Audio Harmony in Editing: Perfecting the Dance Between Music and Visuals in Final Cut Pro X

How to Edit the Beat and Sync Videos to Music in Final Cut Pro X

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Click here

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Enhancing Accessibility: Documenting Computer Audio in Audacity

In modern times, it has become a common practice to record your audio files. This is usually beneficial for many purposes. Be it for business meetings, podcasts, or just an informative lecture you have taken down. You will always need to record computer audio from time to time in the year 2022.

Over the past decade or so, computer users have recorded their audio and converted it into a digital format with relative ease. However, users look to record computer audio at even the highest quality levels. And while the technology needed to achieve this is readily available in both software and hardware forms, it can be somewhat complex.

If you want to record any sound or audio on your computer, this article is meant for you. Whether you are looking to do a voice-over on a video or just want to record some random audio notes, you can easily make it happen. This article will guide you to record your computer audio using a PC easily. We will share different methods using which you can record computer audio.

This article is not directed at potential audio recorders but rather at those looking to improve the audio quality of their recordings. Users will already have their microphone and recording equipment, yet they may find this article useful.

Recording Voice On Windows

If you are using a pc or desktop, then keep in mind that most operating systems have their own default recording software that comes pre-installed. Most people don’t know about them, and they rush for 3rd party applications for sound recording purposes. It doesn’t matter if you use Windows 7, 8, 10, or 11. Windows operating system also has its recorder app. It will be available on your system, and all you need to do is find it and use it. If you are unsure how to do that, then follow the steps given below.

1. Go to the search options of your windows and type “Voice Recorder” in it.
2. Click on the search button, and the voice recorder app will appear in the top searches.

1. Just open the app, and a recording button will appear on the screen. All you need to do is, click on the recording icon, and it will start recording your audio from your microphone, and when you are done recording, you click on the stop recording button, and it will automatically be saved on your computer.

Recording Voice On Mac

If you are using Mac operating system, then it also has its recording app. Just follow the steps given below:

Recordings can be created using the built-in microphone, an external microphone, or a headset with a supported microphone. If you’re signed in with the same Apple ID on your iPad, iPhone, or Mac, you can listen to your Voice Memos recordings on any of those devices.

1. Click on the Record button (or use the Touch Bar) inside the Voice Memos app on your Mac.
2. By clicking the Pause button, you can pause the video. You can resume the video by clicking Resume.
3. At the bottom of the page, click Done when you are finished.

Record Voice Using Audacity

Although you can record the computer audio using built-in tools, many 3rd party tools like Audacity provide you with more features and better quality than the built-in tools. To use Audacity for recording your pc audio, follow the steps given below.

1. First of all, you need to download the audacity software to your pc. Different versions of Audacity are available for different operating systems. So, you can try searching “audacity windows 7”, “audacity windows 8”, “audacity windows 10”, or “audacity mac” depending upon the operating system you are using.
2. Once it is installed, run the software, and its interface will appear on your screen.
3. Now you’ll need to customize the drop-down boxes above the timeline. The farthest thing on the left should be ‘Windows WASAPI’. From the next choice to the right, choose ‘Speakers (Realtek(R) Audio) (loopback)’.
4. It’s important to set the Recording Channel to 2 (Stereo). Otherwise, an error message will likely appear. Verify that the output device is set to the appropriate speakers
5. Once you have finished, click the red circle on top of your screen, and Audacity will record the audio that comes out of your speakers. If no audio is detected, the recording will be automatically paused. You can also stop by hitting the grey stop button at the top at any time
6. Audio editing tools like Audacity allow you to edit your recording after recording it and export it in several formats based on what you recorded.

Final Verdict

That’s how it works. Here are two easy ways to record the audio coming from your PC. Record internal audio (such as what comes out of your microphone) with Windows/Mac 10’s built-in ‘Voice Recorder’ app or Audacity. These applications are both extremely simple to use. To get the best audio quality, we recommend trying our Filmora Audio tools. Although Audacity does the job pretty well with filmora audio tools and voice packs, you can add many voice effects and edit your audio professionally. Give it a try as it is free to use.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Over the past decade or so, computer users have recorded their audio and converted it into a digital format with relative ease. However, users look to record computer audio at even the highest quality levels. And while the technology needed to achieve this is readily available in both software and hardware forms, it can be somewhat complex.

If you want to record any sound or audio on your computer, this article is meant for you. Whether you are looking to do a voice-over on a video or just want to record some random audio notes, you can easily make it happen. This article will guide you to record your computer audio using a PC easily. We will share different methods using which you can record computer audio.

This article is not directed at potential audio recorders but rather at those looking to improve the audio quality of their recordings. Users will already have their microphone and recording equipment, yet they may find this article useful.

Recording Voice On Windows

If you are using a pc or desktop, then keep in mind that most operating systems have their own default recording software that comes pre-installed. Most people don’t know about them, and they rush for 3rd party applications for sound recording purposes. It doesn’t matter if you use Windows 7, 8, 10, or 11. Windows operating system also has its recorder app. It will be available on your system, and all you need to do is find it and use it. If you are unsure how to do that, then follow the steps given below.

1. Go to the search options of your windows and type “Voice Recorder” in it.
2. Click on the search button, and the voice recorder app will appear in the top searches.

1. Just open the app, and a recording button will appear on the screen. All you need to do is, click on the recording icon, and it will start recording your audio from your microphone, and when you are done recording, you click on the stop recording button, and it will automatically be saved on your computer.

Recording Voice On Mac

If you are using Mac operating system, then it also has its recording app. Just follow the steps given below:

Recordings can be created using the built-in microphone, an external microphone, or a headset with a supported microphone. If you’re signed in with the same Apple ID on your iPad, iPhone, or Mac, you can listen to your Voice Memos recordings on any of those devices.

1. Click on the Record button (or use the Touch Bar) inside the Voice Memos app on your Mac.
2. By clicking the Pause button, you can pause the video. You can resume the video by clicking Resume.
3. At the bottom of the page, click Done when you are finished.

Record Voice Using Audacity

Although you can record the computer audio using built-in tools, many 3rd party tools like Audacity provide you with more features and better quality than the built-in tools. To use Audacity for recording your pc audio, follow the steps given below.

1. First of all, you need to download the audacity software to your pc. Different versions of Audacity are available for different operating systems. So, you can try searching “audacity windows 7”, “audacity windows 8”, “audacity windows 10”, or “audacity mac” depending upon the operating system you are using.
2. Once it is installed, run the software, and its interface will appear on your screen.
3. Now you’ll need to customize the drop-down boxes above the timeline. The farthest thing on the left should be ‘Windows WASAPI’. From the next choice to the right, choose ‘Speakers (Realtek(R) Audio) (loopback)’.
4. It’s important to set the Recording Channel to 2 (Stereo). Otherwise, an error message will likely appear. Verify that the output device is set to the appropriate speakers
5. Once you have finished, click the red circle on top of your screen, and Audacity will record the audio that comes out of your speakers. If no audio is detected, the recording will be automatically paused. You can also stop by hitting the grey stop button at the top at any time
6. Audio editing tools like Audacity allow you to edit your recording after recording it and export it in several formats based on what you recorded.

Final Verdict

That’s how it works. Here are two easy ways to record the audio coming from your PC. Record internal audio (such as what comes out of your microphone) with Windows/Mac 10’s built-in ‘Voice Recorder’ app or Audacity. These applications are both extremely simple to use. To get the best audio quality, we recommend trying our Filmora Audio tools. Although Audacity does the job pretty well with filmora audio tools and voice packs, you can add many voice effects and edit your audio professionally. Give it a try as it is free to use.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Over the past decade or so, computer users have recorded their audio and converted it into a digital format with relative ease. However, users look to record computer audio at even the highest quality levels. And while the technology needed to achieve this is readily available in both software and hardware forms, it can be somewhat complex.

If you want to record any sound or audio on your computer, this article is meant for you. Whether you are looking to do a voice-over on a video or just want to record some random audio notes, you can easily make it happen. This article will guide you to record your computer audio using a PC easily. We will share different methods using which you can record computer audio.

This article is not directed at potential audio recorders but rather at those looking to improve the audio quality of their recordings. Users will already have their microphone and recording equipment, yet they may find this article useful.

Recording Voice On Windows

If you are using a pc or desktop, then keep in mind that most operating systems have their own default recording software that comes pre-installed. Most people don’t know about them, and they rush for 3rd party applications for sound recording purposes. It doesn’t matter if you use Windows 7, 8, 10, or 11. Windows operating system also has its recorder app. It will be available on your system, and all you need to do is find it and use it. If you are unsure how to do that, then follow the steps given below.

1. Go to the search options of your windows and type “Voice Recorder” in it.
2. Click on the search button, and the voice recorder app will appear in the top searches.

1. Just open the app, and a recording button will appear on the screen. All you need to do is, click on the recording icon, and it will start recording your audio from your microphone, and when you are done recording, you click on the stop recording button, and it will automatically be saved on your computer.

Recording Voice On Mac

If you are using Mac operating system, then it also has its recording app. Just follow the steps given below:

Recordings can be created using the built-in microphone, an external microphone, or a headset with a supported microphone. If you’re signed in with the same Apple ID on your iPad, iPhone, or Mac, you can listen to your Voice Memos recordings on any of those devices.

1. Click on the Record button (or use the Touch Bar) inside the Voice Memos app on your Mac.
2. By clicking the Pause button, you can pause the video. You can resume the video by clicking Resume.
3. At the bottom of the page, click Done when you are finished.

Record Voice Using Audacity

Although you can record the computer audio using built-in tools, many 3rd party tools like Audacity provide you with more features and better quality than the built-in tools. To use Audacity for recording your pc audio, follow the steps given below.

1. First of all, you need to download the audacity software to your pc. Different versions of Audacity are available for different operating systems. So, you can try searching “audacity windows 7”, “audacity windows 8”, “audacity windows 10”, or “audacity mac” depending upon the operating system you are using.
2. Once it is installed, run the software, and its interface will appear on your screen.
3. Now you’ll need to customize the drop-down boxes above the timeline. The farthest thing on the left should be ‘Windows WASAPI’. From the next choice to the right, choose ‘Speakers (Realtek(R) Audio) (loopback)’.
4. It’s important to set the Recording Channel to 2 (Stereo). Otherwise, an error message will likely appear. Verify that the output device is set to the appropriate speakers
5. Once you have finished, click the red circle on top of your screen, and Audacity will record the audio that comes out of your speakers. If no audio is detected, the recording will be automatically paused. You can also stop by hitting the grey stop button at the top at any time
6. Audio editing tools like Audacity allow you to edit your recording after recording it and export it in several formats based on what you recorded.

Final Verdict

That’s how it works. Here are two easy ways to record the audio coming from your PC. Record internal audio (such as what comes out of your microphone) with Windows/Mac 10’s built-in ‘Voice Recorder’ app or Audacity. These applications are both extremely simple to use. To get the best audio quality, we recommend trying our Filmora Audio tools. Although Audacity does the job pretty well with filmora audio tools and voice packs, you can add many voice effects and edit your audio professionally. Give it a try as it is free to use.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Over the past decade or so, computer users have recorded their audio and converted it into a digital format with relative ease. However, users look to record computer audio at even the highest quality levels. And while the technology needed to achieve this is readily available in both software and hardware forms, it can be somewhat complex.

If you want to record any sound or audio on your computer, this article is meant for you. Whether you are looking to do a voice-over on a video or just want to record some random audio notes, you can easily make it happen. This article will guide you to record your computer audio using a PC easily. We will share different methods using which you can record computer audio.

This article is not directed at potential audio recorders but rather at those looking to improve the audio quality of their recordings. Users will already have their microphone and recording equipment, yet they may find this article useful.

Recording Voice On Windows

If you are using a pc or desktop, then keep in mind that most operating systems have their own default recording software that comes pre-installed. Most people don’t know about them, and they rush for 3rd party applications for sound recording purposes. It doesn’t matter if you use Windows 7, 8, 10, or 11. Windows operating system also has its recorder app. It will be available on your system, and all you need to do is find it and use it. If you are unsure how to do that, then follow the steps given below.

1. Go to the search options of your windows and type “Voice Recorder” in it.
2. Click on the search button, and the voice recorder app will appear in the top searches.

1. Just open the app, and a recording button will appear on the screen. All you need to do is, click on the recording icon, and it will start recording your audio from your microphone, and when you are done recording, you click on the stop recording button, and it will automatically be saved on your computer.

Recording Voice On Mac

If you are using Mac operating system, then it also has its recording app. Just follow the steps given below:

Recordings can be created using the built-in microphone, an external microphone, or a headset with a supported microphone. If you’re signed in with the same Apple ID on your iPad, iPhone, or Mac, you can listen to your Voice Memos recordings on any of those devices.

1. Click on the Record button (or use the Touch Bar) inside the Voice Memos app on your Mac.
2. By clicking the Pause button, you can pause the video. You can resume the video by clicking Resume.
3. At the bottom of the page, click Done when you are finished.

Record Voice Using Audacity

Although you can record the computer audio using built-in tools, many 3rd party tools like Audacity provide you with more features and better quality than the built-in tools. To use Audacity for recording your pc audio, follow the steps given below.

1. First of all, you need to download the audacity software to your pc. Different versions of Audacity are available for different operating systems. So, you can try searching “audacity windows 7”, “audacity windows 8”, “audacity windows 10”, or “audacity mac” depending upon the operating system you are using.
2. Once it is installed, run the software, and its interface will appear on your screen.
3. Now you’ll need to customize the drop-down boxes above the timeline. The farthest thing on the left should be ‘Windows WASAPI’. From the next choice to the right, choose ‘Speakers (Realtek(R) Audio) (loopback)’.
4. It’s important to set the Recording Channel to 2 (Stereo). Otherwise, an error message will likely appear. Verify that the output device is set to the appropriate speakers
5. Once you have finished, click the red circle on top of your screen, and Audacity will record the audio that comes out of your speakers. If no audio is detected, the recording will be automatically paused. You can also stop by hitting the grey stop button at the top at any time
6. Audio editing tools like Audacity allow you to edit your recording after recording it and export it in several formats based on what you recorded.

Final Verdict

That’s how it works. Here are two easy ways to record the audio coming from your PC. Record internal audio (such as what comes out of your microphone) with Windows/Mac 10’s built-in ‘Voice Recorder’ app or Audacity. These applications are both extremely simple to use. To get the best audio quality, we recommend trying our Filmora Audio tools. Although Audacity does the job pretty well with filmora audio tools and voice packs, you can add many voice effects and edit your audio professionally. Give it a try as it is free to use.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Also read: