Expert Tips on Removing Audio Fuzziness for Crystal-Clear Video Production

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

Try It Free Try It Free

Whether you are in the business of shooting or editing, noisy or distorted footage is among the most frustrating roadblocks you’ll ever encounter in your workflow. The magic of filmmaking lies after the scenes in post-production. You can remove distortion from audio using various methods.

In this article

01 What Is Distortion in Audio?

02 The Difference Between Noise and Distortion

03 How to Remove Distortion From Audio for Your Video

What Is Distortion in Audio?

You have probably heard the term distortion and would like to know what it is. Distortion is a common term in music production.

Although the term is simple, there is more than meets the eye. Distortion is defined as the change or deformation of an audio waveform that results in the production of an audio output that is different from the input. Distortion can occur at a single point or multiple points in a specific signal chain.

While there are many types of audio distortion, the most common one is clipping. It occurs when an audio signal is amplified beyond the maximum allowed unit in both analog and digital systems.

A signal is distorted when an output does not record the same signal as the input. The issue can occur due to amplifier clipping, faulty equipment, overloading of a sound source, production of hot signals, and pushing speakers beyond their limit.

In the past, people perceived distortion as a bad thing. Today, however, some kinds of distortions are considered beneficial because of their positive effect on the sound. Sound engineers apply plugins, outboard gear, and other techniques to add pleasing distortions to audios. The distortions work by adding unique elements to audios, thus improving sounds in many instances.

The Difference Between Noise and Distortion

Noise and distortion can sound very similar and hard to tell apart. However, the two are different phenomena with unique characteristics. Noise is an undesired disturbance that sounds white or pink and creates an even-tempered sound wave. On the other hand, distortion is the alteration of a waveform, where some parts are amplified while others are attenuated, leading to an uneven distribution of energy among frequencies. Let’s look at the differences between noise and distortion.

1. Where It Appears in a Signal

Noise appears randomly throughout the signal, while distortion seems at the same frequency. One example of noise is an audio hiss that can be heard when no other sounds are present. An example of distortion is a sine wave with a flat top and bottom combined with different amplitudes.

2. How It Affects Signals

Noise is random and can appear when signals are quiet. Distortion is affected by the input signal and can be altered by adding or removing signal frequencies.

How It’s Measured

You can measure distortion by using an oscilloscope to display the input signal’s waveform over time. The oscilloscope measures energy distribution among different frequencies, while you can measure noise with a spectrum analyzer by displaying an audio signal’s magnitude and frequency content over time.

Despite their differences, noise and distortion are both unwanted sounds. When they are present in a signal, they can degrade its quality. For this reason, it is essential to understand the differences between them to assess signs and produce better results accurately.

How to Remove Distortion From Audio for Your Video

You can use several different methods to remove audio distortion in your video. They include:

Method 1: Use an Online Audio Distortion Tool

You can use an online distortion tool to fix this problem. One of the popular tools for removing distortion from audio is Audacity. Available for Linux, macOS, Windows, and other Unix-like operating systems, Audacity is a FOSS (free and open-source digital audio editor software). It is also a recording application software, and you can use the program for varying tasks, including conversing audio files, removing audio distortion, adding effects, and mixing audio clips.

Keeping this in mind, let’s look at how to remove distortion from audio using Audacity.

1. The first step is opening the file. To do this, drag and drop the audio file into Audacity.
2. Next, you need to select the distorted area before clicking on Effect. Once you have done this, click on the Noise Reduction option.

1. Doing this will open the Noise reduction window.
2. Go to the Noise Profile and click on it; this will allow Audacity to know what it should filter out.

1. Now, select the whole audio before reopening the Noise Reduction Window. Set the values as you see necessary.
2. Check the audio by clicking Preview. If you are satisfied with the results, click OK.
3. Be sure to apply the filter again if your audio is still distorted. Avoid doing it excessively, as the audio could be degraded. In turn, this can lead to the voice sounding robotic and tinny.

Method 2: Software Solutions - Adobe Audition

You can remove distortion from audio using specialized audio editing software. One of the professional audio tools that you can use to fix audio distortion is Adobe Audition; this software allows you to carve out any unwanted sound for impressive results.

These steps below will allow you to remove distortion from audio with Adobe Audition.

1. Double click on the track to access the Waveform.
2. Go to Window, and then select the Amplitude Statistics option.
3. A new window will open. Now, hit the Scan button in the left corner. The software will then scan the audio.

1. Check the section written Possibly Clipped Samples.

1. Head over to Effects>Diagnostics> DeClipper.

1. In the Preset section, select the Restore Heavily Clipped option.

1. Next, hit the Settings button, and adjust the Tolerance.

1. Hit the Scan button again, and you’ll see all the problems in your audio.
2. Click Repair all to fix your distorted audio.

1. Alternatively, you could head to Effects Rack and click on Filter and EQ, then FFT Filter.

1. Put the Preset option to Default settings. Take out a few of the frequencies where your audio is distorted.

Method 3: Video Editing Tools like VSDC

When it comes to removing distortion from audio, you can use video editing tools to fix this problem. VSDC is one of the non-linear editing applications that people use to remove audio distortion.

Follow the steps below to learn how to remove distortion from audio using VSDC.

1. Upload your footage to VSDC and right-click on it.
2. Select the Audio effects option, then choose Filters. Click on Gate.

1. You will see the Properties window. Here, you will find all the parameters that you need to fix your audio problems, including distortion.

The Gate filter allows users to control how fast and when the gate opens and what sort of sounds can get in.

• Threshold: This is the level of the decibel at which the gate opens. Set it based on the loudness of the audio distortion.
• Attack: This parameter defines how fast the gate will open. Essentially, the higher the attack value, the slower the gate opens. /li>
• Knee: With this parameter, you can control the response of the compressor to the signal that’s crossing the threshold. That means you can apply compression with a delay or instantly.
• Make-up gain: This increases the signal level after it has been processed.
• Ratio: This value controls compression applied to the distortion. It defines how quieter the distortion will be after gating.
• Reduction: This parameter defines the level of signal reduction will be.
• Release: This value defines how fast the gate will close after opening. You can change the Release parameter to suit your preferences.

Method 4:Normalize Your Audio with Filmora Audio Equalizer

Filmora is a video editing software that you can use to shoot, edit, and share clips with other people. It provides an easy-to-use interface that has made it one of the most popular choices for independent filmmakers. Filmora also offers audio equalizer effects designed for professional sound designers who want to work on projects with their voice-over recordings.

You can normalize your audio with Filmora by following the three simple steps below:

Step 1. Open Filmora and Import your file

First, open up Filmora and open your audio file. It can be any format you have except MOV from Apple devices like iPhone or iPad. Then, select the Media tab on the top of Filmora’s main window to import your media file.

Step 2. Adjust the Levels

Next, click the Levels option on Filmora’s left panel, where you will find three options: Gain, Equalize, and Normalizer. You can use this to adjust your audio level to be loud enough without being too loud. The normalizer helps you ensure that your audio is at a consistent level throughout the recording. You can use it both for music or voice-over recordings.

Step 3. Export Your File

Finally, you may export it when you have made the necessary adjustments to your audio file. Just click the File tab in Filmora’s main window and select Export. Many options are available for exporting your media file, including an output profile setting where you may choose MP4, AVI, or WMV and upload to Facebook, Youtube, and Vimeo.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Normalizing your audio file is not a complicated process, but it does require some technical knowledge. However, your audio will sound excellent and professional if you follow the steps above. You can use Filmora’s audio equalizer effects to normalize your video.

“Audio Mastery for QuickTime Videos: Advanced Tips & Tricks”

How to Add Audio to QuickTime Video Files

Shanoon Cox

Mar 27, 2024• Proven solutions

Sometimes you may want to replace the original audio of a QuickTime video or add your own audio file. Instead of compressing the video again, Wondershare Filmora (originally Wondershare Video Editor) makes it really easy to do this in just a few steps. Now follow the detailed guide below to learn how to easily add audio to QuickTime video files. You can download this software first:

How to Add Audio to QuickTime Video Files

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1 Import your QuickTime video files to the program

After you install this video editor, click the shortcut on the desktop to launch it. Then a window will pop up to let your select the aspect ratio between 16:9 and 4:3. After making your choice, click the “Import” button or drag and drop your QuickTime video & audio files to this program. Since this program supports a vast range of formats, you don’t have to convert the original video format to edit it.

2 Add audio to QuickTime video files

After that, place both of the video and audio files to the corresponding tracks of the timeline. Make sure that the lengths of them are approximately the same. If not, you would need to edit the video and or audio streams (for example, deleting unnecessary fragments) in order to make their lengths equal. You can click the “Split” icon above the Timeline to split and cut the unwanted part of the files. After syncing the video and audio files perfectly, you can right click and further adjust the audio file in the editing panel, like changing the playing speed, volume, pitch, etc.

Tip: You can also replace the original soundtrack of the QuickTime video file. To do this, just right click the video file and choose “Audio Detach”. Then the audio file will appear on the audio track. Then right click the audio file and choose “Delete” to delete the audio.

3 Export the new video file

After adding audio to the QuickTime video, hit the “Create” to export your video file. You can go to the “Format” tab to save the new video file in different formats. Or go to the “Device” tab if you want to watch the new file on your portable media device like iPod, iPhone, etc. There will be dozens of preset output profiles for converting your video file to almost every kind of media devices like iPod, iPhone, Xbox 360, mobile phones and different players. You can also directly share your video on YouTube or Facebook in the “YouTube” tab or burn to a DVD if you like.

Watch the video below to check how to edit videos with Filmora video editor.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

You may also interested in: How to edit video with QuickTime

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Sometimes you may want to replace the original audio of a QuickTime video or add your own audio file. Instead of compressing the video again, Wondershare Filmora (originally Wondershare Video Editor) makes it really easy to do this in just a few steps. Now follow the detailed guide below to learn how to easily add audio to QuickTime video files. You can download this software first:

How to Add Audio to QuickTime Video Files

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1 Import your QuickTime video files to the program

After you install this video editor, click the shortcut on the desktop to launch it. Then a window will pop up to let your select the aspect ratio between 16:9 and 4:3. After making your choice, click the “Import” button or drag and drop your QuickTime video & audio files to this program. Since this program supports a vast range of formats, you don’t have to convert the original video format to edit it.

2 Add audio to QuickTime video files

After that, place both of the video and audio files to the corresponding tracks of the timeline. Make sure that the lengths of them are approximately the same. If not, you would need to edit the video and or audio streams (for example, deleting unnecessary fragments) in order to make their lengths equal. You can click the “Split” icon above the Timeline to split and cut the unwanted part of the files. After syncing the video and audio files perfectly, you can right click and further adjust the audio file in the editing panel, like changing the playing speed, volume, pitch, etc.

Tip: You can also replace the original soundtrack of the QuickTime video file. To do this, just right click the video file and choose “Audio Detach”. Then the audio file will appear on the audio track. Then right click the audio file and choose “Delete” to delete the audio.

3 Export the new video file

After adding audio to the QuickTime video, hit the “Create” to export your video file. You can go to the “Format” tab to save the new video file in different formats. Or go to the “Device” tab if you want to watch the new file on your portable media device like iPod, iPhone, etc. There will be dozens of preset output profiles for converting your video file to almost every kind of media devices like iPod, iPhone, Xbox 360, mobile phones and different players. You can also directly share your video on YouTube or Facebook in the “YouTube” tab or burn to a DVD if you like.

Watch the video below to check how to edit videos with Filmora video editor.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

You may also interested in: How to edit video with QuickTime

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Sometimes you may want to replace the original audio of a QuickTime video or add your own audio file. Instead of compressing the video again, Wondershare Filmora (originally Wondershare Video Editor) makes it really easy to do this in just a few steps. Now follow the detailed guide below to learn how to easily add audio to QuickTime video files. You can download this software first:

How to Add Audio to QuickTime Video Files

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1 Import your QuickTime video files to the program

After you install this video editor, click the shortcut on the desktop to launch it. Then a window will pop up to let your select the aspect ratio between 16:9 and 4:3. After making your choice, click the “Import” button or drag and drop your QuickTime video & audio files to this program. Since this program supports a vast range of formats, you don’t have to convert the original video format to edit it.

2 Add audio to QuickTime video files

After that, place both of the video and audio files to the corresponding tracks of the timeline. Make sure that the lengths of them are approximately the same. If not, you would need to edit the video and or audio streams (for example, deleting unnecessary fragments) in order to make their lengths equal. You can click the “Split” icon above the Timeline to split and cut the unwanted part of the files. After syncing the video and audio files perfectly, you can right click and further adjust the audio file in the editing panel, like changing the playing speed, volume, pitch, etc.

Tip: You can also replace the original soundtrack of the QuickTime video file. To do this, just right click the video file and choose “Audio Detach”. Then the audio file will appear on the audio track. Then right click the audio file and choose “Delete” to delete the audio.

3 Export the new video file

After adding audio to the QuickTime video, hit the “Create” to export your video file. You can go to the “Format” tab to save the new video file in different formats. Or go to the “Device” tab if you want to watch the new file on your portable media device like iPod, iPhone, etc. There will be dozens of preset output profiles for converting your video file to almost every kind of media devices like iPod, iPhone, Xbox 360, mobile phones and different players. You can also directly share your video on YouTube or Facebook in the “YouTube” tab or burn to a DVD if you like.

Watch the video below to check how to edit videos with Filmora video editor.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

You may also interested in: How to edit video with QuickTime

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Sometimes you may want to replace the original audio of a QuickTime video or add your own audio file. Instead of compressing the video again, Wondershare Filmora (originally Wondershare Video Editor) makes it really easy to do this in just a few steps. Now follow the detailed guide below to learn how to easily add audio to QuickTime video files. You can download this software first:

How to Add Audio to QuickTime Video Files

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

1 Import your QuickTime video files to the program

After you install this video editor, click the shortcut on the desktop to launch it. Then a window will pop up to let your select the aspect ratio between 16:9 and 4:3. After making your choice, click the “Import” button or drag and drop your QuickTime video & audio files to this program. Since this program supports a vast range of formats, you don’t have to convert the original video format to edit it.

2 Add audio to QuickTime video files

After that, place both of the video and audio files to the corresponding tracks of the timeline. Make sure that the lengths of them are approximately the same. If not, you would need to edit the video and or audio streams (for example, deleting unnecessary fragments) in order to make their lengths equal. You can click the “Split” icon above the Timeline to split and cut the unwanted part of the files. After syncing the video and audio files perfectly, you can right click and further adjust the audio file in the editing panel, like changing the playing speed, volume, pitch, etc.

Tip: You can also replace the original soundtrack of the QuickTime video file. To do this, just right click the video file and choose “Audio Detach”. Then the audio file will appear on the audio track. Then right click the audio file and choose “Delete” to delete the audio.

3 Export the new video file

After adding audio to the QuickTime video, hit the “Create” to export your video file. You can go to the “Format” tab to save the new video file in different formats. Or go to the “Device” tab if you want to watch the new file on your portable media device like iPod, iPhone, etc. There will be dozens of preset output profiles for converting your video file to almost every kind of media devices like iPod, iPhone, Xbox 360, mobile phones and different players. You can also directly share your video on YouTube or Facebook in the “YouTube” tab or burn to a DVD if you like.

Watch the video below to check how to edit videos with Filmora video editor.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

You may also interested in: How to edit video with QuickTime

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Leading Audio Processors for Cutting the Clutter of Unwanted Echoes

Background noise is the unwanted sound present in the background while recording audio. It diminishes the overall sound quality of the audio or video. It is not always possible to make a call or record an audio or video from a silent room. Then the noise was made by working machines like a fan, air conditioner, etc., or people talking. It will make it difficult to hear the recording and concentrate on the topic. Quite annoying, right?

Best Audio Editors to Remove Background Noise from Audio

We all know background noise will reduce the overall impression of the video no matter how perfect the video is. Here we will discuss 4 applications that can be used to remove background noise from any audio clip (they are listed in no particular order).

In this article

01 Wondershare Filmora

02 Audacity

03 VSDC Video Editor

04 Movavi Video Editor

Part 1: Wondershare Filmora

Wondershare Filmora is a video editing app with extensive features and options for editing a video or audio. Amateurs, as well as professionals, equally use this application. You can remove background noise by its simple denoise feature in several mins. Let’s see how noise reduction is done using Filmora:

Download Filmora below, and install it on your computer.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.12 or later

Open Filmora, and go to File-Import Media to import your source video to the Media Library.

Add or drag-n-drop the source video to the video track. Then right-click the video on the track, and select Adjust Audio option.

The audio settings panel will pop up. Please enable the Remove background noise option, and then adjust the denoising level to Strong by moving the pointer to the extreme right.

Playback your video on the line and check whether the voice quality has been improved.

Filmora supports various video formats. You can select the format you want and export the video or upload your video to Youtube and Vimeo directly. Once done, click Export to save or export your video.

Tips:

The audio can also be fine-tuned by using the Equalizer feature of Filmora, making the audio sound more natural. Also, the Audio Mixer feature will help you to edit the audio further and save it in MP3 format.

Part 2: Audacity

Audacity is an open platform for audio recording and editing. It is a very simple-to-use application and can be used to record, play, import, and export any audio files of WAV, MP3, AIFF, and OGG. Audacity also offers mixing tracks and applying special effects to the audios.

First, select the “silent” part of the audio, where only the noise can be heard.

Tap on the Effects menu at the top and select Noise Removal.

Tap on the Get Noise Profile option.

Select all the audios from which you wish to remove the background noise.

Now once again, go to the Effects menu and tap on the Noise Removal option.

Adjust the settings if you feel it is necessary and click OK to save the settings.

Listen to the audio clip to ensure the quality has been improved and the noise reduced. And here are the waveforms before and after the noise removal.

Tips:

It is always recommended to reduce the noise before recording audio on Audacity.

Part 3: VSDC Video Editor

VSDC is a top-notch video editor with various high-end editing tools that allow users to enhance their videos easily. It offers screen recording, voice-overs, color correction, and even the green screen effect. To help you refine your videos to the highest quality, you can use the noise removal tool in VSDC.

Here are the easy steps to de-noise audio:

Open the VSDC video editor. Then click on the Editor tab and click on Run Sprite Wizard or Audio.

Select a file to be imported or drag and drop it to the slides. Click Apply Settings to proceed.

Open the Audio effects drop-down menu, tap on Filters, and finally on Gate.

Now, adjust the threshold level in the right panel by reducing it.

Similarly, adjust the Attack and Release levels to reduce the background noise.

Part 4: Movavi Video Editor

Movavi is a simple video editing application that anyone can use to edit videos based on the time it was taken, for example, wedding videos, birthday videos, etc. it offers a lot of features to edit a video clip based on a specific theme. Here is how noise reduction can be done by using Movavi Video Editor.

Open the Movavi Video editor on your desktop and open an audio/video clip on your timeline.

Click on the audio clip to select it and then tap on the Settings icon on the extreme left.

Then choose the Audio Editing option and tap on the Noise Removal box.

Adjust the Noise Suppression pointer according to the video’s need.

Playback the video on the timeline and check if the sound quality gets better.

Tips:

The Noise Suppression level needs to be adjusted for every video as the noise level will be different for every one of them. Using speakers while playing back the audio after noise suppression is also recommended to check the audio quality.

To sum up

The above are 4 of the best editing applications available in the market in which unwanted background music can be removed. These applications also have a lot of other features that can be useful for audio and video editing.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Free Download Free Download

Best Audio Editors to Remove Background Noise from Audio

We all know background noise will reduce the overall impression of the video no matter how perfect the video is. Here we will discuss 4 applications that can be used to remove background noise from any audio clip (they are listed in no particular order).

In this article

01 Wondershare Filmora

02 Audacity

03 VSDC Video Editor

04 Movavi Video Editor

Part 1: Wondershare Filmora

Wondershare Filmora is a video editing app with extensive features and options for editing a video or audio. Amateurs, as well as professionals, equally use this application. You can remove background noise by its simple denoise feature in several mins. Let’s see how noise reduction is done using Filmora:

Download Filmora below, and install it on your computer.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.12 or later

Open Filmora, and go to File-Import Media to import your source video to the Media Library.

Add or drag-n-drop the source video to the video track. Then right-click the video on the track, and select Adjust Audio option.

The audio settings panel will pop up. Please enable the Remove background noise option, and then adjust the denoising level to Strong by moving the pointer to the extreme right.

Playback your video on the line and check whether the voice quality has been improved.

Filmora supports various video formats. You can select the format you want and export the video or upload your video to Youtube and Vimeo directly. Once done, click Export to save or export your video.

Tips:

The audio can also be fine-tuned by using the Equalizer feature of Filmora, making the audio sound more natural. Also, the Audio Mixer feature will help you to edit the audio further and save it in MP3 format.

Part 2: Audacity

Audacity is an open platform for audio recording and editing. It is a very simple-to-use application and can be used to record, play, import, and export any audio files of WAV, MP3, AIFF, and OGG. Audacity also offers mixing tracks and applying special effects to the audios.

First, select the “silent” part of the audio, where only the noise can be heard.

Tap on the Effects menu at the top and select Noise Removal.

Tap on the Get Noise Profile option.

Select all the audios from which you wish to remove the background noise.

Now once again, go to the Effects menu and tap on the Noise Removal option.

Adjust the settings if you feel it is necessary and click OK to save the settings.

Listen to the audio clip to ensure the quality has been improved and the noise reduced. And here are the waveforms before and after the noise removal.

Tips:

It is always recommended to reduce the noise before recording audio on Audacity.

Part 3: VSDC Video Editor

VSDC is a top-notch video editor with various high-end editing tools that allow users to enhance their videos easily. It offers screen recording, voice-overs, color correction, and even the green screen effect. To help you refine your videos to the highest quality, you can use the noise removal tool in VSDC.

Here are the easy steps to de-noise audio:

Open the VSDC video editor. Then click on the Editor tab and click on Run Sprite Wizard or Audio.

Select a file to be imported or drag and drop it to the slides. Click Apply Settings to proceed.

Open the Audio effects drop-down menu, tap on Filters, and finally on Gate.

Now, adjust the threshold level in the right panel by reducing it.

Similarly, adjust the Attack and Release levels to reduce the background noise.

Part 4: Movavi Video Editor

Movavi is a simple video editing application that anyone can use to edit videos based on the time it was taken, for example, wedding videos, birthday videos, etc. it offers a lot of features to edit a video clip based on a specific theme. Here is how noise reduction can be done by using Movavi Video Editor.

Open the Movavi Video editor on your desktop and open an audio/video clip on your timeline.

Click on the audio clip to select it and then tap on the Settings icon on the extreme left.

Then choose the Audio Editing option and tap on the Noise Removal box.

Adjust the Noise Suppression pointer according to the video’s need.

Playback the video on the timeline and check if the sound quality gets better.

Tips:

The Noise Suppression level needs to be adjusted for every video as the noise level will be different for every one of them. Using speakers while playing back the audio after noise suppression is also recommended to check the audio quality.

To sum up

The above are 4 of the best editing applications available in the market in which unwanted background music can be removed. These applications also have a lot of other features that can be useful for audio and video editing.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Free Download Free Download

Best Audio Editors to Remove Background Noise from Audio

We all know background noise will reduce the overall impression of the video no matter how perfect the video is. Here we will discuss 4 applications that can be used to remove background noise from any audio clip (they are listed in no particular order).

In this article

01 Wondershare Filmora

02 Audacity

03 VSDC Video Editor

04 Movavi Video Editor

Part 1: Wondershare Filmora

Wondershare Filmora is a video editing app with extensive features and options for editing a video or audio. Amateurs, as well as professionals, equally use this application. You can remove background noise by its simple denoise feature in several mins. Let’s see how noise reduction is done using Filmora:

Download Filmora below, and install it on your computer.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.12 or later

Open Filmora, and go to File-Import Media to import your source video to the Media Library.

Add or drag-n-drop the source video to the video track. Then right-click the video on the track, and select Adjust Audio option.

The audio settings panel will pop up. Please enable the Remove background noise option, and then adjust the denoising level to Strong by moving the pointer to the extreme right.

Playback your video on the line and check whether the voice quality has been improved.

Filmora supports various video formats. You can select the format you want and export the video or upload your video to Youtube and Vimeo directly. Once done, click Export to save or export your video.

Tips:

The audio can also be fine-tuned by using the Equalizer feature of Filmora, making the audio sound more natural. Also, the Audio Mixer feature will help you to edit the audio further and save it in MP3 format.

Part 2: Audacity

Audacity is an open platform for audio recording and editing. It is a very simple-to-use application and can be used to record, play, import, and export any audio files of WAV, MP3, AIFF, and OGG. Audacity also offers mixing tracks and applying special effects to the audios.

First, select the “silent” part of the audio, where only the noise can be heard.

Tap on the Effects menu at the top and select Noise Removal.

Tap on the Get Noise Profile option.

Select all the audios from which you wish to remove the background noise.

Now once again, go to the Effects menu and tap on the Noise Removal option.

Adjust the settings if you feel it is necessary and click OK to save the settings.

Listen to the audio clip to ensure the quality has been improved and the noise reduced. And here are the waveforms before and after the noise removal.

Tips:

It is always recommended to reduce the noise before recording audio on Audacity.

Part 3: VSDC Video Editor

VSDC is a top-notch video editor with various high-end editing tools that allow users to enhance their videos easily. It offers screen recording, voice-overs, color correction, and even the green screen effect. To help you refine your videos to the highest quality, you can use the noise removal tool in VSDC.

Here are the easy steps to de-noise audio:

Open the VSDC video editor. Then click on the Editor tab and click on Run Sprite Wizard or Audio.

Select a file to be imported or drag and drop it to the slides. Click Apply Settings to proceed.

Open the Audio effects drop-down menu, tap on Filters, and finally on Gate.

Now, adjust the threshold level in the right panel by reducing it.

Similarly, adjust the Attack and Release levels to reduce the background noise.

Part 4: Movavi Video Editor

Movavi is a simple video editing application that anyone can use to edit videos based on the time it was taken, for example, wedding videos, birthday videos, etc. it offers a lot of features to edit a video clip based on a specific theme. Here is how noise reduction can be done by using Movavi Video Editor.

Open the Movavi Video editor on your desktop and open an audio/video clip on your timeline.

Click on the audio clip to select it and then tap on the Settings icon on the extreme left.

Then choose the Audio Editing option and tap on the Noise Removal box.

Adjust the Noise Suppression pointer according to the video’s need.

Playback the video on the timeline and check if the sound quality gets better.

Tips:

The Noise Suppression level needs to be adjusted for every video as the noise level will be different for every one of them. Using speakers while playing back the audio after noise suppression is also recommended to check the audio quality.

To sum up

The above are 4 of the best editing applications available in the market in which unwanted background music can be removed. These applications also have a lot of other features that can be useful for audio and video editing.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Free Download Free Download

Best Audio Editors to Remove Background Noise from Audio

We all know background noise will reduce the overall impression of the video no matter how perfect the video is. Here we will discuss 4 applications that can be used to remove background noise from any audio clip (they are listed in no particular order).

In this article

01 Wondershare Filmora

02 Audacity

03 VSDC Video Editor

04 Movavi Video Editor

Part 1: Wondershare Filmora

Wondershare Filmora is a video editing app with extensive features and options for editing a video or audio. Amateurs, as well as professionals, equally use this application. You can remove background noise by its simple denoise feature in several mins. Let’s see how noise reduction is done using Filmora:

Download Filmora below, and install it on your computer.

Free Download

For Win 7 or later (64-bit)

Free Download

For macOS 10.12 or later

Open Filmora, and go to File-Import Media to import your source video to the Media Library.

Add or drag-n-drop the source video to the video track. Then right-click the video on the track, and select Adjust Audio option.

The audio settings panel will pop up. Please enable the Remove background noise option, and then adjust the denoising level to Strong by moving the pointer to the extreme right.

Playback your video on the line and check whether the voice quality has been improved.

Filmora supports various video formats. You can select the format you want and export the video or upload your video to Youtube and Vimeo directly. Once done, click Export to save or export your video.

Tips:

The audio can also be fine-tuned by using the Equalizer feature of Filmora, making the audio sound more natural. Also, the Audio Mixer feature will help you to edit the audio further and save it in MP3 format.

Part 2: Audacity

Audacity is an open platform for audio recording and editing. It is a very simple-to-use application and can be used to record, play, import, and export any audio files of WAV, MP3, AIFF, and OGG. Audacity also offers mixing tracks and applying special effects to the audios.

First, select the “silent” part of the audio, where only the noise can be heard.

Tap on the Effects menu at the top and select Noise Removal.

Tap on the Get Noise Profile option.

Select all the audios from which you wish to remove the background noise.

Now once again, go to the Effects menu and tap on the Noise Removal option.

Adjust the settings if you feel it is necessary and click OK to save the settings.

Listen to the audio clip to ensure the quality has been improved and the noise reduced. And here are the waveforms before and after the noise removal.

Tips:

It is always recommended to reduce the noise before recording audio on Audacity.

Part 3: VSDC Video Editor

VSDC is a top-notch video editor with various high-end editing tools that allow users to enhance their videos easily. It offers screen recording, voice-overs, color correction, and even the green screen effect. To help you refine your videos to the highest quality, you can use the noise removal tool in VSDC.

Here are the easy steps to de-noise audio:

Open the VSDC video editor. Then click on the Editor tab and click on Run Sprite Wizard or Audio.

Select a file to be imported or drag and drop it to the slides. Click Apply Settings to proceed.

Open the Audio effects drop-down menu, tap on Filters, and finally on Gate.

Now, adjust the threshold level in the right panel by reducing it.

Similarly, adjust the Attack and Release levels to reduce the background noise.

Part 4: Movavi Video Editor

Movavi is a simple video editing application that anyone can use to edit videos based on the time it was taken, for example, wedding videos, birthday videos, etc. it offers a lot of features to edit a video clip based on a specific theme. Here is how noise reduction can be done by using Movavi Video Editor.

Open the Movavi Video editor on your desktop and open an audio/video clip on your timeline.

Click on the audio clip to select it and then tap on the Settings icon on the extreme left.

Then choose the Audio Editing option and tap on the Noise Removal box.

Adjust the Noise Suppression pointer according to the video’s need.

Playback the video on the timeline and check if the sound quality gets better.

Tips:

The Noise Suppression level needs to be adjusted for every video as the noise level will be different for every one of them. Using speakers while playing back the audio after noise suppression is also recommended to check the audio quality.

To sum up

The above are 4 of the best editing applications available in the market in which unwanted background music can be removed. These applications also have a lot of other features that can be useful for audio and video editing.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Free Download Free Download

Also read: