Mastering Volume Control: The Art of Audio Ducking with PowerDirector

How to Use Audio Ducking to Fade Out Music in PowerDirector?

Benjamin Arango

Oct 26, 2023• Proven solutions

“Can you explain to us the simple method to execute audio ducking?”

I hope you’re already aware of the audio ducking feature if you’re into video editing or any music industry. The audio ducking is commonly to balance two audios. You can see the very typical application while balancing the background music with the person speaking there. So, the different voices would pop up and needs an adjustment according to the scenario. However, selecting the most straightforward process and genuine video editor is the user’s responsibility to get the task done effectively. So, here, we would like to discuss the audio ducking function of CyberLink PowerDirector along with a suitable alternative - Wondershare Filmora.

Part 1: How to Use Audio Ducking to Fade Out Music in PowerDirector?

CyberLink PowerDirector is a video editing software with impeccable features, including Motion Tracking, Magic Movie Wizard, Encoding, Action Camera Tools, and so on. The audio ducking element in PowerDirector has automated the audio adjustment in terms of keyframes.

So, let’s consider the below steps to fade out music or fade out audio in PowerDirector audio ducking!

Step 1: Import Video

Open the CyberLink PowerDirector application, and import the video into the timeline, as shown below. Then, you can also import the background music you’d like to add to the video.

Step 2: Select Audio Ducking

Choose the background music and hit the “Audio Ducking” option from the Tools tab.

Step 3: Confirm the Audio Ducking

A pop-up audio ducking window like the below interface will appear to state that PowerDirector will automatically analyze the music.

All you need, is to hit the OK button and lend the job to PowerDirector.

Doing so will automatically add the keyframes into the background music you’ve already imported.

So, this was the entire process of music ducking keyframes automation in CyberLink PowerDirector.

Part 2: An Alternative Solution to Audio Ducking on Mac

If you’re looking for easiness, you must consider the following section for a suitable alternative!

“Which audio ducking software is the best for Mac?”

The Wondershare Filmora is not only suitable for Mac users but Windows users as well. Here are some of its features on why we used to admire Filmora for easiness and professionalism. Used by vlogger, make-up artists, and professional video editors for tutorials, editing, voice/audio editing, and after effects, Wondershare Filmora is the best choice to give a try today.

• The best part about the Wondershare Filmora is the versatility of audio editing tools.
• The window of the Audio Ducking is super intuitive and self-explanatory to the users.
• Want to go advanced? You should admire its features, including Advanced Color Tuning, Scene Detection, Green Screen, Color Match, Motion Tracking, Animation Keyframing, and so on.

All in all, the Wondershare Filmora is a remarkable video editor fulfilling the needs of endless people around the globe. It’s usually the first name in mind when it comes to innovation and simplicity.

Here is a step-by-step tutorial after which you can compare the audio ducking easiness of Wondershare Filmora with CyberLink PowerDirector.

So, let’s start without further ado!

Step 1: Install Wondershare Filmora

Click on the Try It Free button above to download and install Wondershare Filmora. Once the software installation is complete, launch it.

Step 2: Import the Video

Choose “New Project” from the primary interface, and now, go to the “Import” option to add or import the media files. You can also do a drag-and-drop.

Step 3: Select the Audio Option

Double-click the video or right-click the audio to choose the “Adjust Audio” option on the timeline that will lead you to the editing window.

Step 4: Employ Audio Ducking

You are almost there whereby tick the “Lower the volume of other clips” checkbox to proceed. Using the slider, swipe it to set the degree to which you want to lower the volume of background music.

So, these simple steps are required to enable audio ducking in Wondershare Filmora. So easy! Along with it, you can also consider using the Fade Out and Pitch slider tab for versatile audio adjustment. However, you must only check for the Ducking tab, especially when you’re a beginner and don’t want to go for extreme changes.

Conclusion

Thus, with a discussion over two different ways to implement the audio ducking feature, it’s time to state our final overview. No doubt, the PowerDirector audio ducking feature offers the simplistic way, but it lacks flexibility. Due to the keyframe setting’s automation, you can’t check for a specific part in the audio and adjust the volume as per your needs. However, this could have been done pretty quickly in Wondershare Filmora’s video editor, making it the best alternative to CyberLink PowerDirector. Keeping it the top priority, begin your journey today!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

“Can you explain to us the simple method to execute audio ducking?”

I hope you’re already aware of the audio ducking feature if you’re into video editing or any music industry. The audio ducking is commonly to balance two audios. You can see the very typical application while balancing the background music with the person speaking there. So, the different voices would pop up and needs an adjustment according to the scenario. However, selecting the most straightforward process and genuine video editor is the user’s responsibility to get the task done effectively. So, here, we would like to discuss the audio ducking function of CyberLink PowerDirector along with a suitable alternative - Wondershare Filmora.

Part 1: How to Use Audio Ducking to Fade Out Music in PowerDirector?

CyberLink PowerDirector is a video editing software with impeccable features, including Motion Tracking, Magic Movie Wizard, Encoding, Action Camera Tools, and so on. The audio ducking element in PowerDirector has automated the audio adjustment in terms of keyframes.

So, let’s consider the below steps to fade out music or fade out audio in PowerDirector audio ducking!

Step 1: Import Video

Open the CyberLink PowerDirector application, and import the video into the timeline, as shown below. Then, you can also import the background music you’d like to add to the video.

Step 2: Select Audio Ducking

Choose the background music and hit the “Audio Ducking” option from the Tools tab.

Step 3: Confirm the Audio Ducking

A pop-up audio ducking window like the below interface will appear to state that PowerDirector will automatically analyze the music.

All you need, is to hit the OK button and lend the job to PowerDirector.

Doing so will automatically add the keyframes into the background music you’ve already imported.

So, this was the entire process of music ducking keyframes automation in CyberLink PowerDirector.

Part 2: An Alternative Solution to Audio Ducking on Mac

If you’re looking for easiness, you must consider the following section for a suitable alternative!

“Which audio ducking software is the best for Mac?”

The Wondershare Filmora is not only suitable for Mac users but Windows users as well. Here are some of its features on why we used to admire Filmora for easiness and professionalism. Used by vlogger, make-up artists, and professional video editors for tutorials, editing, voice/audio editing, and after effects, Wondershare Filmora is the best choice to give a try today.

• The best part about the Wondershare Filmora is the versatility of audio editing tools.
• The window of the Audio Ducking is super intuitive and self-explanatory to the users.
• Want to go advanced? You should admire its features, including Advanced Color Tuning, Scene Detection, Green Screen, Color Match, Motion Tracking, Animation Keyframing, and so on.

All in all, the Wondershare Filmora is a remarkable video editor fulfilling the needs of endless people around the globe. It’s usually the first name in mind when it comes to innovation and simplicity.

Here is a step-by-step tutorial after which you can compare the audio ducking easiness of Wondershare Filmora with CyberLink PowerDirector.

So, let’s start without further ado!

Step 1: Install Wondershare Filmora

Click on the Try It Free button above to download and install Wondershare Filmora. Once the software installation is complete, launch it.

Step 2: Import the Video

Choose “New Project” from the primary interface, and now, go to the “Import” option to add or import the media files. You can also do a drag-and-drop.

Step 3: Select the Audio Option

Double-click the video or right-click the audio to choose the “Adjust Audio” option on the timeline that will lead you to the editing window.

Step 4: Employ Audio Ducking

You are almost there whereby tick the “Lower the volume of other clips” checkbox to proceed. Using the slider, swipe it to set the degree to which you want to lower the volume of background music.

So, these simple steps are required to enable audio ducking in Wondershare Filmora. So easy! Along with it, you can also consider using the Fade Out and Pitch slider tab for versatile audio adjustment. However, you must only check for the Ducking tab, especially when you’re a beginner and don’t want to go for extreme changes.

Conclusion

Thus, with a discussion over two different ways to implement the audio ducking feature, it’s time to state our final overview. No doubt, the PowerDirector audio ducking feature offers the simplistic way, but it lacks flexibility. Due to the keyframe setting’s automation, you can’t check for a specific part in the audio and adjust the volume as per your needs. However, this could have been done pretty quickly in Wondershare Filmora’s video editor, making it the best alternative to CyberLink PowerDirector. Keeping it the top priority, begin your journey today!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

“Can you explain to us the simple method to execute audio ducking?”

I hope you’re already aware of the audio ducking feature if you’re into video editing or any music industry. The audio ducking is commonly to balance two audios. You can see the very typical application while balancing the background music with the person speaking there. So, the different voices would pop up and needs an adjustment according to the scenario. However, selecting the most straightforward process and genuine video editor is the user’s responsibility to get the task done effectively. So, here, we would like to discuss the audio ducking function of CyberLink PowerDirector along with a suitable alternative - Wondershare Filmora.

Part 1: How to Use Audio Ducking to Fade Out Music in PowerDirector?

CyberLink PowerDirector is a video editing software with impeccable features, including Motion Tracking, Magic Movie Wizard, Encoding, Action Camera Tools, and so on. The audio ducking element in PowerDirector has automated the audio adjustment in terms of keyframes.

So, let’s consider the below steps to fade out music or fade out audio in PowerDirector audio ducking!

Step 1: Import Video

Open the CyberLink PowerDirector application, and import the video into the timeline, as shown below. Then, you can also import the background music you’d like to add to the video.

Step 2: Select Audio Ducking

Choose the background music and hit the “Audio Ducking” option from the Tools tab.

Step 3: Confirm the Audio Ducking

A pop-up audio ducking window like the below interface will appear to state that PowerDirector will automatically analyze the music.

All you need, is to hit the OK button and lend the job to PowerDirector.

Doing so will automatically add the keyframes into the background music you’ve already imported.

So, this was the entire process of music ducking keyframes automation in CyberLink PowerDirector.

Part 2: An Alternative Solution to Audio Ducking on Mac

If you’re looking for easiness, you must consider the following section for a suitable alternative!

“Which audio ducking software is the best for Mac?”

The Wondershare Filmora is not only suitable for Mac users but Windows users as well. Here are some of its features on why we used to admire Filmora for easiness and professionalism. Used by vlogger, make-up artists, and professional video editors for tutorials, editing, voice/audio editing, and after effects, Wondershare Filmora is the best choice to give a try today.

• The best part about the Wondershare Filmora is the versatility of audio editing tools.
• The window of the Audio Ducking is super intuitive and self-explanatory to the users.
• Want to go advanced? You should admire its features, including Advanced Color Tuning, Scene Detection, Green Screen, Color Match, Motion Tracking, Animation Keyframing, and so on.

All in all, the Wondershare Filmora is a remarkable video editor fulfilling the needs of endless people around the globe. It’s usually the first name in mind when it comes to innovation and simplicity.

Here is a step-by-step tutorial after which you can compare the audio ducking easiness of Wondershare Filmora with CyberLink PowerDirector.

So, let’s start without further ado!

Step 1: Install Wondershare Filmora

Click on the Try It Free button above to download and install Wondershare Filmora. Once the software installation is complete, launch it.

Step 2: Import the Video

Choose “New Project” from the primary interface, and now, go to the “Import” option to add or import the media files. You can also do a drag-and-drop.

Step 3: Select the Audio Option

Double-click the video or right-click the audio to choose the “Adjust Audio” option on the timeline that will lead you to the editing window.

Step 4: Employ Audio Ducking

You are almost there whereby tick the “Lower the volume of other clips” checkbox to proceed. Using the slider, swipe it to set the degree to which you want to lower the volume of background music.

So, these simple steps are required to enable audio ducking in Wondershare Filmora. So easy! Along with it, you can also consider using the Fade Out and Pitch slider tab for versatile audio adjustment. However, you must only check for the Ducking tab, especially when you’re a beginner and don’t want to go for extreme changes.

Conclusion

Thus, with a discussion over two different ways to implement the audio ducking feature, it’s time to state our final overview. No doubt, the PowerDirector audio ducking feature offers the simplistic way, but it lacks flexibility. Due to the keyframe setting’s automation, you can’t check for a specific part in the audio and adjust the volume as per your needs. However, this could have been done pretty quickly in Wondershare Filmora’s video editor, making it the best alternative to CyberLink PowerDirector. Keeping it the top priority, begin your journey today!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

“Can you explain to us the simple method to execute audio ducking?”

I hope you’re already aware of the audio ducking feature if you’re into video editing or any music industry. The audio ducking is commonly to balance two audios. You can see the very typical application while balancing the background music with the person speaking there. So, the different voices would pop up and needs an adjustment according to the scenario. However, selecting the most straightforward process and genuine video editor is the user’s responsibility to get the task done effectively. So, here, we would like to discuss the audio ducking function of CyberLink PowerDirector along with a suitable alternative - Wondershare Filmora.

Part 1: How to Use Audio Ducking to Fade Out Music in PowerDirector?

CyberLink PowerDirector is a video editing software with impeccable features, including Motion Tracking, Magic Movie Wizard, Encoding, Action Camera Tools, and so on. The audio ducking element in PowerDirector has automated the audio adjustment in terms of keyframes.

So, let’s consider the below steps to fade out music or fade out audio in PowerDirector audio ducking!

Step 1: Import Video

Open the CyberLink PowerDirector application, and import the video into the timeline, as shown below. Then, you can also import the background music you’d like to add to the video.

Step 2: Select Audio Ducking

Choose the background music and hit the “Audio Ducking” option from the Tools tab.

Step 3: Confirm the Audio Ducking

A pop-up audio ducking window like the below interface will appear to state that PowerDirector will automatically analyze the music.

All you need, is to hit the OK button and lend the job to PowerDirector.

Doing so will automatically add the keyframes into the background music you’ve already imported.

So, this was the entire process of music ducking keyframes automation in CyberLink PowerDirector.

Part 2: An Alternative Solution to Audio Ducking on Mac

If you’re looking for easiness, you must consider the following section for a suitable alternative!

“Which audio ducking software is the best for Mac?”

The Wondershare Filmora is not only suitable for Mac users but Windows users as well. Here are some of its features on why we used to admire Filmora for easiness and professionalism. Used by vlogger, make-up artists, and professional video editors for tutorials, editing, voice/audio editing, and after effects, Wondershare Filmora is the best choice to give a try today.

• The best part about the Wondershare Filmora is the versatility of audio editing tools.
• The window of the Audio Ducking is super intuitive and self-explanatory to the users.
• Want to go advanced? You should admire its features, including Advanced Color Tuning, Scene Detection, Green Screen, Color Match, Motion Tracking, Animation Keyframing, and so on.

All in all, the Wondershare Filmora is a remarkable video editor fulfilling the needs of endless people around the globe. It’s usually the first name in mind when it comes to innovation and simplicity.

Here is a step-by-step tutorial after which you can compare the audio ducking easiness of Wondershare Filmora with CyberLink PowerDirector.

So, let’s start without further ado!

Step 1: Install Wondershare Filmora

Click on the Try It Free button above to download and install Wondershare Filmora. Once the software installation is complete, launch it.

Step 2: Import the Video

Choose “New Project” from the primary interface, and now, go to the “Import” option to add or import the media files. You can also do a drag-and-drop.

Step 3: Select the Audio Option

Double-click the video or right-click the audio to choose the “Adjust Audio” option on the timeline that will lead you to the editing window.

Step 4: Employ Audio Ducking

You are almost there whereby tick the “Lower the volume of other clips” checkbox to proceed. Using the slider, swipe it to set the degree to which you want to lower the volume of background music.

So, these simple steps are required to enable audio ducking in Wondershare Filmora. So easy! Along with it, you can also consider using the Fade Out and Pitch slider tab for versatile audio adjustment. However, you must only check for the Ducking tab, especially when you’re a beginner and don’t want to go for extreme changes.

Conclusion

Thus, with a discussion over two different ways to implement the audio ducking feature, it’s time to state our final overview. No doubt, the PowerDirector audio ducking feature offers the simplistic way, but it lacks flexibility. Due to the keyframe setting’s automation, you can’t check for a specific part in the audio and adjust the volume as per your needs. However, this could have been done pretty quickly in Wondershare Filmora’s video editor, making it the best alternative to CyberLink PowerDirector. Keeping it the top priority, begin your journey today!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Elevating Audio Excellence: Adjusting Pitch in Audacity without Compromising Quality

You may raise or lower the pitch of a pre-recorded song. Likewise, you may apply the pitch-changing effect in real-time sound recording. Change in pitch affects your noise in certain ways. For instance, it can help you sound younger. Similarly, it can convert the male voice into a female voice. Another notable use of the pitch-changing technique is that you can produce sounds like cartoons. So, changing pitch can add a unique touch to your voice. You can also change pitch when recording in Audacity. The following article covers details about the Audacity change pitch feature. Let’s get started.

In this article

01 What is pitch, and how does it work?

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

“Combine Music with Visual Content at Zero Expense”

Do you have an interest in creating some amazing and entertaining videos? Are you looking for a great source to edit and add song to video? Are you searching for complete guides to using the best video editing tools? If you are wandering with any of these factors or related queries, you should keep reading this blog. Here, you will find out complete information about one of the best video editing tools and understand how to use it for getting some amazing results.

Let’s start with an introduction:

In this article

01 [Video Apps To Add & Edit Song](#Part 1)

02 [How To Add Song In Video?](#Part 2)

03 [How To Edit Song On Video?](#Part 3)

Part 1 Video Apps To Add & Edit Song

When it comes to searching for the best app to add song to video free, you may find two types of options. Mainly, these are differentiated on the basis of devices, such as – mobile and desktop. Here, we will get introduced to the best application for both types of devices and also figure out how to add song to video.

For Desktop: Filmora

Filmora is the best video editing software that allows you to edit videos, edit songs, add audio to videos, and so on. It has a user-friendly interface that reduces the effort and time required to complete the task. You can apply different types of effects or elements to the videos and express your creativity as you want. It also provides complete support to the users as well by sharing well-written guides on all possible things, like - how to add song in video. The software is available with lots of features that can make tasks much easier.

For Mobile: Filmora

In case you are interested in editing videos by using mobile devices, you can consider Filmora. It is the mobile version of Filmora. You can get it for both iOS and Android devices. It depends on you, where and how you want to use it. Filmora is similar to the desktop version and has lots of features, such as – trim & cut video, merge video, more than 1000 music files available, user-friendly interest, and so on. It will also provide proper support, where you can raise all queries, like - how to add song in a video, how to edit a video, how to edit audio, and so on.

Part 2 How To Add Song In Video?

For Desktop: Filmora – A Step By Step Guide

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step1 Import Audio & Video

Firstly, you should install Filmora on your desktop device. In the software, you can see the MEDIA tab. You should access it and proceed by choosing the IMPORT option from the menu bar. It will show the complete list of media files available on your device. You should choose one and proceed. It is the first step for how to add song on video.

Step2 Add Music To Timeline

While adding a song to a video, the most important thing is the timeline. In case the timeline of audio and video don’t match, it will ruin the outcomes. Due to it, everyone wants to know how to add song in slow motion video without getting anything ruined. Here, you can use the drag features to set up audio parallel to the video.

Step3 Edit Music Files

In case you feel the requirement of some audio edits during how add song in video procedure, it can be possible as well. You should double click the audio file and you can proceed as you want with equalizer. While editing the music files, you should be careful. One wrong change or mistake can ruin your audio tracks and spoil the entire video.

Step4 Export

After all the changes and adjustments, you can proceed by saving the changes and exporting the file. It depends on you that in what format you want that outcome (MP4 or WMV).

For Mobile: Filmora – A Step By Step Guide

Step1 Video Selection

If you want to know how to add song to video in mobile, you should proceed by installing and launching Filmora. In the application, you can see the “CREATE NEW VIDEO” button. You can pick the desired video from mobile and go with the ‘ADD’ button.

Step2 Add Audio

Now, it’s the second step for understanding how to add song for video on mobile. You should click on the ‘MUSIC’ button that you can see in the right toolbar. Here, you should choose the desired audio and for confirmation, you can play it as well. You should not boost the procedure by skipping any testing or confirmation step. It can lead to bad results only.

Step3 Export

After all these things, you can easily figure out how can I add song to my video. If your video is finalized, you can proceed by exporting it. While exporting the files, you should be properly aware of the format and all related factors. Try to choose the video format that supports your system and serves your purpose easily.

Part 3 How To Edit Song On Video?

Step1 Add Videos & Audio

Firstly, you should proceed by adding video and audio files to the software. In case you also want to edit a video, you can proceed with it while performing how to add songs to your videos procedure. You need to click the NEW PROJECT button and then the IMPORT button. You can also add audio by using drag and drop features.

Step2 Edit Audio Track

Now, you can start editing the audio file after completing the how to add song to the video process. Filmora provides multiple features to proceed and make edits.

● Separating existing audio files from video

● Make adjustments in audio settings

● Remove background noise

● Use built-in library for audio effects

● Add a recording or voiceover

● Increase or decrease audio speed

These are some major features, you can use for editing audio.

Step3 Save The Changes

While proceeding with how to add song on a video or audio editing process, you should not forget to save the changes. In case you exit the app and don’t save changes, you will lose the complete hard work.

After all these things, you can proceed with other changes in video and export the video files to use or share as you want.

Part 4 Where Can I Find Songs Without Watermark?

Filmora Song Resources

Filmora is a video editor and also has a big audio library that offers over 500 audio files for free. You can easily use these songs, music, sound effects, and music files without any kind of problem. It can also make your way to add song to the video.

YouTube Library

Another major way that can help you to get songs or music files for videos is the YouTube library. It can also help you get files to add song to video without watermark. Here, you will not get all audio or music files to use. Before choosing an audio file, you should check out the copyright and everything properly.

Download From Third-Party Sources

On the internet, you can see multiple websites or platforms with free audio or music services. These platforms are also allowing you to download the files to add song to your video without any kind of issue. It will not lead to any kind of watermark or other issues.

Compose Own Music

If you know music technicalities and all things, you can focus on creating or composing it on your own. It will also provide desired results without any problem.

Final Words

With all these details, you can clear all your doubts or confusion, such as - how to add song in video in phone, how to get good sound effects, and so on. The use of Filmora will help you in several ways and showcase the creative in the best possible ways.

02 [How To Add Song In Video?](#Part 2)

03 [How To Edit Song On Video?](#Part 3)

Part 1 Video Apps To Add & Edit Song

When it comes to searching for the best app to add song to video free, you may find two types of options. Mainly, these are differentiated on the basis of devices, such as – mobile and desktop. Here, we will get introduced to the best application for both types of devices and also figure out how to add song to video.

For Desktop: Filmora

Filmora is the best video editing software that allows you to edit videos, edit songs, add audio to videos, and so on. It has a user-friendly interface that reduces the effort and time required to complete the task. You can apply different types of effects or elements to the videos and express your creativity as you want. It also provides complete support to the users as well by sharing well-written guides on all possible things, like - how to add song in video. The software is available with lots of features that can make tasks much easier.

For Mobile: Filmora

In case you are interested in editing videos by using mobile devices, you can consider Filmora. It is the mobile version of Filmora. You can get it for both iOS and Android devices. It depends on you, where and how you want to use it. Filmora is similar to the desktop version and has lots of features, such as – trim & cut video, merge video, more than 1000 music files available, user-friendly interest, and so on. It will also provide proper support, where you can raise all queries, like - how to add song in a video, how to edit a video, how to edit audio, and so on.

Part 2 How To Add Song In Video?

For Desktop: Filmora – A Step By Step Guide

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step1 Import Audio & Video

Firstly, you should install Filmora on your desktop device. In the software, you can see the MEDIA tab. You should access it and proceed by choosing the IMPORT option from the menu bar. It will show the complete list of media files available on your device. You should choose one and proceed. It is the first step for how to add song on video.

Step2 Add Music To Timeline

While adding a song to a video, the most important thing is the timeline. In case the timeline of audio and video don’t match, it will ruin the outcomes. Due to it, everyone wants to know how to add song in slow motion video without getting anything ruined. Here, you can use the drag features to set up audio parallel to the video.

Step3 Edit Music Files

In case you feel the requirement of some audio edits during how add song in video procedure, it can be possible as well. You should double click the audio file and you can proceed as you want with equalizer. While editing the music files, you should be careful. One wrong change or mistake can ruin your audio tracks and spoil the entire video.

Step4 Export

After all the changes and adjustments, you can proceed by saving the changes and exporting the file. It depends on you that in what format you want that outcome (MP4 or WMV).

For Mobile: Filmora – A Step By Step Guide

Step1 Video Selection

If you want to know how to add song to video in mobile, you should proceed by installing and launching Filmora. In the application, you can see the “CREATE NEW VIDEO” button. You can pick the desired video from mobile and go with the ‘ADD’ button.

Step2 Add Audio

Now, it’s the second step for understanding how to add song for video on mobile. You should click on the ‘MUSIC’ button that you can see in the right toolbar. Here, you should choose the desired audio and for confirmation, you can play it as well. You should not boost the procedure by skipping any testing or confirmation step. It can lead to bad results only.

Step3 Export

After all these things, you can easily figure out how can I add song to my video. If your video is finalized, you can proceed by exporting it. While exporting the files, you should be properly aware of the format and all related factors. Try to choose the video format that supports your system and serves your purpose easily.

Part 3 How To Edit Song On Video?

Step1 Add Videos & Audio

Firstly, you should proceed by adding video and audio files to the software. In case you also want to edit a video, you can proceed with it while performing how to add songs to your videos procedure. You need to click the NEW PROJECT button and then the IMPORT button. You can also add audio by using drag and drop features.

Step2 Edit Audio Track

Now, you can start editing the audio file after completing the how to add song to the video process. Filmora provides multiple features to proceed and make edits.

● Separating existing audio files from video

● Make adjustments in audio settings

● Remove background noise

● Use built-in library for audio effects

● Add a recording or voiceover

● Increase or decrease audio speed

These are some major features, you can use for editing audio.

Step3 Save The Changes

While proceeding with how to add song on a video or audio editing process, you should not forget to save the changes. In case you exit the app and don’t save changes, you will lose the complete hard work.

After all these things, you can proceed with other changes in video and export the video files to use or share as you want.

Part 4 Where Can I Find Songs Without Watermark?

Filmora Song Resources

Filmora is a video editor and also has a big audio library that offers over 500 audio files for free. You can easily use these songs, music, sound effects, and music files without any kind of problem. It can also make your way to add song to the video.

YouTube Library

Another major way that can help you to get songs or music files for videos is the YouTube library. It can also help you get files to add song to video without watermark. Here, you will not get all audio or music files to use. Before choosing an audio file, you should check out the copyright and everything properly.

Download From Third-Party Sources

On the internet, you can see multiple websites or platforms with free audio or music services. These platforms are also allowing you to download the files to add song to your video without any kind of issue. It will not lead to any kind of watermark or other issues.

Compose Own Music

If you know music technicalities and all things, you can focus on creating or composing it on your own. It will also provide desired results without any problem.

Final Words

With all these details, you can clear all your doubts or confusion, such as - how to add song in video in phone, how to get good sound effects, and so on. The use of Filmora will help you in several ways and showcase the creative in the best possible ways.

02 [How To Add Song In Video?](#Part 2)

03 [How To Edit Song On Video?](#Part 3)

Part 1 Video Apps To Add & Edit Song

When it comes to searching for the best app to add song to video free, you may find two types of options. Mainly, these are differentiated on the basis of devices, such as – mobile and desktop. Here, we will get introduced to the best application for both types of devices and also figure out how to add song to video.

For Desktop: Filmora

Filmora is the best video editing software that allows you to edit videos, edit songs, add audio to videos, and so on. It has a user-friendly interface that reduces the effort and time required to complete the task. You can apply different types of effects or elements to the videos and express your creativity as you want. It also provides complete support to the users as well by sharing well-written guides on all possible things, like - how to add song in video. The software is available with lots of features that can make tasks much easier.

For Mobile: Filmora

In case you are interested in editing videos by using mobile devices, you can consider Filmora. It is the mobile version of Filmora. You can get it for both iOS and Android devices. It depends on you, where and how you want to use it. Filmora is similar to the desktop version and has lots of features, such as – trim & cut video, merge video, more than 1000 music files available, user-friendly interest, and so on. It will also provide proper support, where you can raise all queries, like - how to add song in a video, how to edit a video, how to edit audio, and so on.

Part 2 How To Add Song In Video?

For Desktop: Filmora – A Step By Step Guide

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step1 Import Audio & Video

Firstly, you should install Filmora on your desktop device. In the software, you can see the MEDIA tab. You should access it and proceed by choosing the IMPORT option from the menu bar. It will show the complete list of media files available on your device. You should choose one and proceed. It is the first step for how to add song on video.

Step2 Add Music To Timeline

While adding a song to a video, the most important thing is the timeline. In case the timeline of audio and video don’t match, it will ruin the outcomes. Due to it, everyone wants to know how to add song in slow motion video without getting anything ruined. Here, you can use the drag features to set up audio parallel to the video.

Step3 Edit Music Files

In case you feel the requirement of some audio edits during how add song in video procedure, it can be possible as well. You should double click the audio file and you can proceed as you want with equalizer. While editing the music files, you should be careful. One wrong change or mistake can ruin your audio tracks and spoil the entire video.

Step4 Export

After all the changes and adjustments, you can proceed by saving the changes and exporting the file. It depends on you that in what format you want that outcome (MP4 or WMV).

For Mobile: Filmora – A Step By Step Guide

Step1 Video Selection

If you want to know how to add song to video in mobile, you should proceed by installing and launching Filmora. In the application, you can see the “CREATE NEW VIDEO” button. You can pick the desired video from mobile and go with the ‘ADD’ button.

Step2 Add Audio

Now, it’s the second step for understanding how to add song for video on mobile. You should click on the ‘MUSIC’ button that you can see in the right toolbar. Here, you should choose the desired audio and for confirmation, you can play it as well. You should not boost the procedure by skipping any testing or confirmation step. It can lead to bad results only.

Step3 Export

After all these things, you can easily figure out how can I add song to my video. If your video is finalized, you can proceed by exporting it. While exporting the files, you should be properly aware of the format and all related factors. Try to choose the video format that supports your system and serves your purpose easily.

Part 3 How To Edit Song On Video?

Step1 Add Videos & Audio

Firstly, you should proceed by adding video and audio files to the software. In case you also want to edit a video, you can proceed with it while performing how to add songs to your videos procedure. You need to click the NEW PROJECT button and then the IMPORT button. You can also add audio by using drag and drop features.

Step2 Edit Audio Track

Now, you can start editing the audio file after completing the how to add song to the video process. Filmora provides multiple features to proceed and make edits.

● Separating existing audio files from video

● Make adjustments in audio settings

● Remove background noise

● Use built-in library for audio effects

● Add a recording or voiceover

● Increase or decrease audio speed

These are some major features, you can use for editing audio.

Step3 Save The Changes

While proceeding with how to add song on a video or audio editing process, you should not forget to save the changes. In case you exit the app and don’t save changes, you will lose the complete hard work.

After all these things, you can proceed with other changes in video and export the video files to use or share as you want.

Part 4 Where Can I Find Songs Without Watermark?

Filmora Song Resources

Filmora is a video editor and also has a big audio library that offers over 500 audio files for free. You can easily use these songs, music, sound effects, and music files without any kind of problem. It can also make your way to add song to the video.

YouTube Library

Another major way that can help you to get songs or music files for videos is the YouTube library. It can also help you get files to add song to video without watermark. Here, you will not get all audio or music files to use. Before choosing an audio file, you should check out the copyright and everything properly.

Download From Third-Party Sources

On the internet, you can see multiple websites or platforms with free audio or music services. These platforms are also allowing you to download the files to add song to your video without any kind of issue. It will not lead to any kind of watermark or other issues.

Compose Own Music

If you know music technicalities and all things, you can focus on creating or composing it on your own. It will also provide desired results without any problem.

Final Words

With all these details, you can clear all your doubts or confusion, such as - how to add song in video in phone, how to get good sound effects, and so on. The use of Filmora will help you in several ways and showcase the creative in the best possible ways.

02 [How To Add Song In Video?](#Part 2)

03 [How To Edit Song On Video?](#Part 3)

Part 1 Video Apps To Add & Edit Song

When it comes to searching for the best app to add song to video free, you may find two types of options. Mainly, these are differentiated on the basis of devices, such as – mobile and desktop. Here, we will get introduced to the best application for both types of devices and also figure out how to add song to video.

For Desktop: Filmora

Filmora is the best video editing software that allows you to edit videos, edit songs, add audio to videos, and so on. It has a user-friendly interface that reduces the effort and time required to complete the task. You can apply different types of effects or elements to the videos and express your creativity as you want. It also provides complete support to the users as well by sharing well-written guides on all possible things, like - how to add song in video. The software is available with lots of features that can make tasks much easier.

For Mobile: Filmora

In case you are interested in editing videos by using mobile devices, you can consider Filmora. It is the mobile version of Filmora. You can get it for both iOS and Android devices. It depends on you, where and how you want to use it. Filmora is similar to the desktop version and has lots of features, such as – trim & cut video, merge video, more than 1000 music files available, user-friendly interest, and so on. It will also provide proper support, where you can raise all queries, like - how to add song in a video, how to edit a video, how to edit audio, and so on.

Part 2 How To Add Song In Video?

For Desktop: Filmora – A Step By Step Guide

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

Step1 Import Audio & Video

Firstly, you should install Filmora on your desktop device. In the software, you can see the MEDIA tab. You should access it and proceed by choosing the IMPORT option from the menu bar. It will show the complete list of media files available on your device. You should choose one and proceed. It is the first step for how to add song on video.

Step2 Add Music To Timeline

While adding a song to a video, the most important thing is the timeline. In case the timeline of audio and video don’t match, it will ruin the outcomes. Due to it, everyone wants to know how to add song in slow motion video without getting anything ruined. Here, you can use the drag features to set up audio parallel to the video.

Step3 Edit Music Files

In case you feel the requirement of some audio edits during how add song in video procedure, it can be possible as well. You should double click the audio file and you can proceed as you want with equalizer. While editing the music files, you should be careful. One wrong change or mistake can ruin your audio tracks and spoil the entire video.

Step4 Export

After all the changes and adjustments, you can proceed by saving the changes and exporting the file. It depends on you that in what format you want that outcome (MP4 or WMV).

For Mobile: Filmora – A Step By Step Guide

Step1 Video Selection

If you want to know how to add song to video in mobile, you should proceed by installing and launching Filmora. In the application, you can see the “CREATE NEW VIDEO” button. You can pick the desired video from mobile and go with the ‘ADD’ button.

Step2 Add Audio

Now, it’s the second step for understanding how to add song for video on mobile. You should click on the ‘MUSIC’ button that you can see in the right toolbar. Here, you should choose the desired audio and for confirmation, you can play it as well. You should not boost the procedure by skipping any testing or confirmation step. It can lead to bad results only.

Step3 Export

After all these things, you can easily figure out how can I add song to my video. If your video is finalized, you can proceed by exporting it. While exporting the files, you should be properly aware of the format and all related factors. Try to choose the video format that supports your system and serves your purpose easily.

Part 3 How To Edit Song On Video?

Step1 Add Videos & Audio

Firstly, you should proceed by adding video and audio files to the software. In case you also want to edit a video, you can proceed with it while performing how to add songs to your videos procedure. You need to click the NEW PROJECT button and then the IMPORT button. You can also add audio by using drag and drop features.

Step2 Edit Audio Track

Now, you can start editing the audio file after completing the how to add song to the video process. Filmora provides multiple features to proceed and make edits.

● Separating existing audio files from video

● Make adjustments in audio settings

● Remove background noise

● Use built-in library for audio effects

● Add a recording or voiceover

● Increase or decrease audio speed

These are some major features, you can use for editing audio.

Step3 Save The Changes

While proceeding with how to add song on a video or audio editing process, you should not forget to save the changes. In case you exit the app and don’t save changes, you will lose the complete hard work.

After all these things, you can proceed with other changes in video and export the video files to use or share as you want.

Part 4 Where Can I Find Songs Without Watermark?

Filmora Song Resources

Filmora is a video editor and also has a big audio library that offers over 500 audio files for free. You can easily use these songs, music, sound effects, and music files without any kind of problem. It can also make your way to add song to the video.

YouTube Library

Another major way that can help you to get songs or music files for videos is the YouTube library. It can also help you get files to add song to video without watermark. Here, you will not get all audio or music files to use. Before choosing an audio file, you should check out the copyright and everything properly.

Download From Third-Party Sources

On the internet, you can see multiple websites or platforms with free audio or music services. These platforms are also allowing you to download the files to add song to your video without any kind of issue. It will not lead to any kind of watermark or other issues.

Compose Own Music

If you know music technicalities and all things, you can focus on creating or composing it on your own. It will also provide desired results without any problem.

Final Words

With all these details, you can clear all your doubts or confusion, such as - how to add song in video in phone, how to get good sound effects, and so on. The use of Filmora will help you in several ways and showcase the creative in the best possible ways.

Also read: