to any frictional character. Or you might want to change your voice to Morgan freeman too.

The real question is ‘Can you change your voice?’. Yes, it is possible. There are a lot of ways to do it, but they differ in complexity and effectiveness. You can either use any voice changer, or else you can also choose the natural way, which is a long-term approach. A few ways to change your voice in practice are discussed below:

Change the Way you Talk

Expressions change the emotions that affect the voice. Nasal and non-nasal voices differ as the nasal voices have a higher pitch as compared to non-nasal sounds. Changing the accent also affects the voice. The voice apparently stays the same, but the hearings of words change to make others feel the change of voice—for example, American and British accents.

Taking Care of Vocal Cords

Taking care of vocal cords can help change your voice. Smoking causes loss of voice and lowers the range of voice. Screaming can damage the vocal cords that automatically affects the voice. Breathing in polluted air not only changes the voice but also damages the vocal cords.

Vocal Exercises

There are some exercises that relax the vocal cords. These exercises include massaging the throat to loosen tense muscles, humming, taking deep breaths. Another exercise is loosening the jaw by opening it wide and closing it gently. Lip buzzing, yawning, and tongue trills are also considered exercises for vocal cords that can change your voice.

Part 3. How to Change Your Voice with Voice Changer Apps?

As we mentioned earlier that there are various ways to change your voice. Now that we have talked about some factors to sound unique and some practices to change your voice, it’s time to learn about voice changer apps. So, are you ready to learn about voice changers with effects to change your voice?

Windows & Mac Voice Changer Apps

When we talk about voice changer apps, different apps are available for Windows, and Mac. These applications provide different and unique features, making it fun to use the voice changer. Using a voice changer with effects can add different sound effects to your voice and modify it.

Moreover, voice changer apps allow you to change your voice on various gaming platforms. Not just this, but you can also have fun because some voice changers work perfectly with Zoom Meetings, Google Meet, etc. Let us share some great voice changers with you.

• AV Voice Changer
• MorphVox
• Clownfish Voice Changer
• VoiceMod

Android & iOS Voice Changer Apps

For mobile users, there is a wide range of amazing voice changers. Both Android and iOS users can enjoy the services and benefit from the voice-changing apps. You can record your voice and then add cool effects to it. Or else, you can listen and choose your favorite sound effect and then record your voice.

Do you want to know an exciting thing? Well, with these voice changers, you can prank you’re your friends and family by adding different voice effects and having fun. Let us share a few Android voice changers:

• MagicCall
• Prank Dial

What about iOS users? Don’t worry; given below are the voice changers that are best for iOS devices:

• Voice Changer Plus
• Call Voice Changer – IntCall

The Bottom Line

After reading this article, pranking your friends and speaking with a unique voice will never be a problem for you. We have discussed in detail various factors that aid in making you sound unique. Moreover, we also shared some practices that can completely change your voice.

02 How to Change Your Voice in Practice?

03 How to Change Your Voice with Voice Changer Apps?

Part 1. What Factors Make Your Sound Unique and Special?

Naturally, a person’s voice changes with time. Although time is not only the reason, the environment also plays an essential role in changing voice. The environment has a significant effect on the way someone walks, talks, or even how someone acts on something. There are various factors upon which your voice sounds unique and special; some of these factors are briefly discussed below:

1. Gender

Females have small vocal cords as compared to males since birth. Then at puberty, the rise in the testosterone level causes the larynx to enlarge, and that changes your voice. Over time, the vocal cords thicken and tighten, which creates a vibration in sound along with deeper resonance. For females, the cords do not get tight, which results in a high pitch in the female voice.

2. Structure of Anomalies

The structure of anomalies is referred to as cleft palates deviated spectrum. Anomalies affect the clearness that is in a person’s voice. The structure of one’s voice can be altered by the age, overall health, cleanliness, and emotional state of a person. Alongside the texture of sound, pitch and timbre can also change your voice.

3. Body Structure

Bodyweight plays a vital role in changing voice. Obese men produce excessive estrogen that causes a rise in their voices. On the contrary, obese women have excessive testosterone that makes their voice deeper than others. Being obese makes the breath control better that results in generating a raspy sound.

4. Height

Underweight people have less endurance which increases the chance of injury to vocal cords. In comparison, heightened people have comparatively bigger lungs and larger lower airways, causing them to produce deeper voices compared to short people.

5. Heredity

Heredity and genetics play an important role in shaping your voice as it is a part of your anatomy too. Genetics is why you might find people from the same family have similar voices. Sound is made by the vocal cords that are in the larynx. The larynx is given a genetic code, which alters itself over time. These alterations, as a reaction, change your voice.

Part 2. How to Change Your Voice in Practice?

There are multiple reasons why someone wants to change their voice. Someone might not be satisfied with their low pitch voice or want to have a deeper voice. At the same time, you might also want to change your voice to any frictional character. Or you might want to change your voice to Morgan freeman too.

The real question is ‘Can you change your voice?’. Yes, it is possible. There are a lot of ways to do it, but they differ in complexity and effectiveness. You can either use any voice changer, or else you can also choose the natural way, which is a long-term approach. A few ways to change your voice in practice are discussed below:

Change the Way you Talk

Expressions change the emotions that affect the voice. Nasal and non-nasal voices differ as the nasal voices have a higher pitch as compared to non-nasal sounds. Changing the accent also affects the voice. The voice apparently stays the same, but the hearings of words change to make others feel the change of voice—for example, American and British accents.

Taking Care of Vocal Cords

Taking care of vocal cords can help change your voice. Smoking causes loss of voice and lowers the range of voice. Screaming can damage the vocal cords that automatically affects the voice. Breathing in polluted air not only changes the voice but also damages the vocal cords.

Vocal Exercises

There are some exercises that relax the vocal cords. These exercises include massaging the throat to loosen tense muscles, humming, taking deep breaths. Another exercise is loosening the jaw by opening it wide and closing it gently. Lip buzzing, yawning, and tongue trills are also considered exercises for vocal cords that can change your voice.

Part 3. How to Change Your Voice with Voice Changer Apps?

As we mentioned earlier that there are various ways to change your voice. Now that we have talked about some factors to sound unique and some practices to change your voice, it’s time to learn about voice changer apps. So, are you ready to learn about voice changers with effects to change your voice?

Windows & Mac Voice Changer Apps

When we talk about voice changer apps, different apps are available for Windows, and Mac. These applications provide different and unique features, making it fun to use the voice changer. Using a voice changer with effects can add different sound effects to your voice and modify it.

Moreover, voice changer apps allow you to change your voice on various gaming platforms. Not just this, but you can also have fun because some voice changers work perfectly with Zoom Meetings, Google Meet, etc. Let us share some great voice changers with you.

• AV Voice Changer
• MorphVox
• Clownfish Voice Changer
• VoiceMod

Android & iOS Voice Changer Apps

For mobile users, there is a wide range of amazing voice changers. Both Android and iOS users can enjoy the services and benefit from the voice-changing apps. You can record your voice and then add cool effects to it. Or else, you can listen and choose your favorite sound effect and then record your voice.

Do you want to know an exciting thing? Well, with these voice changers, you can prank you’re your friends and family by adding different voice effects and having fun. Let us share a few Android voice changers:

• MagicCall
• Prank Dial

What about iOS users? Don’t worry; given below are the voice changers that are best for iOS devices:

• Voice Changer Plus
• Call Voice Changer – IntCall

The Bottom Line

After reading this article, pranking your friends and speaking with a unique voice will never be a problem for you. We have discussed in detail various factors that aid in making you sound unique. Moreover, we also shared some practices that can completely change your voice.

02 How to Change Your Voice in Practice?

03 How to Change Your Voice with Voice Changer Apps?

Part 1. What Factors Make Your Sound Unique and Special?

Naturally, a person’s voice changes with time. Although time is not only the reason, the environment also plays an essential role in changing voice. The environment has a significant effect on the way someone walks, talks, or even how someone acts on something. There are various factors upon which your voice sounds unique and special; some of these factors are briefly discussed below:

1. Gender

Females have small vocal cords as compared to males since birth. Then at puberty, the rise in the testosterone level causes the larynx to enlarge, and that changes your voice. Over time, the vocal cords thicken and tighten, which creates a vibration in sound along with deeper resonance. For females, the cords do not get tight, which results in a high pitch in the female voice.

2. Structure of Anomalies

The structure of anomalies is referred to as cleft palates deviated spectrum. Anomalies affect the clearness that is in a person’s voice. The structure of one’s voice can be altered by the age, overall health, cleanliness, and emotional state of a person. Alongside the texture of sound, pitch and timbre can also change your voice.

3. Body Structure

Bodyweight plays a vital role in changing voice. Obese men produce excessive estrogen that causes a rise in their voices. On the contrary, obese women have excessive testosterone that makes their voice deeper than others. Being obese makes the breath control better that results in generating a raspy sound.

4. Height

Underweight people have less endurance which increases the chance of injury to vocal cords. In comparison, heightened people have comparatively bigger lungs and larger lower airways, causing them to produce deeper voices compared to short people.

5. Heredity

Heredity and genetics play an important role in shaping your voice as it is a part of your anatomy too. Genetics is why you might find people from the same family have similar voices. Sound is made by the vocal cords that are in the larynx. The larynx is given a genetic code, which alters itself over time. These alterations, as a reaction, change your voice.

Part 2. How to Change Your Voice in Practice?

There are multiple reasons why someone wants to change their voice. Someone might not be satisfied with their low pitch voice or want to have a deeper voice. At the same time, you might also want to change your voice to any frictional character. Or you might want to change your voice to Morgan freeman too.

The real question is ‘Can you change your voice?’. Yes, it is possible. There are a lot of ways to do it, but they differ in complexity and effectiveness. You can either use any voice changer, or else you can also choose the natural way, which is a long-term approach. A few ways to change your voice in practice are discussed below:

Change the Way you Talk

Expressions change the emotions that affect the voice. Nasal and non-nasal voices differ as the nasal voices have a higher pitch as compared to non-nasal sounds. Changing the accent also affects the voice. The voice apparently stays the same, but the hearings of words change to make others feel the change of voice—for example, American and British accents.

Taking Care of Vocal Cords

Taking care of vocal cords can help change your voice. Smoking causes loss of voice and lowers the range of voice. Screaming can damage the vocal cords that automatically affects the voice. Breathing in polluted air not only changes the voice but also damages the vocal cords.

Vocal Exercises

There are some exercises that relax the vocal cords. These exercises include massaging the throat to loosen tense muscles, humming, taking deep breaths. Another exercise is loosening the jaw by opening it wide and closing it gently. Lip buzzing, yawning, and tongue trills are also considered exercises for vocal cords that can change your voice.

Part 3. How to Change Your Voice with Voice Changer Apps?

As we mentioned earlier that there are various ways to change your voice. Now that we have talked about some factors to sound unique and some practices to change your voice, it’s time to learn about voice changer apps. So, are you ready to learn about voice changers with effects to change your voice?

Windows & Mac Voice Changer Apps

When we talk about voice changer apps, different apps are available for Windows, and Mac. These applications provide different and unique features, making it fun to use the voice changer. Using a voice changer with effects can add different sound effects to your voice and modify it.

Moreover, voice changer apps allow you to change your voice on various gaming platforms. Not just this, but you can also have fun because some voice changers work perfectly with Zoom Meetings, Google Meet, etc. Let us share some great voice changers with you.

• AV Voice Changer
• MorphVox
• Clownfish Voice Changer
• VoiceMod

Android & iOS Voice Changer Apps

For mobile users, there is a wide range of amazing voice changers. Both Android and iOS users can enjoy the services and benefit from the voice-changing apps. You can record your voice and then add cool effects to it. Or else, you can listen and choose your favorite sound effect and then record your voice.

Do you want to know an exciting thing? Well, with these voice changers, you can prank you’re your friends and family by adding different voice effects and having fun. Let us share a few Android voice changers:

• MagicCall
• Prank Dial

What about iOS users? Don’t worry; given below are the voice changers that are best for iOS devices:

• Voice Changer Plus
• Call Voice Changer – IntCall

The Bottom Line

After reading this article, pranking your friends and speaking with a unique voice will never be a problem for you. We have discussed in detail various factors that aid in making you sound unique. Moreover, we also shared some practices that can completely change your voice.

02 How to Change Your Voice in Practice?

03 How to Change Your Voice with Voice Changer Apps?

Part 1. What Factors Make Your Sound Unique and Special?

Naturally, a person’s voice changes with time. Although time is not only the reason, the environment also plays an essential role in changing voice. The environment has a significant effect on the way someone walks, talks, or even how someone acts on something. There are various factors upon which your voice sounds unique and special; some of these factors are briefly discussed below:

1. Gender

Females have small vocal cords as compared to males since birth. Then at puberty, the rise in the testosterone level causes the larynx to enlarge, and that changes your voice. Over time, the vocal cords thicken and tighten, which creates a vibration in sound along with deeper resonance. For females, the cords do not get tight, which results in a high pitch in the female voice.

2. Structure of Anomalies

The structure of anomalies is referred to as cleft palates deviated spectrum. Anomalies affect the clearness that is in a person’s voice. The structure of one’s voice can be altered by the age, overall health, cleanliness, and emotional state of a person. Alongside the texture of sound, pitch and timbre can also change your voice.

3. Body Structure

Bodyweight plays a vital role in changing voice. Obese men produce excessive estrogen that causes a rise in their voices. On the contrary, obese women have excessive testosterone that makes their voice deeper than others. Being obese makes the breath control better that results in generating a raspy sound.

4. Height

Underweight people have less endurance which increases the chance of injury to vocal cords. In comparison, heightened people have comparatively bigger lungs and larger lower airways, causing them to produce deeper voices compared to short people.

5. Heredity

Heredity and genetics play an important role in shaping your voice as it is a part of your anatomy too. Genetics is why you might find people from the same family have similar voices. Sound is made by the vocal cords that are in the larynx. The larynx is given a genetic code, which alters itself over time. These alterations, as a reaction, change your voice.

Part 2. How to Change Your Voice in Practice?

There are multiple reasons why someone wants to change their voice. Someone might not be satisfied with their low pitch voice or want to have a deeper voice. At the same time, you might also want to change your voice to any frictional character. Or you might want to change your voice to Morgan freeman too.

The real question is ‘Can you change your voice?’. Yes, it is possible. There are a lot of ways to do it, but they differ in complexity and effectiveness. You can either use any voice changer, or else you can also choose the natural way, which is a long-term approach. A few ways to change your voice in practice are discussed below:

Change the Way you Talk

Expressions change the emotions that affect the voice. Nasal and non-nasal voices differ as the nasal voices have a higher pitch as compared to non-nasal sounds. Changing the accent also affects the voice. The voice apparently stays the same, but the hearings of words change to make others feel the change of voice—for example, American and British accents.

Taking Care of Vocal Cords

Taking care of vocal cords can help change your voice. Smoking causes loss of voice and lowers the range of voice. Screaming can damage the vocal cords that automatically affects the voice. Breathing in polluted air not only changes the voice but also damages the vocal cords.

Vocal Exercises

There are some exercises that relax the vocal cords. These exercises include massaging the throat to loosen tense muscles, humming, taking deep breaths. Another exercise is loosening the jaw by opening it wide and closing it gently. Lip buzzing, yawning, and tongue trills are also considered exercises for vocal cords that can change your voice.

Part 3. How to Change Your Voice with Voice Changer Apps?

As we mentioned earlier that there are various ways to change your voice. Now that we have talked about some factors to sound unique and some practices to change your voice, it’s time to learn about voice changer apps. So, are you ready to learn about voice changers with effects to change your voice?

Windows & Mac Voice Changer Apps

When we talk about voice changer apps, different apps are available for Windows, and Mac. These applications provide different and unique features, making it fun to use the voice changer. Using a voice changer with effects can add different sound effects to your voice and modify it.

Moreover, voice changer apps allow you to change your voice on various gaming platforms. Not just this, but you can also have fun because some voice changers work perfectly with Zoom Meetings, Google Meet, etc. Let us share some great voice changers with you.

• AV Voice Changer
• MorphVox
• Clownfish Voice Changer
• VoiceMod

Android & iOS Voice Changer Apps

For mobile users, there is a wide range of amazing voice changers. Both Android and iOS users can enjoy the services and benefit from the voice-changing apps. You can record your voice and then add cool effects to it. Or else, you can listen and choose your favorite sound effect and then record your voice.

Do you want to know an exciting thing? Well, with these voice changers, you can prank you’re your friends and family by adding different voice effects and having fun. Let us share a few Android voice changers:

• MagicCall
• Prank Dial

What about iOS users? Don’t worry; given below are the voice changers that are best for iOS devices:

• Voice Changer Plus
• Call Voice Changer – IntCall

The Bottom Line

After reading this article, pranking your friends and speaking with a unique voice will never be a problem for you. We have discussed in detail various factors that aid in making you sound unique. Moreover, we also shared some practices that can completely change your voice.

The Innovator’s Guide to Non-Intrusive Audio Modulation in Modern Videos

How to Adjust Audio Volume in Videos [4 Ways]

Shanoon Cox

Mar 27, 2024• Proven solutions

Some of the greatest film directors of all time have used sound to make the scenes in their movies more dramatic, romantic or to build suspense. The importance of sound for the overall quality of a video is often overlooked by young filmmakers, as they tend to dedicate all of their attention to the visual part of their projects.

The fact of the matter is that even a minor error in the video’s soundtrack can distract the viewer and ruin a video completely. That’s why, in this article, we are going to show you four different methods of adjusting the audio volume in Filmora.

To increse the volume of your video, click here.

Four Ways of Adjusting Audio Volume in Filmora

The audio clips often have different volume levels, so in order to create a balanced soundtrack, you have to adjust the volume of each audio track you intend to use in your projects. Filmora offers several different ways to adjust the volume of audio files quickly and effortlessly. Here’s how you can increase or decrease the volume of the audio clips in Filmora.

Download Filmora and watch the video below to get a full knowledge abtou adjusting volume!

1. Changing the Audio Volume of Entire Track

This is probably the easiest and fastest way to adjust the volume of a video or an audio file in Filmora. After you import the file into a project you just have to add it to a certain position on the timeline. You can do this by simply dragging and dropping the file at the location on the timeline where you want the file to be placed. Click on the Add Track menu that is located in the upper left corner of the timeline and select the Big option from the Adjust Track Height submenu.

Enlarging the video and audio tracks will enable you to see the audio volume line that is displayed over all clips that contain sound you add to the timeline. Click on the line and drag it upwards if you would like to increase the volume or drag it downwards if you want to decrease the volume of an audio or a video file.

2. Applying the Fade In and Fade Out Effects to Change the Audio Volume Partially

Once you add an audio clip to an audio track on Filmora’s timeline, you can adjust its volume from the Audio Editing panel. Double-clicking on an audio file will bring up the Audio Editing panel that contains Fade In and Fade Out sliders. Both sliders are going to be set to zero by default, so you just have to drag each of them to the right in order to create the Fade In or Fade Out effect.

Filmora also lets you create the Fade In and Fade Out effect directly from the timeline, as you just have to hover the mouse over an audio file and drag the Fade In or Fade Out markers to set the duration of the effect for that particular file.

3. Using the Volume Slider to Change the Audio Volume

On the left side of the Audio Editing panel that can be accessed by double clicking on an audio file, you will be able to see the volume slider. Its value is going to be set to 0 dB by default and you just have to drag it upward or downward in order to adjust the audio volume. As you drag the slider the new audio volume value is going to be displayed in a box below the slider. The left/right balance value can be adjusted by dragging the knob that is located above the volume slider in either direction. Alternatively, you can insert a new numerical value in the box below the knob. If the displayed value is 0 dB, then the left and right channels are balanced, while the value of -100 dB means that all the sound goes through the left channel and if the displayed value is 100 dB all the sound will go through the right channel.

4. Adding Keyframes to Adjust the Audio Volume

Once you add an audio file to the timeline you can adjust its volume by adding keyframes to it. Place the playhead to the exact spot in the audio file where you want to add the first keyframe and then double click on the file to bring up the Audio Editing panel. Click on the Add Volume Keyframes icon and use the volume slider to adjust the volume at the position of the first keyframe.

Simply move the playhead and change the value on the volume slider to add new keyframes to the audio file. This method of adjusting audio volume enables you to set different volume values for different parts of an audio file.

Still not solved? Try this audio guide of Filmora to settle all the audio problems.

Conclusion

Having complete control over the volume of all audio files you use in your projects is important for so many different reasons. Filmora offers four easy ways to adjust the audio volume so you can focus on more important tasks. Which method of adjusting the audio volume in Filmora do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Some of the greatest film directors of all time have used sound to make the scenes in their movies more dramatic, romantic or to build suspense. The importance of sound for the overall quality of a video is often overlooked by young filmmakers, as they tend to dedicate all of their attention to the visual part of their projects.

The fact of the matter is that even a minor error in the video’s soundtrack can distract the viewer and ruin a video completely. That’s why, in this article, we are going to show you four different methods of adjusting the audio volume in Filmora.

To increse the volume of your video, click here.

Four Ways of Adjusting Audio Volume in Filmora

The audio clips often have different volume levels, so in order to create a balanced soundtrack, you have to adjust the volume of each audio track you intend to use in your projects. Filmora offers several different ways to adjust the volume of audio files quickly and effortlessly. Here’s how you can increase or decrease the volume of the audio clips in Filmora.

Download Filmora and watch the video below to get a full knowledge abtou adjusting volume!

1. Changing the Audio Volume of Entire Track

This is probably the easiest and fastest way to adjust the volume of a video or an audio file in Filmora. After you import the file into a project you just have to add it to a certain position on the timeline. You can do this by simply dragging and dropping the file at the location on the timeline where you want the file to be placed. Click on the Add Track menu that is located in the upper left corner of the timeline and select the Big option from the Adjust Track Height submenu.

Enlarging the video and audio tracks will enable you to see the audio volume line that is displayed over all clips that contain sound you add to the timeline. Click on the line and drag it upwards if you would like to increase the volume or drag it downwards if you want to decrease the volume of an audio or a video file.

2. Applying the Fade In and Fade Out Effects to Change the Audio Volume Partially

Once you add an audio clip to an audio track on Filmora’s timeline, you can adjust its volume from the Audio Editing panel. Double-clicking on an audio file will bring up the Audio Editing panel that contains Fade In and Fade Out sliders. Both sliders are going to be set to zero by default, so you just have to drag each of them to the right in order to create the Fade In or Fade Out effect.

Filmora also lets you create the Fade In and Fade Out effect directly from the timeline, as you just have to hover the mouse over an audio file and drag the Fade In or Fade Out markers to set the duration of the effect for that particular file.

3. Using the Volume Slider to Change the Audio Volume

On the left side of the Audio Editing panel that can be accessed by double clicking on an audio file, you will be able to see the volume slider. Its value is going to be set to 0 dB by default and you just have to drag it upward or downward in order to adjust the audio volume. As you drag the slider the new audio volume value is going to be displayed in a box below the slider. The left/right balance value can be adjusted by dragging the knob that is located above the volume slider in either direction. Alternatively, you can insert a new numerical value in the box below the knob. If the displayed value is 0 dB, then the left and right channels are balanced, while the value of -100 dB means that all the sound goes through the left channel and if the displayed value is 100 dB all the sound will go through the right channel.

4. Adding Keyframes to Adjust the Audio Volume

Once you add an audio file to the timeline you can adjust its volume by adding keyframes to it. Place the playhead to the exact spot in the audio file where you want to add the first keyframe and then double click on the file to bring up the Audio Editing panel. Click on the Add Volume Keyframes icon and use the volume slider to adjust the volume at the position of the first keyframe.

Simply move the playhead and change the value on the volume slider to add new keyframes to the audio file. This method of adjusting audio volume enables you to set different volume values for different parts of an audio file.

Still not solved? Try this audio guide of Filmora to settle all the audio problems.

Conclusion

Having complete control over the volume of all audio files you use in your projects is important for so many different reasons. Filmora offers four easy ways to adjust the audio volume so you can focus on more important tasks. Which method of adjusting the audio volume in Filmora do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Some of the greatest film directors of all time have used sound to make the scenes in their movies more dramatic, romantic or to build suspense. The importance of sound for the overall quality of a video is often overlooked by young filmmakers, as they tend to dedicate all of their attention to the visual part of their projects.

The fact of the matter is that even a minor error in the video’s soundtrack can distract the viewer and ruin a video completely. That’s why, in this article, we are going to show you four different methods of adjusting the audio volume in Filmora.

To increse the volume of your video, click here.

Four Ways of Adjusting Audio Volume in Filmora

The audio clips often have different volume levels, so in order to create a balanced soundtrack, you have to adjust the volume of each audio track you intend to use in your projects. Filmora offers several different ways to adjust the volume of audio files quickly and effortlessly. Here’s how you can increase or decrease the volume of the audio clips in Filmora.

Download Filmora and watch the video below to get a full knowledge abtou adjusting volume!

1. Changing the Audio Volume of Entire Track

This is probably the easiest and fastest way to adjust the volume of a video or an audio file in Filmora. After you import the file into a project you just have to add it to a certain position on the timeline. You can do this by simply dragging and dropping the file at the location on the timeline where you want the file to be placed. Click on the Add Track menu that is located in the upper left corner of the timeline and select the Big option from the Adjust Track Height submenu.

Enlarging the video and audio tracks will enable you to see the audio volume line that is displayed over all clips that contain sound you add to the timeline. Click on the line and drag it upwards if you would like to increase the volume or drag it downwards if you want to decrease the volume of an audio or a video file.

2. Applying the Fade In and Fade Out Effects to Change the Audio Volume Partially

Once you add an audio clip to an audio track on Filmora’s timeline, you can adjust its volume from the Audio Editing panel. Double-clicking on an audio file will bring up the Audio Editing panel that contains Fade In and Fade Out sliders. Both sliders are going to be set to zero by default, so you just have to drag each of them to the right in order to create the Fade In or Fade Out effect.

Filmora also lets you create the Fade In and Fade Out effect directly from the timeline, as you just have to hover the mouse over an audio file and drag the Fade In or Fade Out markers to set the duration of the effect for that particular file.

3. Using the Volume Slider to Change the Audio Volume

On the left side of the Audio Editing panel that can be accessed by double clicking on an audio file, you will be able to see the volume slider. Its value is going to be set to 0 dB by default and you just have to drag it upward or downward in order to adjust the audio volume. As you drag the slider the new audio volume value is going to be displayed in a box below the slider. The left/right balance value can be adjusted by dragging the knob that is located above the volume slider in either direction. Alternatively, you can insert a new numerical value in the box below the knob. If the displayed value is 0 dB, then the left and right channels are balanced, while the value of -100 dB means that all the sound goes through the left channel and if the displayed value is 100 dB all the sound will go through the right channel.

4. Adding Keyframes to Adjust the Audio Volume

Once you add an audio file to the timeline you can adjust its volume by adding keyframes to it. Place the playhead to the exact spot in the audio file where you want to add the first keyframe and then double click on the file to bring up the Audio Editing panel. Click on the Add Volume Keyframes icon and use the volume slider to adjust the volume at the position of the first keyframe.

Simply move the playhead and change the value on the volume slider to add new keyframes to the audio file. This method of adjusting audio volume enables you to set different volume values for different parts of an audio file.

Still not solved? Try this audio guide of Filmora to settle all the audio problems.

Conclusion

Having complete control over the volume of all audio files you use in your projects is important for so many different reasons. Filmora offers four easy ways to adjust the audio volume so you can focus on more important tasks. Which method of adjusting the audio volume in Filmora do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Some of the greatest film directors of all time have used sound to make the scenes in their movies more dramatic, romantic or to build suspense. The importance of sound for the overall quality of a video is often overlooked by young filmmakers, as they tend to dedicate all of their attention to the visual part of their projects.

The fact of the matter is that even a minor error in the video’s soundtrack can distract the viewer and ruin a video completely. That’s why, in this article, we are going to show you four different methods of adjusting the audio volume in Filmora.

To increse the volume of your video, click here.

Four Ways of Adjusting Audio Volume in Filmora

The audio clips often have different volume levels, so in order to create a balanced soundtrack, you have to adjust the volume of each audio track you intend to use in your projects. Filmora offers several different ways to adjust the volume of audio files quickly and effortlessly. Here’s how you can increase or decrease the volume of the audio clips in Filmora.

Download Filmora and watch the video below to get a full knowledge abtou adjusting volume!

1. Changing the Audio Volume of Entire Track

This is probably the easiest and fastest way to adjust the volume of a video or an audio file in Filmora. After you import the file into a project you just have to add it to a certain position on the timeline. You can do this by simply dragging and dropping the file at the location on the timeline where you want the file to be placed. Click on the Add Track menu that is located in the upper left corner of the timeline and select the Big option from the Adjust Track Height submenu.

Enlarging the video and audio tracks will enable you to see the audio volume line that is displayed over all clips that contain sound you add to the timeline. Click on the line and drag it upwards if you would like to increase the volume or drag it downwards if you want to decrease the volume of an audio or a video file.

2. Applying the Fade In and Fade Out Effects to Change the Audio Volume Partially

Once you add an audio clip to an audio track on Filmora’s timeline, you can adjust its volume from the Audio Editing panel. Double-clicking on an audio file will bring up the Audio Editing panel that contains Fade In and Fade Out sliders. Both sliders are going to be set to zero by default, so you just have to drag each of them to the right in order to create the Fade In or Fade Out effect.

Filmora also lets you create the Fade In and Fade Out effect directly from the timeline, as you just have to hover the mouse over an audio file and drag the Fade In or Fade Out markers to set the duration of the effect for that particular file.

3. Using the Volume Slider to Change the Audio Volume

On the left side of the Audio Editing panel that can be accessed by double clicking on an audio file, you will be able to see the volume slider. Its value is going to be set to 0 dB by default and you just have to drag it upward or downward in order to adjust the audio volume. As you drag the slider the new audio volume value is going to be displayed in a box below the slider. The left/right balance value can be adjusted by dragging the knob that is located above the volume slider in either direction. Alternatively, you can insert a new numerical value in the box below the knob. If the displayed value is 0 dB, then the left and right channels are balanced, while the value of -100 dB means that all the sound goes through the left channel and if the displayed value is 100 dB all the sound will go through the right channel.

4. Adding Keyframes to Adjust the Audio Volume

Once you add an audio file to the timeline you can adjust its volume by adding keyframes to it. Place the playhead to the exact spot in the audio file where you want to add the first keyframe and then double click on the file to bring up the Audio Editing panel. Click on the Add Volume Keyframes icon and use the volume slider to adjust the volume at the position of the first keyframe.

Simply move the playhead and change the value on the volume slider to add new keyframes to the audio file. This method of adjusting audio volume enables you to set different volume values for different parts of an audio file.

Still not solved? Try this audio guide of Filmora to settle all the audio problems.

Conclusion

Having complete control over the volume of all audio files you use in your projects is important for so many different reasons. Filmora offers four easy ways to adjust the audio volume so you can focus on more important tasks. Which method of adjusting the audio volume in Filmora do you like to use the most? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Integrate Music Files with Sony Vegas Pro Projects

Everyone does not have expertise in using the Final Cut Pro. Some are beginners and completely new to the tool. These are always looking for proper support and want to know how to add music to final cut pro. In case you are one of these individuals, you should be focused on proper procedure and follow it step-by-step. In the upcoming paragraphs, you will get complete information about it.

In this article

01 [Add Music To Final Cut Pro](#Part 1)

02 [Alternative For Final Cut Pro To Add Music To Video](#Part 2)

Part 1 Add Music To Final Cut Pro

Are you interested to figure out the best possible method to add music files to Final Cut Pro for video creation and other purposes? If you are looking for such an option, you should be focused on the following process.

Step1 Access Final Cut Pro

Firstly, you should focus on accessing the Final Cut Pro. You should check out the application on your desktop and open it.

Step2 Go To File

After accessing the Final Cut Pro, you can see multiple options and menus on the interface. Here, you should navigate to the ‘FILE’ option. You can find out this particular option on the top of the navigation bar.

Step3 Access File

Now, you should access the FILE button. It will lead to a fully-featured menu with multiple options. You should find out the IMPORT button and proceed.

Step4 Import Button

When you click on the IMPORT button, it will provide some choices. You should go with the option of MEDIA.

Step5 Locate File

After clicking the media button, it will present a complete file and storage interface in front of you. You should find out the audio file on your device by using such an interface. Here, you need to access the targeted folder only. You should select the audio file and hit the IMPORT button. It will bring your desired audio file to the Final Cut Pro easily for further usage.

Step6 Add Audio to Video

Once you get the audio file to the library of Final Cut Pro, after that, you should proceed by arranging it as per the video sequence and requirements. You should take the video timeline carefully and make all edits smartly. Here, you will find out drag and drop features are highly beneficial. It will help you synchronize the audio and video with ease.

It is the complete process by which you can easily add music to final cut pro. With it, you also have the option of accessing its built-in music library. By using this particular library, you can get multiple audio files with sound effects, songs, etc. You can access these files to add to the video as well. In case you don’t find something relevant to the content, you can consider the option of importing your own as per the procedure.

Part 2 Alternative For Final Cut Pro To Add Music To Video

No one can ignore the features and functionalities of Final Cut Pro. But, sometimes people don’t find it suitable or appropriate as per their video editing requirements. It is the main reason why they start looking for some alternatives that can help them in getting better results with top-notch edits.

Filmora

All individuals are not working as professional video editors or designers. Due to it, they lack technical knowledge and are also unaware of the tool’s interfaces and their usability. As a result, they start facing lots of problems with complicated tools. In case you want to access a video editor with a user-friendly interface that can be helpful in creating content easily, you can consider Filmora. It is the easiest video editor to use that can be useful in creating and editing videos with ease.

Both Windows and Mac users can access Filmora by downloading software on the system. On the other hand, Final Cut Pro is available only for the Mac.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Benefits

User-friendly interface

A big music library

Available for mobile platforms as well (Filmora)

Regular updates for features and functionalities

Drawbacks

Less audio editing features

By paying attention to these aspects, you can easily understand how important and useful Filmora is. It is also having some audio editing features. It will allow you to make changes in audio files as per the requirements and keep it perfect according to the video.

Premiere Pro

Premiere Pro is not new in the market. It is an old and famous editing tool. But, the main fact about this particular source is its usability. Everyone cannot consider the option of this particular video editor. There are multiple reasons behind it. Some people may find the tool difficult to use.

For some individuals, its charges are too high. Actually, Premiere Pro is paid source. Its plans are also too expensive. If you consider its option, you have two choices bill monthly or annually. In case you choose monthly billing, you will need to pay around $31.49 per month. Annual billing will help you save some money and it costs an average of $20.99 per month.

Benefits

Regular updates

Templates, plugins, and preset options available

Drawbacks

Too Expensive

Complicated

Premiere Pro is a complicated tool to use. It is mainly made for the professionals who master these types of skills and work on big projects. If a beginner tries to access it, they may find it irrelevant and hard to understand. It takes lots of time to process and complete some basic things as well.

CyberLink PowerDirector

It is also a paid option to consider. If you choose to use CyberLink PowerDirector for the first time, you can avail of its free trial services as well. It provides a free trial of 30 days that can help you access the tool’s capability and figure out it is worth buying or not. The following are some benefits and drawbacks of choosing this particular option.

Benefits

Regular updates

Multiple features

Drawbacks

Lack of color tools

CyberLink PowerDirector is a suitable option for video editing professionals with mid-level skills. Highly skilled individuals can consider its option but they may find it easy to use and don’t get some advanced feature as per their skill set.

Conclusion

By paying attention to all these details, you can easily figure out the best final cut pro add music method. It depends on your choice that you want to use some existing audio file or want to import your own. Along with it, you can also check out some alternatives that can help you figure out what kind of tools can be considered over Final Cut Pro for better results. Filmora holds the top-notch position with lots of features, functionalities, and complete accessibilities. You need to be smart while making a final decision regarding video editor selection for creating top-notch video content to entertain the audience perfectly.

02 [Alternative For Final Cut Pro To Add Music To Video](#Part 2)

Part 1 Add Music To Final Cut Pro

Are you interested to figure out the best possible method to add music files to Final Cut Pro for video creation and other purposes? If you are looking for such an option, you should be focused on the following process.

Step1 Access Final Cut Pro

Firstly, you should focus on accessing the Final Cut Pro. You should check out the application on your desktop and open it.

Step2 Go To File

After accessing the Final Cut Pro, you can see multiple options and menus on the interface. Here, you should navigate to the ‘FILE’ option. You can find out this particular option on the top of the navigation bar.

Step3 Access File

Now, you should access the FILE button. It will lead to a fully-featured menu with multiple options. You should find out the IMPORT button and proceed.

Step4 Import Button

When you click on the IMPORT button, it will provide some choices. You should go with the option of MEDIA.

Step5 Locate File

After clicking the media button, it will present a complete file and storage interface in front of you. You should find out the audio file on your device by using such an interface. Here, you need to access the targeted folder only. You should select the audio file and hit the IMPORT button. It will bring your desired audio file to the Final Cut Pro easily for further usage.

Step6 Add Audio to Video

Once you get the audio file to the library of Final Cut Pro, after that, you should proceed by arranging it as per the video sequence and requirements. You should take the video timeline carefully and make all edits smartly. Here, you will find out drag and drop features are highly beneficial. It will help you synchronize the audio and video with ease.

It is the complete process by which you can easily add music to final cut pro. With it, you also have the option of accessing its built-in music library. By using this particular library, you can get multiple audio files with sound effects, songs, etc. You can access these files to add to the video as well. In case you don’t find something relevant to the content, you can consider the option of importing your own as per the procedure.

Part 2 Alternative For Final Cut Pro To Add Music To Video

No one can ignore the features and functionalities of Final Cut Pro. But, sometimes people don’t find it suitable or appropriate as per their video editing requirements. It is the main reason why they start looking for some alternatives that can help them in getting better results with top-notch edits.

Filmora

All individuals are not working as professional video editors or designers. Due to it, they lack technical knowledge and are also unaware of the tool’s interfaces and their usability. As a result, they start facing lots of problems with complicated tools. In case you want to access a video editor with a user-friendly interface that can be helpful in creating content easily, you can consider Filmora. It is the easiest video editor to use that can be useful in creating and editing videos with ease.

Both Windows and Mac users can access Filmora by downloading software on the system. On the other hand, Final Cut Pro is available only for the Mac.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Benefits

User-friendly interface

A big music library

Available for mobile platforms as well (Filmora)

Regular updates for features and functionalities

Drawbacks

Less audio editing features

By paying attention to these aspects, you can easily understand how important and useful Filmora is. It is also having some audio editing features. It will allow you to make changes in audio files as per the requirements and keep it perfect according to the video.

Premiere Pro

Premiere Pro is not new in the market. It is an old and famous editing tool. But, the main fact about this particular source is its usability. Everyone cannot consider the option of this particular video editor. There are multiple reasons behind it. Some people may find the tool difficult to use.

For some individuals, its charges are too high. Actually, Premiere Pro is paid source. Its plans are also too expensive. If you consider its option, you have two choices bill monthly or annually. In case you choose monthly billing, you will need to pay around $31.49 per month. Annual billing will help you save some money and it costs an average of $20.99 per month.

Benefits

Regular updates

Templates, plugins, and preset options available

Drawbacks

Too Expensive

Complicated

Premiere Pro is a complicated tool to use. It is mainly made for the professionals who master these types of skills and work on big projects. If a beginner tries to access it, they may find it irrelevant and hard to understand. It takes lots of time to process and complete some basic things as well.

CyberLink PowerDirector

It is also a paid option to consider. If you choose to use CyberLink PowerDirector for the first time, you can avail of its free trial services as well. It provides a free trial of 30 days that can help you access the tool’s capability and figure out it is worth buying or not. The following are some benefits and drawbacks of choosing this particular option.

Benefits

Regular updates

Multiple features

Drawbacks

Lack of color tools

CyberLink PowerDirector is a suitable option for video editing professionals with mid-level skills. Highly skilled individuals can consider its option but they may find it easy to use and don’t get some advanced feature as per their skill set.

Conclusion

By paying attention to all these details, you can easily figure out the best final cut pro add music method. It depends on your choice that you want to use some existing audio file or want to import your own. Along with it, you can also check out some alternatives that can help you figure out what kind of tools can be considered over Final Cut Pro for better results. Filmora holds the top-notch position with lots of features, functionalities, and complete accessibilities. You need to be smart while making a final decision regarding video editor selection for creating top-notch video content to entertain the audience perfectly.

02 [Alternative For Final Cut Pro To Add Music To Video](#Part 2)

Part 1 Add Music To Final Cut Pro

Are you interested to figure out the best possible method to add music files to Final Cut Pro for video creation and other purposes? If you are looking for such an option, you should be focused on the following process.

Step1 Access Final Cut Pro

Firstly, you should focus on accessing the Final Cut Pro. You should check out the application on your desktop and open it.

Step2 Go To File

After accessing the Final Cut Pro, you can see multiple options and menus on the interface. Here, you should navigate to the ‘FILE’ option. You can find out this particular option on the top of the navigation bar.

Step3 Access File

Now, you should access the FILE button. It will lead to a fully-featured menu with multiple options. You should find out the IMPORT button and proceed.

Step4 Import Button

When you click on the IMPORT button, it will provide some choices. You should go with the option of MEDIA.

Step5 Locate File

After clicking the media button, it will present a complete file and storage interface in front of you. You should find out the audio file on your device by using such an interface. Here, you need to access the targeted folder only. You should select the audio file and hit the IMPORT button. It will bring your desired audio file to the Final Cut Pro easily for further usage.

Step6 Add Audio to Video

Once you get the audio file to the library of Final Cut Pro, after that, you should proceed by arranging it as per the video sequence and requirements. You should take the video timeline carefully and make all edits smartly. Here, you will find out drag and drop features are highly beneficial. It will help you synchronize the audio and video with ease.

It is the complete process by which you can easily add music to final cut pro. With it, you also have the option of accessing its built-in music library. By using this particular library, you can get multiple audio files with sound effects, songs, etc. You can access these files to add to the video as well. In case you don’t find something relevant to the content, you can consider the option of importing your own as per the procedure.

Part 2 Alternative For Final Cut Pro To Add Music To Video

No one can ignore the features and functionalities of Final Cut Pro. But, sometimes people don’t find it suitable or appropriate as per their video editing requirements. It is the main reason why they start looking for some alternatives that can help them in getting better results with top-notch edits.

Filmora

All individuals are not working as professional video editors or designers. Due to it, they lack technical knowledge and are also unaware of the tool’s interfaces and their usability. As a result, they start facing lots of problems with complicated tools. In case you want to access a video editor with a user-friendly interface that can be helpful in creating content easily, you can consider Filmora. It is the easiest video editor to use that can be useful in creating and editing videos with ease.

Both Windows and Mac users can access Filmora by downloading software on the system. On the other hand, Final Cut Pro is available only for the Mac.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Benefits

User-friendly interface

A big music library

Available for mobile platforms as well (Filmora)

Regular updates for features and functionalities

Drawbacks

Less audio editing features

By paying attention to these aspects, you can easily understand how important and useful Filmora is. It is also having some audio editing features. It will allow you to make changes in audio files as per the requirements and keep it perfect according to the video.

Premiere Pro

Premiere Pro is not new in the market. It is an old and famous editing tool. But, the main fact about this particular source is its usability. Everyone cannot consider the option of this particular video editor. There are multiple reasons behind it. Some people may find the tool difficult to use.

For some individuals, its charges are too high. Actually, Premiere Pro is paid source. Its plans are also too expensive. If you consider its option, you have two choices bill monthly or annually. In case you choose monthly billing, you will need to pay around $31.49 per month. Annual billing will help you save some money and it costs an average of $20.99 per month.

Benefits

Regular updates

Templates, plugins, and preset options available

Drawbacks

Too Expensive

Complicated

Premiere Pro is a complicated tool to use. It is mainly made for the professionals who master these types of skills and work on big projects. If a beginner tries to access it, they may find it irrelevant and hard to understand. It takes lots of time to process and complete some basic things as well.

CyberLink PowerDirector

It is also a paid option to consider. If you choose to use CyberLink PowerDirector for the first time, you can avail of its free trial services as well. It provides a free trial of 30 days that can help you access the tool’s capability and figure out it is worth buying or not. The following are some benefits and drawbacks of choosing this particular option.

Benefits

Regular updates

Multiple features

Drawbacks

Lack of color tools

CyberLink PowerDirector is a suitable option for video editing professionals with mid-level skills. Highly skilled individuals can consider its option but they may find it easy to use and don’t get some advanced feature as per their skill set.

Conclusion

By paying attention to all these details, you can easily figure out the best final cut pro add music method. It depends on your choice that you want to use some existing audio file or want to import your own. Along with it, you can also check out some alternatives that can help you figure out what kind of tools can be considered over Final Cut Pro for better results. Filmora holds the top-notch position with lots of features, functionalities, and complete accessibilities. You need to be smart while making a final decision regarding video editor selection for creating top-notch video content to entertain the audience perfectly.

02 [Alternative For Final Cut Pro To Add Music To Video](#Part 2)

Part 1 Add Music To Final Cut Pro

Are you interested to figure out the best possible method to add music files to Final Cut Pro for video creation and other purposes? If you are looking for such an option, you should be focused on the following process.

Step1 Access Final Cut Pro

Firstly, you should focus on accessing the Final Cut Pro. You should check out the application on your desktop and open it.

Step2 Go To File

After accessing the Final Cut Pro, you can see multiple options and menus on the interface. Here, you should navigate to the ‘FILE’ option. You can find out this particular option on the top of the navigation bar.

Step3 Access File

Now, you should access the FILE button. It will lead to a fully-featured menu with multiple options. You should find out the IMPORT button and proceed.

Step4 Import Button

When you click on the IMPORT button, it will provide some choices. You should go with the option of MEDIA.

Step5 Locate File

After clicking the media button, it will present a complete file and storage interface in front of you. You should find out the audio file on your device by using such an interface. Here, you need to access the targeted folder only. You should select the audio file and hit the IMPORT button. It will bring your desired audio file to the Final Cut Pro easily for further usage.

Step6 Add Audio to Video

Once you get the audio file to the library of Final Cut Pro, after that, you should proceed by arranging it as per the video sequence and requirements. You should take the video timeline carefully and make all edits smartly. Here, you will find out drag and drop features are highly beneficial. It will help you synchronize the audio and video with ease.

It is the complete process by which you can easily add music to final cut pro. With it, you also have the option of accessing its built-in music library. By using this particular library, you can get multiple audio files with sound effects, songs, etc. You can access these files to add to the video as well. In case you don’t find something relevant to the content, you can consider the option of importing your own as per the procedure.

Part 2 Alternative For Final Cut Pro To Add Music To Video

No one can ignore the features and functionalities of Final Cut Pro. But, sometimes people don’t find it suitable or appropriate as per their video editing requirements. It is the main reason why they start looking for some alternatives that can help them in getting better results with top-notch edits.

Filmora

All individuals are not working as professional video editors or designers. Due to it, they lack technical knowledge and are also unaware of the tool’s interfaces and their usability. As a result, they start facing lots of problems with complicated tools. In case you want to access a video editor with a user-friendly interface that can be helpful in creating content easily, you can consider Filmora. It is the easiest video editor to use that can be useful in creating and editing videos with ease.

Both Windows and Mac users can access Filmora by downloading software on the system. On the other hand, Final Cut Pro is available only for the Mac.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Benefits

User-friendly interface

A big music library

Available for mobile platforms as well (Filmora)

Regular updates for features and functionalities

Drawbacks

Less audio editing features

By paying attention to these aspects, you can easily understand how important and useful Filmora is. It is also having some audio editing features. It will allow you to make changes in audio files as per the requirements and keep it perfect according to the video.

Premiere Pro

Premiere Pro is not new in the market. It is an old and famous editing tool. But, the main fact about this particular source is its usability. Everyone cannot consider the option of this particular video editor. There are multiple reasons behind it. Some people may find the tool difficult to use.

For some individuals, its charges are too high. Actually, Premiere Pro is paid source. Its plans are also too expensive. If you consider its option, you have two choices bill monthly or annually. In case you choose monthly billing, you will need to pay around $31.49 per month. Annual billing will help you save some money and it costs an average of $20.99 per month.

Benefits

Regular updates

Templates, plugins, and preset options available

Drawbacks

Too Expensive

Complicated

Premiere Pro is a complicated tool to use. It is mainly made for the professionals who master these types of skills and work on big projects. If a beginner tries to access it, they may find it irrelevant and hard to understand. It takes lots of time to process and complete some basic things as well.

CyberLink PowerDirector

It is also a paid option to consider. If you choose to use CyberLink PowerDirector for the first time, you can avail of its free trial services as well. It provides a free trial of 30 days that can help you access the tool’s capability and figure out it is worth buying or not. The following are some benefits and drawbacks of choosing this particular option.

Benefits

Regular updates

Multiple features

Drawbacks

Lack of color tools

CyberLink PowerDirector is a suitable option for video editing professionals with mid-level skills. Highly skilled individuals can consider its option but they may find it easy to use and don’t get some advanced feature as per their skill set.

Conclusion

By paying attention to all these details, you can easily figure out the best final cut pro add music method. It depends on your choice that you want to use some existing audio file or want to import your own. Along with it, you can also check out some alternatives that can help you figure out what kind of tools can be considered over Final Cut Pro for better results. Filmora holds the top-notch position with lots of features, functionalities, and complete accessibilities. You need to be smart while making a final decision regarding video editor selection for creating top-notch video content to entertain the audience perfectly.

Also read: