“Professional Audio Techniques in DaVinci Resolve: The Art of Normalization”

How To Normalize Audio In DaVinci Resolve

It happens a lot of times that we are not satisfied with several details our videos and audios contain, and we need to edit them. One of the most common problems we face is that our volumes are not normalized, and we need to take some extra time in order to achieve the best result for our audiences. Even with little or no knowledge about this very specific topic, we need to inform ourselves and find the solutions, make our videos more watch-able and our audios more listen-able, so to say.

There are several ways the audio normalization is achieved. One type is called peak normalization, helping adjust the recording based on the highest signal level present in the recording; the second is loudness normalization, adjusting the recording based on perceived loudness. RMS (Root-Mean-Square) changes the value of all the samples, where their average electrical volume overall is a specified level.

Mostly, there are two reasons why we should give audio normalization a try. You need to decide yourself, what is your reason and expected outcome when you use audio normalization. First is when your aim is to get the maximum volume, but the second boils down to matching different volumes with each other.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

More concretely, in general, audio normalization is when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, “the norm” for the project. It means that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

You can have the desired result using different kinds of software. Nowadays, a lot of programs offer you the tool which facilitates this process. So, one of them would be DaVinci Resolve, which we are going to discuss in this article.

What is DaVinci Resolve? The description goes: “DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool!” so, let’s discover what this software can do to help us balance the audio!

So, how to balance your audio in DaVinci Resolve? We are going to discuss everything step by step – how to set your target loudness level, how to monitor the loudness, and how you can use the automation feature.

Well, of course, have the program installed and opened. Then, add your video with the audio you want to edit or the audio separately, if that’s what you are aiming to do.

The first step you need to make is to set your target loudness level – for this, find the little settings button on the right bottom of the program and click on it. Now, go down to the Fairlight menu and change the Target Loudness Level. If you are doing the audio normalization for the Youtube content, then it is recommended to set it to -14 LUFS.

Next, you are going to head to the Fairlight page and make sure that your meters are open. the loudness meter is on the right top of the layout of the program, and it goes from +9 to -15 LUFS.

Here, zero represents exactly what our target loudness level is, in this case, as you remember, we set it to -14 LUFS. So, ensure that our loudness is as close as zero as possible on the meter, but you can also make it lower, such as -3. Whenever you play, you will be able to see that there are some numbers popping up to the right of the meter.

The first one, you’ll find, is Short – constantly changing, indicating how far above or below the target loudness level you are at a given time. Short Max tells you how far above or below your target loudness level the loudest point of your video is. Range is a measure of your quietest pick to your loudest peak, and the last one is Integrated – it gives you the overall loudness of your video in relation to your target loudness level. Integrated is the number we aim to keep around -3 or 0.

We can use our main slider (next to the sequence on the right) to make our video louder or quieter until we hit that target loudness level.

Also, there is an automation tool that can help you dial in your loudness. In order to access this feature, find a red icon, looking like a wave with kind of a key frames.

Next, open up your Index (on the far top panel, a little bit from the left), and make sure you are in the tracks menu in your editing index.

What you want to do is to make your main track visible on the timeline, so hit on the eyeball next to your main and go to your timeline, where you will expand your main track until you see your Loudness History options.

Here, you will need to check in the box next to Integrated and turn on the Loudness History. This will show the integrated loudness level, adjust your main track’s volume accordingly, so you are below the zero line. And, that’s actually it!

How to normalize audio in Wondershare Filmora X?

Even though doing this with the help of DaVinci Resolve is really helpful, and, let’s say, sophisticated, you might find it a little complicated, in case you were not so familiar with video/audio editing. So, we would like you to have some information about what alternative you can turn to, and in this case, it’s worth bringing up a software - Wondershare Filmora X . With it, you will find that the same task can be carried out wonderfully. It is also a video editor, but it is one of the easiest to use in the word, supported by Mac and Windows. Filmora offers a great, neat, user-friendly interface, and helps you understand the very basics of editing. Actually, it has not been long since Wondershare Filmora X introduced the feature to normalize the audio. So, you might want download the latest version of Filmora X and start following along the steps we are going to provide for you to understand how audio normalization works on Filmora X .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Techniques for Maintaining Audio Fidelity During Pitch Alteration with Audacity

You may raise or lower the pitch of a pre-recorded song. Likewise, you may apply the pitch-changing effect in real-time sound recording. Change in pitch affects your noise in certain ways. For instance, it can help you sound younger. Similarly, it can convert the male voice into a female voice. Another notable use of the pitch-changing technique is that you can produce sounds like cartoons. So, changing pitch can add a unique touch to your voice. You can also change pitch when recording in Audacity. The following article covers details about the Audacity change pitch feature. Let’s get started.

In this article

01 What is pitch, and how does it work?

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

Beat Design Mastery: Tailoring Soundtracks to Captivate Your Music Videos

How to Make Beats for Your Music Videos?

Benjamin Arango

Mar 27, 2024• Proven solutions

Actually making beats to music videos is one of the best techniques to engage the viewer and adds to the whole video editing experience. Recently more and more people are interested in uploading music videos to Youtube. Videos perfectly synced to music beats gather more clicks, and it can also change the entire tempo and time signature. Finally your music video editing journey will take a whole new dimension with the help of beat making and you will be able to deliver something awesome to your viewers.

• Part 1: How to Make Beats in Wondershare Filmora
• Part 2: Best Music Beat-Making Software Alternatives

Part 1: How to Make Beats in Wondershare Filmora

Want to make beats for your music videos? You may need a helpful beat-making tool. One of the best bets is Wondershare Filmore. Its beat detection feature makes it a perfect fit for music videos. And this beat-making software also offers basic cutting& splitting features and a huge royalty-free library for your music videos.

Just download a free trial of Wondershare Filmora X and get started!

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Step 1: Import Source Videos and Music Files

Launch Filmora after download. You can simply just drag/drop or import the source videos and music that you need to make beats.

Step 2: Start Beat Detection

Right click the music file you want in the Media Library, select Beat Detection, and then Filmora will begin to detect the beats in the music file automatically. You can also go to the Audio tab and get 79 royalty-free music built in Filmora to make beats for your background music if you don’t have your source music.

Step 3: Drag and Drop Videos and Music to Timeline

Filmora might take a while to install the detection plugin, and then you will see a bear marker “b” on the thumbnail of the music file. This means the Filmora is done detecting the beats for the video you selected. Then it is time to drag and drop the video and music to the video and audio track respectively.

Step 4: Configure Your Own Beat Settings

Beat markers in red can be seen on the filmora on every four beats. This is the default configuration. Four beat markers responding to every hit.The settings can be changed by selecting the Beat Options from the right-click menu on the music file in the Media Library. A pop-up window will open where you can make the necessary changes.

Step 5: Sync Your Videos to the Music Beats

Now that you are done marking beats, you can accurately sync the video as per your requirement on the video tracks via per music beat on the audio track. This whole treatment will make the music video smoother and more structured.

Step 6: Save and export your edited project

After you finish all of your music video editing, you can click Export, select the format you want such as mp4 to export your music video. Filmora not only supports various video formats for the export, but also enables you to upload your music video to Youtube or Vimeo directly.

If you have any questions about the steps above when you try to make beats with Filmora or you want to make beats with different software, come on and get more detailed information on Best Beat-Making Tools . And you can also watch the tutorial video below make beats for your music videos.

Part 2: Best Music Beat-Making Software Alternatives

The diversity and abundance in different video editing projects spurs the development of different video editing software. Apart from Wondershare Filmora, here are some of other beat making apps for Smartphones, Mac and PC computers.

1. Final Cut Pro ($299.99)

Final Cut Pro allows the user to sync the beats to the video in many ways. Final Cut Pro does not allow direct addition of the beats but the app works in collaboration with the BeatMark X to help you add the beat markers to the audio you choose as the video soundtrack. This is all done in BeatMark X and then the user is allowed to create XML file then can be then exported to the Final Cut Pro.

The process of adding beats is quite simple. All you have to do is add the music to the timeline. Playback and punch the M key to add a marker on each beat. Then finally lineup the inserted clips.

Review: The platform does not allow an automated process for the addition of footage or creating cuts. And the price is not user friendly if you have a tight budget.

2. Premiere Elements ($59.99 as a single app)

Premiere Elements helps simplify the entire video-making process. Adding beats to the video is a simple task here. All you have to do is add the required audio file to the timeline and then make use of the beat detection. This adds markers to the entire track. The beat detection setting can be customized as per the requirement. The customization takes just a few moments.

Review: This feature can only be used in the expert view of the app only. The expert view app allows the user to add new markers just by punching the set bead maker option in the timeline.

3. Splice (Free, but offers in-app purchases)

Splice is one of the best available options for video editing in case you record lots and lots of videos on your iPad and iPhone. The app showcases all the required features that are needed to edit the videos like a pro. This app also features other editing tools that help to make cuts in the videos or applying filters to them. Splice syncs videos to the beats automatically and also add the transitions wherever required to make the video experience smoother. The app features a huge royalty-free music library and also a built-in voice recorder.

Review: The free version of the app offers very limited options and the user has to subscribe to monthly or annual subscriptions to enjoy the rest.

Conclusion

Making beats is of great importance, which can create magic when you work on a music video. Hopefully you may have a full understanding of how to make beats for your music videos after reading this article. If you want to make beats for your own music video, you can select from all the apps above, and Wondershare Filmora can be a good choice for you. Come on and join us!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Actually making beats to music videos is one of the best techniques to engage the viewer and adds to the whole video editing experience. Recently more and more people are interested in uploading music videos to Youtube. Videos perfectly synced to music beats gather more clicks, and it can also change the entire tempo and time signature. Finally your music video editing journey will take a whole new dimension with the help of beat making and you will be able to deliver something awesome to your viewers.

• Part 1: How to Make Beats in Wondershare Filmora
• Part 2: Best Music Beat-Making Software Alternatives

Part 1: How to Make Beats in Wondershare Filmora

Want to make beats for your music videos? You may need a helpful beat-making tool. One of the best bets is Wondershare Filmore. Its beat detection feature makes it a perfect fit for music videos. And this beat-making software also offers basic cutting& splitting features and a huge royalty-free library for your music videos.

Just download a free trial of Wondershare Filmora X and get started!

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Step 1: Import Source Videos and Music Files

Launch Filmora after download. You can simply just drag/drop or import the source videos and music that you need to make beats.

Step 2: Start Beat Detection

Right click the music file you want in the Media Library, select Beat Detection, and then Filmora will begin to detect the beats in the music file automatically. You can also go to the Audio tab and get 79 royalty-free music built in Filmora to make beats for your background music if you don’t have your source music.

Step 3: Drag and Drop Videos and Music to Timeline

Filmora might take a while to install the detection plugin, and then you will see a bear marker “b” on the thumbnail of the music file. This means the Filmora is done detecting the beats for the video you selected. Then it is time to drag and drop the video and music to the video and audio track respectively.

Step 4: Configure Your Own Beat Settings

Beat markers in red can be seen on the filmora on every four beats. This is the default configuration. Four beat markers responding to every hit.The settings can be changed by selecting the Beat Options from the right-click menu on the music file in the Media Library. A pop-up window will open where you can make the necessary changes.

Step 5: Sync Your Videos to the Music Beats

Now that you are done marking beats, you can accurately sync the video as per your requirement on the video tracks via per music beat on the audio track. This whole treatment will make the music video smoother and more structured.

Step 6: Save and export your edited project

After you finish all of your music video editing, you can click Export, select the format you want such as mp4 to export your music video. Filmora not only supports various video formats for the export, but also enables you to upload your music video to Youtube or Vimeo directly.

If you have any questions about the steps above when you try to make beats with Filmora or you want to make beats with different software, come on and get more detailed information on Best Beat-Making Tools . And you can also watch the tutorial video below make beats for your music videos.

Part 2: Best Music Beat-Making Software Alternatives

The diversity and abundance in different video editing projects spurs the development of different video editing software. Apart from Wondershare Filmora, here are some of other beat making apps for Smartphones, Mac and PC computers.

1. Final Cut Pro ($299.99)

Final Cut Pro allows the user to sync the beats to the video in many ways. Final Cut Pro does not allow direct addition of the beats but the app works in collaboration with the BeatMark X to help you add the beat markers to the audio you choose as the video soundtrack. This is all done in BeatMark X and then the user is allowed to create XML file then can be then exported to the Final Cut Pro.

The process of adding beats is quite simple. All you have to do is add the music to the timeline. Playback and punch the M key to add a marker on each beat. Then finally lineup the inserted clips.

Review: The platform does not allow an automated process for the addition of footage or creating cuts. And the price is not user friendly if you have a tight budget.

2. Premiere Elements ($59.99 as a single app)

Premiere Elements helps simplify the entire video-making process. Adding beats to the video is a simple task here. All you have to do is add the required audio file to the timeline and then make use of the beat detection. This adds markers to the entire track. The beat detection setting can be customized as per the requirement. The customization takes just a few moments.

Review: This feature can only be used in the expert view of the app only. The expert view app allows the user to add new markers just by punching the set bead maker option in the timeline.

3. Splice (Free, but offers in-app purchases)

Splice is one of the best available options for video editing in case you record lots and lots of videos on your iPad and iPhone. The app showcases all the required features that are needed to edit the videos like a pro. This app also features other editing tools that help to make cuts in the videos or applying filters to them. Splice syncs videos to the beats automatically and also add the transitions wherever required to make the video experience smoother. The app features a huge royalty-free music library and also a built-in voice recorder.

Review: The free version of the app offers very limited options and the user has to subscribe to monthly or annual subscriptions to enjoy the rest.

Conclusion

Making beats is of great importance, which can create magic when you work on a music video. Hopefully you may have a full understanding of how to make beats for your music videos after reading this article. If you want to make beats for your own music video, you can select from all the apps above, and Wondershare Filmora can be a good choice for you. Come on and join us!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Actually making beats to music videos is one of the best techniques to engage the viewer and adds to the whole video editing experience. Recently more and more people are interested in uploading music videos to Youtube. Videos perfectly synced to music beats gather more clicks, and it can also change the entire tempo and time signature. Finally your music video editing journey will take a whole new dimension with the help of beat making and you will be able to deliver something awesome to your viewers.

• Part 1: How to Make Beats in Wondershare Filmora
• Part 2: Best Music Beat-Making Software Alternatives

Part 1: How to Make Beats in Wondershare Filmora

Want to make beats for your music videos? You may need a helpful beat-making tool. One of the best bets is Wondershare Filmore. Its beat detection feature makes it a perfect fit for music videos. And this beat-making software also offers basic cutting& splitting features and a huge royalty-free library for your music videos.

Just download a free trial of Wondershare Filmora X and get started!

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Step 1: Import Source Videos and Music Files

Launch Filmora after download. You can simply just drag/drop or import the source videos and music that you need to make beats.

Step 2: Start Beat Detection

Right click the music file you want in the Media Library, select Beat Detection, and then Filmora will begin to detect the beats in the music file automatically. You can also go to the Audio tab and get 79 royalty-free music built in Filmora to make beats for your background music if you don’t have your source music.

Step 3: Drag and Drop Videos and Music to Timeline

Filmora might take a while to install the detection plugin, and then you will see a bear marker “b” on the thumbnail of the music file. This means the Filmora is done detecting the beats for the video you selected. Then it is time to drag and drop the video and music to the video and audio track respectively.

Step 4: Configure Your Own Beat Settings

Beat markers in red can be seen on the filmora on every four beats. This is the default configuration. Four beat markers responding to every hit.The settings can be changed by selecting the Beat Options from the right-click menu on the music file in the Media Library. A pop-up window will open where you can make the necessary changes.

Step 5: Sync Your Videos to the Music Beats

Now that you are done marking beats, you can accurately sync the video as per your requirement on the video tracks via per music beat on the audio track. This whole treatment will make the music video smoother and more structured.

Step 6: Save and export your edited project

After you finish all of your music video editing, you can click Export, select the format you want such as mp4 to export your music video. Filmora not only supports various video formats for the export, but also enables you to upload your music video to Youtube or Vimeo directly.

If you have any questions about the steps above when you try to make beats with Filmora or you want to make beats with different software, come on and get more detailed information on Best Beat-Making Tools . And you can also watch the tutorial video below make beats for your music videos.

Part 2: Best Music Beat-Making Software Alternatives

The diversity and abundance in different video editing projects spurs the development of different video editing software. Apart from Wondershare Filmora, here are some of other beat making apps for Smartphones, Mac and PC computers.

1. Final Cut Pro ($299.99)

Final Cut Pro allows the user to sync the beats to the video in many ways. Final Cut Pro does not allow direct addition of the beats but the app works in collaboration with the BeatMark X to help you add the beat markers to the audio you choose as the video soundtrack. This is all done in BeatMark X and then the user is allowed to create XML file then can be then exported to the Final Cut Pro.

The process of adding beats is quite simple. All you have to do is add the music to the timeline. Playback and punch the M key to add a marker on each beat. Then finally lineup the inserted clips.

Review: The platform does not allow an automated process for the addition of footage or creating cuts. And the price is not user friendly if you have a tight budget.

2. Premiere Elements ($59.99 as a single app)

Premiere Elements helps simplify the entire video-making process. Adding beats to the video is a simple task here. All you have to do is add the required audio file to the timeline and then make use of the beat detection. This adds markers to the entire track. The beat detection setting can be customized as per the requirement. The customization takes just a few moments.

Review: This feature can only be used in the expert view of the app only. The expert view app allows the user to add new markers just by punching the set bead maker option in the timeline.

3. Splice (Free, but offers in-app purchases)

Splice is one of the best available options for video editing in case you record lots and lots of videos on your iPad and iPhone. The app showcases all the required features that are needed to edit the videos like a pro. This app also features other editing tools that help to make cuts in the videos or applying filters to them. Splice syncs videos to the beats automatically and also add the transitions wherever required to make the video experience smoother. The app features a huge royalty-free music library and also a built-in voice recorder.

Review: The free version of the app offers very limited options and the user has to subscribe to monthly or annual subscriptions to enjoy the rest.

Conclusion

Making beats is of great importance, which can create magic when you work on a music video. Hopefully you may have a full understanding of how to make beats for your music videos after reading this article. If you want to make beats for your own music video, you can select from all the apps above, and Wondershare Filmora can be a good choice for you. Come on and join us!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Actually making beats to music videos is one of the best techniques to engage the viewer and adds to the whole video editing experience. Recently more and more people are interested in uploading music videos to Youtube. Videos perfectly synced to music beats gather more clicks, and it can also change the entire tempo and time signature. Finally your music video editing journey will take a whole new dimension with the help of beat making and you will be able to deliver something awesome to your viewers.

• Part 1: How to Make Beats in Wondershare Filmora
• Part 2: Best Music Beat-Making Software Alternatives

Part 1: How to Make Beats in Wondershare Filmora

Want to make beats for your music videos? You may need a helpful beat-making tool. One of the best bets is Wondershare Filmore. Its beat detection feature makes it a perfect fit for music videos. And this beat-making software also offers basic cutting& splitting features and a huge royalty-free library for your music videos.

Just download a free trial of Wondershare Filmora X and get started!

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Step 1: Import Source Videos and Music Files

Launch Filmora after download. You can simply just drag/drop or import the source videos and music that you need to make beats.

Step 2: Start Beat Detection

Right click the music file you want in the Media Library, select Beat Detection, and then Filmora will begin to detect the beats in the music file automatically. You can also go to the Audio tab and get 79 royalty-free music built in Filmora to make beats for your background music if you don’t have your source music.

Step 3: Drag and Drop Videos and Music to Timeline

Filmora might take a while to install the detection plugin, and then you will see a bear marker “b” on the thumbnail of the music file. This means the Filmora is done detecting the beats for the video you selected. Then it is time to drag and drop the video and music to the video and audio track respectively.

Step 4: Configure Your Own Beat Settings

Beat markers in red can be seen on the filmora on every four beats. This is the default configuration. Four beat markers responding to every hit.The settings can be changed by selecting the Beat Options from the right-click menu on the music file in the Media Library. A pop-up window will open where you can make the necessary changes.

Step 5: Sync Your Videos to the Music Beats

Now that you are done marking beats, you can accurately sync the video as per your requirement on the video tracks via per music beat on the audio track. This whole treatment will make the music video smoother and more structured.

Step 6: Save and export your edited project

After you finish all of your music video editing, you can click Export, select the format you want such as mp4 to export your music video. Filmora not only supports various video formats for the export, but also enables you to upload your music video to Youtube or Vimeo directly.

If you have any questions about the steps above when you try to make beats with Filmora or you want to make beats with different software, come on and get more detailed information on Best Beat-Making Tools . And you can also watch the tutorial video below make beats for your music videos.

Part 2: Best Music Beat-Making Software Alternatives

The diversity and abundance in different video editing projects spurs the development of different video editing software. Apart from Wondershare Filmora, here are some of other beat making apps for Smartphones, Mac and PC computers.

1. Final Cut Pro ($299.99)

Final Cut Pro allows the user to sync the beats to the video in many ways. Final Cut Pro does not allow direct addition of the beats but the app works in collaboration with the BeatMark X to help you add the beat markers to the audio you choose as the video soundtrack. This is all done in BeatMark X and then the user is allowed to create XML file then can be then exported to the Final Cut Pro.

The process of adding beats is quite simple. All you have to do is add the music to the timeline. Playback and punch the M key to add a marker on each beat. Then finally lineup the inserted clips.

Review: The platform does not allow an automated process for the addition of footage or creating cuts. And the price is not user friendly if you have a tight budget.

2. Premiere Elements ($59.99 as a single app)

Premiere Elements helps simplify the entire video-making process. Adding beats to the video is a simple task here. All you have to do is add the required audio file to the timeline and then make use of the beat detection. This adds markers to the entire track. The beat detection setting can be customized as per the requirement. The customization takes just a few moments.

Review: This feature can only be used in the expert view of the app only. The expert view app allows the user to add new markers just by punching the set bead maker option in the timeline.

3. Splice (Free, but offers in-app purchases)

Splice is one of the best available options for video editing in case you record lots and lots of videos on your iPad and iPhone. The app showcases all the required features that are needed to edit the videos like a pro. This app also features other editing tools that help to make cuts in the videos or applying filters to them. Splice syncs videos to the beats automatically and also add the transitions wherever required to make the video experience smoother. The app features a huge royalty-free music library and also a built-in voice recorder.

Review: The free version of the app offers very limited options and the user has to subscribe to monthly or annual subscriptions to enjoy the rest.

Conclusion

Making beats is of great importance, which can create magic when you work on a music video. Hopefully you may have a full understanding of how to make beats for your music videos after reading this article. If you want to make beats for your own music video, you can select from all the apps above, and Wondershare Filmora can be a good choice for you. Come on and join us!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: