Top 7 Sonic Alterations: Mastering the Art of Digital Audio Transformation

7 Types of Audio Effects You Should Know

Benjamin Arango

Mar 27, 2024• Proven solutions

When it comes to producing music, audio effects are a next-level creative tool that you can make use of to create highly enthralling and creative music/videos.

You can either create audio effects of your own or make use of a predefined royalty-free audio effects template (if you don’t wish to invest, as a beginner).

Audio effects have the power to transform any so-so music into a superior finished track.

For this reason, we’ve specifically tailored this post to help you understand the insights of audio effects. Moreover, we’re also going to get familiar with 7 audio effects that must be known! So, let’s not delay any further and start exploring.

• Part 1: The Definition of Audio Effects
• Part 2: Audio effects - Reverb
• Part 3: Audio effects - Panning
• Part 4: Audio effects - Equalization
• Part 5: Audio effects - Delay and Echo
• Part 6: Audio effects - Distortion
• Part 7: Audio effects - Chorus
• Part 8: Audio effects - Filters

Part 1: The Definition of Audio Effects

Before we get our hands on the different core types of audio effects, we should first understand what audio effects are!

Basically, the audio effects are generated by software or hardware devices by manipulating how an audio signal sounds. One can control the Effects with the help of several parameters.

For instance, rate, drive, or feedback. They come in handy as studio tools during the mixing or recording of music or while playing live.

Here are some core types of audio effects we will discover further in the article.

• Time-based effects include “Reverb” and “Delay and Echo.”
• Spectral effects include the “Equalization (EQ)” and “Panning.”
• Dynamic effects include “Distortion.”
• Modulation effects include “Chorus.”
• And “Filters.”

Part 2: Audio effects - Reverb

Reverb is nothing but an audio effect of many echoes occurring simultaneously.

In other words, sound reaches your ears in two ways. One that directly reaches your eardrums without any obstacles or surfaces.

And the other, a bunch of sound waves that reach your ears after getting bounced off different surfaces. This set of echoes reach your eardrums later and is quieter (due to lesser energy).

You may experience different types of reverb audio effects for different kinds of spaces. Basically, Reverb stands for Reverberation. It happens quite always in our daily life, but we hardly notice it.

For instance, Reverb at tunnels or caves is different from the reverb audio effect of cathedrals or halls.

Reverb audio effects can be generated digitally with the help of reverb plugins to create multiple echoes algorithmically and by manipulating the Delay, level, or frequency response.

Part 3: Audio effects - Panning

The panning audio effect is generally created to cast an illusion that the source of the sound is moving from one position of the stage to another. This is achieved by distributing the sound signal in a multichannel or a stereo field.

Panning audio effect is highly helpful when you need to avoid muddiness or masking (when two tracks/sounds overlap) in your mix. You can position the sound artificially to a specific area of your stereo field.

With the help of an auto-pan, you can define the time span during which the sound must sweep across the stereo field.

Usually, the lead elements like vocals or the low-frequency elements like bassline drums panned to the center. This is because the center is the busiest, and also these sound elements ground your mix.

Part 4: Audio effects - Equalization

The sound frequency that falls into the range from 20 to 20,000 Hz is the audible sound spectrum of human ears. With the EQ technique, this spectrum is split into different sections referred to as bands.

These bands are then used to subdue or enhance a mixed track’s fragments.

Remember, EQ-ing works on the existing spectrum only by altering the fragments to create novel-sounding effects. EQ audio effects are majorly used to define a character or tone of the soundtrack.

Moreover, you can define different types of sound characters with the help of different EQ audio effects. For instance, a digital plugin EQ is far more transparent sounding when compared to a vintage EQ.

Part 5: Audio effects - Delay and Echo

Delay is yet another type of audio effect that falls under the Time-based category. Adding layers can significantly provide more complexity and depth to a soundtrack.

The foundation to add Reverb or chorus-like other audio effects is furnished by Delay. Hence, it is prominently utilized by several mixing engineers.

The echo also falls under the time-based audio effect, which is developed due to the Delay audio effect. An echoing effect is simulated at various intervals when Delay audio effect features playback heads or “taps” that are heard apart.

If you want to edit audios like a pro, you should use Filmora . It is the best video editor for different users. You can add echo to audio by directly dragging the effect onto the timeline. Download it now to have a try (Free)!

Part 6: Audio effects - Distortion

When an audio circuit is overloaded, it ultimately leads to a clip the signal is termed as Distortion.

This audio effect can be a highly creative tool if used correctly. Distortion pushes the sound to compress and clip by manipulating the original audio signal.

By manipulating the bit rate or the sampling rate, Bit-crushing is achieved. This, eventually, adds harmony to the sound.

Usually, the electric guitars make use of Distortion audio effect but more progressively it is being used over Synths.

Distortion can be acquired using effects units, rackmounts, pedals, VSTs, or at times, built-in amplifiers and pre-amps. Distortion adds complexity and body to your track by making it fatter and fuller.

Part 7: Audio effects - Chorus

Chorus audio effect is referred to the varying sounds that are similar and are heard as one.

For instance, recording the same note piled over each other and is timed and tuned slightly off each other.

This as a whole, creates a chorus effect. In simple words, a group of singers is voicing a song while creating a special sound effect.

The chorus, too, adds complexity and depth to your soundtracks. It is generally used to enhance the harmony or load up the particular track, making the track fuller and layered.

Part 8: Audio effects - Filters

An audio signal’s frequency range can be altered using the Audio filters. With the help of an audio filter, you can easily amplify or boost the frequency range.

Or, can even cut or attenuate a frequency range too. When it comes to categorizing the Audio Filters, they fall under 3 units; HPF (High-pass filters), LPF (Low-pass filters), BPF (Band-pass filters).

Every other filter has a well-defined threshold for boosting or cutting a frequency. They are then categorized depending on the alterations that have been made above or below this threshold.

An Audio filter is a prominent tool used to correct problems and significantly enhance tracks. You can effectively make dramatic effects or add character to the soundtrack with filters.

Conclusion

With this comprehensive discussion on audio effects and various core types of audio effects, it’s now time to conclude this topic. We now believe you have a full understanding of these core audio effects and can effectively use them as per your needs.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

When it comes to producing music, audio effects are a next-level creative tool that you can make use of to create highly enthralling and creative music/videos.

You can either create audio effects of your own or make use of a predefined royalty-free audio effects template (if you don’t wish to invest, as a beginner).

Audio effects have the power to transform any so-so music into a superior finished track.

For this reason, we’ve specifically tailored this post to help you understand the insights of audio effects. Moreover, we’re also going to get familiar with 7 audio effects that must be known! So, let’s not delay any further and start exploring.

• Part 1: The Definition of Audio Effects
• Part 2: Audio effects - Reverb
• Part 3: Audio effects - Panning
• Part 4: Audio effects - Equalization
• Part 5: Audio effects - Delay and Echo
• Part 6: Audio effects - Distortion
• Part 7: Audio effects - Chorus
• Part 8: Audio effects - Filters

Part 1: The Definition of Audio Effects

Before we get our hands on the different core types of audio effects, we should first understand what audio effects are!

Basically, the audio effects are generated by software or hardware devices by manipulating how an audio signal sounds. One can control the Effects with the help of several parameters.

For instance, rate, drive, or feedback. They come in handy as studio tools during the mixing or recording of music or while playing live.

Here are some core types of audio effects we will discover further in the article.

• Time-based effects include “Reverb” and “Delay and Echo.”
• Spectral effects include the “Equalization (EQ)” and “Panning.”
• Dynamic effects include “Distortion.”
• Modulation effects include “Chorus.”
• And “Filters.”

Part 2: Audio effects - Reverb

Reverb is nothing but an audio effect of many echoes occurring simultaneously.

In other words, sound reaches your ears in two ways. One that directly reaches your eardrums without any obstacles or surfaces.

And the other, a bunch of sound waves that reach your ears after getting bounced off different surfaces. This set of echoes reach your eardrums later and is quieter (due to lesser energy).

You may experience different types of reverb audio effects for different kinds of spaces. Basically, Reverb stands for Reverberation. It happens quite always in our daily life, but we hardly notice it.

For instance, Reverb at tunnels or caves is different from the reverb audio effect of cathedrals or halls.

Reverb audio effects can be generated digitally with the help of reverb plugins to create multiple echoes algorithmically and by manipulating the Delay, level, or frequency response.

Part 3: Audio effects - Panning

The panning audio effect is generally created to cast an illusion that the source of the sound is moving from one position of the stage to another. This is achieved by distributing the sound signal in a multichannel or a stereo field.

Panning audio effect is highly helpful when you need to avoid muddiness or masking (when two tracks/sounds overlap) in your mix. You can position the sound artificially to a specific area of your stereo field.

With the help of an auto-pan, you can define the time span during which the sound must sweep across the stereo field.

Usually, the lead elements like vocals or the low-frequency elements like bassline drums panned to the center. This is because the center is the busiest, and also these sound elements ground your mix.

Part 4: Audio effects - Equalization

The sound frequency that falls into the range from 20 to 20,000 Hz is the audible sound spectrum of human ears. With the EQ technique, this spectrum is split into different sections referred to as bands.

These bands are then used to subdue or enhance a mixed track’s fragments.

Remember, EQ-ing works on the existing spectrum only by altering the fragments to create novel-sounding effects. EQ audio effects are majorly used to define a character or tone of the soundtrack.

Moreover, you can define different types of sound characters with the help of different EQ audio effects. For instance, a digital plugin EQ is far more transparent sounding when compared to a vintage EQ.

Part 5: Audio effects - Delay and Echo

Delay is yet another type of audio effect that falls under the Time-based category. Adding layers can significantly provide more complexity and depth to a soundtrack.

The foundation to add Reverb or chorus-like other audio effects is furnished by Delay. Hence, it is prominently utilized by several mixing engineers.

The echo also falls under the time-based audio effect, which is developed due to the Delay audio effect. An echoing effect is simulated at various intervals when Delay audio effect features playback heads or “taps” that are heard apart.

If you want to edit audios like a pro, you should use Filmora . It is the best video editor for different users. You can add echo to audio by directly dragging the effect onto the timeline. Download it now to have a try (Free)!

Part 6: Audio effects - Distortion

When an audio circuit is overloaded, it ultimately leads to a clip the signal is termed as Distortion.

This audio effect can be a highly creative tool if used correctly. Distortion pushes the sound to compress and clip by manipulating the original audio signal.

By manipulating the bit rate or the sampling rate, Bit-crushing is achieved. This, eventually, adds harmony to the sound.

Usually, the electric guitars make use of Distortion audio effect but more progressively it is being used over Synths.

Distortion can be acquired using effects units, rackmounts, pedals, VSTs, or at times, built-in amplifiers and pre-amps. Distortion adds complexity and body to your track by making it fatter and fuller.

Part 7: Audio effects - Chorus

Chorus audio effect is referred to the varying sounds that are similar and are heard as one.

For instance, recording the same note piled over each other and is timed and tuned slightly off each other.

This as a whole, creates a chorus effect. In simple words, a group of singers is voicing a song while creating a special sound effect.

The chorus, too, adds complexity and depth to your soundtracks. It is generally used to enhance the harmony or load up the particular track, making the track fuller and layered.

Part 8: Audio effects - Filters

An audio signal’s frequency range can be altered using the Audio filters. With the help of an audio filter, you can easily amplify or boost the frequency range.

Or, can even cut or attenuate a frequency range too. When it comes to categorizing the Audio Filters, they fall under 3 units; HPF (High-pass filters), LPF (Low-pass filters), BPF (Band-pass filters).

Every other filter has a well-defined threshold for boosting or cutting a frequency. They are then categorized depending on the alterations that have been made above or below this threshold.

An Audio filter is a prominent tool used to correct problems and significantly enhance tracks. You can effectively make dramatic effects or add character to the soundtrack with filters.

Conclusion

With this comprehensive discussion on audio effects and various core types of audio effects, it’s now time to conclude this topic. We now believe you have a full understanding of these core audio effects and can effectively use them as per your needs.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

When it comes to producing music, audio effects are a next-level creative tool that you can make use of to create highly enthralling and creative music/videos.

You can either create audio effects of your own or make use of a predefined royalty-free audio effects template (if you don’t wish to invest, as a beginner).

Audio effects have the power to transform any so-so music into a superior finished track.

For this reason, we’ve specifically tailored this post to help you understand the insights of audio effects. Moreover, we’re also going to get familiar with 7 audio effects that must be known! So, let’s not delay any further and start exploring.

• Part 1: The Definition of Audio Effects
• Part 2: Audio effects - Reverb
• Part 3: Audio effects - Panning
• Part 4: Audio effects - Equalization
• Part 5: Audio effects - Delay and Echo
• Part 6: Audio effects - Distortion
• Part 7: Audio effects - Chorus
• Part 8: Audio effects - Filters

Part 1: The Definition of Audio Effects

Before we get our hands on the different core types of audio effects, we should first understand what audio effects are!

Basically, the audio effects are generated by software or hardware devices by manipulating how an audio signal sounds. One can control the Effects with the help of several parameters.

For instance, rate, drive, or feedback. They come in handy as studio tools during the mixing or recording of music or while playing live.

Here are some core types of audio effects we will discover further in the article.

• Time-based effects include “Reverb” and “Delay and Echo.”
• Spectral effects include the “Equalization (EQ)” and “Panning.”
• Dynamic effects include “Distortion.”
• Modulation effects include “Chorus.”
• And “Filters.”

Part 2: Audio effects - Reverb

Reverb is nothing but an audio effect of many echoes occurring simultaneously.

In other words, sound reaches your ears in two ways. One that directly reaches your eardrums without any obstacles or surfaces.

And the other, a bunch of sound waves that reach your ears after getting bounced off different surfaces. This set of echoes reach your eardrums later and is quieter (due to lesser energy).

You may experience different types of reverb audio effects for different kinds of spaces. Basically, Reverb stands for Reverberation. It happens quite always in our daily life, but we hardly notice it.

For instance, Reverb at tunnels or caves is different from the reverb audio effect of cathedrals or halls.

Reverb audio effects can be generated digitally with the help of reverb plugins to create multiple echoes algorithmically and by manipulating the Delay, level, or frequency response.

Part 3: Audio effects - Panning

The panning audio effect is generally created to cast an illusion that the source of the sound is moving from one position of the stage to another. This is achieved by distributing the sound signal in a multichannel or a stereo field.

Panning audio effect is highly helpful when you need to avoid muddiness or masking (when two tracks/sounds overlap) in your mix. You can position the sound artificially to a specific area of your stereo field.

With the help of an auto-pan, you can define the time span during which the sound must sweep across the stereo field.

Usually, the lead elements like vocals or the low-frequency elements like bassline drums panned to the center. This is because the center is the busiest, and also these sound elements ground your mix.

Part 4: Audio effects - Equalization

The sound frequency that falls into the range from 20 to 20,000 Hz is the audible sound spectrum of human ears. With the EQ technique, this spectrum is split into different sections referred to as bands.

These bands are then used to subdue or enhance a mixed track’s fragments.

Remember, EQ-ing works on the existing spectrum only by altering the fragments to create novel-sounding effects. EQ audio effects are majorly used to define a character or tone of the soundtrack.

Moreover, you can define different types of sound characters with the help of different EQ audio effects. For instance, a digital plugin EQ is far more transparent sounding when compared to a vintage EQ.

Part 5: Audio effects - Delay and Echo

Delay is yet another type of audio effect that falls under the Time-based category. Adding layers can significantly provide more complexity and depth to a soundtrack.

The foundation to add Reverb or chorus-like other audio effects is furnished by Delay. Hence, it is prominently utilized by several mixing engineers.

The echo also falls under the time-based audio effect, which is developed due to the Delay audio effect. An echoing effect is simulated at various intervals when Delay audio effect features playback heads or “taps” that are heard apart.

If you want to edit audios like a pro, you should use Filmora . It is the best video editor for different users. You can add echo to audio by directly dragging the effect onto the timeline. Download it now to have a try (Free)!

Part 6: Audio effects - Distortion

When an audio circuit is overloaded, it ultimately leads to a clip the signal is termed as Distortion.

This audio effect can be a highly creative tool if used correctly. Distortion pushes the sound to compress and clip by manipulating the original audio signal.

By manipulating the bit rate or the sampling rate, Bit-crushing is achieved. This, eventually, adds harmony to the sound.

Usually, the electric guitars make use of Distortion audio effect but more progressively it is being used over Synths.

Distortion can be acquired using effects units, rackmounts, pedals, VSTs, or at times, built-in amplifiers and pre-amps. Distortion adds complexity and body to your track by making it fatter and fuller.

Part 7: Audio effects - Chorus

Chorus audio effect is referred to the varying sounds that are similar and are heard as one.

For instance, recording the same note piled over each other and is timed and tuned slightly off each other.

This as a whole, creates a chorus effect. In simple words, a group of singers is voicing a song while creating a special sound effect.

The chorus, too, adds complexity and depth to your soundtracks. It is generally used to enhance the harmony or load up the particular track, making the track fuller and layered.

Part 8: Audio effects - Filters

An audio signal’s frequency range can be altered using the Audio filters. With the help of an audio filter, you can easily amplify or boost the frequency range.

Or, can even cut or attenuate a frequency range too. When it comes to categorizing the Audio Filters, they fall under 3 units; HPF (High-pass filters), LPF (Low-pass filters), BPF (Band-pass filters).

Every other filter has a well-defined threshold for boosting or cutting a frequency. They are then categorized depending on the alterations that have been made above or below this threshold.

An Audio filter is a prominent tool used to correct problems and significantly enhance tracks. You can effectively make dramatic effects or add character to the soundtrack with filters.

Conclusion

With this comprehensive discussion on audio effects and various core types of audio effects, it’s now time to conclude this topic. We now believe you have a full understanding of these core audio effects and can effectively use them as per your needs.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

When it comes to producing music, audio effects are a next-level creative tool that you can make use of to create highly enthralling and creative music/videos.

You can either create audio effects of your own or make use of a predefined royalty-free audio effects template (if you don’t wish to invest, as a beginner).

Audio effects have the power to transform any so-so music into a superior finished track.

For this reason, we’ve specifically tailored this post to help you understand the insights of audio effects. Moreover, we’re also going to get familiar with 7 audio effects that must be known! So, let’s not delay any further and start exploring.

• Part 1: The Definition of Audio Effects
• Part 2: Audio effects - Reverb
• Part 3: Audio effects - Panning
• Part 4: Audio effects - Equalization
• Part 5: Audio effects - Delay and Echo
• Part 6: Audio effects - Distortion
• Part 7: Audio effects - Chorus
• Part 8: Audio effects - Filters

Part 1: The Definition of Audio Effects

Before we get our hands on the different core types of audio effects, we should first understand what audio effects are!

Basically, the audio effects are generated by software or hardware devices by manipulating how an audio signal sounds. One can control the Effects with the help of several parameters.

For instance, rate, drive, or feedback. They come in handy as studio tools during the mixing or recording of music or while playing live.

Here are some core types of audio effects we will discover further in the article.

• Time-based effects include “Reverb” and “Delay and Echo.”
• Spectral effects include the “Equalization (EQ)” and “Panning.”
• Dynamic effects include “Distortion.”
• Modulation effects include “Chorus.”
• And “Filters.”

Part 2: Audio effects - Reverb

Reverb is nothing but an audio effect of many echoes occurring simultaneously.

In other words, sound reaches your ears in two ways. One that directly reaches your eardrums without any obstacles or surfaces.

And the other, a bunch of sound waves that reach your ears after getting bounced off different surfaces. This set of echoes reach your eardrums later and is quieter (due to lesser energy).

You may experience different types of reverb audio effects for different kinds of spaces. Basically, Reverb stands for Reverberation. It happens quite always in our daily life, but we hardly notice it.

For instance, Reverb at tunnels or caves is different from the reverb audio effect of cathedrals or halls.

Reverb audio effects can be generated digitally with the help of reverb plugins to create multiple echoes algorithmically and by manipulating the Delay, level, or frequency response.

Part 3: Audio effects - Panning

The panning audio effect is generally created to cast an illusion that the source of the sound is moving from one position of the stage to another. This is achieved by distributing the sound signal in a multichannel or a stereo field.

Panning audio effect is highly helpful when you need to avoid muddiness or masking (when two tracks/sounds overlap) in your mix. You can position the sound artificially to a specific area of your stereo field.

With the help of an auto-pan, you can define the time span during which the sound must sweep across the stereo field.

Usually, the lead elements like vocals or the low-frequency elements like bassline drums panned to the center. This is because the center is the busiest, and also these sound elements ground your mix.

Part 4: Audio effects - Equalization

The sound frequency that falls into the range from 20 to 20,000 Hz is the audible sound spectrum of human ears. With the EQ technique, this spectrum is split into different sections referred to as bands.

These bands are then used to subdue or enhance a mixed track’s fragments.

Remember, EQ-ing works on the existing spectrum only by altering the fragments to create novel-sounding effects. EQ audio effects are majorly used to define a character or tone of the soundtrack.

Moreover, you can define different types of sound characters with the help of different EQ audio effects. For instance, a digital plugin EQ is far more transparent sounding when compared to a vintage EQ.

Part 5: Audio effects - Delay and Echo

Delay is yet another type of audio effect that falls under the Time-based category. Adding layers can significantly provide more complexity and depth to a soundtrack.

The foundation to add Reverb or chorus-like other audio effects is furnished by Delay. Hence, it is prominently utilized by several mixing engineers.

The echo also falls under the time-based audio effect, which is developed due to the Delay audio effect. An echoing effect is simulated at various intervals when Delay audio effect features playback heads or “taps” that are heard apart.

If you want to edit audios like a pro, you should use Filmora . It is the best video editor for different users. You can add echo to audio by directly dragging the effect onto the timeline. Download it now to have a try (Free)!

Part 6: Audio effects - Distortion

When an audio circuit is overloaded, it ultimately leads to a clip the signal is termed as Distortion.

This audio effect can be a highly creative tool if used correctly. Distortion pushes the sound to compress and clip by manipulating the original audio signal.

By manipulating the bit rate or the sampling rate, Bit-crushing is achieved. This, eventually, adds harmony to the sound.

Usually, the electric guitars make use of Distortion audio effect but more progressively it is being used over Synths.

Distortion can be acquired using effects units, rackmounts, pedals, VSTs, or at times, built-in amplifiers and pre-amps. Distortion adds complexity and body to your track by making it fatter and fuller.

Part 7: Audio effects - Chorus

Chorus audio effect is referred to the varying sounds that are similar and are heard as one.

For instance, recording the same note piled over each other and is timed and tuned slightly off each other.

This as a whole, creates a chorus effect. In simple words, a group of singers is voicing a song while creating a special sound effect.

The chorus, too, adds complexity and depth to your soundtracks. It is generally used to enhance the harmony or load up the particular track, making the track fuller and layered.

Part 8: Audio effects - Filters

An audio signal’s frequency range can be altered using the Audio filters. With the help of an audio filter, you can easily amplify or boost the frequency range.

Or, can even cut or attenuate a frequency range too. When it comes to categorizing the Audio Filters, they fall under 3 units; HPF (High-pass filters), LPF (Low-pass filters), BPF (Band-pass filters).

Every other filter has a well-defined threshold for boosting or cutting a frequency. They are then categorized depending on the alterations that have been made above or below this threshold.

An Audio filter is a prominent tool used to correct problems and significantly enhance tracks. You can effectively make dramatic effects or add character to the soundtrack with filters.

Conclusion

With this comprehensive discussion on audio effects and various core types of audio effects, it’s now time to conclude this topic. We now believe you have a full understanding of these core audio effects and can effectively use them as per your needs.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Streamlining Your Projects: Techniques for Trimming Video Audio on iOS Devices

Cutting Audio in iMovie: A Guide for Mac and iPhone Users

Marion Dubois

Apr 30, 2024• Proven solutions

Sometimes, we find the desired audio or soundtrack for our videos longer or shorter than we want, and that is where audio editing comes. Audio editing refers to manipulating audio to alter the length, speed, and volume or create additional effects such as loops. Are you new to audio trimming? Don’t worry, as our article today would show how to cut audio in iMovie on Mac and iPhone.

Part 1: How to Cut Music in iMovie on Mac?

Cutting music is audio editing carried out when the music or soundtrack seems longer than desired. To cut music or soundtrack in iMovie using Mac involves the following steps:

Step 1: Adjust the Playhead to Cut the Clip

You can cut an audio clip only when the specified audio is in the timeline. To perform the operation, right-click on the clip and pick out a split clip. This operation cuts the clip into two and divides the two pieces wherever the playhead is situated.

Step 2: Select Split Clip

Right-click and select the Split Clip. Once this step is over, you have successfully cut the audio clip.

Part 2: Cut Audio in iMovie Alternative – Wondershare Filmora

Generally, as humans, we feel more satisfied when we have options or choices because we get fed up with doing the same over and over again the same way without changes. Wondershare Filmora is an alternative for iMovie and can easily carry out the function of various forms of audio editing.

If you wish to trim off the beginning or the ending of a mp3 file quite swiftly, this section is for you. Things can get specifically weird if you want to import heavy mp3 files to your space-limited MP3 player to play.

You’re required to choose an intelligent MP3 trimmer to trim an MP3 file to any length. Here, we suggest this robust video editing software — Wondershare Filmora, which enables you to precisely extract an MP3 file or audio segment effortlessly without losing any original audio quality.

You can get both the Windows and Mac versions of this great video editor. It embodies the following features:

• Import videos, audio, or photos from various sources and edit them in one place.
• Three different video cutting methods to meet different editing needs.
• Various editing tools help you edit the video completely, including rotation, picture-in-picture, green screen, cropping, etc.
• Output the edited video to more than 20 different formats or locations as needed.
• Use more than 1,000 video effects in the effect store to customize videos.

Using Filmora is quite effortless. The following tutorial will display how to cut audio in it easily and quickly.

Step 1: Import MP3 Files for Editing

Firstly, drag the specific MP3 file or audio clip into the media library, or you can directly import audio files or video from portable devices such as your digital camera, smartphone, or camcorder, etc.

Step 2: Drag MP3 Files to the Timeline below for Cutting

Filmora provides two ways to cut audio/video files. You can either select to cut from the beginning or the end by trimming. You can also split it into various segments from the mid-sections.

Move the slider ahead to the cutting point within the midsection, and then tap the scissor icon to split it into little sections as desired.

When executed, please select the part that you don’t want to, hit the Delete button to remove.

Step 3: Export to Save

Hit the Export tab to save your edited project. If you want to save in the original MP3 format, select MP3 before you export.

Part 3: How to Trim Music in iMovie on iPhone

This section will offer you a guide on how to cut out parts of audio in an iMovie project on an iPad or iPhone. After adding music to your project, the audio is trimmed to the desired length using iMovie’s inbuilt tool.

Step #1: Open iMovie on your iPhone or iPad.

Step #2: Tap the movie project you want to edit.

It will display a list of your projects, among which you must select the one you want to edit.

If you want to edit a current section of video not even opened in iMovie, you have to make a new iMovie project to add your audio and video. Select the + icon, choose the Movie tab, select the video(s), and then choose the Create movie button.

Step #3: Hit the Edit button below the name of your project.

This opens your project in the editor. And, you’re already in the editor if you just created a new project in the previous step.

Step #4: Add audio to your project.

You can skip this step if your project already contains the audio. Hit the + icon in the upper-left timeline’s corner.

Choose Audio.

Go with a specific category:

Soundtracks are audio tracks provided by iMovie which are free to use in your project.

Select My Music to locate the file and use a song from iTunes or the music app.

Sound effects are shorter sounds—mostly below 10 seconds duration.

Choose an audio file for the preview.

Select the + icon to add the file to your project.

Step #5: Hit the audio bar on the timeline.

It is present below the multi-frame version of your video in the screen’s bottom area.

Now, detach the MP3 segment or audio from the video by tapping the video on the timeline and selecting the Detach button at the screen’s bottom area.

Step #6: Tap and drag the beginning of the audio track.

Drag or move the audio track to the exact point where you wish it to start from—the audio track’s left-end marks of the yellow bar starting your audio.

Step #7: Tap and drag the end of the audio track.

You can drag the yellow bar at the end and move it to the exact point where you want the audio to end.

If you can’t see the yellow bar on the far-right end of the audio track, swipe left below the audio track to scroll to the end.

To move the audio track to another location, select and hold it for about one second, and then move it to the desired video’s location.

Step #8: Select the Play tab for preview.

It’s the sideways triangle just below the video preview.

Step #9: Select the Done button when you’re finished.

It is present at the screen’s top-left corner. You have now confirmed the changes done to your project.

If you want to play it on any other device, tap the Share button at the bottom after choosing the Done tab and select Save Video to export it.

Part 4: Audio Editing Tips for iMovie Users

Here are some guidelines or tips for various audio editing processes, starting from cutting trim music on iMovie, using iMovie to trim audio and video together, and other audio and video editing tips.

• Use Waveforms to See What You Hear

Sound is just as relevant as the images in a video, and should focus just as much during editing. To efficiently and adequately edit audio, you need a good set of speakers and headphones to hear the sound, and you also need to be able to see the sound.

If the waveforms don’t appear, go to the “view” drop-down menu and select “show waveforms”, the waveform would show you the sound intensity level of a sound clip and definitely would give you an idea of what part will need to be turned up or down.

• Audio Adjustments

With the audio button situated at the top right, you have access to some essential audio editing tools for changing the sound level of your chosen clip or changing the relative volume of other films in the project.

The audio editing window also contains primary noise reduction and audio equalization tools and a range of effects – from robot to echo- which would affect how people sound in your video.

• Editing Audio with the Timeline

iMovie permits you to adjust the audio within the clips themselves, each volume as a bar. You can shift up and down to increase or decrease the audio level. The clips also have “fade in” and “fade out” buttons at the beginning and end, which are draggable to adjust the fade length.

Conclusion

Finally, with the answers to the question, how to cut audio in iMovie, you can follow the simple step guide and feel free to edit your audio or video to your taste using iMovie or Wondershare Filmora.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Apr 30, 2024• Proven solutions

Sometimes, we find the desired audio or soundtrack for our videos longer or shorter than we want, and that is where audio editing comes. Audio editing refers to manipulating audio to alter the length, speed, and volume or create additional effects such as loops. Are you new to audio trimming? Don’t worry, as our article today would show how to cut audio in iMovie on Mac and iPhone.

Part 1: How to Cut Music in iMovie on Mac?

Cutting music is audio editing carried out when the music or soundtrack seems longer than desired. To cut music or soundtrack in iMovie using Mac involves the following steps:

Step 1: Adjust the Playhead to Cut the Clip

You can cut an audio clip only when the specified audio is in the timeline. To perform the operation, right-click on the clip and pick out a split clip. This operation cuts the clip into two and divides the two pieces wherever the playhead is situated.

Step 2: Select Split Clip

Right-click and select the Split Clip. Once this step is over, you have successfully cut the audio clip.

Part 2: Cut Audio in iMovie Alternative – Wondershare Filmora

Generally, as humans, we feel more satisfied when we have options or choices because we get fed up with doing the same over and over again the same way without changes. Wondershare Filmora is an alternative for iMovie and can easily carry out the function of various forms of audio editing.

If you wish to trim off the beginning or the ending of a mp3 file quite swiftly, this section is for you. Things can get specifically weird if you want to import heavy mp3 files to your space-limited MP3 player to play.

You’re required to choose an intelligent MP3 trimmer to trim an MP3 file to any length. Here, we suggest this robust video editing software — Wondershare Filmora, which enables you to precisely extract an MP3 file or audio segment effortlessly without losing any original audio quality.

You can get both the Windows and Mac versions of this great video editor. It embodies the following features:

• Import videos, audio, or photos from various sources and edit them in one place.
• Three different video cutting methods to meet different editing needs.
• Various editing tools help you edit the video completely, including rotation, picture-in-picture, green screen, cropping, etc.
• Output the edited video to more than 20 different formats or locations as needed.
• Use more than 1,000 video effects in the effect store to customize videos.

Using Filmora is quite effortless. The following tutorial will display how to cut audio in it easily and quickly.

Step 1: Import MP3 Files for Editing

Firstly, drag the specific MP3 file or audio clip into the media library, or you can directly import audio files or video from portable devices such as your digital camera, smartphone, or camcorder, etc.

Step 2: Drag MP3 Files to the Timeline below for Cutting

Filmora provides two ways to cut audio/video files. You can either select to cut from the beginning or the end by trimming. You can also split it into various segments from the mid-sections.

Move the slider ahead to the cutting point within the midsection, and then tap the scissor icon to split it into little sections as desired.

When executed, please select the part that you don’t want to, hit the Delete button to remove.

Step 3: Export to Save

Hit the Export tab to save your edited project. If you want to save in the original MP3 format, select MP3 before you export.

Part 3: How to Trim Music in iMovie on iPhone

This section will offer you a guide on how to cut out parts of audio in an iMovie project on an iPad or iPhone. After adding music to your project, the audio is trimmed to the desired length using iMovie’s inbuilt tool.

Step #1: Open iMovie on your iPhone or iPad.

Step #2: Tap the movie project you want to edit.

It will display a list of your projects, among which you must select the one you want to edit.

If you want to edit a current section of video not even opened in iMovie, you have to make a new iMovie project to add your audio and video. Select the + icon, choose the Movie tab, select the video(s), and then choose the Create movie button.

Step #3: Hit the Edit button below the name of your project.

This opens your project in the editor. And, you’re already in the editor if you just created a new project in the previous step.

Step #4: Add audio to your project.

You can skip this step if your project already contains the audio. Hit the + icon in the upper-left timeline’s corner.

Choose Audio.

Go with a specific category:

Soundtracks are audio tracks provided by iMovie which are free to use in your project.

Select My Music to locate the file and use a song from iTunes or the music app.

Sound effects are shorter sounds—mostly below 10 seconds duration.

Choose an audio file for the preview.

Select the + icon to add the file to your project.

Step #5: Hit the audio bar on the timeline.

It is present below the multi-frame version of your video in the screen’s bottom area.

Now, detach the MP3 segment or audio from the video by tapping the video on the timeline and selecting the Detach button at the screen’s bottom area.

Step #6: Tap and drag the beginning of the audio track.

Drag or move the audio track to the exact point where you wish it to start from—the audio track’s left-end marks of the yellow bar starting your audio.

Step #7: Tap and drag the end of the audio track.

You can drag the yellow bar at the end and move it to the exact point where you want the audio to end.

If you can’t see the yellow bar on the far-right end of the audio track, swipe left below the audio track to scroll to the end.

To move the audio track to another location, select and hold it for about one second, and then move it to the desired video’s location.

Step #8: Select the Play tab for preview.

It’s the sideways triangle just below the video preview.

Step #9: Select the Done button when you’re finished.

It is present at the screen’s top-left corner. You have now confirmed the changes done to your project.

If you want to play it on any other device, tap the Share button at the bottom after choosing the Done tab and select Save Video to export it.

Part 4: Audio Editing Tips for iMovie Users

Here are some guidelines or tips for various audio editing processes, starting from cutting trim music on iMovie, using iMovie to trim audio and video together, and other audio and video editing tips.

• Use Waveforms to See What You Hear

Sound is just as relevant as the images in a video, and should focus just as much during editing. To efficiently and adequately edit audio, you need a good set of speakers and headphones to hear the sound, and you also need to be able to see the sound.

If the waveforms don’t appear, go to the “view” drop-down menu and select “show waveforms”, the waveform would show you the sound intensity level of a sound clip and definitely would give you an idea of what part will need to be turned up or down.

• Audio Adjustments

With the audio button situated at the top right, you have access to some essential audio editing tools for changing the sound level of your chosen clip or changing the relative volume of other films in the project.

The audio editing window also contains primary noise reduction and audio equalization tools and a range of effects – from robot to echo- which would affect how people sound in your video.

• Editing Audio with the Timeline

iMovie permits you to adjust the audio within the clips themselves, each volume as a bar. You can shift up and down to increase or decrease the audio level. The clips also have “fade in” and “fade out” buttons at the beginning and end, which are draggable to adjust the fade length.

Conclusion

Finally, with the answers to the question, how to cut audio in iMovie, you can follow the simple step guide and feel free to edit your audio or video to your taste using iMovie or Wondershare Filmora.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Apr 30, 2024• Proven solutions

Sometimes, we find the desired audio or soundtrack for our videos longer or shorter than we want, and that is where audio editing comes. Audio editing refers to manipulating audio to alter the length, speed, and volume or create additional effects such as loops. Are you new to audio trimming? Don’t worry, as our article today would show how to cut audio in iMovie on Mac and iPhone.

Part 1: How to Cut Music in iMovie on Mac?

Cutting music is audio editing carried out when the music or soundtrack seems longer than desired. To cut music or soundtrack in iMovie using Mac involves the following steps:

Step 1: Adjust the Playhead to Cut the Clip

You can cut an audio clip only when the specified audio is in the timeline. To perform the operation, right-click on the clip and pick out a split clip. This operation cuts the clip into two and divides the two pieces wherever the playhead is situated.

Step 2: Select Split Clip

Right-click and select the Split Clip. Once this step is over, you have successfully cut the audio clip.

Part 2: Cut Audio in iMovie Alternative – Wondershare Filmora

Generally, as humans, we feel more satisfied when we have options or choices because we get fed up with doing the same over and over again the same way without changes. Wondershare Filmora is an alternative for iMovie and can easily carry out the function of various forms of audio editing.

If you wish to trim off the beginning or the ending of a mp3 file quite swiftly, this section is for you. Things can get specifically weird if you want to import heavy mp3 files to your space-limited MP3 player to play.

You’re required to choose an intelligent MP3 trimmer to trim an MP3 file to any length. Here, we suggest this robust video editing software — Wondershare Filmora, which enables you to precisely extract an MP3 file or audio segment effortlessly without losing any original audio quality.

You can get both the Windows and Mac versions of this great video editor. It embodies the following features:

• Import videos, audio, or photos from various sources and edit them in one place.
• Three different video cutting methods to meet different editing needs.
• Various editing tools help you edit the video completely, including rotation, picture-in-picture, green screen, cropping, etc.
• Output the edited video to more than 20 different formats or locations as needed.
• Use more than 1,000 video effects in the effect store to customize videos.

Using Filmora is quite effortless. The following tutorial will display how to cut audio in it easily and quickly.

Step 1: Import MP3 Files for Editing

Firstly, drag the specific MP3 file or audio clip into the media library, or you can directly import audio files or video from portable devices such as your digital camera, smartphone, or camcorder, etc.

Step 2: Drag MP3 Files to the Timeline below for Cutting

Filmora provides two ways to cut audio/video files. You can either select to cut from the beginning or the end by trimming. You can also split it into various segments from the mid-sections.

Move the slider ahead to the cutting point within the midsection, and then tap the scissor icon to split it into little sections as desired.

When executed, please select the part that you don’t want to, hit the Delete button to remove.

Step 3: Export to Save

Hit the Export tab to save your edited project. If you want to save in the original MP3 format, select MP3 before you export.

Part 3: How to Trim Music in iMovie on iPhone

This section will offer you a guide on how to cut out parts of audio in an iMovie project on an iPad or iPhone. After adding music to your project, the audio is trimmed to the desired length using iMovie’s inbuilt tool.

Step #1: Open iMovie on your iPhone or iPad.

Step #2: Tap the movie project you want to edit.

It will display a list of your projects, among which you must select the one you want to edit.

If you want to edit a current section of video not even opened in iMovie, you have to make a new iMovie project to add your audio and video. Select the + icon, choose the Movie tab, select the video(s), and then choose the Create movie button.

Step #3: Hit the Edit button below the name of your project.

This opens your project in the editor. And, you’re already in the editor if you just created a new project in the previous step.

Step #4: Add audio to your project.

You can skip this step if your project already contains the audio. Hit the + icon in the upper-left timeline’s corner.

Choose Audio.

Go with a specific category:

Soundtracks are audio tracks provided by iMovie which are free to use in your project.

Select My Music to locate the file and use a song from iTunes or the music app.

Sound effects are shorter sounds—mostly below 10 seconds duration.

Choose an audio file for the preview.

Select the + icon to add the file to your project.

Step #5: Hit the audio bar on the timeline.

It is present below the multi-frame version of your video in the screen’s bottom area.

Now, detach the MP3 segment or audio from the video by tapping the video on the timeline and selecting the Detach button at the screen’s bottom area.

Step #6: Tap and drag the beginning of the audio track.

Drag or move the audio track to the exact point where you wish it to start from—the audio track’s left-end marks of the yellow bar starting your audio.

Step #7: Tap and drag the end of the audio track.

You can drag the yellow bar at the end and move it to the exact point where you want the audio to end.

If you can’t see the yellow bar on the far-right end of the audio track, swipe left below the audio track to scroll to the end.

To move the audio track to another location, select and hold it for about one second, and then move it to the desired video’s location.

Step #8: Select the Play tab for preview.

It’s the sideways triangle just below the video preview.

Step #9: Select the Done button when you’re finished.

It is present at the screen’s top-left corner. You have now confirmed the changes done to your project.

If you want to play it on any other device, tap the Share button at the bottom after choosing the Done tab and select Save Video to export it.

Part 4: Audio Editing Tips for iMovie Users

Here are some guidelines or tips for various audio editing processes, starting from cutting trim music on iMovie, using iMovie to trim audio and video together, and other audio and video editing tips.

• Use Waveforms to See What You Hear

Sound is just as relevant as the images in a video, and should focus just as much during editing. To efficiently and adequately edit audio, you need a good set of speakers and headphones to hear the sound, and you also need to be able to see the sound.

If the waveforms don’t appear, go to the “view” drop-down menu and select “show waveforms”, the waveform would show you the sound intensity level of a sound clip and definitely would give you an idea of what part will need to be turned up or down.

• Audio Adjustments

With the audio button situated at the top right, you have access to some essential audio editing tools for changing the sound level of your chosen clip or changing the relative volume of other films in the project.

The audio editing window also contains primary noise reduction and audio equalization tools and a range of effects – from robot to echo- which would affect how people sound in your video.

• Editing Audio with the Timeline

iMovie permits you to adjust the audio within the clips themselves, each volume as a bar. You can shift up and down to increase or decrease the audio level. The clips also have “fade in” and “fade out” buttons at the beginning and end, which are draggable to adjust the fade length.

Conclusion

Finally, with the answers to the question, how to cut audio in iMovie, you can follow the simple step guide and feel free to edit your audio or video to your taste using iMovie or Wondershare Filmora.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Apr 30, 2024• Proven solutions

Sometimes, we find the desired audio or soundtrack for our videos longer or shorter than we want, and that is where audio editing comes. Audio editing refers to manipulating audio to alter the length, speed, and volume or create additional effects such as loops. Are you new to audio trimming? Don’t worry, as our article today would show how to cut audio in iMovie on Mac and iPhone.

Part 1: How to Cut Music in iMovie on Mac?

Cutting music is audio editing carried out when the music or soundtrack seems longer than desired. To cut music or soundtrack in iMovie using Mac involves the following steps:

Step 1: Adjust the Playhead to Cut the Clip

You can cut an audio clip only when the specified audio is in the timeline. To perform the operation, right-click on the clip and pick out a split clip. This operation cuts the clip into two and divides the two pieces wherever the playhead is situated.

Step 2: Select Split Clip

Right-click and select the Split Clip. Once this step is over, you have successfully cut the audio clip.

Part 2: Cut Audio in iMovie Alternative – Wondershare Filmora

Generally, as humans, we feel more satisfied when we have options or choices because we get fed up with doing the same over and over again the same way without changes. Wondershare Filmora is an alternative for iMovie and can easily carry out the function of various forms of audio editing.

If you wish to trim off the beginning or the ending of a mp3 file quite swiftly, this section is for you. Things can get specifically weird if you want to import heavy mp3 files to your space-limited MP3 player to play.

You’re required to choose an intelligent MP3 trimmer to trim an MP3 file to any length. Here, we suggest this robust video editing software — Wondershare Filmora, which enables you to precisely extract an MP3 file or audio segment effortlessly without losing any original audio quality.

You can get both the Windows and Mac versions of this great video editor. It embodies the following features:

• Import videos, audio, or photos from various sources and edit them in one place.
• Three different video cutting methods to meet different editing needs.
• Various editing tools help you edit the video completely, including rotation, picture-in-picture, green screen, cropping, etc.
• Output the edited video to more than 20 different formats or locations as needed.
• Use more than 1,000 video effects in the effect store to customize videos.

Using Filmora is quite effortless. The following tutorial will display how to cut audio in it easily and quickly.

Step 1: Import MP3 Files for Editing

Firstly, drag the specific MP3 file or audio clip into the media library, or you can directly import audio files or video from portable devices such as your digital camera, smartphone, or camcorder, etc.

Step 2: Drag MP3 Files to the Timeline below for Cutting

Filmora provides two ways to cut audio/video files. You can either select to cut from the beginning or the end by trimming. You can also split it into various segments from the mid-sections.

Move the slider ahead to the cutting point within the midsection, and then tap the scissor icon to split it into little sections as desired.

When executed, please select the part that you don’t want to, hit the Delete button to remove.

Step 3: Export to Save

Hit the Export tab to save your edited project. If you want to save in the original MP3 format, select MP3 before you export.

Part 3: How to Trim Music in iMovie on iPhone

This section will offer you a guide on how to cut out parts of audio in an iMovie project on an iPad or iPhone. After adding music to your project, the audio is trimmed to the desired length using iMovie’s inbuilt tool.

Step #1: Open iMovie on your iPhone or iPad.

Step #2: Tap the movie project you want to edit.

It will display a list of your projects, among which you must select the one you want to edit.

If you want to edit a current section of video not even opened in iMovie, you have to make a new iMovie project to add your audio and video. Select the + icon, choose the Movie tab, select the video(s), and then choose the Create movie button.

Step #3: Hit the Edit button below the name of your project.

This opens your project in the editor. And, you’re already in the editor if you just created a new project in the previous step.

Step #4: Add audio to your project.

You can skip this step if your project already contains the audio. Hit the + icon in the upper-left timeline’s corner.

Choose Audio.

Go with a specific category:

Soundtracks are audio tracks provided by iMovie which are free to use in your project.

Select My Music to locate the file and use a song from iTunes or the music app.

Sound effects are shorter sounds—mostly below 10 seconds duration.

Choose an audio file for the preview.

Select the + icon to add the file to your project.

Step #5: Hit the audio bar on the timeline.

It is present below the multi-frame version of your video in the screen’s bottom area.

Now, detach the MP3 segment or audio from the video by tapping the video on the timeline and selecting the Detach button at the screen’s bottom area.

Step #6: Tap and drag the beginning of the audio track.

Drag or move the audio track to the exact point where you wish it to start from—the audio track’s left-end marks of the yellow bar starting your audio.

Step #7: Tap and drag the end of the audio track.

You can drag the yellow bar at the end and move it to the exact point where you want the audio to end.

If you can’t see the yellow bar on the far-right end of the audio track, swipe left below the audio track to scroll to the end.

To move the audio track to another location, select and hold it for about one second, and then move it to the desired video’s location.

Step #8: Select the Play tab for preview.

It’s the sideways triangle just below the video preview.

Step #9: Select the Done button when you’re finished.

It is present at the screen’s top-left corner. You have now confirmed the changes done to your project.

If you want to play it on any other device, tap the Share button at the bottom after choosing the Done tab and select Save Video to export it.

Part 4: Audio Editing Tips for iMovie Users

Here are some guidelines or tips for various audio editing processes, starting from cutting trim music on iMovie, using iMovie to trim audio and video together, and other audio and video editing tips.

• Use Waveforms to See What You Hear

Sound is just as relevant as the images in a video, and should focus just as much during editing. To efficiently and adequately edit audio, you need a good set of speakers and headphones to hear the sound, and you also need to be able to see the sound.

If the waveforms don’t appear, go to the “view” drop-down menu and select “show waveforms”, the waveform would show you the sound intensity level of a sound clip and definitely would give you an idea of what part will need to be turned up or down.

• Audio Adjustments

With the audio button situated at the top right, you have access to some essential audio editing tools for changing the sound level of your chosen clip or changing the relative volume of other films in the project.

The audio editing window also contains primary noise reduction and audio equalization tools and a range of effects – from robot to echo- which would affect how people sound in your video.

• Editing Audio with the Timeline

iMovie permits you to adjust the audio within the clips themselves, each volume as a bar. You can shift up and down to increase or decrease the audio level. The clips also have “fade in” and “fade out” buttons at the beginning and end, which are draggable to adjust the fade length.

Conclusion

Finally, with the answers to the question, how to cut audio in iMovie, you can follow the simple step guide and feel free to edit your audio or video to your taste using iMovie or Wondershare Filmora.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Enhancing Your MP4 Visuals with Premium Music Selection Techniques

How to Add Audio to MP4 (MPEG, MPG) Video

Shanoon Cox

Mar 27, 2024• Proven solutions

Chances are you want to create a new work by adding an audio track to your source video like MP4. This is because your MP4 file has very good video quality, but gets rather bad sound. Or you just create it for fun.

Well, this is not a difficult thing once you get an efficient video tool like Wondershare Filmora . As a professional and easy-to-use video editing application, it helps you add any music to MP4 video effortlessly. What’s more, it also helps to remove or mute your original audio track to achieve the best result if necessary. Record your own voice-over is also possible.

Powerful Video Editing Tool: Wondershare Filmora

Supports almost all kinds of audio formats including MP3, WMA, MKA, M4A and more;

• Add audio to video without quality loss;
• Export your new video in different ways;
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

1. Import your media files

Either click “Import” or drag and drop your MP4 video & audio track to this program. When all files imported, they’ll show in thumbnails in the Media library. Now drag and drop them into the their respective track on the Timeline.

2. Remove original audio file (optional)

You can remove the original audio in a pretty easy way if you want. To do this, just right click the video clip on Timeline, and select “Audio Detach”. or “Mute” as per your needs. If “Audio Detach” has been selected, you’ll find a single audio file appearing in the Music Timeline immediately. Then you can easily delete it.

3. Add audio to MP4 video

When all files come to place, you can begin to make the audio and video perfectly matched. In the Video Timeline, cut and paste any video clip to rearrange the order, and trim out unwanted portion while keeping the others. (Note: Don’t overlap one into another, or you’ll split the original file).

Now play your source MP4 video, and drag the audio track to the exact position that you want it to begin. If you just want a short part showing up, pause it when it comes to the right place. Then click the Scissors icon above the Timeline to split it into two parts. Keep what you want, and remove the others by hit “Delete” on the keyboard. Note that you can always click Undo/Redo to control your operation.

4. Adjust the audio file (optional)

After syncing your music file and MP4 video perfectly, you can further adjust the audio file in the editing panel, like change the playing speed, volume, pitch, etc. To do this, just double click the target MP4 video file and edit it in the pop up window.

5. Save and share your creation

Check your video in the right previewing window. When you’re satisfied, click “Create” to export your new work. This program offers four flexible ways letting you save and share video with ease. In the format tab, you’ll find almost all popular formats are available to save on your computer. If you want to share your masterpiece on YouTube, select this option to upload it right away. Even you can burn a DVD disk in minutes to watch it on your home cinema.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Chances are you want to create a new work by adding an audio track to your source video like MP4. This is because your MP4 file has very good video quality, but gets rather bad sound. Or you just create it for fun.

Well, this is not a difficult thing once you get an efficient video tool like Wondershare Filmora . As a professional and easy-to-use video editing application, it helps you add any music to MP4 video effortlessly. What’s more, it also helps to remove or mute your original audio track to achieve the best result if necessary. Record your own voice-over is also possible.

Powerful Video Editing Tool: Wondershare Filmora

Supports almost all kinds of audio formats including MP3, WMA, MKA, M4A and more;

• Add audio to video without quality loss;
• Export your new video in different ways;
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

1. Import your media files

Either click “Import” or drag and drop your MP4 video & audio track to this program. When all files imported, they’ll show in thumbnails in the Media library. Now drag and drop them into the their respective track on the Timeline.

2. Remove original audio file (optional)

You can remove the original audio in a pretty easy way if you want. To do this, just right click the video clip on Timeline, and select “Audio Detach”. or “Mute” as per your needs. If “Audio Detach” has been selected, you’ll find a single audio file appearing in the Music Timeline immediately. Then you can easily delete it.

3. Add audio to MP4 video

When all files come to place, you can begin to make the audio and video perfectly matched. In the Video Timeline, cut and paste any video clip to rearrange the order, and trim out unwanted portion while keeping the others. (Note: Don’t overlap one into another, or you’ll split the original file).

Now play your source MP4 video, and drag the audio track to the exact position that you want it to begin. If you just want a short part showing up, pause it when it comes to the right place. Then click the Scissors icon above the Timeline to split it into two parts. Keep what you want, and remove the others by hit “Delete” on the keyboard. Note that you can always click Undo/Redo to control your operation.

4. Adjust the audio file (optional)

After syncing your music file and MP4 video perfectly, you can further adjust the audio file in the editing panel, like change the playing speed, volume, pitch, etc. To do this, just double click the target MP4 video file and edit it in the pop up window.

5. Save and share your creation

Check your video in the right previewing window. When you’re satisfied, click “Create” to export your new work. This program offers four flexible ways letting you save and share video with ease. In the format tab, you’ll find almost all popular formats are available to save on your computer. If you want to share your masterpiece on YouTube, select this option to upload it right away. Even you can burn a DVD disk in minutes to watch it on your home cinema.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Chances are you want to create a new work by adding an audio track to your source video like MP4. This is because your MP4 file has very good video quality, but gets rather bad sound. Or you just create it for fun.

Well, this is not a difficult thing once you get an efficient video tool like Wondershare Filmora . As a professional and easy-to-use video editing application, it helps you add any music to MP4 video effortlessly. What’s more, it also helps to remove or mute your original audio track to achieve the best result if necessary. Record your own voice-over is also possible.

Powerful Video Editing Tool: Wondershare Filmora

Supports almost all kinds of audio formats including MP3, WMA, MKA, M4A and more;

• Add audio to video without quality loss;
• Export your new video in different ways;
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

1. Import your media files

Either click “Import” or drag and drop your MP4 video & audio track to this program. When all files imported, they’ll show in thumbnails in the Media library. Now drag and drop them into the their respective track on the Timeline.

2. Remove original audio file (optional)

You can remove the original audio in a pretty easy way if you want. To do this, just right click the video clip on Timeline, and select “Audio Detach”. or “Mute” as per your needs. If “Audio Detach” has been selected, you’ll find a single audio file appearing in the Music Timeline immediately. Then you can easily delete it.

3. Add audio to MP4 video

When all files come to place, you can begin to make the audio and video perfectly matched. In the Video Timeline, cut and paste any video clip to rearrange the order, and trim out unwanted portion while keeping the others. (Note: Don’t overlap one into another, or you’ll split the original file).

Now play your source MP4 video, and drag the audio track to the exact position that you want it to begin. If you just want a short part showing up, pause it when it comes to the right place. Then click the Scissors icon above the Timeline to split it into two parts. Keep what you want, and remove the others by hit “Delete” on the keyboard. Note that you can always click Undo/Redo to control your operation.

4. Adjust the audio file (optional)

After syncing your music file and MP4 video perfectly, you can further adjust the audio file in the editing panel, like change the playing speed, volume, pitch, etc. To do this, just double click the target MP4 video file and edit it in the pop up window.

5. Save and share your creation

Check your video in the right previewing window. When you’re satisfied, click “Create” to export your new work. This program offers four flexible ways letting you save and share video with ease. In the format tab, you’ll find almost all popular formats are available to save on your computer. If you want to share your masterpiece on YouTube, select this option to upload it right away. Even you can burn a DVD disk in minutes to watch it on your home cinema.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Chances are you want to create a new work by adding an audio track to your source video like MP4. This is because your MP4 file has very good video quality, but gets rather bad sound. Or you just create it for fun.

Well, this is not a difficult thing once you get an efficient video tool like Wondershare Filmora . As a professional and easy-to-use video editing application, it helps you add any music to MP4 video effortlessly. What’s more, it also helps to remove or mute your original audio track to achieve the best result if necessary. Record your own voice-over is also possible.

Powerful Video Editing Tool: Wondershare Filmora

Supports almost all kinds of audio formats including MP3, WMA, MKA, M4A and more;

• Add audio to video without quality loss;
• Export your new video in different ways;
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

1. Import your media files

Either click “Import” or drag and drop your MP4 video & audio track to this program. When all files imported, they’ll show in thumbnails in the Media library. Now drag and drop them into the their respective track on the Timeline.

2. Remove original audio file (optional)

You can remove the original audio in a pretty easy way if you want. To do this, just right click the video clip on Timeline, and select “Audio Detach”. or “Mute” as per your needs. If “Audio Detach” has been selected, you’ll find a single audio file appearing in the Music Timeline immediately. Then you can easily delete it.

3. Add audio to MP4 video

When all files come to place, you can begin to make the audio and video perfectly matched. In the Video Timeline, cut and paste any video clip to rearrange the order, and trim out unwanted portion while keeping the others. (Note: Don’t overlap one into another, or you’ll split the original file).

Now play your source MP4 video, and drag the audio track to the exact position that you want it to begin. If you just want a short part showing up, pause it when it comes to the right place. Then click the Scissors icon above the Timeline to split it into two parts. Keep what you want, and remove the others by hit “Delete” on the keyboard. Note that you can always click Undo/Redo to control your operation.

4. Adjust the audio file (optional)

After syncing your music file and MP4 video perfectly, you can further adjust the audio file in the editing panel, like change the playing speed, volume, pitch, etc. To do this, just double click the target MP4 video file and edit it in the pop up window.

5. Save and share your creation

Check your video in the right previewing window. When you’re satisfied, click “Create” to export your new work. This program offers four flexible ways letting you save and share video with ease. In the format tab, you’ll find almost all popular formats are available to save on your computer. If you want to share your masterpiece on YouTube, select this option to upload it right away. Even you can burn a DVD disk in minutes to watch it on your home cinema.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: