Enhancing Listening Experience: Steps for Standardizing Audio Amplitude in VLC

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Hollywood Hues: Celebrity Tone Modification Gadgets, Step-by-Step Instructions and Diverse Options

How entertaining would it be to sound like your favorite celebrity? Imagine if you could sound like Barack Obama, how exciting would it be! If this sounds impossible to you, let us surprise you and introduce Celebrity Voice Changer that can change your voice and make you sound like any celebrity within seconds.

The voice changer offers a wide variety of unique features and a lot of celebrity voice effects. This makes Celebrity Voice Changer a must-try application. To learn more about it, read the article below.

Part 1. Introduction and Key Features of Celebrity Voice Changer

Celebrity Voice Changer is a fantastic voice changer that offers celebrity voice effects, and it can instantly change your voice to your favorite celebrity voice. New voice effects are regularly added to Celebrity Voice Changer.

If you ever want to sound like your favorite singer, hero, or any celebrity, this voice-changing application is the best possible way. A lot of people like to use Celebrity Voice Changer because of its extensive features. Do you want to learn about its features? Let’s get started!

· Interface

Have you ever used Celebrity Voice Changer before? Don’t worry if you have not because using the voice changer is not difficult at all. The application has a very clean and straightforward interface; users don’t need any assistance to use it as the application itself guides the users for the next step.

· Voice Effects

Is Ariana Grande your favorite singer? Or do you like Michel Jackson or Harry Styles? You might also be a Donald Trump fan? Like this, you can get many more celebrity voice effects with Celebrity Voice Changer and have fun. Not to forget, we all love Breaking Bad and Bryan Cranston.

· System Requirements

The voice-changing application is available for both Android and iOS devices. For using Celebrity Voice Changer, you only need a strong internet connection. The application is free to use, and interestingly, you don’t even need to Sign-In to use it.

· Voice Quality

Unlike other voice changers, Celebrity Voice Changer promises to maintain the original voice quality. If you change your voice with any other ordinary voice changer, it changes the pitch and speed of your voice. Additionally, they dry your voice and add a horrible echo effect, whereas Celebrity Voice Changer delivers the best and exact voice quality.

Part 2: How to Use Celebrity Voice Changer on iPhone and Android?

Celebrity Voice Changer is a brilliant voice-changing application that can instantly change your voice to your favorite celebrity, which in return makes you smile. The application is a great choice for both Android and iPhone users whenever they are bored. The only problem someone faces is that they don’t know how to use the voice changer. If this is the scenario, allow us to help you by sharing the steps to use Celebrity Voice Changer.

Steps to use Celebrity Voice Changer on iPhone

Step 1: To use the application, install it from App Store and then launch it. The main screen of the application shows all the celebrity voices it offers.

Step 2: You can select your favorite celebrity voice effect by clicking on it. You can use both the front and back camera of your iPhone to record your voice. For recording, press and hold the celebrity button and start speaking.

Step 3: After you are done, release the button. The application will take a few seconds to change your voice. Once it’s done, you will be able to listen to your modified celebrity voice.

Step 4: Lastly, you can save the file to your respective device or else share it with your friends on your favorite social media platform. Not just this, the application also lets you change the text.

Steps to use Celebrity Voice Changer on Android

Step 1: Start by installing Celebrity Voice Changer from Play Store, then launch it on your Android device. The home page of the voice changer shares all the celebrity voice effects; you have to select your favorite voice effect.

Step 2: The home screen shares a ‘Microphone’ button on the top of the screen; you have to press and hold that button to start recording your voice.

Step 3: Once done, hit the ‘Play’ button from the screen. The voice changer will take a few seconds to process your voice and change it to the celebrity voice you selected earlier.

Step 4: If you are satisfied with the modified voice, download it from the ‘Download’ button, available on the screen. Or else, the voice changer also offers you to share the file with your friends and family for fun.

Part 3: 3 Nice Celebrity Voice Changer Alternatives

No doubt Celebrity Voice Changer is a great choice for unlimited fun and entertainment, but there are some other voice changers as well that have to offer a lot. If you are interested in learning about 3 nice alternatives for Celebrity Voice Changer, then let’s start!

1. Funny Voice Effects & Changer

Don’t wait if you want to have fun, instead use Funny Voice Effects & Changer to laugh. You can sound like an alien, robot, ghost if you want to or else, whatever you like because the voice changer application has dozens of funny voice effects.

Not just this, you can also record a video with Funny Voice Effects & Changer and later edit your videos with cool effects like Glitch, VHS, etc. Do you know what you get after the subscription update? Well, you get to use the application without limits; you can unlock all the voices. Additionally, you get weekly updates.

2. Voicer – Celebrity Voice Changer Prank Meme Videos

Voicer is another nice alternative for Celebrity Voice Changer with a long list of features. Interestingly, the application also provides pranks that are recorded by professional voice actors. You get new pranks with this voice changer as new pranks are added after every few days.

Voicer offers a wide list of actors and celebrities that you can select from. Moreover, the application supports various languages and has international coverage. Have you ever heard about Karaoke? Well, Voicer also offers Karaoke, and it automatically syncs Vocal and Karaoke so that you can enjoy singing along it.

3. Famous Voice Changer

Famous Voice Changer is a great application whenever you talk about voice changers. It comes with dozens of voice effects that you can use to sound like your favorite actor or celebrity. The application is also ideal for pranking and trolling your friends.

You just have to press and hold the button while you speak; the application does the remaining magic to modify your voice. If you get the Premium plan, you can have access to many more celebrity effects, new voice releases, and also unlimited usage.

Last Words

If you are bored, try Celebrity Voice Changer to have some fun. If you have never used the application before, the article is a complete guide that talks about features and detailed steps about how to use the voice changer. We also shared a few good alternatives for the application.

If you are interested in learning about a nice video editor, keep reading as we are about to share some information regarding Wondershare Filmora . This is an all-in-one software that offers a whole editing world and much more than that.

You can edit your videos with features like trim, crop, cut, join, etc. Some other cool features like the color match, keyframing, split-screen, motion tracking are also offered. Moreover, you also get some great sound effects from Wondershare Filmstock, the media library of Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Use Celebrity Voice Changer on iPhone and Android?

03 3 Nice Celebrity Voice Changer Alternatives

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later