Streamlining Your Mixes: Normalizing Audio in DaVinci Resolve

How To Normalize Audio In DaVinci Resolve

It happens a lot of times that we are not satisfied with several details our videos and audios contain, and we need to edit them. One of the most common problems we face is that our volumes are not normalized, and we need to take some extra time in order to achieve the best result for our audiences. Even with little or no knowledge about this very specific topic, we need to inform ourselves and find the solutions, make our videos more watch-able and our audios more listen-able, so to say.

There are several ways the audio normalization is achieved. One type is called peak normalization, helping adjust the recording based on the highest signal level present in the recording; the second is loudness normalization, adjusting the recording based on perceived loudness. RMS (Root-Mean-Square) changes the value of all the samples, where their average electrical volume overall is a specified level.

Mostly, there are two reasons why we should give audio normalization a try. You need to decide yourself, what is your reason and expected outcome when you use audio normalization. First is when your aim is to get the maximum volume, but the second boils down to matching different volumes with each other.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

More concretely, in general, audio normalization is when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, “the norm” for the project. It means that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

You can have the desired result using different kinds of software. Nowadays, a lot of programs offer you the tool which facilitates this process. So, one of them would be DaVinci Resolve, which we are going to discuss in this article.

What is DaVinci Resolve? The description goes: “DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool!” so, let’s discover what this software can do to help us balance the audio!

So, how to balance your audio in DaVinci Resolve? We are going to discuss everything step by step – how to set your target loudness level, how to monitor the loudness, and how you can use the automation feature.

Well, of course, have the program installed and opened. Then, add your video with the audio you want to edit or the audio separately, if that’s what you are aiming to do.

The first step you need to make is to set your target loudness level – for this, find the little settings button on the right bottom of the program and click on it. Now, go down to the Fairlight menu and change the Target Loudness Level. If you are doing the audio normalization for the Youtube content, then it is recommended to set it to -14 LUFS.

Next, you are going to head to the Fairlight page and make sure that your meters are open. the loudness meter is on the right top of the layout of the program, and it goes from +9 to -15 LUFS.

Here, zero represents exactly what our target loudness level is, in this case, as you remember, we set it to -14 LUFS. So, ensure that our loudness is as close as zero as possible on the meter, but you can also make it lower, such as -3. Whenever you play, you will be able to see that there are some numbers popping up to the right of the meter.

The first one, you’ll find, is Short – constantly changing, indicating how far above or below the target loudness level you are at a given time. Short Max tells you how far above or below your target loudness level the loudest point of your video is. Range is a measure of your quietest pick to your loudest peak, and the last one is Integrated – it gives you the overall loudness of your video in relation to your target loudness level. Integrated is the number we aim to keep around -3 or 0.

We can use our main slider (next to the sequence on the right) to make our video louder or quieter until we hit that target loudness level.

Also, there is an automation tool that can help you dial in your loudness. In order to access this feature, find a red icon, looking like a wave with kind of a key frames.

Next, open up your Index (on the far top panel, a little bit from the left), and make sure you are in the tracks menu in your editing index.

What you want to do is to make your main track visible on the timeline, so hit on the eyeball next to your main and go to your timeline, where you will expand your main track until you see your Loudness History options.

Here, you will need to check in the box next to Integrated and turn on the Loudness History. This will show the integrated loudness level, adjust your main track’s volume accordingly, so you are below the zero line. And, that’s actually it!

How to normalize audio in Wondershare Filmora X?

Even though doing this with the help of DaVinci Resolve is really helpful, and, let’s say, sophisticated, you might find it a little complicated, in case you were not so familiar with video/audio editing. So, we would like you to have some information about what alternative you can turn to, and in this case, it’s worth bringing up a software - Wondershare Filmora X . With it, you will find that the same task can be carried out wonderfully. It is also a video editor, but it is one of the easiest to use in the word, supported by Mac and Windows. Filmora offers a great, neat, user-friendly interface, and helps you understand the very basics of editing. Actually, it has not been long since Wondershare Filmora X introduced the feature to normalize the audio. So, you might want download the latest version of Filmora X and start following along the steps we are going to provide for you to understand how audio normalization works on Filmora X .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Free Download For macOS 10.14 or later

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

“Audio Annihilation 101: Instructions to Remove Unwanted Sounds From Video Clips on Windows & Mac”

How to Remove Audio from MOV Files on Windows/Mac

Shanoon Cox

Mar 27, 2024• Proven solutions

When editing a video QuickTime MOV file, sometimes you may need toremove audio tracks bundled with it so that you can add a different audio track. Although a range of video editing programs can help you achieve this, I think Wondershare Filmora is worth trying. This program is cross-platform so that it can help you remove audio completely from the original MOV files with ease in both Windows and Mac.

Below is a detailed tutorial on how to remove audio from QuickTime MOV files in Windows (Widnows XP/Vista/7/8/10 included). If you’re running a Mac, you can adopt Filmora for Ma to achieve the same. Before getting started, please download and install the right version for your operating system.

Remove audio from quicktime videos

To remove audio from video, you can simply mute the video audio in Filmora or you can remove the audio track from the video. Below we will share you how to remove the audio track in QuickTime .MOV video with Filmora.

1 Import the source video files

After download and initiating this audio remover, choose between 16:9, 1:1, 9:16 and 4:3 ratio rates. Then click the “Import” button to add the source video files to the this video & audio editing software. You can also directly drag and drop your MOV video files to the media library. After importing the source video files, drag and place them to the video timeline.

2 Remove audio from QuickTime MOV files

Double click the target MOV video file in the timeline to highlight it. Then right click the video file and select “Audio Detach” option. The program will automatically separate the existing audio track from the original video file. You will find the separated audio track will appear in the Audio track. To remove the audio from MOV video, right click the audio track and choose “Delete”. If you want to keep the audio file in the video, you can click “Mute” and the video audio will not appear in the video.

Tip: This video editing tool also enables you to easily add your own sound track. To do this, just import the audio file as step 1 and then drag and drop it to the audio timeline. If the audio needs editing, double click it to adjust the volume, speed, pitch or add fade in/out effect in the pop up window.

Learn the detailed info about How to add voiceover?

Note: If you just want toremove the background audio noise from the .MOV video , you can achieve it with the De-noise feature. To do that, just double click the audio file in the time to enter the audio editing window. In the pop-up window, click the De-noise option and Filmora will remove the audio noise from the .mov video.

3 Export or save the new files

Click the “Play” button in the right preview window to see the result. If you’re satisfied, hit “Export” and you’ll go to the export window. As you see, this program offers four output ways. In the “Format” tab, you can save the new work in all popular formats such as AVI, MP4, MOV, FLV and much more. You can also convert your video to a YouTube compatible format for online sharing in the “YouTube” tab and immediately upload it. Or burn a DVD disk in minutes to watch it on your home cinema.

Besides removing audio from video, Filmora allows you to edit .MOV videos further, including changing video speed, and some advanced video editing features such as green screen and video stabilization. Check the video tutorial below to check how to edit videos with Filmora.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox