New 2024 Approved Prime 10 Selection Accessible, No-Cost Acoustic Adjustment Services

Prime 10 Selection: Accessible, No-Cost Acoustic Adjustment Services

What is Audio Normalization, what are its different types, why do we need it and how to do it online? – these are the questions we might ask when first learning about it. Well, then, let’s answer all of them!

Audio Normalization means that the loudest parts of an audio signal are set to a specific value. For example, -18 dBFS (decibels relative to full scale). This is done so that all the parts of the sound mix remain at equal volume levels.

You can use this tool when mixing or editing your music, or during playback on your speakers. In the case of mixing, listen for any clipping (A form of waveform distortion - It sounds like the audio is starting to ‘break up,’ which is light distortion. The more severe it is, the more distorted the music begins to sound) that could occur in your mix. So, in this case, you need to normalize before it becomes too loud and needs more and more fixing. So, normalizing the audio kind of means balancing the volume of the track.

Mostly, audio normalizers are used for balancing out the volume of music, podcast, or other audio recordings. Whenever you have a variety of audio clips that would sound too loud or soft if listened to together, an audio normalizer helps you create a more cohesive listening experience. So, why, and when, do we need to normalize our tracks?

To make different music styles sound more cohesive;
To adjust the volume of podcast to be at a consistent level with one another
To remove sharp spikes in volume for consistent listening experience for our audiences

So, what are the types of audio normalization? Here you have it:

peak normalization - helps adjust the recording based on the highest signal level present in the recording;
loudness normalization - adjusts the recording based on perceived loudness;
RMS (Root-Mean-Square) - changes the value of all the samples, where their average electrical volume overall is a specified level.

So, say that if you are a creator and have listeners, with this tool, you can count on the expectation that people will more likely want to convert to being loyal subscribers, viewers and listeners. This is what happens when audiences feel their user experience is favored and they enjoy a good content – it makes them come back for more.

But sometimes you don’t have so much time that would allow you to find a software, download its installer, install it, learn how to navigate inside its interface, which might be totally new and in some cases, complicated for you, and learn how to normalize your audio files there. In this case, you might want to find the right tools which would enable you to reach your goal without even having to install anything – simple and fast!

Hence, for this case, we would like to offer you the list of 10 best free online audio normalizers. The list goes:

MP3 Gain Volume Changer
Sodaphonic
Audio Mass
Audio Online Convert
Audio Editor
fConvert Online Converter
Boost MP3 Volume
MP3Cut Change Volume
Audio Alter Volume Changer
Audio Trimmer Volume Booster

Therefore, let’s delve into each one of them, and learn how to use those online editors in our favor!

MP3 Gain Volume Changer

This online editor allows you to adjust the volume level of MP3 audio files fast – it can raise, lower, and normalize the volume level of your MP3 files.

The interface is simple and easy to use – exactly what you must be looking for. You can adjust the volume level to make the MP3 the way you want to listen to it.

One of the important things this app is letting you do is to upload from Google Drive or Desktop – it works locally without going through a server, and this means that MP3s do not need to be uploaded to any server.

So, go to this link . Click on Choose Files and find the audio clip you would like to normalize.

Now, once your audio track is added, head a little below and find the options you have.

Here, you can decide what do really do with your file: do you want to increase or decrease the volume? If you choose automatic normalization, the app will figure something out itself! And, look at the right side – in case you know well your decibels, you can choose how many decibels to apply. But the web-site itself says that 3.0 decibels is recommended, so it would be nice to just stick with it.

If you have multiple files and you want to normalize them all at once, click on Create MP3 (All); in case you have a lot of files and you would like to normalize one or more of them but not all, then your best choice would be Create MP3 (Selected). Another option is that you save your file on Google Drive.

When you Create your file(s), the normalized one(s) will appear under those buttons in Progress Log, and you can Play right away, or Download and listen to it later on.

Sodaphonic

Sodaphonic also lets you edit your audio files online. With the help of this editor, you can cut, copy, and paste sound segments of an audio. It offers you: normalizing audio, using audio effects, time-stretching, reversing audio, fade-in and fade-out – those tools are really helpful.

Sodaphonic is pretty interesting as the first thing that meets the eye is that it lets you not only pick or drop an audio file there, but record something new, too!

Any option you choose, then when proceeding into the editor, you will see your file waveform there. In order to normalize the audio, on the top left, find Edit, put a cursor on it, and you will see the menu appear. Find Normalize and click on it.

A little window will appear, where you need to fill in how many decibels should be set as the max peak.

Once you do this and click on Normalize, your file will now be affected, and you can also compare the waveform – it is now a little different, isn’t it?

So, when you are happy with the result, just go to File, and Choose Export.

Audio Mass

The Audio Mass editor will help you edit audio and waveforms over the web. There, you can load any audio format your browser supports, and apply many different audio effects (fading in, cutting, trimming…)

So, Audio Mass lets you: normalize audio, analyze frequency, signal distortion and peaking, trim, past, cut audio segments, reversing and inverting audio, convert to MP3, change of volume levels, fade in and fade out, audio compressor, adding reverb, delay, distortion.

When you go to the web-site , you can choose your desired file right away and the site will open it in a waveform. Now, the Normalize option is in the Effects (in the menu on the top). Click on it.

The window opened will show the option to Normalize Left and Right Equally, and it also doesn’t give you decibels – instead, you can choose the percentage on how you would like it to be normalized.

Then, surely, click on the Normalize Audio button and enjoy the result – the waveform itself will show you how different the file becomes…

Audio online convert

This is the tool mostly to be used to convert to different audio formats. In the process if converting audio, you will be able to normalize audio too, as well as change bitrate, sample rate, audio channels, and more.

Go to Audio Online Convert . Of course, click on Choose File and find the track you want to normalize.

Below, you have some settings you can work on, which we have already mentioned. So, if we focus on our article’s topic, you need to find the option Normalize audio, and check the box there. Then, click to Start and the web-site will work on the track according to what you decided to change there. You will have a little while your file is being processed.

So, when it is completed and your file is ready, just click on Download and you are ready to use it as you like.

Audio editor

The DikTorov Audio Editor is an online app to edit audio, normalize audio, or fade in / out audio. It offers: real-time editing and playback of audio files, supports all popular audio formats, and exports as WAV.

Go to the web-site , choose your file and drag it in the blue space in the center.

Now, find the blue Normalize Volume button on the top form the audio waveform, notice that on the right of it, you can change the dBs, and fill in your desired max peak decibel. Then, click on the button Normalize Volume, and the setting will be applied onto your track.

fConvert Online Converter

fConvert is an audio converter service that converts any audio file to any format. There, you can: normalize audio, change sample rate, change file format.

Go to the fConvert , Choose File from your computer, do the settings, and don’t forget to check in the box next to Normalize at the end of the settings.

For the conversion process to start, click on fConvert. Then, scroll down a little, and you’ll find that there is a Result you can already download!

Boost MP3 Volume

The MP3 Volume tool can increase or decrease the volume of any MP3 file online, change file from 1 to 25 decibels, and adjust one or both audio channels.

Open the web-site in your browser, select MP3 file, which should be no more than 150 MB, and take care of the settings.

So, as we mentioned, here you can increase or decrease the volume, and choose your desired max peak (3 decibels recommended everywhere!), and select channels – both or only right or left.

Then, click on Submit Now, wait a little while your file is being uploaded, and once it is finished, you will see the download link on the top of the settings box.

MP3Cut Change Volume

The volume changer app lets you increase audio volume while maintaining the original audio quality. It supports all audio file formats including MP3, M4A, WAV, M4R, FLAC… as an audio converter, it lets you save files in any desired format. Of course, it doesn’t require that you have any technical skills, just move the slider to adjust the volume. It’s very easy to use and offers unlimited file size.

Open MP3Cut , and click on Open file.

Now, instead of Normalize, in this case, you will have to look for the word Equalizer, which you can find in Audio Tools on the top menu. Click on it, wait, and you will see the sliders appear below the waveform of the track.

The sophisticated app also lets you choose the options to select the one most compatible with your audio track, such as: Default (it can be anything, surely), Classic, Dance, Laptop speakers, Live, Party, etc…

You can equalize your track by playing around with the sliders, and then save the result when you are satisfied with the result.

Audio Alter Volume Changer

You can raise or lower the volume of any audio file using this free online tool. Its main advantages are that it’s fast and easy to use, and supports MP4, WAV, FLAC, OGG.

After opening the web-site , now click on Browse computer button to select your file. It will prepare your file and as in most cases, the waveform will appear.

Below, there is a decibels line, where you can once again select your desired max peak dB.

After you have set your dB to the desired amount, click on Submit and wait while your file is being processed. After that, when the audio is converted, you can download it, and also, go back to the main page and edit another file.

Audio Trimmer Volume Booster

This is a free online audio file volume booster. With it, you can very easily increase the volume of songs and make your MP3s louder. Supported formats are: MP3, WAV, WMA, OGG, M4R, M4A, FLAC, AIFF.

Open the site , and find a black line where you will see the option to upload your track. Click on Choose File and select your desired track from your computer.

Now, on the right side under the black line where we uploaded our file, you can see the Loudness options. Click on it and choose from the following: Mild, Moderate, High, and Extreme. Once you have chosen, click on Boost Volume. It will process and in a few seconds, you will have your file ready for download!

Normalize audio in Wondershare Filmora X

Now, even though we already know 10 (which is a lot!) free online normalizers, and we really hope you will be able to choose among them and reach your goal in an easy way, it might be even better if we know some more about normalizing audios using a software.

It is almost as easy to use, but what if you need some more editing opportunities, and with a simple interface? – in this case, worth discussing is a software called Wondershare Filmora X , which helps us have a wonderful, and share-able results. (as the name itself suggests!) It is an actual video editor, and many people all around the world enjoy its presence, especially the ones who don’t want to use a program so sophisticated and complicated for them to require learning for months, but try to have some main editing tools at hand. Filmora operates on Mac and Windows, its interface is very easily understandable for beginners right away. It’s worth noting that not a long ago, Wondershare Filmora X introduced the feature to normalize the audio for the first time. So, go on, download the latest version of Filmora X, and follow along the detailed step by step guideline to normalize audio there For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Click and drag the video of which the audio you want to normalize. Select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

You will see that there is a kind of graphic before your eyes, and if you can see that the waveform is not so equal, you can be pretty sure without even listening, that the noises are so much different from each other, which makes us understand once more, how useful and sometimes, even necessary, audio normalization can be:

Select the files you want to balance, right-click and click on Adjust Audio. New panel will be opened on left top and there, you will see Auto Normalization appear – check the box next to it.

After you have clicked on it, wait until the normalization completes.

With it being done, all your audio clips will be normalized, you will now be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is not a noticeable difference between how they really sound. So, now you can just go and save the file you have just normalized!

So, in this article, we have learned about audio normalization, we have answered some questions about what it is, why and when do we need it, which are the 10 best online editors that will help us normalize our audio tracks without really wasting a lot of time and installing a software, but we also touched upon one software Wondershare Filmora X which can help us carry out the same task in no time. The best thing we can learn from this article is that there are just countless ways of doing one thing, and in today’s world, we are full of resources to reach our targets and aims. So, we hope this article helped you choose your favorite tool, and facilitate working on the audios for you – until next time For macOS 10.14 or later

Select the files you want to balance, right-click and click on Adjust Audio. New panel will be opened on left top and there, you will see Auto Normalization appear – check the box next to it.

After you have clicked on it, wait until the normalization completes.

Expert Suggestions for Enhancing Device’s Audiovisual Experience

When you use your device for listening to music, default audio profile of your device is just not good enough. This is because a default audio profile makes almost all types of music sound similar and you will never get to listen to the variations they have. That is where an equalizer comes into the scene. An equalizer is basically an audio filter or profile that has a certain setting for the frequencies of sound so that the music you are playing on your device sounds as good as originally recorded.

Whether you listen to music on your smartphone or your computer through speakers or headphones, an equalizer app is a necessity especially if you are an audiophile. That is why we have picked the best sound equalizer apps both for smartphones and computers where there are several music equalizer settings available to choose from.

1. Best Chrome Sound Equalizer Settings

If you are a Chrome browser user and you use online audio and video streaming platforms to play music, you must have Equalizer for Chrome Browser extension installed. The extension comes with 21 preset audio profiles that you can set instantly based on the music genre you are playing. Besides, you can customize the 10-band Equalizer as per your requirements.

Most importantly, it does not require heavy resources to run in the background unlike the desktop equalizer applications. The extension is completely free to use. Here are the steps how to use the extension for the best music equalizer settings for Google Chrome.

Step 1: On Google Chrome, visit “https://chrome.google.com/webstore/detail/equalizer-for-chrome-brow” .

Step 2: Click on Add To Chrome button and follow the on-screen instruction to install the extension successfully.

Step 3: Open your audio or video streaming platform on your browser and play the desired music.

Step 4: Open Equalizer for Chrome browser extension and select from preset equalizers or customizer as per your requirement and listen to the changes in real-time.

2. Best iPhone Equalizer Settings (https://apps.apple.com/us/app/equalizer-fx-bass-booster-app/id1084228340 )

Equalizer Fx - Bass Booster App is the most popular equalizer app for iPhones. It features a 7-band equalizer that you can customize as per your requirement. Besides, there is dynamic bass tuning option to enhance your listening experience. Moreover, it comes with a powerful bass boost effect if you love beats and bass on your music. The app has an advanced music layer and therefore, you do not need an external music player app.

There are over 15 preset filters available to choose from as you play music in the background to reflect the effects. You can keep your tracks on your device properly in an organized way for easy playing. Even though the app comes free, there is a subscription option available for advanced users to unlock more features and take their music listening experience to the next level.

3. Android Setting Equalizer for Best Sound (https://play.google.com/store/apps/details?id=com.devdnua.equalizer.free )

Equalizer FX - Sound Enhancer is a completely free app where you get as many as 12 preset equalizer settings for listening to different types of music with the best possible audio output. You can always tweak with the equalizer settings to get the perfect music you are looking for. The app features a loudness enhancer to amplify the volume on your device speaker or headphones without cracking it.

Moreover, you get a bass booster which is quite popular among music lovers. The app can also enhance the stereo effects for an immersive listening experience. The equalizer widget on the home screen makes it easy for users to operate the app. It automatically gets turned on and off when the music player starts and stops. The only drawback is that it does not work with radio.

4. Best Sound Equalizer for PC

Boom 3D is the most popular equalizer setting application among desktop users. The software is available for both Mac and Windows users. It is extremely popular for creating 3D surround effect in advanced speakers and headphones. The software has the most accurate and useful equalizer presets such as gaming, old songs, regular, vocals and much more.

Most importantly, it features an 11-band equalizer setting to customize as per your requirement. You can turn on and off the equalizer instantly and you can tweak with different audio parameters such as pitch, ambience, fidelity and much more. You can get a free trial after which you have to upgrade to its premium version. Here are the steps to use Boom 3D sound equalizer Windows 10 and macOS to get the best settings for equalizer.

Step 1: Download and install Boom 3D on your PC based on your operating system. Open the application and sign up to get started.

Step 2: If you are using headphones, select your headphone type for better results.

Step 3: Go to Equalizer tab and set any preset equalizer setting as per your requirement.

Step 4: Go to Advanced tab top customizer equalizer and the changes will reflect if you are playing anything on the background.

Bonus: How To Get The Best Setting For Equalizer For Any Audio File

If you have downloaded any audio or video file and you want to change the audio profile of the file by customizing its equalizer settings, you need a professional video editor with audio editing feature. We recommend Wondershare Filmora where you can enhance the sound profile of any audio or video file using equalizer settings as well as customize equalizer settings as per your requirements. Here are the steps to use Filmora to apply preset equalizer as well as customize equalizer.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora on your Mac or Windows PC.

Step 2: Select New project and go to File > Import Media and click on Import Media Files.

Step 3: Select the audio or the video file that you want to work with and then drag the file from Project Media to Timeline.

Step 4: Double-click on the file from the Timeline and go to Audio tab.

Step 5: Select from preset equalizers. You can also click on Customize button and make modifications as you think appropriate.

Conclusion –

We have provided you with the best apps with the best settings for equalizer. You can choose from the preset equalizer settings as well as customize and make your own equalizer settings. If you do not want to download any app and you are listening to music on your Chrome browser, you can use the browser extension. If you want permanent changes in equalizer settings to any downloaded audio or video, we recommend Wondershare Filmora for the best result.

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora on your Mac or Windows PC.

Step 2: Select New project and go to File > Import Media and click on Import Media Files.

Step 3: Select the audio or the video file that you want to work with and then drag the file from Project Media to Timeline.

Step 4: Double-click on the file from the Timeline and go to Audio tab.

Step 5: Select from preset equalizers. You can also click on Customize button and make modifications as you think appropriate.

Conclusion –

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora on your Mac or Windows PC.

Step 2: Select New project and go to File > Import Media and click on Import Media Files.

Step 3: Select the audio or the video file that you want to work with and then drag the file from Project Media to Timeline.

Step 4: Double-click on the file from the Timeline and go to Audio tab.

Step 5: Select from preset equalizers. You can also click on Customize button and make modifications as you think appropriate.

Conclusion –

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora on your Mac or Windows PC.

Step 2: Select New project and go to File > Import Media and click on Import Media Files.

Step 3: Select the audio or the video file that you want to work with and then drag the file from Project Media to Timeline.

Step 4: Double-click on the file from the Timeline and go to Audio tab.

Step 5: Select from preset equalizers. You can also click on Customize button and make modifications as you think appropriate.

Conclusion –

Optimizing Listening Comfort by Fast-Tracking Audio Speed Adjustments

If you have a music file, and you notice that it is a bit slow or fast, making the entire ambiance kind of dull or overly exciting respectively, you can change audio speed to get the track right as per your mood. However, when you make any such adjustments, some unwanted effects can be experienced, such as format limitations while exporting, changes in the pitch of the sound, etc.

That said, here, you will learn how to change audio speed with the least adverse effects using some of the most popular and highly recommended tools.

How to Change Audio Speed in Filmora

Being a lightweight and less resource-intensive post-production tool, Filmora is admired by several professionals across the globe and is many times preferred over other editing programs like Adobe Premiere Pro and Final Cut Pro X. Easy-to-understand UI and large-sized, clearly visible options and buttons are what make Filmora extremely popular among those who are new to the industry and don’t have a computer with a powerful processor, gigantic memory, and enormous GPU.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the steps given below to learn how to change audio speed with Wondershare Filmora:

Step 1: Import Audio and Add to Filmora Timeline

Launch Filmora on your Windows or Mac computer, make sure that the Media icon is selected from the standard toolbar at the top, click the + icon in the Media (also referred to as Library here) window (on Mac) or anywhere in the Media window itself (on Windows) from the upper-left corner of the interface, and import the audio file that you want to manage the playback speed of. Next, drag the media file from the Library to the timeline.

Step 2: Increase or Decrease Audio Speed

Ensure that the audio track is selected in the timeline. Click the Speedometer icon from the timeline toolbar at the upper section, hover mouse to the Slow option from the menu, and click your preferred value form the submenu to reduce the sound speed. Likewise, hover the mouse to the Fast option, and choose a value from the submenu to increase it.

Note: Usually, the audio pitch wouldn’t change as long as you pick the values anywhere between 0.5x and 5x. However, if you select any option beyond this range, you may experience variations in the pitch according the value you selected.

Step 3: Set Custom Speed or Reverse the Audio

Click the Speedometer icon from above the timeline, and click Custom Speed from the menu. Use the slider to slow down (move to the left) or speed up (move to the right) the audio on the Custom Speed box. Alternatively, you can manually enter your preferred value in the available field for granular control. In addition, you can also check the Reverse Speed box to reverse the audio if need be.

Step 4: Export the Output

Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box that opens next, select your preferred audio format from the Format list in the left, make necessary customizations from the right pane, and click EXPORT from the bottom-right corner of the box to export the audio with the modified speed.

How to Change the Speed of Audio with Video in Filmora

The process to change audio speed that also has a video is identical to what is explained in the previous section. The only additional step required in this case is separating the audio track from that of video.

You can learn how to get this done by following the instructions given below:

Step 1: Import File to Media Window and then Add to Timeline

Use the method explained in Step 1 of the previous section to import a file to Filmora, drag the media to the timeline, and click MATCH TO MEDIA when the Project Setting box appears and prompts for confirmation. Note: Except for the Project Setting box, the rest of the process for adding audio and video files to the timeline is the same.

Step 2: Separate Audio from Video

Select and then right-click the video track with audio in the timeline, and click Detach Audio from the context menu.

Step 3: Adjust the Audio Speed

After the audio is detached, you can select the audio track and follow the method explained in the previous section to adjust its speed as needed. As for the video, you can use the trimming and cropping options to adjust its duration and size and export the entire project as explained in Step 4 of the previous section. Note: To export the project as video, all you need to do is, choose a video format like MP4 or something similar to that when on the Export box.

How to Change Audio Speed without Changing Pitch in Audacity for Free

One of the most downloaded, used, and admired applications, Audacity, is an open-source and free audio editing software available for Windows, Mac, and Linux computers in both x32 and x64 variants. The software has all the professionals’ tools for basic to advanced sound editing to produce industry-standard outputs.

You can follow the steps given below to learn how to change audio speed with Audacity without changing the pitch of the sound:

Launch Audacity
Click File
Go to Import > Audio

Import the audio you want to speed up or slow down
Press Ctrl + A on the keyboard to select the whole audio track
Go to the Effect menu
Click Change Tempo

In the Percent Change field, enter a value with or without minus (-) to reduce or increase the tempo of the audio respectively.

Click OK
Go to file> Export
Select your preferred option from the submenu to export the modified audio as needed

Note: Changing the tempo usually doesn’t change the pitch of the audio up to some extent. However, you can expect some variations in the pitch if the new tempo value is too high or too low.

Conclusion

You may want to slow down or speed up audio if the existing one is not up to the mark, and you wish to manage the ambiance with the help of the music track either while playing a video or when merely a soundtrack is to be played during some event. In either case, the best tool for all your needs is Wondershare Filmora, and if you are looking for a program dedicated to audio only, Audacity is something worth trying.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the steps given below to learn how to change audio speed with Wondershare Filmora: